Southpaw Enterprises Inc

PO Box 1047
Dayton, Ohio 45401
United States
Telephone: 800-228-1698 or 937-252-6460.
Fax: 937-252-8502.
Web: http://www.southpawenterprises.com.
Email: therapy@southpawenterprises.com.

Products manufactured by Southpaw Enterprises Inc (listed alphabetically)

1. AIR STATION (MODEL 1369)

   The Air Station, model 1369, is an air pump designed to be a high pressure inflator, as well as a low-pressure inflator/deflator. It comes completely assembled and includes an attached storage bag for all the additional fittings.

2. AUTO HEIGHT ADJUSTOR (MODEL 5100)

   The Auto Height Adjustor, model 5100, is a mechanical lifting device for adjusting suspended equipment to the right height for the user. It is operated by a hand held crank which lifts the equipment with or without the client. The Auto Height Adjustor can be used from any one point suspension system and fits into the same ceiling bolt as the Rotational Device (see separate entry). OPTIONS: Battery operated crank, model 5200, with two rechargeable batteries is available for $339.00. DIMENSIONS: Lifting range is eight to twelve foot ceiling height. CAPACITY: Working load is 800 pounds. GUARANTEE: One full year from date of shipment.

3. BALANCE FUN SET

   The Balance Fun Set is a balance training device designed for use with children with balance, neurological, or mobility disabilities. The set is made up of four separate pieces of a full circle, all of which can be used individually for multiple activities, or together as a single unit. The interchangeable set can be used to rock, roll, balance, or climb. The front, back, and sides of the pieces all provide different surfaces and ideas for play. The pieces may be place on their sides to create a balance beam.

4. BALL PIT TENT (MODEL 1440)

   The Ball Pit Tent, model 1440, is a tent designed to provide tactile stimulation and vestibular and proprioceptive input for individuals with physical disabilities. The tent is a junior version of the standard tent with an added mat floor. It is ideal for smaller children who may be intimidated by the larger ball pit. For gravitationally insecure children it provides a sense of weightlessness. The mat base folds for transportation and storage and the tent is easily disassembled. DIMENSIONS: Tent is 48 x 48 inches. Mat is 58 x 58 inches. GUARANTEE: One full year from shipping date.

5. BALL POOL WITH NET CANOPY (MODEL 1400)

   The Ball Pool with Net Canopy, model 1400, is designed to provide tactile stimulation and vestibular and proprioceptive input for clients of all ages with a physical disability. The ball pool provides a number of motor training and visually stimulating activities from just standing in the pool practicing balance to diving in from the side. The larger balls are designed to soften the impact of jumping and diving into the pool. The pool encourages imagination and is ideal for the gravitationally insecure. It has soft rigid sides that offer stability and a padded ledge for sitting. It is easy to clean and store and comes with 2500 three inch multi-colored balls and a canopy. OPTIONS: The Pool, model 1405, is available without balls or net for $1250.00. The Canopy and Supports, model 1401, is sold separately for $329.00. Plastic balls, model 1408, are also sold separately at $169.00 for 500 mixed color balls. Single color balls are aslo available upon request. DIMENSIONS: Pool has 15 inch walls and a six foot diameter. The canopy is eight feet high at center. GUARANTEE: One full year from shipping date.

6. BILATERAL ACCESSORY (MODEL 1010)

   The Bilateral Accessory, model 1010, is an overhead pulley exerciser designed to work on flexion/extension patterns, bilateral activity, gross motor planning and vestibular balance for persons with physical handicaps. It is meant to be used with the Southpaw Bolster Swing (see separate entry) for clients of all ages. It can also be adapted to most other Southpaw suspended equipment. The Bilateral Accessory comes with a rope, pulley, two adjustable handles and a special snap. GUARANTEE: One full year from shipping date.

7. CHAIR BALLS (MODELS 1380, 1381 & 1382)

   The Chair Ball, models 1380, 1381 and 1382, is a ball with feet designed to add a visual challenge when bounced and stability when used as a seat for individuals who are phyisically challenged. The prongs are convenient for clients who can not normally carry a ball and can be easily thrown with one hand so they are good for people with little motor contral or strength in their arms. The balls are made of heavy vinyl. DIMENSIONS: Available with the following diameters: 13, 21 and 25 inches. COLORS: Vary. GUARANTEE: One full year from shipping date.

8. CUSTOM EXPANSION BEAM (MODEL 7005)

   The Custom Expansion Beam, model 7005, is an addition to the Custom Support Structure (see separate entry) designed to provide additional eye bolts for suspended equipment. This structure allows you to achieve diagonal, vertical, four corner and 90 degree movement without taking up additional space. DIMENSIONS: Beam is 36 inches. CAPACITY: Working load is 700 pounds. WEIGHT: 55 pounds.

9. DOLPHIN AIR MAT (MODEL 1324)

   The Dolphin Air Mat, models 1325 and 1326, is an air flotation mattress designed to provide vestibular or proprioceptive stimulation for individuals with a physical disability. It is also good for working with postural adjustments, sensory stimulation, motor planning tasks, weight shifting exercises, equilibrium responses and balance activities. OPTIONS: The Dolphin Tactile Pad, model 1323, is a reversible patchwork pillowcase of four different textures available for $59.00. DIMENSIONS: Uninflated: 42 x 42 inches. CAPACITY: Working load is 100 pounds. GUARANTEE: One full year from shipping date.

10. EASY STRINGER SET (MODEL 3362)

    The Easy Stringer Set, model 3362, is a set of beads and tubing designed to enhance eye hand coordination for children with fine motor or neurological disabilities. This product encourages finger manipulation as the child strings the visually stimulating beads on flexible plastic tubing. The bead come in two sizes and can be used to teach sorting skills by different colors and shapes. The set includes 20 beads in assorted sizes and shapes and two vinyl stringing tubes. COLOR: The tubing is clear and the beads come in a variety of colors. GUARANTEE: One full year from shipping date.

11. EQUILIBRIUM FLOOR DISC (MODELS 1940 & 1941)

    The Equilibrium Floor Disc, models 1940 and 1941, is a balance board designed to facilitate postural adjustments and equilibrium reactions for children who have physical disabilities. This product is convenient for therapists who must work without a ceiling hookup. The bubble is made of strong clear plastic and the top disc is a carpet covered, long-lasting birch plywood piece with handles. The edges are also padded to protect fingers. DIMENSIONS: 24 inches in diameter. Available in six or ten inch depth. CAPACITY: Working load 250 pounds. Weight: 12 pounds. GUARANTEE: One full year from shipping date.

12. EYE BOLT WRAP AND SWIVEL EYE BOLT WRAP (MODELS 7002 & 7001)

    The Eye Bolt Wrap, model 7001, is hardware for therapuetic suspension equipment designed to be used with the Custom Support Structure (see separate entry). This device allows the therapist to add as many eye bolts and position them as needed to accomodate the client and the equipment. The "eye" of the Eye Bolt Wrap is slightly larger than the standard Eye Bolt on the Custom Support Structure which will increase its lifespan. Also Available is the Swivel Eye Bolt Wrap, model 7002, which also has a larger diameter. It includes a rotational device which saves six to eight inches of space. CAPACITY: Working load 1,000 pounds. WEIGHT: Eye Bolt Wrap is 5-1/2 pounds. Swivel Eye Bolt Wrap is 7 pounds. GUARANTEE: One full year from shipping date.

13. FEEL AND MATCH TEXTURES (MODEL P2206)

    Set of twelve 3 1/2 inch disks used in tactile discrimination training. Feel and match textures comes in 6 color and texture matched pairs; textures include brocade, plastic, felt, rubber and denim.

14. GOING (MODELS 3800 & 3801)

    The Going, models 3800 and 3801, is an activty designed develop eye hand coordination and challenge motor planning skills for individuals with a physical disability. It is basically a football shaped object (the going) attached to two strings. On the end of the strings are handles with special protestors. The clients move the going back and forth by pulling the strings apart from one another. SIZES: Medium and large. DIMENSIONS: Length of string from one set of handles to the other set is 14 feet. (Length is adjustable). GUARANTEE: One full year from shipping date.

15. GYMNASTIK BALL

    Gymnastik Balls are inflatable seamless molded vinyl balls designed specifically for therapy and exercise for children with neurological, balance, or severe physical disabilities. DIMENSIONS: Balls are available in 12-, 16-, 20-, 24-, 33-, 37- or 49-inch diameters. OPTIONS: Wall-mounted ball storage holders. COLOR: Assorted bright colors depending on size.

