Labac Systems, a division of The Phoenix Group

4965 Kingston Street
Denver, Colorado 80239
United States
Telephone: 800-445-4402 or 303-914-9914.
Fax: 800-249-9955 or 303-914-8101.
Web: http://www.cd-crafters.com/clients/PhoenixGroup/LaBac.html.

Products manufactured by Labac Systems, a division of The Phoenix Group (listed alphabetically)

1. ARM TROUGH (MODEL 07-D)

   Arm trough has molded plastic shell with energy absorbing foam pad covered with molded naugahyde skin. Provides full support from elbow to hand. Overall length is 18 1/2 inches; bed length is 15 1/2 inches, depth, 1 1/4 inches; elbow stop is 3 1/2 inches long and 2 1/2 inches high; inside width is 4 inches, flares at front to 6 1/2 inches.

2. LOW SHEAR POWER RECLINER

   Low shear power recliner for Invacare Arrow recliner frame or sectional frame, or Everest and Jennings recliner frame -47 or -49 and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Comes assembled, includes reclining frame, rigid back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat or back module mount, and a toggle switch to control the system. Back height of 16 inches to 25 inches in one inch increments. Underseat 24 Volt DC actuator, and bearings on all moving parts. Reclines to 173 degrees. Optional: spinal or scapular cutout back, retractable headrest, variable or 2 speed control, tape switches, and pull out battery box/vent tray. Can also be used with power base chairs.

3. POWER BASE RECLINER SEATING SYSTEM

   Power recliner designed for Everest and Jennings Lancer, Fortress 655 FS, Invacare XT powered wheelchairs, Quickie P-300, and Permobile Max90 & Super 90. Assembled; systems include reclining frame, rigid seat, rigid or sliding back, complete armrest and legrest assemblies, arm and leg troughs, standard headrest, toggle switch to control recline, and mounting interface to wheelchair. Rigid back 16 inches to 25 inches, sliding back 19 inches to 25 inches in one inch increments. Underseat 24 Volt DC actuator, and bearings on all moving parts. Reclines to 173 degrees. Controls: variable or 2 speed, toggle switch or tape switch. Switches can be placed on headrest. Optional: spinal or scapular cutout back, retractable headrest, variable or 2 speed control, tape switches.

4. RECLINING ARMS (MODELS 07-A & 07-B)

   Arms attach to backpost of reclining wheelchair to maintain a position relative to the position of the body when reclined. Allows chair controls to move with the arms during the recline. LaBac Systems arm troughs and pads can be mounted on the arms. Arms are strong enough to hold a lap board. Model 07-B ($395) features a quick release mechanism which allows instant removal of armrests.

5. RETRACTABLE HEADREST SYSTEM (MODELS 06-1 & 06-1S)

   Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding back.

6. ROTATIONAL SEATING SYSTEM

   Seating system rotates in space to 45 degrees, maintaining seated position. For Everest & Jennings and Invacare sectional back, recliner, and powerbase (Lancer, XT). Rotating frame, rigid seat, rigid back, standard headrest, complete armrest and legrest assemblies, arm and leg troughs, underseat module mount standard. Toggle switch control. Legs elevate manually. Back heights up to 25 inches in one inch increments. Underseat 24 volt DC actuator, and bearings on all moving parts. Options: semi-reclining back (rigid or sliding) reclines to 30 degrees, spinal or scapular cutout back, variable speed control, tape switches, and pull-out battery box/vent tray. Custom orders available. POWER BASE CHAIRS: Semi recline back not available, only full recline or rotational system available but not both on the same chair.

7. SWINGAWAY LATERAL SUPPORTS

   Lateral supports that can be mounted on LaBac Systems sliding back, on chairs with upholstery mounted on the front of the back posts, and on chairs with upholstery mounted on the back of the back posts. Swingaway feature offers quick client access. Pads available in 3 by 4 inches, 4 by 4 inches, 4 by 5 inches, 4 by 6 inches. Made of molded plastic shell with foam pad. Naugahyde cover. Additional intermediate brackets available.

8. TOGGLE SWITCH (MODEL 10-4)

   Toggle control switch for powered reclining wheelchair. Available for either fixed or variable speed. Has 3 1/2 inch lever. Wire length allows switch to be mounted in a variety of locations.

9. VARIABLE SPEED CONTROL (MODEL 10-1A) & 2 SPEED CONTROL (MODEL 10-12)

   Electrical control, designed for LaBac Systems recline systems allows speed of recline unit to vary from full speed to 50% speed. Maintains full torque at low speeds to accommodate heavier users. Speed control module has complete attendant switches plus a receptacle to plug in user control switch. 2 speed control has speed set at either 100% or 50%.

10. VENTILATOR TRAYS (MODELS 08-PE, 08-PI, 08-PJ, & 08-M)

    Adjustable ventilator or respirator support tray mounts under the wheelchair seat between the rear tires. Model 08-P is a pull out model for power recliners, has 16 inches of travel; battery box holds batteries for wheelchair and back up battery for ventilator; available for Everest & Jennings or Invacare power recliners with LaBac Systems seating systems. Model 08-M is a lift out model for manual wheelchairs; rests on lower rail of chair, is 13 inches wide and 23 inches long with a one inch lip.

11. ZERO SHEAR MANUAL RECLINER

    Zero shear manual recliner for Everest & Jennings recliner wheelchair frames 47 or 49. High quad seating system replaces standard seat. Reclining frame, sliding back, rigid seat, standard headrest. Back height 19 to 25 inches in one inch increments. Reclines to 180 degrees. Options: spinal or scapular cutout back, reclining arms, arm troughs, leg troughs, lateral supports, vent tray. Custom orders available.

12. ZERO SHEAR POWER RECLINER

    Zero shear power recliner for Invacare Arrow recliner frame and sectional back chairs, or Everest & Jennings recliner frames 47 or 49, and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Reclining frame, sliding back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat module mount standard. Toggle switch control. Back height 19 to 25 inches in one inch increments. Underseat 24 volt DC actuator and bearings on all moving parts. Reclines to 173 degrees. Options: cutout back, retractable headrest, variable speed control, tape switches, and pull out battery box/vent tray, lateral supports. Custom orders available.