McCarty's Sacro-Ease, LLC

3329 Industrial Avenue
Coeur d'Alene, Idaho 83815
United States
Telephone: 800-635-3557 or 208-765-8408.
Fax: 208-664-6891.
Web: http://www.mccartys.com.
Email: SACROEASE@aol.com.

Products manufactured by McCarty's Sacro-Ease, LLC (listed alphabetically)

1. KOMFORT KUSH

   The Komfort Kush is wedge foam seat cushion with a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. This cushion slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It is constructed of high density poly foam with an ultra-suede cover that is removable for easy cleanup. It has a non-slip bottom and a carrying handle for easy transport. DIMENSIONS: The cushion is 3 inches thick in the rear and slopes down to be 1 inch thick in the front. COLORS: Black, blue, grey, brown, and light brown. WARRANTY: 5-year limited warranty.

2. LIL' DESK MATE

   The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the desks surface for a person who is sitting or reclined. The table is constructed of all-natural oak with a satin finish and metal fittings. Assembly is required. DIMENSIONS: The height adjusts from 26.5 to 40.0 inches . The desktop (WxD) is 31 x 16 inches, and the gap between the desktop sections is .125 inches. The fixed surface (WxD) is 8 x 16 inches. The base (WxDxH) is 26 x 16 x 5 inches, and requires 5.05 inch floor clearance to roll under a chair, sofa or bed. CAPACITY: 40 pounds. WEIGHT: 21 pounds. COLOR: Dark walnut, walnut, cherry, teak, and black.

3. PEACH PILLOW & PEACH BLOSSOM

   The Peach Pillow and Peach Blossom are cervical pillows designed for provide orthopedic support to relieve pain associated with upper back and neck problems, arthritis, or tension headaches. These pillows have built-in rolls to provide support under the user's neck. Both are made with poly foam and holofil. The Peach Blossom Pillow is the same internally as the Peach Pillow except that the rolls are wrapped with memory foam. SIZES: Queen or Travel. DIMENSIONS (LxW): 16 x 23 inches. WARRANTY: 1-year limited warranty.

4. SACRO EASE (MODELS BWC, BWCS, WC & WCS)

   The Sacro-Ease, Model BWC, BWCS, WC and WCS, seat supports are designed to provide individuals in a wheelchair support under the hips and behind the lumbar spine. Models BWC and BWCS feature a backrest that clamps to wheelchair upright. Models WC and WCS are seats only. The seat supports for all models are made of two one-inch polyfoam cushions with steel frame and latex rubber support bands between the layers of foam. The foam is covered with a removable, washable and waterproof cover. The difference between the "S" models is size. The manufacturer can design posture products to fit any unusual sitting situation on a special order basis. DIMENSIONS: Model BWC fit standard 18 inch wheelchairs, Model BWCS fit 16 inch wheelchair; Model WC fit 18 inch wheelchair and Model WCS fit 16 inch wheelchair. WARRANTY: 5-year limited warranty

5. SACRO EASE (MODELS RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM & BRNC-RX)

   The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with the seat cushion on a foldable steel frame. These models can be used with auto and truck seats. All cushions are upholstered with woven fabric designed to withstand heavy use, and the seat cushions for all models have rubber strap supports and a durable non-skid bottom. Leatherette upholstery is available upon request. The cushions may be cleaned with mild soap and water and a soft brush. They may be placed in the sunlight to dry. Fitting instructions are included. The manufacturer can design posture products to fit most usual sitting sitations. DIMENSIONS: Seat width is 12 inches (models RNC RX and BRNCRX), 15 inches (RSC RX and BRSCRXM), and 19 inches (RC RX and BRCRX); seat depth is 15 inches; back height is 19 inches for models BRC-RX, BRSC-RXM and BRNC-RX; the cutout at the rear of the seat cushion (LxW) is 9 x 2.75 inches. COLORS: Black, blue, charcoal, grey, brown, and red. WARRANTY: 5-year limited warranty.

6. SACRO EASE KERI BACK CUSHION (MODELS KBT & KBN)

   The Sacro Ease Keri Back Cushion, models KBT and KBN, is a back support cushion designed to reduce back fatigue, ease lower back pain for individuals who have back injuries or posture problems. Designed for taller users, this back support cushion has a steel frame, rubber and 1 inch of memory foam in the back. It is bendable for additional support and has a four way strapping system to fit most office chairs and car seats. DIMENSIONS (HxW): 18 x (15 or 12) inches. WEIGHT: 5 pounds. COLORS: Black, dark blue, gray, basil, and pebble, smoke, wine and chocolate.

7. SACRO EASE SPORTS PORTABLE

   The Sacro-Ease Sports Portable is a seat and back support designed for use at spectator sports events. The seat support may be used with or without the existing backrest. The seat closes to be carried like a briefcase. The seat support is manufactured with .5 inch of polyfoam on top of a bendable carbon steel frame with rubber supports. The upholstery is water-resistant fabric. The back support has a built-in lumbar support pad. The Sports Portable has a non-skid bottom, and it is available with horizontal or vertical straps. The manufacturer can design postures products to fit most any unusual sitting situation. DIMENSIONS (HxWxD): 19 x 14 x 15 inches. COLORS: Black, blue, red, grey, purple and royal blue. WARRANTY: 5-year limited warranty.

8. SACRO EASE STANDARD (MODELS BR, BRSM & BRN)

   The Sacro Ease Standard, models BR, BRSM and BRN, is a back support cushion are designed for office chairs and auto and truck bucket seats with existing firm bottoms. This product features a seat bottom and backrest with adjustable lumbar pad on a foldable steel frame with rubber strap supports and a non-skid bottom. The Sacro Ease Standard provides support under the hips and behind the lumbar spine. The units are designed to fit to the individual and not the seat, thus the unit can be moved from one seat to another. All the cushions are covered with soft woven fabric designed to withstand heavy use. The upholstery may be cleaned with mild soap, water and a soft brush and put in the sunlight to dry. Fitting instructions for orthopedic models are included. The manufacturer can designed posture products for most unusual sitting situation. DIMENSIONS: Seat width is 12 inches (model BRN), 15 inches (BRSM), and 19 inches (BR); seat depth is 15 inches; back height is 19 inches. COLORS: Black, blue, charcoal, grey, brown, and red. WARRANTY: 5-year limited warranty.

9. STARLITE PILLOW

   The Star-Lite Pillow is a cervical pillow designed for use by individuals with neck pain. The pillow comes in sizes for taller or shorter individuals and in two different densities of memory foam: semi-soft or semi-firm. This pillow is available in Regular (made with a softer foam with two different sized neck rolls); Deluxe Thin (made with Visco Elastic Gel Foam for a person 5 foot 9 inches and under); and Deluxe Thick (made with Visco Elastic Gel Foam for a person 5 foot 10 inches or taller).

10. WEDGE EASE

    The Wedge Ease is wedge foam seat cushion that slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It has a removable insert in that when removed, forms a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. It is constructed of poly foam and memory foam with a cover that is removable and washable. It has a non-slip bottom. DIMENSIONS: The cushion is 3 inches thick in the rear and slopes down to be 1 inch thick in the front. COLORS: Black, blue, grey, brown, and light brown. WARRANTY: 5-year limited warranty.

See McCarty's Sacro-Ease, LLC products that are no longer available.