16. HANG N ROLL BOLSTERS (MODELS 1020,1022,1024,1026)

    A Hang-n-Roll Bolster, models 1020, 1022, 1024, 1026, is a bolster that can be used as a vertical bolster, pony bolster, or a floor bolster for individuals with a physical disability. By hanging it vertically or horizontally from the tightly secured straps on either end it can be used for climbing and hanging for gravitationally insecure clients. It can be used to challange postural adjustments and balance reactions as well as facilitate motor skills. By putting the bolster on the floor it can act as a therapy roll or positioning cushion. Each bolster is a Bi-foam roll covered in heavy-duty reinforced vinyl. DIMENSIONS: (Diameter x length) 6 x 24 inches, 8 x 36 inches, 10 x 36 inches and 12 x 36 inches. CAPACITY: Working load is 300 pounds. COLORS: Available in yellow, blue, red and green respective to size. GUARANTEE: One full year from shipping date.

17. HANG N ROLL CONVERSION KIT (MODELS 1030,1032,1034,1036)

    The Hang and Roll Conversion Kit, models 1030,1032,1034 and 1036, is a kit that allows various sized floor bolsters to be converted into a suspended bolster. It provides a stable environment for gravitationally insecure clients and allows secure straddling, riding and cocontraction activities. Safety Snaps (see separate entry) are included. DIMENSIONS: Four sizes are available (diameter x length) 6 x 24 inches, 8 x 36 inches, 10 x 36 inches, and 12 x 36 inches. All kits measure 48 inches from the top of the Safety Snap to the bottom of the Bolster. CAPACITY: Working load 300 pounds. GUARANTEE: One full year from shipping date.

18. HOPPITY HOP BALL (MODEL 2100)

    The Hoppity-Hop Ball, model 2100, is a ball with a handle that is designed to provide proprioceptive feedback and challenge postural reaction and balance for children with a physical disability. The child sits on the ball with his/her legs wrapped around a handle used for holding on so it is great for follow the leader, obstacle courses and other games. It is made of durable, long lasting vinyl so that it can be used outdoors. It can be used by children ages three and up. DIMENSIONS: 16 to 20 inches. CAPACITY: Working load 65 pounds. GUARANTEE: One full year from shipping date.

19. INFLATABLE BALANCE BARREL (MODELS 1330 & 1331)

    The Inflatable Barrel Kit, model 1330 and 1331, is a kit to create a barrel roll using inner tubes designed to challenge motor skills and balance for individuals with a physical disability. Inner tubes with a large inner diameter are held together firmly with a special cover so that it becomes a large barrel. Clients can lay or sit inside or on top of the barrel. The kit comes with three inner tubes, a barrel cover and three valve stem covers to prevent scratches. OPTIONS: Tube Wraps to cover the valve stems of inner tubes are sold separately. One Tube Wrap, model 0185, is $19.00. Set of two, model 0186, is $29.00. SIZES: Large and Huge. DIMENSIONS: Outer diameter: large is 40 inches, huge is 45 inches. Inner Diameter is approximately 24 inches. CAPACITY: Working load is 250 pounds. GUARANTEE: One full year from shipping date.

20. INFLATOR DEFLATOR PUMP (MODEL 1350)

    The Inflator Deflator Pump, model 1350, is a hand held electric pump designed to inflate and deflate Playballs, Playrolls, Air Mats and other low pressure inflatables. It will not overinflate. POWER: plugs into any standard electrical outlet. GUARANTEE: One full year from shipping date.

21. INTERACTIVE LEARNING BLOCK AND DRESSING FRAME (MODELS 8100 & 8110)

    The Interactive Learning Block and Dressing Frame, models 8100 and 8110, are activity kits designed to develop fine motor skills, eye hand coordination and tactile discrimination for individuals with a physical disability. They combine many simple activities into one item and provide a number of textures and shaped such as laces, snaps, clasps, zippers, buckles, button closures, hooks and loops. The Interactive Learning Block has a different activity on each side so it can be used by more than one individual at a time - either on the floor or on the table. The Dressing Frame promotes bilateral activities on both sides and can be used on the floor, on the clients lap or on a desktop. DIMENSIONS: Learning block is 18 x 18 inches. The Dressing Frame is 20 inches in diameter. GUARANTEE: One full year from shipping date.

22. ITINERANT PLATFORM SWING (MODEL 7260)

    The Itinerant Platform Swing, model 7260, is a therapeutic platform swing designed for use by individuals with physical and neurological disabilities. The circular Itinerant Platform Swing is designed to fit the ITN Support Frame (see separate entry), and can be used in a variety of positions, including prone or sitting. The swing includes removable spreader bars to help provide additional room inside the ropes for larger clients. A carrying case is included. DIMENSIONS: 30 inches in diameter. CAPACITY: Up to 300 pounds. WEIGHT: 11 pounds.

23. JUMP AND PLAY ISLAND (MODEL 4500)

    The Jump and Play Island, model 4500, is a spatial orientation and balance training device designed for use by children with balance disabilities. This unit has a large inner tube at the bottom with eight vertical poles arranged so that children and climb around and between the poles while climbing over the inner tube. Playing in this unit increases spatial awareness, provides proprioceptive input, and increases balance and motor planning as children walk around the unit or manuever in and out of the middle. It also has a wooden base assembly and top, and 24 foam bumpers (doughnut-shaped foam pieces with enough for each pole to have three). OPTIONS: Tube cover (model 4510). COLOR: Black inner tube with four yellow and four blue jumping poles.

24. JUNIOR AND ADULT LOW PROFILE VERTICAL STIMULATION DEVICE (MODEL 6000 & 6002)

    The Low Profile Vertical Stimulation Device (VSD), models 6000 and 6002, is hardware for suspended equipment designed to provide vertical stimulation for individuals with physical disabilities. It provides vestibular and proprioceptive stimulation because it allows controlled bounce and vertical movement in a controlled area. It is similar to the standard VSD (see separate entry), but offers greater bounce capabilities because it comes with its own Rotational Device and can be used with low (eight to nine feet) ceilings. The stretchable loops that come with the device makes it adjustable for different weight ranges. The fixed strap has been added and must be used to prevent over stretching and damage. DIMENSIONS: Height is 15 inches. CAPACITY: Working load: Junior - 25 to 100 pounds, Adult - 50 to 200 pounds. GUARANTEE: One full year from shipping date.

25. JUNIOR AND ADULT VERTICAL STIMULATION DEVICE (MODELS 1930 & 1932)

    The Vertical Stimulation Device (VSD), models 1930 and 1932, is additional hardware for suspended eauipment designed to provide vestibular and proprioceptive stimulation for individuals with physical disabilities. It can be used with the Flexion Disc, T-Bar, or Therapy Net (see separate entries) to control bouncing and vertical movement. For versatility, there are four different straps that the equipment can be attached to with a Safety Snap (see separate entry). Two Safety Snaps are included. OPTIONS: Replacement Straps, models 1932 AND 1933, can be bought separately for a price of $49.00 per strap. DIMENSIONS: Height is 24 inches. CAPACITY: Junior model holds 25 to 100 pounds (25 pounds per strap). Adult model holds 50 to 200 pounds (50 pounds per strap). GUARANTEE: One full year from date of shipment.

26. KIDLITE BARREL (MODEL 1050)

    The Kidlite Barrel, model 1050, is a balance barrel designed to provide body rotation and develop balance and coordination for individuals with a physical disability. It can also be used to supinate clients. The barrel is lined with vinyl and foam and covered on the outside with soft carpet and padded foam edges around the rim. DIMENSIONS: 25 inches long x 21 inches in diameter. CAPACITY: Working load is 250 pounds. GUARANTEE: One full year from shipping date.

27. LAURI RING TOSS (MODEL PZ2602)

    Ring toss game includes 6 foam rubber rings, two of each diameter: 5 inches, 6 inches and 7 inches. Post with base included.

28. LI'L BELL SHELL & DEFENDER HELMET (MODEL 2230, 2231, 2232, 2233)

    An activity helmet, models 2230, 2231, 2232, and 2233, is a protective light weight helmet for children and adults who have equilibrium or coordination problems. It is made of lightweight, protective materials and can help reduce the risk of injury during play or therapy session. Adjustable chin strap and velcro backed pads allow adjustable sizing. SIZES: Child and Adult small, medium and large. GUARANTEE: One full year from purchase date.

29. MAT KIT (MODELS 9000 & 9001)

    The Mat Kit, models 9000 and 9001, is a therapy mat designed for balance training and motor planning skills for individuals with a physical disability. The mat kit allows you to create your own mat by combining the slip cover with a foam insert. The cover and insert are sold separately so you save money because you can replace one without the other. The 7 inch mat kit includes one cover, one 1 inch high density foam layer (comes in sections) and two 3 inch foam inserts. The 12 inch mat kit includes one cover and four 3 inch foam inserts. OPTIONS: Twelve inch mat cover, model 9002, is available for $239.00. Seven inch mat cover, model 9003, is available for $189.00. Three inch replacable foam, model 9004, is available for $59.00. One inch high-density foam, model 9005, is available for $69.00. DIMENSIONS: All mats are five x six feet. Height is one or three inches. GUARANTEE: One full year from shipping date.

