AbleNet, Inc.

2808 Fairview Avenue North
Roseville, Minnesota 55113-1308
United States
Telephone: 800-322-0956 or 651-294-2200.
Fax: 651-294-2259.
Web: http://www.ablenetinc.com.
Email: customerservice@ablenetinc.com.

Discontinued products manufactured by AbleNet, Inc. (listed alphabetically)

1. ABLENET CONTROL UNIT

   --- DISCONTINUED. (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE. --- The AbleNet Control Unit is a teaching tool and a simple environmental control. The unit may control any two 120V appliances with a single switch (not included). Appliances may be operated as long as the switch is held closed, or a two to ninety second timer may be set. The AbleNet Control Unit reduces the voltage at the user's end to 24V. The AbleNet Control Unit may be controlled by any single switch. DIMENSIONS: 8 x 6 inches. WEIGHT: 3.5 pounds. POWER: 120V AC.

2. APPLE II COMPUTER SWITCH INTERFACE

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Apple II Computer Switch Interface is a switch adapter designed to link a single switch to an Apple computer in order to operate software written especially for single switch control using one or two switches, or to take part in controlling the action of many commercially available games or early-learning software. CONNECTIONS: The Apple Computer Switch Interface connects through the external joystick port (9-pin connector). DIMENSIONS: 2 x 2.75 inches. WEIGHT: 3 ounces.

3. BATTERY DEVICE TIMER

   --- DISCONTINUED. (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE. --- The Battery Device Timer is a device that controls the "on" time of battery-operated devices such as toys, games, and radios. A switch is plugged into the Timer, and the Timer is plugged into the device to be controlled. When the switch is activated, the controlled device will operate for a preset period of time. The possible "on" time length ranges from 2 to 40 seconds, and is adjusted with the control knob on the Timer. The device to be controlled must be adapted for external switch control; contact manufacturer for details. DIMENSIONS: 3 x 4 inches. WEIGHT: 8 ounces. POWER: 9V battery.

4. CORDLESS BIG RED SWITCH & CORDLESS RECEIVER PACKAGE

   --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Cordless Big Red Switch is a cordless button switch designed for use by individuals with limited upper limb mobility or strength. This switch offers four modes of control: direct mode, which activates the appliance only while the switch is activated; timed seconds mode, where activation of the cordless switch operates the appliance for a pre-set period from one to 60 seconds; timed minutes mode, where activation of the switch operates the appliance for a preset period from one to 60 minutes; and latch mode, where one activation of the switch turns the appliance on, and the second activation turns it off. The switch has 16 address codes labeled A through P to correspond with receiver (see separate entry) address codes. The switch is made of durable, high impact ABS plastic and features an on/off switch and an external switch jack. DIMENSIONS: This switch has a 5-inch diameter surface and is 2.25 inches high at its tallest point. COLOR: The switch has a gray base and comes with a choice of a red, green, blue, yellow or black top. WARRANTY: One year.

5. HEAVY DUTY CAP SWITCH (MODEL 58830)

   --- DISCONTINUED. (Verified 1/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Heavy Duty Cap Switch, model 58830, is a touch switch designed for use by individuals with upper extremity disabilities who have good ability to target smaller surfaces. This small, round single switch is activated using 14 ounces of pressure anywhere on the surface and provides tactile and auditory feedback upon activation. The case is made of heavy-duty plastic for durability. DIMENSIONS: 1.75 x 1 inch.

6. IMAGINATION STATION

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Imagination Station is a switch adapted craft aid designed to enable people with upper extremity disabilities to cut, staple, use a hole punch, or use rubber stamps. This device utilizes standard scissors, staplers, rubber stamps, and hole puches and does not require adapted tools. The tool or tools to be used are placed in the device and can then be activated using a single switch connected to the device's built-in jack (switch not included).

7. JELLY BEAN BOOSTER SWITCH

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Jelly Bean Booster Switch is a button or touch switch designed for use by people with upper extremity disabilities. Intended to control a wide range of electrically- or battery-operated devices and toys, the switch is contained in a high-impact disk and the entire surface of the switch is sensitive to pressure and the angled base allows for greater access. A detachable AbleLink Connectables base allows users to link several Jelly Bean Booster switches together for choice-making activities. The detachable base and Snap Track connector cord are included. The switch requires less than two ounces of pressure for activation. DIMENSIONS: The switch is 2.5 inches in diameter and 3 inches tall at its highest point. The Snap Track connector cord is 6 inches long. The switch is equipped with a standard 1/8-inch (3.5 mm) plug. COLORS: The base of the switch is black and the switch surface is available in a choice of red, pink, yellow, green, blue, purple, or black. WARRANTY: Three-year warranty.

