Bobrick Washroom Equipment, Inc.

11611 Hart Street
North Hollywood, California 91605-5882
United States
Telephone: 800-553-1600 or 818-982-9600.
Fax: 818-765-2700.
Web: http://www.bobrick.com.
Email: info@bobrick.com.

Products manufactured by Bobrick Washroom Equipment, Inc. (listed alphabetically)

1. 90 DEGREE ANGLE

   Stainless steel 90 degree angle grab bar. 16 inches or 32 inches high. Specify right or left facing vertical. Concealed or exposed mounting. Diameter 1 1/4 inches or 1 1/2 inches. Wall clearance 1 1/2 inches. Satin finish or peened non slip finish.

2. BOBRICK HAND DRYERS (MODELS B700, B750, B701, & B751)

   Hot air hand dryer. Easily operated with one hand. Direction of air is easily adjusted. Also available with auto pilot, no touch operation. Electronic sensor automatically turns dryer on and off by sensing hand movement.

3. CONSOLE (MODELS B-5780 & B-5781)

   Lavatory with blade faucets, meets ANSI A117.1 1980 specifications. Wall hung model, stainless steel. 18 by 15 1/4 inches, 4 inch apron. Mirror, soap, towel and cup dispensers, waste receptacle, light, electrical outlet, optional.

4. FIXED TILT MIRROR (MODEL B-293)

   Stainless steel frame with float/plate glass mirror. Extends 4 inches from wall at top and tapers to 1 inch at bottom. 16 inches by 30 inches.

5. FOLDING SHOWER SEAT (MODEL B-508)

   The Folding Shower Seat, model B-508, is a stainless steel corner shower bench designed to allow persons with mobility disabilities to sit while bathing. The unit folds and is wall attached. DIMENSIONS: 15.5 inches square.

6. FOLDING SHOWER SEAT (MODELS B-517/518 & B-5171/5181)

   L shaped folding shower seat, stainless steel tubular frame, self locking mechanism. 32 inches wide, projects 23 inches from wall. White fabric reinforced vinyl seat or solid phenolic slats. Left or right models.

7. FOLDING SHOWER SEAT (MODELS B-519 & B-5191)

   Rectangular folding shower seat, stainless steel frame, self locking mechanism. 18 inches wide. Projects 16 inches from wall. White fabric reinforced vinyl seat or solid woodgrain phenolic slats.

8. GRAB BAR FOR WALL

   Stainless steel straight grab bar, available in six inch increments from 12 to 48 inches. Concealed or exposed mounting. 1 inch, 1 1/4 or 1 1/2 inch diameter. 1 1/2 inch wall clearance. Satin finish or peened non slip finish.

9. SAFETY RAILING (MODELS B-602, 603, & 605)

   Stainless steel hand rail, curved end supports and underslung intermediate supports. Diameter 1 1/4 or 1 1/2 inches. Satin finish only. 1 1/2 inch wall clearance. For lengths over 4 feet only.

10. SIDE BAR WITH OUTRIGGER.

    Stainless steel U shaped grab bar. Both ends and top brace attach to wall. Specify right or left. Concealed or exposed mounting. Diameter 1 inch or 1 1/4 inches. Satin finish or peened non slip finish. 30 inch projection, 24 inch height.

11. STRADDLE GRAB BAR FOR TOILET (MODELS B-6828, B-58662, & B-6162)

    Stainless steel grab bar mounts on wall with V shaped extensions on both sides of toilet. Functions as toilet safety frame. Concealed or exposed mountings. 1 inch, 1 1/4 or 1 1/2 inch diameter. Satin finish or peened non slip finish.

12. SWING AWAY GRAB BAR (MODELS B-4993 & 4995)

    Stainless steel swing away grab bar, for mounting beside toilet. Wall to floor mount, or dual wall mount. Toilet tissue dispenser attached to frame. 1 1/4 inch diameter, satin finish only.

13. TILT MIRROR (MODEL B-294 X)

    Stainless steel frame with float/plate glass mirror. Tilts 7 inches from wall with self-locking mechanism. Bottom attached with full length hinge. 16 inches by 24 inches or 16 inches by 30 inches.

14. TOILET COMPARTMENT (1030 SERIES)

    Accessible restroom stall partitions. Custom made to fit field conditions. Outswinging door optional. Latching device easily grasped. Mounts on ceiling or floor. Plastic laminate with steel edge. In case of emergency compartment can be opened from outside by lifting door to disengage latch.

15. TOILET COMPARTMENTS (1040 SERIES)

    Accessible restroom partitions. Custom made to fit field conditions. Optional outswinging door. Latching device easily grasped. Mounts on ceiling or floor. Plastic laminate composition. In case of emergency compartment can be opened from outside by lifting door to disengage latch.

16. TOWEL DISPENSER

    Towel dispenser. Mounted with highest operating device 48 inches above the floor. Operated by pulling individual towel.

17. TOWEL DISPENSER (MODEL B-3860)

    Towel dispenser mounted with highest operating device 48 inches above the floor. Optional operation by pulling individual towel, turning crank, or pulling with two hands. Easily grasped knobs or controls.

18. TWO WALL GRAB BAR

    Stainless steel corner grab bar. Concealed or exposed mountings. 1, 1 1/ 4 or 1 1/2 inch diameter. 1 1/2 inch wall clearance. Satin finish or peened non slip finish. 24 by 36 inches, 24 by 24 inches, or 36 by 48 inches.

19. TWO WAY TUB BAR

    Stainless steel corner grab bar with 90 degree end extension. 48 inches by 20 inches by 32 inches high. Specify right or left. Concealed or exposed mountings. 1 inch, 1 1/4 or 1 1/2 inch diameter. 1 1/2 inch wall clearance. Satin finish or peened non slip finish.

20. WALL TO FLOOR GRAB BAR

    Stainless steel grab bar attaches wall to floor, 30 by 33 inches. Floor end mounts in socket inserted in floor. Concealed or exposed mountings. 1 inch, 1 1/4 or 1 1/2 inch diameter. Satin finish, or peened non slip finish.

21. WALL TO FLOOR GRAB BAR WITH OUTRIGGER

    Stainless steel grab bar, attaches to wall and floor, 30 by 33 inches. 6 inch side extension attaches to floor. Specify right or left. Concealed or exposed mounting. 1 inch, 1 1/4 or 1 1/2 inch diameter. Satin finish or peened non slip finish.

See Bobrick Washroom Equipment, Inc. products that are no longer available.