30. MOON SHOES (MODEL 1113)

    Moon Shoes, model 1113, is a mini-trampoline designed to aid in the development of balance and coordination for individuals who are physically challenged. The shoes allow the user to jump and leap providing vestibular and proprioceptive stimulation. An enhanced strap system keeps the shoes securely fastened to the client's feet. Replacement bounce straps are available. SIZES: Maximum is men's shoe size 10. CAPACITY: Working load 150 pounds. COLOR: may vary. GUARANTEE: One full year from shipping date.

31. ORAL MOTOR SET (MODEL 2800)

    The Oral Motor Set, model 2800, is a respiratory training activity designed to provide tactile, proprioceptive, visual, and auditory feedback for children and adults with physical and neurological disabilities. The set includes a flute, a recorder, a harmonica, a plastic whistle, a metal whistle, a cleaning rod, and two kazoos. The flute and recorder facilitate a gradation of respiratory and oral motor control.

32. PATHWAY CHALLENGE (MODEL 3080)

    The Pathway Challenge, model 3080, is an maze game designed to provide bilateral activity that enhances fine motor skills for individuals with little or no motor skills in their upper extremities. It is an eye hand coordination activity that gives proprioceptive and auditory feedback. The side bars can move independently or together depending on the path drawn by the therapist. Simple paths can be drawn so that only one hand is required or more complex paths can be used to require the simultaneous action of both hands. The game comes complete with three interchangeable panels with different chuckhole patterns, two removable side bars, one metal ball, three plastic balls and a set of washable markers. All peices fit inside its own storage carrying case. GUARANTEE: One full year from shipping date.

33. PEG A SET AND PEG A PLANE (MODELS 2601 & 2603)

    The Peg-A-Set, model 2601, is a foam rubber toy kit designed to improve fine motor skills for children with little or no motor skills. Each set contains colorful crepe foam rubber shaped, wooden dowels, and full size lay on patterns which introduce basic diagram reading, shape recognition and matching. The set comes with three trucks and a train locomotive with three cars. Also available is the Peg-A-Plane, model 2603, which includes a humbo jet, a bi-plane, and a helicopter. GUARANTEE: One full year from shipping date.

34. PORTABLE ITINERANT SUPPORT FRAME (MODEL 7250)

    The Portable Itinerant Support Frame, model 7250, is a support frame designed for use in therapeutic settings by individuals with physical and neurological disabilities. The ITN Support Frame is made with lightweight material for ease in transport, thus assisting therapists to provide suspended equipment treatment in remote locations. It comes with a built-in safety rotational device and a zippered carrying case. The ITN Support Frame is compatible with the following Southpaw Swings: Therapy Net, Sling Swings, Cocoon Swings, Airwalker, Moon Swing, Trapeze Bars, The Twirler, Disc Swing, Flexion Disc, Dual Swing, Rubber Dual Swing, Infant Swing, Cuddle Swing, and Itinerant Platform Swing (see separate entries). Vinyl-covered cables attach the legs to one another for extra stability. DIMENSIONS: Traveling length is 72 inches. The base area is 84 x 84 inches. The unit requires 49 square feet of floor spaced and adjusts to three working heights: 7 feet, 3 inches; 7 feet, 10 inches; and 8 feet, 5 inches. CAPACITY: Up to 300 pounds static load. WEIGHT: 28 pounds.

35. ROLLER BOARD AND DELUXE ROLLER BOARD (MODEL 1300 & 1302)

    The Roller Board, models 1300 and 1302, is a balance board designed to challenge balance for persons with physical disabilities. A "special weighted cylinder" offers extra resistance for more challenge. It also comes with three sets of challenge panels which allow the therapist to grade the activity with easy quick adjustments. There are 16 different height varieties and options. The Kit includes a finicshed board, the weighted cylinder, three pairs of challenge boards, and one stationary kit. OPTIONS: The Roller board Carpet Kit, model 1307, can be used to add tactile experience to the roller board. It is easily attached and detached and costs $59.00. Balance Poles, model 1299, are available for $62.00. They can be used as an aid for balancing and are adjustable from 30 to 52 inches. DIMENSIONS: 15 x 30 inches. CAPACITY: 250 pounds. WEIGHT: 35 pounds. GUARANTEE: One full year from shipping date.

36. SAFETY ROTATIONAL DEVICE (MODEL 2000)

    The Safety Rotational Device, model 2000, is designed to provide rotation for suspended equipment. This product features a solid metal body with smooth acting roller bearings for free rotation. This will prevent you from damaging the equipment or the ceiling hookups. It clips easily to the ceiling bolt with a Safety Snap (see separate entry) which is included. DIMENSIONS: seven inches high. CAPACITY: Working load is 1,000 pounds. GUARANTEE: One full year from shipping date.

37. SINGLE & DOUBLE FLEXION EXTENSION PULLEY SYSTEM (MODELS 1901 & 1902)

    The Flexion Extension Pulley System, model 1901 and 1902, is a sensory integration device designed to strengthen trunk muscles for individuals with physical disabilities. The pulley allows a back and forth movement to provide stimulation anf can be used with other equipment to encourage dynamic movement patterns. The Pulley System comes with adjustable soft webbed loop handles in single or double style. The double pulley requires two ceiling points. GUARANTEE: One full year from shipping date.

38. SIT N SPIN (MODEL 1150)

    The Sit-N-Spin, model 1150, is a spinning board designed to provide child-directed rotational vestibular stimulation. The child rotates him\herself by using both hands to turn the center wheel. It is made of molded plastic and is recommended for children ages 1-1/2 to 5-1/2 years old. DIMENSIONS: Base is 17 inches in diameter. CAPACITY: Up to 60 pounds. GUARANTEE: One full year from date of purchase.

39. SOFT NET CLIMBER (MODEL 1260)

    The Soft Net Climber, model 1260, is a climbing rope ladder designed for working on motor planning skills for individuals with a physical disability. Extra padding in the webbing makes it softer on feet and easier to grab. It is sturdy, durable and washable and can be hung in any configuration such as vertical wall climber, a two sided tent or a fishing net. It can be used by clients of all ages and sizes. The net comes with two mat straps for securing it to most floor mats, and two "quick clips". Safety Snaps (see separate entry) are not included. DIMENSIONS: five by six feet. Special sizes available upon request. CAPACITY: Working load is 350 pounds. WEIGHT: Seven pounds. GUARANTEE: One full year from shipping date.

40. SOUTHPAW ADJUSTABLE SCOOTER BOARD AND TOW STRAP (MODEL 1950)

    The Adjustable Scooter Board, model 1950, is designed for working on extension patterns and bilateral motor coordination for children with a physical disability. Since the board is adjustable, it can be used by clients of all ages without encountering the problem of too much or too little support. The board is padded for extra comfort and increases in size just by simply inserting a leaf and locking into place. Included with the board is a Tow Strap which clips easily to the front of the scooter and has an easy-to-hold loop handle. DIMENSIONS: 14 x 18 inches. With insert 14 x 24 inches. Tow Strap is four feet long. CAPACITY: Working load is 150 pounds. GUARANTEE: One full year from shipping date.

41. SOUTHPAW ADULT ROTATOR (MODEL 1140)

    The Adult Rotator, model 1140, is a spinning board designed to provide self-directed rotational vestibular stimulation for individuals with a physical disability. It can be used by one or two clients and the center post can be adjusted for any size client. The center post can be removed to make it easier for positioning large or severe clients. The rotator comes with a carpet that can be removed for cleaning or for tactile defensive clients. DIMENSIONS: 36 X 22 inches. CAPACITY: Working load 300 pounds. WEIGHT: 50 pounds. GUARANTEE: One full year from shipping date.

42. SOUTHPAW BEAN BAG TOSS (MODEL 1821)

    The Bean Bag Toss, model 1821, is a game designed to work motor skills for individuals with a physical disability. It promotes proprioceptive skills, encourages range of motion, and improves eye-hand coordination. The client simply tosses the bean bags through the brightly colored hot air balloon holes displayed on the sky blue background. The easle which collapses for storage, has rounded corners and a rubber edge guard for safety. SIZES: Comes with large and small bean bags. DIMENSIONS: Board is 26 x 26 inches high. COLORS: Bean bags are green and blue according to size. GUARANTEE: One full year from shipping date.