8. JELLY BEAN SWITCH HOLDERS

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Jelly Bean Switch Holders are control switch accessories designed for mounting Able Net Inc.'s Jelly Bean switches (see separate entries). Models are available to mount two switches ($30) and four switches ($36). The holders mount to table tops with Velcro, Dual-Lock, or Blue-Tac adhesives to prevent sliding. The holders may be used with or without the switch guard (included). The holders are made of anodized aluminum and no tools are required to install the switches. DIMENSIONS: The 2-switch holder is 9 inches long; the 4-switch holder is 15 inches long. COLOR: Black.

9. LET'S GO! ACTIVITY PACK--COOL IT!

   --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's GO! Activity Pak--Cool It! is an educational aid designed to encourage interactive communication and participation in daily living activities for children with communication, physical, and cognitive disabilities. Designed to encourage children to use communication aids and switches during activities, this set includes a Windmere Fan pre-adapted for switch use (switch not included), a clip, a pinwheel, a spiral-bound Activity Guide, and a storage box. POWER: Batteries are included for the fan.

10. LET'S GO! ACTIVITY PACK--MIX IT!

    --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's GO! Activity Pak-- Mix It! is an educational aid designed to encourage interactive communication and participation in daily living activities for children with communication, physical, and cognitive disabilities. Designed to encourage children to use communication aids and switches during activities, this set includes a Mix-It-Up mini-mixer pre-adapted for switch use (switch not included), hot chocolate mix, a spiral-bound Activity Guide, and a storage box. POWER: Batteries are included for the mixer.

11. LET'S GO! ACTIVITY PACK--PLAY IT!

    --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's Go! Activity Pak-- Play It! is a reading tutorial program with an adapted cassette tape recorder designed for use by children with upper extremity, cognitive, or communication disabilities. This Pak includes an Optimus cassette player pre-adapted for switch use, the Dr. Seuss book Green Eggs and Ham in cassette tape and book format, symbol, and a spiral-bound Activity Guide. POWER: The tape player is battery operated (batteries included).

12. LET'S GO! ACTIVITY PACK--SAY IT!

    --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's GO! Activity Pak-- Say It! is a math skills training system designed for use with children with cognitive and communication disabilities.This activity empowers children to help peers build vocabulary and math skills. The included message cards and the switch-adapted recorder enables disabled children to participate and interact with non-disabled peers during math activities.The kit includes a pre-adapted Can-Do recorder, 50 blank message cards, math activity book, a spiral-bound activity guide, and a storage box. POWER: The Can-Do Recorder is battery powered (batteries included).

13. LET'S GO! ACTIVITY PACK--SHARE IT!

    --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's GO! Activity Pak-- Share It! is a communicator training program designed for use by children with communication disabilities. Designed to encourage children to use communication devices, this set includes a BIGmack Communication Aid (see separate entry), Snap Switch Cap (see separate entry), a book entitled My Little Sister Ate One Hare, symbol, sample messages, and spiral-bound Activity Guide. POWER: Batteries are included for the BIGmack.

14. LET'S GO! ACTIVITY PACK--SHRED IT!

    --- DISCONTINUED. (Verified 11/2003) RETAINED IN DATABASE FOR REFERENCE. --- Let's GO! Activity Pak--Cool It! is an educational aid designed to encourage interactive communication and participaton in vocational activities for children with communication, physical, and cognitive disabilities. Designed to encourage children to use communication aids and switches during activities, this set includes a Secure Shred paper shredder pre-adapted for switch use (switch not included), symbol, 20 sheets of fluorescent paper, a glue stick, a spiral-bound Activity Guide, and a storage box.

15. ONE-SWITCH SINGLE-APPLIANCE UNIT (MODEL 1490 & 1490-8)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The One-Switch Single-Appliance Unit is a control switch interface unit designed to enable individuals with physical disabilities do operate appliances such as televisions, lamps, radios, and stereos using a single switch. The appliance to be controlled is plugged into the receiver and activated using the remote transmitter from a distance of up to 30 feet. The transmitter can be activated with or without a capability switch (not included). The appliance is turned on with the first transmitter activation and turned off with the second transmitter activation. Model 1490 is equipped with a quarter-inch jack and model 1490-8 is equipped with a 1/8-inch jack.