43. SOUTHPAW BELLY BOOSTER (MODEL 1955)

    The Belly Booster, model 1955, is a bolster rolldesigned to work as an abdominal support for crawling activities for individuals with physical disabilities. Two adjustable side pieces act as stoppers so that the bolster will roll only as far as desired. When the sides stop the bolster from rolling forward, it automatically rolls backward. The Belly Booster can also support the users back or belly without rolling in order to build flexion patterns and trunk tone. It also acts as a T-stool where clients can sit on top and the therapist can control its stability by moving the stoppers. It can accomodate children and most adults. DIMENSIONS: It has a 15 inch working area. GUARANTEE: One full year from shipping date.

44. SOUTHPAW BILATERAL AIR GAME (MODEL 3095)

    The Bilateral Air Game, model 3095, is a game designed for strengthening bilateral, visual and fine motor planning skills for individuals with physical disabilities. The kit provides a multitude of games including hockey, volleyball or tennis. The repetitive action and resistance of the bellow aids in hand strengthening when the client manuevers the ball with a number of "air blasts". The game can be used by a variety of clients with different levels of abilities and is lightweight and portable. It comes with a washable playing surface, two special bellows and four selected targets. GUARANTEE: One full year from shipping date.

45. SOUTHPAW BIORBITAL ACCELERATOR (MODEL 1700)

    The Biorbital Accelerator, model 1700, is a rotational swing designed to provide vestibular stimulation through rotational, vertical and orbital motion for persons with physical disabilities. The steel crossbar serves as a teeter-totter which permits an exagerated movement. The main pivot of the crossbar can be moved by shifting the rotational device to one of three positioning eye bolts. This allows the versatility of having two different sized clients use the equipment. The Biorbital Accelerator includes two sets of leg loops, one sling seat, two adjustable chest harnesses and a Safety Rotational Device. DIMENSIONS: Height is 60 inches. CAPACITTY: Working load 300 pounds. GUARANTEE: Up to one full year from date of shipment.

46. SOUTHPAW BOARD WALK (MODEL 1198)

    The Board Walk, model 1198, is an obstacle course designed to build motor planning skills and balance for clients with a physical disability. Create a course adapted specifically to your individual's needs using the adjustable padded dividers. The plywood dividers are padded on each side so they easy on the knees and feet for walking and crawling. Build a straight ladder, connect the pieces at right angles or make a zig-zag path. It can also be used as a mini balance beam. DIMENSIONS: Six - four foot pieces and twenty - 11 inch rungs. CAPACITY: Weight limit is 300 pounds. GUARANTEE: One full year from shipping date.

47. SOUTHPAW BOUNCE PAD (MODEL 1120)

    The Bounce Pad, model 1120, is a trampoline designed to provide otolithic stimulation for persons with poor motor skills. The trampoline forces the user to practice balance, timing, and motor planning. The triangular Bounce Pad has a carpeted plywood base with a padded edge for protection. DIMENSIONS: 22 inch triangle. Five inches high. CAPACITY: Working load 100 pounds. WEIGHT: 15 pounds. GUARANTEE: One full year from shipping date.

48. SOUTHPAW CHILD AND ADULT COCOON SWINGS (MODELS 132 & 135)

    The Cocoon Swing, model 132 and 135, is a suspended hammock swing designed to provide full body support for individuals with a physical disability. The swing is made of soft nylon mesh fabric which does not pinch with the weight of the client and it hangs from five strong webbing straps. It can accomadate individuals up to six feet tall. Use the Safety Rotational Device (see separate entry) to provide orbital or axial stimulation. For additional support use the Floor Bubble and Therapy Net Adaption Kit (see sparate entries). CAPACITY: Working load: child - 150 pounds, adult - 300 pounds. GUARANTEE: One full year from shipping date.

49. SOUTHPAW CHILD AND ADULT SLING SWINGS (MODELS 133 & 134)

    The sling swing, models 133 and 124, is a suspended hammock swing designed to provide full and even support of the torso for individuals with physical disabilities. The swing is made of soft nylon knit fabric which is better tolerated by tactilely defensive clients and will not gather or bunch with the weight of the client. Supported with heavy duty vinyl for strength and durability, the swing offers responsive support, provides all support in a flexion position and offers vestibular stimualtion prone or seated. DIMENSIONS: Height is 60 inches. CAPACITY: Working load for child 150 pounds. For adult 350 pounds. GUARNANTEE: One full year from shipping date.

50. SOUTHPAW CUSTOM SUPPORT STRUCTURE (MODEL 7000)

    The Custom Support Structure, model 7000, is an overhead support frame designed to support suspended equipment when you are not able to install suitable ceiling supports. This is a solid, stable free-standing support structure with three forged eyebolts evenly spaced on the top of beam for use with almost any suspended equipment. The slip fit bolt system is easy to put together and disassemble which makes it convenient for therapists who move frequently. The frame is made of heavy gauge box steel and the bases and uprights are heavily padded. DIMENSIONS: Height varies from seven feet-six inches to twelve feet. Main beam length from eight feet to 20 feet. The base remains a standard eight feet. CAPACITY: Working load is 1,500 pounds. WEIGHT: 700 pounds assembled. GUARANTEE: One full year from shipping date.

51. SOUTHPAW DOUBLE TRAPEZE BAR (MODEL 4003)

    The Double Trapeze Bar, model 4003, is a trapeze designed to provide a variety of developmental skill-building tasks for children with a physical disability. As a trapeze it It aids in reciprocal pumping and timing, strengthens flexion development when used for pulling to sitting and challenges motor skills of clients attempting advanced motions. As a trapeze with a double bar it provides confidence as children pull themselves up to a sitting position. DIMENSIONS: Rungs are 30 inches long and 18 inches apart. Diameter is 1-1/4 inches. Height is 27 inches. CAPACITY: Working load 200 pounds. GUARANTEE: One full year from shipping date.

52. SOUTHPAW EZ-UP SYSTEM (MODEL 0190)

    The EZ-Up System, model 0190, is an overhead support frame designed for home use for hanging suspended equipment. The system allows center stabilization for suspending many pieces of equipment. The unit is easily installed for therapy and removed for storage. It comes completely assembled with a strapping system for door frames. OPTIONS: A set of two Replacement Brackets are available for $25.00. DIMENSIONS: Up to 32" wide. GUARANTEE: One full year from date of shipment.

53. SOUTHPAW FISHING GAME (MODEL 1826)

    The Fishing Game, model 1826, is designed to promote eye hand coordination and perception training for individuals with a physical disability. Made with washable hook and loop fabric, it only takes a touch of the fishing hook to catch one of the fish. The pole has an adjustable slide weight to provide full range proprioceptive feedback and is sized to fit clients' hands of all sizes. The kit comes with one fishing pole, two starfish, two seahorses, two fish, one weighted fish, extra fish fabric for making your iwn fish and extra "fishing line". DIMENSIONS: The pole is 12 inches long. GUARANTEE: One full year from shipping date.

54. SOUTHPAW FLEXION DISC (MODELS 1909,1910 & 1911)

    The Flexion Disc, model 1909, is a sensory integration device designed to provide both vestibular and proprioceptive stimulation for individuals with physical disabilities. The individual may sit or lay curled around the disc and the control strap attached to the top or the bottom of the disc can be used to vary the motion of the disc. The disc has a carpeted base with a heavily padded edge and center post. It can be used with the adjustable Vertical Stimulation Device (VSD) (see separate entry). Also available are the Deluxe Light Duty Flexion Disc, model 1910, for juniors and the Deluxe Heavy Duty Flexion Disc, model 1911, for adults. Both include the VSD. DIMENSIONS: Height without VSD is 35 inches Diameter of disc is 24 inches. Diameter of center post is nine inches. CAPACITY: Working load 300 pounds. WEIGHT: 19 pounds without VSD. GUARANTEE: Up to one full year from date of shipment.

55. SOUTHPAW FLEXION T-BAR (MODELS 1919, 1920 & 1921)

    The Flexion T-Bar, model 1919, is a sensory integration device designed to challenge flexion patterns for persons with physical disabilities. Individuals can hold on with arms and legs while being pushed or two people can ride at the same time. The T-bar also allows clients to hang beneath and shift from side to side while it is swinging. The T-Bar is heavily padded to cushion the seat and has a control strap to control the movement. The swing can be used with the adjustable Vertical Stimulation Device (VSD) (see separate entry). Also available are the Deluxe Light Duty T-Bar Swing, model 1920, for juniors and the Deluxe Heavy Duty T-bar swing, model 1921, for adults. Both include the VSD. DIMENSIONS: Height without VSD is 44 inches. Height with VSD is 68 inches. Seat is 12 inches on each side and center post is 29 inches high. CAPACITY: Working load 350 pounds. WEIGHT: 19 pounds without VSD. GUARANTEE: Up to one full year from date of shipment.

56. SOUTHPAW FLYING TRAPEZE (MODEL 1960)

    The Flying Trapeze, model 1960, is a horizontal glider designed to enhance motor skills for induals with a physical disability. It is useful in developing tolerance to movement, improving flexion patterns and motor planning a new task. The system hangs from two existing ceiling points eight to twelve feet apart and does not require wall mounted suspension points. The Flying Trapeze is completely adjustable to fit the needs of the user. Alter the angle of the track to change the speed. Choose the trapeze bar for hanging or the sling seat for hanging. Both are included with the product. The configuration of the upper rigging uses four height adjustments for complete control over the height. DIMENSIONS: Length is ten feet. Height is adjustable from eight to twelve feet. Trapeze bar is 14 inches long. CAPACITY: Working load: 200 pounds. GUARANTEE: One full year from purchase date.

57. SOUTHPAW FROG SWING (MODEL 1925)

    The frog swing, model 1925, is a swing designed to provide proprioceptive stimulation and vertical movement for individuals who are gravitationally insecure and low tone. The user is supported across the stomach with a sling while the arms and legs are free to control the bouncing. The individual is in direct control of how much stimulation he receives as well as the security or insecurity of there position. The Safety Strap must be used with the Frog Swing to prevent overstretching the stimulation loops and ensure the safety of the user. The swing comes with three vertical stimulation loops, two locking safety snaps and one safety strap. Additional replacement loops may be purchased at a price of $29.00 per loop. DIMENSIONS: Height is 60 inches. CAPACITY: Working load is 35 to 100 pounds. With additional loops up to 160 pounds. Each strap adds 20 to 30 pounds to the working load. GUARANTEE: One full year from purchase date.

58. SOUTHPAW HEIGHT ADJUSTOR (MODEL 5000)

    The Height Adjustor, model 5000, is designed to slide up and down the master rope of suspended equipment in order to adjust the height of the equipment. It features a safety locking pin system which is completely safe to hold lightweight equipment and clients. CAPACITY: Working load 500 pounds. GUARANTEE: One full year from date of shipment.

59. SOUTHPAW INTERACTION DUAL SWING (MODEL 1630)

    The Interaction Dual Swing, model 1630, is a rotational swing designed to encourage interaction and provide stimulation for individuals with a physical disability. It allows clients to practice playing with each other. The swing provides both rotational and orbital stimulation and demands postural adjustment. The Package includes two lines and spreader bar, four leg loops and one Safety Snap. OPTIONS: Also available is the Southpaw Sling Seat, model 1625, which is a six inch sling seat designed to provide comfort for larger clients. It can be used with the swing or alone. DIMENSIONS: Height 61 inches. CAPCITY: Working load 400 pounds.

60. SOUTHPAW LADDER WALL (MODEL 1250)

    The Ladder Wall is a climbing rope ladder designed to provide range of climbing tasks and motor planning activities for individuals with little motor control. The staggered rung design allows users to climb straight up and down, sideways or diagonally. The height can be adjusted to suit the individual. The ladder requires a two point Suspension System and comes with two mat straps, two Safety Snaps, and two "quick clips". CAPACITY: Maximum 250 pounds. DIMENSIONS: 7.5 feet high x 4 feet wide. The rungs are 1-1/4 inches diameter. Top and bottom rungs are 1-7/8 inches in diameter. WEIGHT: 22 pounds. GUARANTEE: One full year from shipping date.

61. SOUTHPAW MONSTER BLOCKS, SOUTHPAW SUPER BLOCK & SOUTHPAW SUPER BLOCK SET (MODELS 1970, 1975 & 1976)

    Monster Blocks, model 1970, are large, soft foam blocks covered with reinforced vinyl used for basic constructional tasks and scooter board obstacle courses. Also available is the Super Block and the Super Block Set. DIMENSIONS: Monster blocks are 9 x 12 x 18 inches. Super Blocks are 9 x 12 x 36 inches. WEIGHT: Monster blocks weigh 1.5 pounds. GUARANTEE: One full year from shipping date.

62. SOUTHPAW MOON SWING (MODEL 0140)

    The Moon Swing, model 0140, is a rotational swing designed with a gooseneck shape to create an easy mount and dismount for indivuals who are physically challenged. There are two pillow inserts which add to the versatility of the swing. The soft, fine, bi-foam pillow insert requires more difficult flexion patterns because the consistency constantly changes. The stiff soft shape pillow insert allows the clients to stand, kneel or do more complicated riding activities. The Moon Swing can also be used as a stationary item on the floor. It is safe, sturdy, easy to hang on and works with low ceilings. DIMENSIONS: 48 inches high by 18 inces in diameter. CAPACITY: Working load 200 pounds. GUARANTEE: One full ear from shipping date.

63. SOUTHPAW NET MAT (MODEL 0136)

    The Net Mat, model 0136, is a therapy mat designed to be used in the Therapy Net (see separate entry) to keep the net open for individuals with a physical disability. The mat includes special fasteners which secure the mat and makes it easier to place the individual in the net. This product helps put the client at easebecause it prevents pinching and frees the arms and chest area. The mat has firm and comfortable foam center with a removeble, washable cover. DIMENSIONS: 26 inches wide x 52 inches long x 2 inches thick. GUARANTEE: One full year from the shipping date.

64. SOUTHPAW PLATFORM SWING AND SOUTHPAW EXPANDED PLATFORM SWING KIT (MODELS 1800 & 1810)

    The Platform Swing, model 1800, is designed to challenge balance and postural adjustment for individuals with physical disabilities. The top disc design gives the therapist the advantage of being able to grade the ammount of movement the client receives. The swing comes with a removable carpet and the edges are padded with a replaceable bumper. The Expanded Platfrom Swing Kit comes with the platform swing and an Infant Adaption Kit. The Infant Adaption Kit provides a padded "pool" for infants and small clients with extreme gravitational insecurity. OPTIONS: The Infant Adaption Kit, model 1820, can be ordered separately for a price of $159.00. A replacement bumper, model 1802, is also available for $15.00. Pull handles and rope, model 1855, are available for $14.95. DIMENSIONS (HxLxW): 60 x 31 x 31 inches. CAPACITY: Working load 300 pounds. WEIGHT: 18 pounds. GUARANTEE: One full year from shipping date.

65. SOUTHPAW PONY BOLSTER SWING AND DELUXE PONY BOLSTER SWING (MODELS 1005 & 1015)

    The Pony Bolster Swing, model 1005, is a smaller bolster swing designed to be used for challenging postural adjustments and balance reactions for individuals with a physical disability. It is similar to the Standard Bolster Swing (see separate entry) but is smaller and therefore is good for smaller spaces and smaller children. It is easier to hang and transport and the top control lines and crossbar make it easy to adjust. The swing comes with a built in Safety Rotational Device and five Southpaw Safety Snaps. The Deluxe Pony Bolster Swing, model 1015, comes with a removable carpet. OPTIONS: A Carpet Kit, model 1004, is also available for $59.00. DIMENSIONS: 36 inch length. 69 inch height. 9 inch diameter. CAPACITY: Working load 350 pounds. WEIGHT: 19 pounds. COLOR: Available in red, green, blue, yellow and professional brown. GUARANTEE: One full year from shipping date.

66. SOUTHPAW S.I. TABLE (MODEL 5700)

    The S.I. Table, model 5700, is a sensory integration evaluation system designed to fit the needs of the latest S.I.P.T. diagnostic test. The table provides a comfrotable workplace for client and therapist that is instatntly ready for administering the test. The table is sizeed so that the approprite testing parameters are met. The removable deep dished trays for storing test pieces are accessible from both sides of the table. A bracket holds the enclosed vision shield at the right height and angle and can be moved toward of away from the client as desired. The top of the table folds for easy storage. OPTION: Also available for $239.00 is a Swivel Chair, model 5715, which has adjustable height, seat and back. DIMENSIONS: Open: 60 inches long x 25 inches high x 26 inches wide. Closed: 21 inches long x 45 inches high x 26 inches wide. GUARANTEE: One full year from shipping date.

67. SOUTHPAW SAFETY SNAP (MODEL 100)

    The Safety Snap, model 100, is designed to connect two pieces of hanging equipment. It is made with a self closing gate which prevents the snap from opening by accident or under pressure of a heavy load. DIMENSIONS: Height is four inches. CAPACITY: Working load is 1000 pounds. GUARANTEE: One full year from date of shipment.