16. PC SWITCH INTERFACE

    ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- Th PC Switch Interface is a control switch interface unit designed to provide switch operation for software designed for switch control for individuals who have limited upper limb mobility. This unit allows for the connection of one to four switches which each controls a different keyboard function. It is compatible with a variety of commercially available PC-compatible software programs. It has a 25 pin interface. OPTIONS: Nine pin interface is sold separately.

17. POWERLINK 2

    ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- The PowerLink 2 is a control switch interface unit designed to allow the user to operate two electrical appliances simultaneously (up to a 1500 watt capacity) with a switch. The device has three modes of control: Direct, which keeps appliances turned on while the switch is activated; Timed, which keeps devices turned on for 1 second to 60 minutes each time the switch is activated; and Latch, which provides one-touch on and one-touch off control of appliances.

18. POWERLINK 3 CONTROL UNIT

    --- DISCONTINUED. (Verified 12/2009) REPLACED BY POWERLINK 4 (SEE SEPARATE ENTRY) RETAINED IN DATABASE FOR REFERENCE. --The PowerLink 3 Control Unit is a control switch interface unit designed to allow the user to operate two electrical appliances simultaneously with a switch. The device has four modes of control: Direct, which keeps appliances turned on while the switch is activated; Timed, which keeps devices turned on from one second to 60 minutes each time the switch is activated; Latch, which provides one-touch on and one-touch off control of appliances, and Remote, which allows the attached devices to be controlled remotely using the AirLink Cordless Switch (sold separately; see separate entry). The unit can also be used with corded switches using the two jacks in the front. This device may also be used for turn taking and choice making as the outlets do not work simultaneously. This device has rounded corners, a low profile, and features a flexible handle and a cord minder. OPTIONS: Mounting bracket.

19. REMOTE CORDLESS UNITS (MODELS 5150, 5160, & 5170)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Remote Cordless Units are television, VCR, and cable box remote controls designed to enable individuals with physical disabilities to operate televisions, VCRs, and cable boxes using one or more single switches. The units have jacks on the side to enable a switch to be plugged in for each remote function (for example, channel up, channel down, volume up, volume down, stop, play, and on/off). Switches can be used for one or more functions depending on the user's needs. Model 5150 is a TV remote module, model 5160 is a VCR remote module, and model 5170 is a cable box module.

20. SLIDE PROJECTOR CONTROL

    --- DISCONTINUED (VERIFIED 6/96) RETAINED IN DATABASE FOR REFERENCE. --- The Slide Projector Control is a control switch interface unit designed to link a single switch with most models of Kodak Carousel slide projectors. The devices 5-prong plug connects to the remote control input port on the slide projector. The switch must be activated, released, and reactivated to advance a single slide.

21. SLIDE PROJECTOR CONTROL ADAPTER (MODEL 1-SPC2)

    --- DISCONTINUED. (Verified 10/2002) RETAINED IN DATABASE FOR REFERENCE. --- The Slide Projector Control Adapter, model 1-SPC2, is a control switch interface unit designed for use by indiviudals with limited upper extremity mobility. This unit attaches to the slide projector control, providing users a larger target for controlling any Caramate or Kodak Carousel projector. For users who cannot easily release a switch, the manufacturer suggests adding a Switch Latch and Timer (see separate entry) to prevent rapid slide advancement.

22. SMALL APPLIANCE RECEIVER & CORDLESS RECEIVER

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Small Appliance Receiver and the Cordless Receiver are control switch interface units designed to enable switch-adapted toys and appliances to be operated by the Cordless Big Red Switch (see separate entry) for individuals with upper extremity disabilities. The Small Appliance Receiver ($33.99) accepts low-wattage (under 500 watts) appliances with two-prong plugs, such as fans, lamps or radios. The Cordless Receiver ($83.99) will operate electrical appliances adapted with a control unit such as the PowerLink 3 Control Unit (see separate entry); communication aids such as the SpeakEasy Communication Aid (see separate entry); pre-adapted toys and appliances; or computers via a computer switch interface. The Cordless Receiver operates devices up to 1700 watts. Both devices include 16 address codes to correspond with those on the Cordless Big Red Switch. POWER: The Cordless Receiver uses four triple-A batteries (not included).