68. SOUTHPAW SINGLE RUNG CLIMBING LADDER (MODEL 1255)

    The Single Rung Climbing Ladder, model 1255, is a rope ladder designed for practicing climbing, motor planning, strengthening and gravitational security activities for individuals with a physical disability. The ladder is made of poly side ropes which support the hardwood rungs. It comes with two Safety Snaps, two mat straps and two "quick clips". DIMENSIONS: Seven feet high by 18 inches wide. Special heights are available upon request. Diameter of rungs is 1-1/4 inches. CAPACITY: Working load is 250 pounds. WEIGHT: Five pounds. GUARANTEE: One full year from shipping date.

69. SOUTHPAW SOFT STEPS (MODEL 1429)

    Soft Steps, model 1429, are therapy mats designed to allow therapists to vary the height perception for individuals who have a physical disability. Each mat is a different size and when combined creates a number of steps as desired. Each mat is easily attached to other mats with a hook and loop fastener so a variety of combinations are possible. The Soft steps can be used to develop balance and reciprocating skills for gravitationally insecure clients. The mats are made of durable bi-foam and are double laminated for extra protection. DIMENSIONS: Includes one of each of the following sizes: 29 x 29 x 6 inches, 29 x 36-1/4 x 6 inches, 29 x 43-1/2 x 6 inches, 29 x 50-3/4 x 6 inches and 29 x 58 x 6 inches. CAPACITY: Working load is 400 pounds. GUARANTEE: One full year from shipping date.

70. SOUTHPAW SPECIAL RIDER (MODEL 1982)

    The Special Rider, model 1982, is a riding toy designed to provide support for positioning and smoother riding mobility for children with lower extremity and poor trunk control. The child controls the Special Rider by swinging the handle bars from side to side. It allows the physically limited child to become self propelled and engage in fun upper extremity and trunk exercise. By providing normal play activity, it helps to promote visual perceptual skills, enhance motor planning, and provide vestibular stimulation. The Special Rider is eauipped with an adjustable lumbar support strap for stability and positioning; upturned handlebars to encourage trunk extension and shoulder stability; adjustable bumpers on padded handlebars to protect fingers; adjustable foot plate with heel cutouts; hook and loop straps for easy positioning on the foot plate or for securing the ankles, shins, knees or thighs; padded non-slip seat; padded back support to aid trunk stability; and adjustable seat belt for positioning and stability. The rider is durable and its wheels will not mark the floor. CAPACITY: Working load is 130 pounds. GUARANTEE: One full year from shipping date.

71. SOUTHPAW STANDARD & MINI GLIDER BOLSTERS (MODEL 1006 & 1007)

    The Glider Bolster, models 1006 and 1007, is a versatile bolster swing with a platform for individuals with a physical disability. Because it has a larger platform, it can accomodate larger clients in all developmental positions. It can be used by the one or more clients or the client and therapist together. The bolster can be hung from two or four points and can be moved in smooth arcs or gently rocked. Each bolster is dual colored to identify the soft versus hard padding. The therapist can switch from high-density foam to low-density foam by flipping the bolster over which helps with the client's comfort and visual stimulation. Each Bolster comes with a heave vinyl cover, high/low density padding and two Safety Snaps (see separate entry). DIMENSIONS: (Length x Width x Height) Standard is 6 x 1-1/2 feet. Mini is 4 x 1 feet. Both are 8-1/2 inches deep. Side ropes for both are 45 inches long. Other rope lengths can be special ordered. CAPACITY: Working load is 400 pounds for both. WEIGHT: Standard is 44 pounds. Mini is 28 pounds. COLOR: Standard comes in blue/green. Mini comes in red/blue. Both are also available in professional brown. GUARANTEE: One full year from shipping date.

72. SOUTHPAW STANDARD AND DELUXE BOLSTER SWING (MODEL 1001 & 1000)

    The Standard and Deluxe Bolster Swings, models 1001 & 1000, are therapuetic suspended pieces of equipment designed to challenge postural adjustments and balance reactions for individuals who have physical disabilities. The client can be positioned on top of the bolster or hang underneath to provide a variety of progressive flexion activities. Each of the bolster swings comes complete with a built in Safety Rotational Device and five safety snaps. They are heavily padded and vinyl covered with an aluminum core. The Deluxe Bolster swing comes with a detachable carpet that provides tactile stimulation. It also increases the circumference to accomodate for larger children and adults. DIMENSIONS: Both swings are 48 inches long by 9 inches in diameter and 69 inches high. Standard circumference is 26 inches. Deluxe circumference is 29 inches. CAPACITY: 350 pounds. WEIGHT: Standard is 22 pounds. Deluxe is 25 pounds. COLOR: Available in professional brown, red, blue, green, or yellow. GUARANTEE: One full year from date of shipment.

73. SOUTHPAW STANDARD DUAL SWING AND SUPER BOOSTER SWING (MODELS 1600 & 1605)

    The Standard Dual Swing, model 1600, is designed to provide orbital and rotational movements for individuals who have a physical disability. It can be used in the prone position to work on extension, or sitting to provide vestibular stimulation or work on motor planning skills. When sitting, the swing can be used by one or two people. The swing comes with four leg loops made of soft webbing attached to four poly lines. It fastens at the top with two Safety Snaps (see separate entry) which are included. The Super Booster Swing, model 1605, can be used for larger clients. DIMENSIONS: Overall height is 67 inches. Each poly line is 40 inches long. CAPACITY: Working load is 400 pounds. GUARANTEE: One full year from shipping date.

74. SOUTHPAW STANDARD TRAPEZE BAR (MODELS 4000 & 4001)

    The Trapeze Bar, models 4000 and 4001, is designed to provide a variety of developmental skill-building tasks for individuals with physical disabilities. Can be used to grip, pull, sit or swing in order to develop reciprocal pumping and timing, or strengthen flexion development. The bar is made of solid hardwood and comes with two Safety Snaps (see separate entry). SIZES: Small, large. DIMENSIONS: Small is 25 inches long and 30 inches high. Large is 34 inches long and 39 inches high. Both are 1-1/4 inches in diameter. CAPACITY: Working load 200 pounds. GUARATEE: One year from date of shipment.

75. SOUTHPAW TACTILE ACTIVITY KIT (MODEL 2850)

    The Tactile Activity Kit, model 2850, is a tactile discrimination training kit designed for non-visual tactile activities for individuals with sensory depravation. Hand openings on either side of the activity box allow the therapist to inssert tactile objects without the client seeing. Foam shields around the hand openings prevent the client fro peeking. The set comes with 25 pair of different wooden shapes, playing cards with a colored picture on one side and a line drawing on the other and a card holder. GUARANTEE: One full year from shipping date.

76. SOUTHPAW TEXTURED DOMINOES (MODEL 1571)

    Textured Dominoes, model 1575, are designed to provide tactile stimulation for individuals who are visually disabled or sensory deprived. The dominoes are black and have "touch and feel" spots representing several textures such as courduroy, burlap and sandpaper. On the other side of the dominoes are large coored dots so that individuals with vision can enjoy them also. A set of 28 dominoes comes with a drawstring bag for storage. DIMENSIONS: Dominoes are two by four inches. GUARANTEE: One full year from shipping date.

77. SOUTHPAW THERAPY ROCKETS (MODEL 3089)

    Therapy Rockets, model 3089, are rockets designed for working on trunk rotation and joint compression for individuals with a physical disability. As the client aims the rocket they develop targeting, visualization, and body scheme. It is made of foam that has enough weight to give perceptual feedback, but is light enough for small clients to hold. The rockets come in a set of four with a special holder and are easy to store and transport. DIMENSIONS: 40 inches long. GUARANTEE: One full year from shipping date.

78. SOUTHPAW TIC TAC TOE (MODEL 1825)

    Tic-Tac-Toe, model 1825, is a bean bag game designed build proprioceptive skill, encourage range of motion and improve eye-hand coordination for individuals with a physical disability. The game is made of durable, easy to clean, heavy vinyl and comes with ten weighted bean bags. DIMENSIONS: Vinyl board is 24 x 24 inches. GUARANTEE: One full year from shipping date.

79. SOUTHPAW TIRE SWING KIT (MODEL 1550)

    The Tire Swing Kit, model 1550, is designed for individuals who are gravitationally insecure and prefer stable non-threatening equipment. It provides a variety of applications for use with clients standing, kneeling, sitting or lying down. The tire swing kit includes ropes, hardware and instructions. DIMENSIONS: 70 inches high. CAPACITY: Working load is 250 pounds. GUARANTEE: One full year from date of shipment.