23. SPEAKEASY COMMUNICATION AID

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The SpeakEasy Communication Aid is a direct selection communicator designed for use by nonvocal individuals and those with speech disabilities. The unit's digital sound chip can store and play back up to 12 recorded messages. The messages are retrieved by pressing the corresponding symbol on the built-in twelve-key membrane keyboard. Symbols may be changed in accordance with message changes. Stored messages may also be retrieved through single switch input; twelve switch input jacks correspond with the stored messages and the membrane keys. A message stop feature, when activated, causes a second activation of the key or switch to stop the message being played. The unit can be connected to toys or appliances to allow the user to experience voice output paired with a reinforcer. Other features include an on/off switch to prevent accidental activations, an easy-to-open standard nine-volt battery drawer, and a detachable shoulder strap. Two cables are supplied with the splash-resistant device. POWER: Uses either a 9-volt battery (not included) or an alternating current (AC) adapter (included). OPTIONS: A carrying case and a keyguard are available. DIMENSIONS: 7.5 x 5.5 x 1.75 inches. WEIGHT: One pound.

24. STEP-BY-STEP COMMUNICATOR 75 WITH LEVELS

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Step-by-Step Communicator 75 with Levels is a touch switch and direct selection communicator designed for use by individuals with visual or upper extremity disabilities and communication disabilities. This communication aid offers 75 seconds of recording time and is designed to record a series of messages in different levels. A level acts as a "folder," that stores a category of messages or a series of messages related to a particular activity. DIMENSIONS: 2.5 inches in diameter and 3 inches high at its tallest point. COLOR: The communicator has a black base and the switch surface is available in red, pink, yellow, green, blue, purple, or black.

25. SWITCH LATCH INTERFACE

    --- DISCONTINUED. (Verified 02/93) RETAINED IN DATABASE FOR REFERENCE. --- The Switch Latch Interface allows any momentary switch to be operated in a latching mode. This mode allows the user to turn a device on with one touch of the switch; the device will then stay on until the switch is depressed again. The interface can be used with electrical and battery-operated systems by connecting it between a switch and a control unit or a battery device adapter. DIMENSIONS: 3.25 x 4.5 inches. WEIGHT: 11 ounces.

26. SYMBI-KEY COMPUTER INTERFACE

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Symbi-Key Computer Interface is a single switch keyboard modification designed for use by individuals with severe or profound disabilities. This unit installs quickly and works with any switch-accessible or commercially available software and can be used with Windows and DOS applications.Symbi-Key allows up to 27 different switch setups to be stored, enabling it to be used with a variety of different programs without having to be reprogrammed. It also features "repeat" and "delay" keys so that switch activation can be modified for individuals who continuously hold down a switch or who activate it repetitively within a short period. Mouse functions may also be programmed for systems equipped with Windows95. COMPATIBILITY: For use on IBM and compatible computers.

27. TALKTRAC PLUS WEARABLE COMMUNICATOR

    --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- The TalkTrac Plus Wearable Communicator is a direct selection communicator designed for use by children and adults with communication disabilities. Designed to be worn like a watch, this device comes with two interchangeable adjustable wrist bands and offers four message areas with a total of up to 70 seconds of recording time. Messages are activated by pressing one of the four activation areas on the face of the unit. The device offers two volume levels and has quick-start instructions printed on the activation area membrane. POWER: Uses rechargeable nickel-metal hydride battery (included). A battery charger is also included. DIMENSIONS: The unit is 3 x 1 5/8 x 0.75 inches. Each of the message activation areas is one-inch square. WEIGHT: 2.5 ounces.

28. TALKTRAC PLUS WITH LEVELS WEARABLE COMMUNICATOR

    --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- The TalkTrac Plus with Levels Wearable Communicator is a direct selection communicator designed for use by children and adults with communication disabilities. Designed to be worn like a watch, this device comes with two interchangeable adjustable wrist bands and offers eight message areas on two levels with a total of up to 65 seconds of recording time. Messages are activated by pressing one of the four activation areas on the face of the unit. Depressing two buttons simultaneously switches between message levels. The device offers two volume levels and has quick-start instructions printed on the activation area membrane. POWER: Uses rechargeable nickel-metal hydride battery (included). A battery charger is also included. DIMENSIONS: The unit is 3 x 1 5/8 x 0.75 inches. Each of the message activation areas is one-inch square. WEIGHT: 2.5 ounces.

29. TALKTRAC WEARABLE COMMUNICATOR

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The TalkTrac Wearable Communicator is a direct selection communicator designed for use by children and adults with communication disabilities. Designed to be worn on the wrist, this communicator offers 75 seconds of recording time in up to four messages. The messages are activated by pressing the corresponding activation area on the top of the device. OPTIONS: BoardMaker software (see separate entry) with TalkTrac overlays. DIMENSIONS: Each of the four activation areas is one inch square.

30. TRUE FRIENDS

    ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- True Friends is a coloring book emulation program designed to portray familiar childhood experiences for individuals who have a disability. The program can be played by one person using a switch or by two people alternating turns between a switch and a keyboard. It encourages interaction between children with disabilities and their family and peers. Because the animal characters are from different countries and two of them have disabilities, it is also a good way to introduce diversity to young children. The program has an audio option for musical notes and children's voices, and can be personalized to suit a child through a variety of selections in the Options Menu. COMPATIBILITY: PC compatible for DOS. OPTIONS: A PC Switch Interface that can connect one to four switches for the operation of software is available from AbleNet (see separate entry).

31. TV & VCR REMOTE

    --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- The TV & VCR Remote is a television remote control designed for use by individuals with upper extremity disabilities. This programmable single switch controls most television and VCR models. To control a television, the first switch activation turns the set on, each subsequent activation changes the channel, and the last activation turns it off. To control a VCR, one activation turns the television on, sets it to the correct channel, and starts the play function. These devices can also be used in a series, with one acting as an on/off switch, another to change channels, and a third to mute. An instruction manuals is included. POWER: Uses one nine-volt battery (not included). DIMENSIONS: 2.5 inches in diameter and 3 inches high at its tallest point. COLOR: Black base and a choice of a yellow or grey switch surface. WARRANTY: One year warranty.

32. TWO-SWITCH SINGLE-APPLIANCE UNIT (MODEL 1491 & 1491-8)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Two-Switch Single-Appliance Unit is a control switch interface unit designed to enable individuals with physical disabilities do operate appliances such as televisions, lamps, radios, and stereos using one or two single switches. The appliance to be controlled is plugged into the receiver and activated using the remote transmitter from a distance of up to 30 feet. With one switch, the appliance is turned on with the first transmitter activation and turned off with the second transmitter activation. When used with two switches, one switch activates the appliance and the second turns it off. Model 1491 is equipped with a quarter-inch jack and model 1491-8 is equipped with a 1/8-inch jack.

33. USB KING KEYBOARD (MODELS 24650, 24651, 24652, 24653, 24655, & 24660)

    --- DISCONTINUED. (Verified 04/2012) RETAINED IN DATABASE FOR REFERENCE. ---The USB King Keyboard is a large keyboard designed for use by individuals with fine motor, upper extremity, or neurological disabilities or spinal cord injury. This keyboard plugs directly into a USB port and features slightly recessed keys and provides auditory and tactile feedback. Mouse functions (directions, right or left click, double click, and drag and drop) are performed using keyboard keys while in mouse mode. Seven ounces of force are required to activate keys. The keyboard is available in English QWERTY (model 24650), Swedish Finnish QWERTY (model 24651), Danish Norwegian QWERTY (model 24652), Italian QWERTY (model 24653), German QWERTY (model 24654), French AZERTY (model 24655), and English Frequency of Use (model 24660). COMPATIBILITY: For use on IBM and compatible or Apple computers. SYSTEM REQUIREMENTS: For IBM and compatible computers, a USB port or hub and Windows 98 or higher with accessibility features are required. Apple computers require a USB port and Mac OSX 10.1 or higher with universal access loaded. DIMENSIONS: The keyboard is 21.5 x 11 x 2.25 inches and the keys are 1.25 x 1.25 inches. WEIGHT: 5.5 pounds.

34. WINDOW SNAP SWITCH CAPS KIT (MODELS WSBR & WSJB)

    --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---Window Snap Switch Caps Kits are touch switch accessories designed for use by individuals with upper extremity or visual disabilities and communication disabilities. These caps allow tactile communication or labeling symbols to be placed and protected on touch switches. The clear, semi-rigid plastic doughnut-shaped covers enable unobstructed viewng of labels and symbols, as well as tactile access through the round center opening. Tactile symbols are placed on the included adhesive disks and placed under the cap. Each kit includes one Window Snap Switch Cap and five adhesive discs. Model WSJB is designed for use with Jelly Bean Switches and AbleLink Connectable products (see separate entries) and model WSBR is designed for use with Big Red and the Cordless Big Red Switches, as well as with the BIGmack Communication Aid (see separate entries). OPTIONS: Sets of 10 adhesive disc refills are available. DIMENSIONS: Model WSJB is 2.5 inches in diameter and model WSBR is 5 inches in diameter.