80. SOUTHPAW TOWER LADDER (MODEL 1200)

    The Tower Ladder, model 1200, is a climbing rope ladder designed to provide versatile motor planning skills for small children with physical disabilities. It offers opportunities for creative play by allowing the user to climb up or down from both the inside and outside. It is made of soft poly ropes which support the solid hardwood rungs. The ladder comes equipped with one Safety Snap, two mat straps and four "quick clips". DIMENSIONS: 7-1/2 feet high x 17 inches wide. Rungs are 1-1/4 inches in diameter. CAPACITY: working load is 250 pounds. WEIGHT: 19 pounds. GUARANTEE: One full year from shipping date.

81. SOUTHPAW T-TUNNEL (MODEL 3960)

    The T-Tunnel, model 3960, is a crawling tube designed to develop motor planning and spatial orientation for individuals with a physical disability. While crawling through the tunnel the client develops body schema and awareness of the body in respect to space as well as left and right discrimination. The tunnel is made of breathable fabric which is "see through" and the support wires are covered with flexible tubing to prevent scraping and bruising as the clients crawl. Spreader bars help to keep the shape of the tunnel. More than one tunnel can be easily attached with the two fastening straps to create different shaped mazes. DIMENSIONS: Diameter is 24 inches. Length is eight feet. GUARANTEE: One full year from shipping date.

82. SOUTHPAW TWIRLER (MODEL 1149)

    The Twirler, model 1149, is a rotational swing designed to provide axial and vestibular stimulation for individuals with a physical disability. It can also be used to stimulate flexion and extension patterns. The Twirler comes with a built in Safety Rotational Device which allows it to spin freely and can be used with the Vertical Stimulation Device (see separate entry) to add bounce. DIMENSIONS: Height is 36 inches. CAPACITY: Working load is 300 pounds. GUARANTEE: One full year from shippping date.

83. SOUTHPAW WALRUS AIR MAT AND SEAL AIR MAT (MODELS 1325 & 1326)

    The Air Mat, models 1325 and 1326, is an air flotation mattress designed to provide vestibular or proprioceptive stimulation for individuals with a physical disability. It is also good for working with postural adjustments, sensory stimulation, motor planning tasks and balance activities. DIMENSIONS: Uninflated: Walrus is six by seven feet and Seal is four by seven feet. CAPACITY: Working load is 150 pounds. COLORS: Vary. GUARANTEE: One full year from shipping date.

84. SOUTHPAW WEE TRAPEZE BAR (MODEL 4004)

    The Wee Trapeze Bar, model 4004, is a trapeze designed to provide a variety of developmental skill-building tasks for smaller children who have a physical disability. It can be used as an overhead handle for jumping and bancing activities. Because the length of the bar is shorter than standard, it is long enough to hold on to but not cumbersome for young children. It suspends from a ceiling hook and has a "non-turning" bar. DIMENSIONS: 14 inches long, 1 inch diameter, 23 inches high. CAPACITY: Working load is 100 pounds. GURANTEE: One full year from shipping date.

85. STANDARD AND SUPER FLOOR BUBBLES (MODELS 1939 & 1942)

    The Floor Bubble, models 1939 and 1942, is a balance board designed to encourage postural adjustments and weight shift patterns for children with physical disabilities. The rocking and rotating motions are beneficial for posturally or gravitationally insecure children who are afraid to be off the floor. The bubble can ne combined with other pieces of equipment to vary postural reactions and encourage imaginative play. DIMENSIONS: Standard is six inches deep and 24 inches in diameter. Super is ten inches deep and 24 inches in diameter. CAPACITY: Working load is 150 pounds. WEIGHT: Standard is three pounds. Super is five pounds. COLOR: Available in clear, blue or red. GUARANTEE: One full year from date of purchase.

86. STANDARD LINEAR GLIDER AND ADULT LINEAR GLIDER (MODELS 1850 & 1852)

    The Linear Glider, models 1852 & 1850, is a suspension platform swing designed to develop postural reactions and weight-shift patterns for individuals who have little mobility control or strength. The glider is large enough to accomodate clients from preschoolers to adults and may be used in a variety of full developmental positions. The client has the ability to shift weight and engage in reciprocal motion as he/she starts from a stationary position. The device can be hung from one or two ceiling points. The glider's platform is covered with a removable carpet and the edges are covered in upholstery-grade vinyl for extra protection. It also comes with a set of pull handles. OPTIONS: Extra pull handles, model 1855, are available at a cost of $14.95. The Glider Adaption Kit, model 1856, is recomended for individuals who are physically challenged. It includes leg straps, fastening grips and a wedge, all of which allow the client to be positioned in a prone or sitting position. It costs $69.00. DIMENSIONS: The adult Linear Glider is 30 x 60 inches and 70 inches high. The standard is 24 x 36 inches and 60 inches high. CAPACITY: Adult holds maximum 300 pounds. Standard holds maximum 250 pounds. GUARANTEE: Southpaw products are guaranteed against defects in materials and workmanship for one full year from shipping date.

87. TACTILE BALANCE BEAMS

    The Tactile Balance Beam is a balance training device designed for use with children with balance, neurological, or mobility disabilities and tactile deficits. These highly tactile pieces snap together to create a variety of paths from a circle to straight or meandering pathways. The top surfaces are covered with hundreds of smooth, rounded bumps for comfortable stimulation. The Tactile Balance Beams are available in straight or curved sets of eight pieces and can be used in conjunction with each other to make more challenging paths. DIMENSIONS (HxLxW): 2 1/8 x 19.25 x 5.25 inches.

88. TACT-O-SAURUS JANE (MODEL 3340)

    The Tact-O-Saurus Jane, model 3340, is a tactile therapy toy designed to enhance tactile sensation for individuals with sensory depravation. It encourages the a full range use of imagination while building motor skills. Five sections of interchangeable bosy parts can be pulled apart and put back together. Each section is filled/covered with a different tactile media ranging from hard and light to soft and heavy. The fabrics range from smooth to coarse. DIMENSIONS: Five feet total length, each piece approximately three inches in diameter. GUARANTEE: One full year from shipping date.

89. TEST OF ATTENTION FOR INFANTS KIT (MODEL 3106)

    The Test of Attention for Infants Kit, model 3106, is a test designed to target infants who may be at risk for later cognitive delays, attentional deficits and learning disabilities. The test consists of four subdomains which are Visual Attention, Tactile Attention, Auditory Attention and Multi-Sensory Attention. It evaluates the infants ability to initiate and sustain attention, persist and maintain interest, shift attention between stimuli and focus attention when challenged. The kit includes a testing manual, the eight activities used to measure behavior, the testing score sheets and a carrying case. OPTIONS: Additional Score sheets, model 3106-A, at $15.00 per pad. There are 25 sheets per pad. GUARANTEE: One full year from shipping date.

90. THERAPY BALLS (MODELS 1311-1315 & 1361-1366)

    Therapy Balls, models 1311-1315 and 1361-1366, are designed for therapeutic exercise for individuals with a physical disability. They can be used with clients in almost any developmental position for an endless variety of activities for flexion, extension, equilibrium reactions, and postural adjustments. The balls are made of soft heavy-duty molded vinyl and can be soft inflated using the Inflator/Deflator Pump (see separate entry) or firmly inflated to full diameter using the Air Station (see separate entry). DIMENSIONS: 16-, 20-, 24-, 34-, 37- and 49- inch diameter. Superior and Standard Therapy Balls come in 17-, 22- and 25- inch diameters. Diameters are at maximum inflation. COLORS: Yellow, orange, green, blue and red depending on diameter. GUARANTEE: One full year from shipping date.

91. THERAPY NET AND ADAPTION KIT (MODEL 0130 & 0131)

    The Therapy Net, model 0130, is a rotational swing designed to provide linear movement and vestibular stimulation for persons with little motor control. The Net is roomy so it is large enough for children and adults and it stretches easily so as to prevent pinching fingers. The net is made of heavy-duty nylon cord, and is suspended from welded steel rings. Also available is the Adaption Kit, model 0131, which allows physically challenged or uncoordinated individuals the opportunity to enjoy the net as well. It includes a padded wooden seat and top spreader bar. This lets the therapist position the client in the net. DIMENSIONS: Height is 48 inches. CAPACITY: Working load is 200 pounds. GUARANTEE: Up to one full year from shipping date.

92. THERAPY ROPE AND EYE SPLICE (MODELS 150 & 151)

    Therapy rope, model 150, is designed to be extremely strong for hanging therapeutic devices. The Eye Splice, model 151, is a special steel-lined loop mechanically attached to the end of the rope. CAPACITY: 6000 pounds. GUARANTEE: One full year from date of purchase.

93. TILT N TWIRL (MODEL TWL1100)

    Carpeted tile board for balancing and proprioception activities. Plywood base with roller bearings. Braking system gives therapist control, large knobs lock board in place. Can be used at two levels: close to floor and about 1 foot from floor. 24 inches in diameter, padded edges, 3 handle straps.

94. TUBE SWING KIT (MODEL 1501)

    The Tube Swing Kit, model 1501, is designed to provide proprioceptive and vestibular stimulation for individuals with physical disabilities. It is good for flexion and co-contraction exercises and the rubber's natural bounce provides added stimulation. The Kit includes the harness and a large, heavy duty truck innertube. The webbed nylon sling has a fastening closure and is made with a double thickness of material to protect clients from being scraped or poked by the valve stem. OPTIONS: The Harness can be bought without the tub at a price of 49.00. The Tube is sold separately for $40.00. CAPACITY: Working load is 250 pounds. GUARANTEE: One full year from date of shipment.

95. VARIABLE AXIS SWING (MODEL 4600)

    The Variable Axis Swing, model 4600, is a suspended rotational swing designed to provide spatial awareness and proprioceptive stimulation through movement for clients who are individuals who are physically challenged. The swing allows movement in all directions included swinging and spinning with the use of the Rotational Device (see separate entry). The seat is comfortably cushioned for positioning from nearly vertical to horizontal. The Swing comes complete with a strapping system that offers security for gravitationally insecure and low tone clients and is adjustable in two directions for clients of any size. The design leaves the users arms and legs free for throwing and kicking balls and allows the therapist easy access to the user from any position. The Swing has a durable, washable covering, is lightweight and folds for easy storage. DIMENSIONS: Swing frame is 44 inches wide x 54 inches high. Seat is 41-1/4 x 22-3/4 inches. CAPACITY: Working load 300 pounds. WEIGHT: Six pounds. GUARANTEE: One full year from shipping date.

96. VERTICAL BOLSTERS (MODELS 1480,1481,1482,1483)

    Vertical Bolsters, models 1480, 1481, 1482 and 1483, designed for building flexion strength and challanging gravitationally insecure clients. The durable easy-grip vinyl is great for clinging, climbing and swinging. DIMENSIONS: Available in 9 or 12 inch diameter and 60 or 80 inch length. CAPACITY: Working Load 250 pounds. GUARANTEE: One full year from shipping date.

97. WEIGHTED BELT (MODELS 2267, 2268, 2269 & 2270)

    The Weighted Belt develops proprioceptive skills and provides proprioceptive feedback for individuals with physical or neurological disabilities. The belt features hook and loop closure and is constructed to allow weight placement to meet the wearer's specific needs. SIZES: Small (no. 2267, $43) holds 0 to 9 pounds in weights; medium (no. 2268, $43) holds 0 to 9 pounds in weights; large (no. 2269, $53) holds 0 to 12 pounds in weights; and extra-large (no. 2270, $53) holds 0 to 12 pounds in weights. DIMENSIONS: Small adjusts from 24 to 28 inches; medium adjusts from 28 to 32 inches; large adjusts from 32 to 36 inches; and extra-large adjusts from 36 to 40 inches. COLOR: Varies.

98. WEIGHTED VESTS (MODELS 2257, 2258, 2259, 2263, 2259-A, 2263-A & 2264-A)

    Weighted Vests are designed to provide proprioceptive feedback and stability for individuals with physical and neurological disabilities. These vests are adjustable to permit use with more than one person, and they are cut to maximize ventilation for the wearer. They feature tear-away zippers for easy opening and reinforced weight pockets. The child's extra-large and the adult medium/large and extra large also feature adjustable hems for maximum comfort and cargo-style pockets. The weights for all models can be adjusted to meet individual needs, and they are double-bagged and vinyl sealed for durability and easy cleaning. OPTIONS: Additional sets of four .5-pound, .75-pound, 1-pound, or 1.5-pound weights ($29 per set). SIZES: Children's small (no. 2257, $89) holds 0 to 9 punds in weights; medium (no. 2257, $129) holds 0 to 12 pounds in weights; large (no. 2259, $129) holds 0 to 12 pounds in weights; extra-large (no. 2263, $145) holds 0 to 18 pounds in weights. Adult small (no. 2259-A, $129) holds 0 to 12 pounds in weights; medium/large (no. 2263-A, $145) holds 0 to 18 pounds in weights; extra-large (no. 2264-A, $149) holds 0 to 18 pounds in weights. DIMENSIONS: The child's small is 16 inches long from shoulder to hem and fits chests 26 to 29 inches. The child's medium is 17 inches long from shoulder to hem and fits chests 29 to 32 inches. The child's large is 18 inches long from shoulder to hem and fits chests 32 to 35 inches. The child's extra-large is length adjustable and fits chests 38 to 44 inches. The adult small is 18 inches long from shoulder to hem and fits chests 32 to 35 inches. The adult medium/large and extra-large are length adjustable and the medium/large fits chests 38 to 44 inches, while the extra-large fits chests 46 to 52 inches.

99. WHIRL WHEELIE (MODEL 3425)

    The Whirl Wheelie, model 3425, is an overhead pulley exerciser designed to stimulate clients visually while encouraging bilateral stimulation for hemiplegic individuals. By pulling on the end of each cord with both hands, the disc containing spiral patterns spins around. It is manufactured with high quality materials to ensure long life and comes with four additional disc and a special holder. GUAARANTEE: One full year from shipping date.

Products distributed by Southpaw Enterprises Inc (listed alphabetically)

1. BALZAC BALLOON BALL

   The Balzac Balloon Ball is a large, inflatable, textured balloon designed to encourage motor skills and balance for individuals with a physical disability. Place noisy objects such as coins inside the balloon to make it an audio tracking device for individuals who are hard of hearing. The protective cover allows clients to throw and kick the balloon safely. The Balloon comes with four bladders and a handbook with dozens of ideas. OPTIONS: Also available is a set of four replacement bladders, model 1391, for $18.95. Southpaw reversible bladder covers, model 1393, are fabric on one side and durable vinyl on the other. DIMENSIONS: Diameter is 29 inches. CAPACITY: Working Load 100 pounds. COLORS: Reversible bladder covers come in light blue or burgundy soft jersey. The vinyl side is blue. GUARANTEE: One full year from date of shipment.

2. DELUXE 2-SPEED VIBRATOR KIT (MODEL 4120)

   The deluxe 2-Speed Vibrator Kit, model 4120, is a massager designed to provise sensory stimulation for individuals with a physical disability. It has a choice of two speeds and comes with six interchangable heads. The silent electric motor is not a distraction to tactile activity and the compact size makes it easy for children to handle. On low speed it produces 60 Hz and about 2.5mm amplitudea, while on high speed it produces 120 Hz and about 1 mm amplitude. GUARANTEE: One full year from shipping date.

3. GERTIE BALL

   The Gertie Ball is a textured inflatable ball designed to be grabbed, squeezed, thrown or kicked. Made of non-toxic PVC, it inflates in seconds to different sizes with the included straw. DIMENSIONS: Available in 9-inch and 13-inch models. COLOR: Assorted metallic colors.

4. PHYSIO-ROLL

   The Physio-Roll is a peanut-shaped inflatable roll designed to provide control and security for individuals with physical disabilities during balance activities. With a saddle-shaped middle, the roll cradles the user and the overall shape limits rotation to forward and backward. Used with or without a blanket, the roll can be used in squeeze play and tactile activities. DIMENSIONS: 12, 16, 22, 28, or 34 inches in diameter. CAPACITY: Up to 250 pounds depending on size. COLOR: Red, yellow, or blue depending on size. GUARANTEE: One full year from date of shipment.

5. SLANT BOARD (MODEL 5640)

   The Slant Board, model 5640, is a height adjustable tilt top work table designed to provide a portable work and play surface for individuals with a physical disability. The four angles of adjustment promote three-dimensional play activities. The Slant Board can be used while clients are suspended on the Platform Swing or Linear Glider (see separate entries). It comes with the base, the work surface, a removable work surface cover made of non-glare plastic, a work surface adjustment arm and a removable pencil/book ledge. DIMENSIONS: Base is 16 x 24 inches. Work surface is 18 x 24 inches. WEIGHT: 14 pounds. GUARANTEE: One full year from shipping date.

6. SPORTIME GIANT SLO-MO BALLS

   The Sportime Giant Slo-Mo Balls are inflatable balls designed for use by children and chair users. When partially inflated, they are designed to provide security and stability; when fully infalted, they are designed to offer a challenge to the user's balance. For chair users, the ball can be used for group games. They are made of tactile material. DIMENSIONS: The ball is available in five sizes according to its diameter: 21.5 inches - 25.5 inches - 29.5 inches - 33.5 inches - 37.5 inches. COLORS: Variety.

See Southpaw Enterprises Inc products that are no longer available.