Discontinued products distributed by AbleNet, Inc. (listed alphabetically)

1. BIG BUBBA BUBBLE MACHINE

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Big Bubba Bubble Machine is a battery operated toy designed for use by children with upper extremity disabilities. This paddle-style bubble maker creates numerous bubbles in a variety sizes. When used with a Battery Device Adapter (not included; see separate entry), this toy may be operated using a single switch. POWER: Uses double-A batteries.

2. BOARDMAKER (INTERNATIONAL)

   --- DISCONTINUED. (Verified 02/2013) RETAINED IN DATABASE FOR REFERENCE. ---BoardMaker International is a symbolic communicator computer program designed to access over 3,000 symbols contained in the Picture Communication Symbols (PCS) Books I, II, and III (see separate entry) for use by persons who communicate nonvocally. The program features a cut and paste system that allows the user to select and paste communication symbols on any software program that accepts symbols. The symbols may be reduced or enlarged to any size. Symbols up to 4 inches in size may be used in conjunction with a compatible desktop publishing program to create worksheets, picture instruction sheets, journals, posters, and bulletin boards. Hard copies of the displays may be printed and saved to disk (see your computer software retailer for compatibility information). Additional features include a language translator, which allows the user to find and display symbols without necessarily knowing the language which the symbol is being translated into. Languages currently included are English, Spanish, French (Canadian), Portuguese, Danish, Swedish, German, Dutch, Norwegian and Italian. A program manual and assorted pre-made blank grids and a drawing program are included with the software. COMPATIBILITY: Macintosh and IBM Windows. SYSTEM REQUIREMENTS: Macintosh computers, minimum 2 megabytes RAM and a hard disk drive required.

3. CLIP-ON FAN

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Clip-On Fan is a switch-adapted appliance designed for use by individuals with upper extremity disabilities. This plastic fan has foam blades, an adjustable neck, and a large plastic clothespin-style clamp. For use with a switch, a Battery Device Adapter (not included; see separate entry) is required. POWER: Requires 2 AA batteries. DIMENSIONS: 5 inches tall.

4. HANDI-TAK

   --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- Handi-Tak is a surface anchor designed to secure switches and other lightweight items to flat surfaces. This adhesive is sticky, moldable, and reusable.

5. L.T. SWITCH (MODEL 705)

   ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- 1The L.T. Switch is a rocker switch designed for users with limited strength. The switch is activated with 3/4 of an ounce of pressure, and emits a click when activated for audio feedback. It may be used on a desktop, or with a head or chin mount. DIMENSIONS: 3 7/8 by 2 by 1 1/8 inches with 3.5 mm jack. Cable length is 69 inches, with 3.5 mm plugs at either end. COLOR: Available in choice of red, yellow, green, blue, or black with matching cord.

6. MIRROR GO LIGHTLY

   --- DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. ---The Mirror Go Lightly is a lighted mirror designed for individuals with low vision. This tabletop mirror offers three times the magnification of standard mirrors and features glare-free side lighting for enhances visibility. POWER: Uses standard alternating current (AC). DIMENSIONS: 5.5 x 8 x 3 inches.

7. MUSICBLOCKS MAESTRO

   --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- MusicBlocks Maestro is an educational toy designed for use by children with fine motor or cognitive disabilities. Once a music cartridge is placed in the unit, children press one of the brightly-colored blocks on the unit to play a musical phrase. Pressing on the side of the same block plays a variation on that phrase. Pressing another block plays another phrase, enabling children to create musical compositions. The unit is equipped with a digital processor and stereo speakers. A classical music cartridge with selections from Bach and Beethoven is included. OPTIONS: A world music cartridge with music from around the world is available.

8. POLAROID IMPULSE CAMERA

   --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Polaroid Impulse Camera is a switch adapted camera designed for use by individuals with upper extremity disabilities. This camera takes self-developing photographs, includes a flash, and is adapted for use with a single switch (not included).

9. ZIZZERS

   ---DISCONTINUED. (Verified 12/99) RETAINED IN DATABASE FOR REFERENCE. --- Zizzers are scissors that are designed to be switch operated for individuals with limited upper limb mobility. The device is battery operated and comes with an easily replaceable blade. The use of this device with a switch requires a Battery Device Adapter (see separate entry). POWER: Requires 2 AA Batteries.

See AbleNet, Inc. products that are currently available.