Theradapt Products Inc.

922 North Washington Avenue
Ludington, Michigan 49431
United States
Telephone: 800-261-4919.
Fax: 866-892-2478.
Web: http://www.theradapt.com.
Email: customerservice@theradapt.com.

Products manufactured by Theradapt Products Inc. (listed alphabetically)

1. ACTIVE WHEELCHAIR PLATFORM ROCKER

   The Active Wheelchair Platform Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility or neurological disabilities, Alzheimer's disease, or spinal cord injury. This unit is designed to enable an individual to experience the benefits of rocking without transfering from a wheelchair. The rocker features an entry/exit rear ramp, adjustable front caster stops to center the wheelchair on the platform, and two safety wheelchair tie-down straps. The Active Platform Rocker has a long platform design to accommodate individuals who seek sensory input through rocking, tend to rock vigorously, or use a wheelchair with a long base. DIMENSIONS(LxW): 60 x 30 inches.

2. ADJUSTABLE ANGLE BENCHES

   The Adjustable Angle Benches are designed for use by children with balance or lower extremity disabilities. These wooden benches are padded and covered with slip-resistant Naugahyde. The seat angle adjusts 10 to 30 degrees in 5-degree increments. The benches also convert to horizontal benches. SIZES: Early Intervention/Preschool and Primary/Intermediate. DIMENSIONS(WxLxH): The Early Intervention/Preschool model is 12 x 24 x 6.5 to 10.5 inches and the Primary/Intermediate model is 12 x 29 x 11 to 17 inches.

3. ADJUSTABLE POSITIONING CHAIR - EARLY INTERVENTION (MODEL APC100)

   The Adjustable Positioning Chair – Early Intervention, model APC100, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle between 80 and 100 degrees for individualized therapeutic pelvic positioning. The U-shaped side frames allow the height of the chair to be adjusted vertically, or angled at a 5, 10, or 20 degrees tilt in space. The chair comes standard with a removable abduction pommel and a 45-degree angle pelvic positioning belt. OPTIONS: Corner Back Insert, Low Back Insert, Flat Back Insert, Winged Back Insert, tray, adduction pads, footplate, arm rests, seat pad, back pad, and side pads. DIMENSIONS (HxDxW): 6 to 11.5 inches x 6 to 10 x 3 to 14 inches.

4. ADJUSTABLE POSITIONING CHAIR - PRESCHOOL / PRIMARY (MODEL APC200)

   The Adjustable Positioning Chair – Preschool/Primary, model APC200, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle between 80 and 100 degrees for individualized therapeutic pelvic positioning. The U-shaped side frames allow the height of the chair to be adjusted vertically, or angled at a 5, 10, or 20 degrees tilt in space. The chair comes standard with a removable abduction pommel and a 45-degree angle pelvic positioning belt. OPTIONS: Corner Back Insert, Low Back Insert, Flat Back Insert, Winged Back Insert, tray, adduction pads, footplate, arm rests, seat pad, back pad, and side pads. DIMENSIONS (HxDxW): 3 to 18 inches x 8 to 13.5 x 8 to 12 inches.

5. ADJUSTABLE POSITIONING CHAIR - PRIMARY / INTERMEDIATE (MODEL APC300)

   The Adjustable Positioning Chair – Primary/Intermediate, model APC300, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle between 80 and 100 degrees for individualized therapeutic pelvic positioning. The U-shaped side frames allow the height of the chair to be adjusted vertically, or angled at a 5, 10, or 20 degrees tilt in space. The chair comes standard with a removable abduction pommel and a 45-degree angle pelvic positioning belt. OPTIONS: Corner Back Insert, Low Back Insert, Flat Back Insert, Winged Back Insert, tray, adduction pads, footplate, arm rests, seat pad, back pad, and side pads. DIMENSIONS (HxDxW): 12 to 17.5 inches x 8 to 14 x 8 to 28 inches.

6. ADJUSTABLE STRADDLE BENCH

   The Adjustable Straddle Bench is a forward tilt seat designed for use by children with balance, neurological, or lower extremity disabilities. This bench allow one end to be raised for anterior pelvic tilt and it can be converted to a standard bench. Controlled rocking facilitates balance and righting reactions and encourages appropriate weight shifting. SIZES: Early Intervention/Preschool, Preschool/Primary, and Primary/Intermediate. DIMENSIONS(WxLxH): The Early Intervention/Preschool model is 7.5 x 18 x 7 to 10 inches. The Preschool/Primary model is 9 x 21 x 9. to 13.5 inches. The Primary/Intermediate model is 10.5 x 24 x 12 to 18 inches.

7. CHALLENGE PLATFORM WHEELCHAIR ROCKER

   The Challenge Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This device enables individuals to experience the benefits of rocking without transferring from a wheelchair and is designed for individuals with good upper-body strength and a sense of balance. The platform base has minimal arc, requiring users to exert more force to cause rocking movement.Features include entry/exit from the platform using a rear ramp, adjustable front caster stops to center the wheelchair, and two safety straps that tie the wheelchair to the platform for added security. DIMENSIONS(LxW): 48 x 30 inches.

8. EASY PLATFORM WHEELCHAIR ROCKER

   The Easy Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals who use wheelchairs. This device enables the user to experience the benefits of rocking without transfering from a wheelchair. The rocker features entry/exit using a rear ramp. The adjustable front caster stops center the wheelchair on the platform and two safety straps secure the wheelchair to the platform for added security. DIMENSIONS (LxW): 48 x 30 inches.

9. EXTENDED EASEL (MODELS EE100, EE100D, EE200D, & EE200S)

   Extended easel functions as three different pieces of furniture. Floor easel is designed for child for long sitting activities. Raised book edge holds material at a 20 degree angle and also adjusts to a horizontal plane for play. Adjustable leg set converts floor easel into a portable desk adjustable from 21 inches to 27 inches in height. Capable of converting to horizontal setting. Intermediate size converts easel to a smaller desk 14 inches to 21 inches in height. The seat block converts floor easel to an adjustable height forward tilt seat ideal for promoting anterior pelvic tilt and trunk extension. Improves posture for fine motor activities and facilitates forward weight shift in sit to stand activities. Easel top is 22 inches wide by 16 inches deep.

10. EXTENDED TRAY EASEL

    Extended easel tray has a 20 by 24 inch surface with a 14 1/2 inch cutout. Designed to interface with the TherAdapt Mini- or Primary Cube Chairs and the Mini-Prone Stander. Top adjusts to 30 degree angle. The large model is 28 inches wide by 23 inches deep with an 18 1/4 by 4 1/2 inch cutout. Three types of legs are available for both sizes: 9 to 15 inches high, 15 to 21 inches high or 26 to 32 inches high.

11. FLIP TOP EASEL

    Flip top easel has a 45 degree angle with book edge for reading and a reverse 30 degree slant for writing and drawing. Skid resistant base. 18 inches wide by 16 inches high.

12. MINI-BOLSTER CHAIR

    Chair with straddle position design. Adjustable height, 8 to 11 inches. Accessories: 28 1/2 inch wide by 22 inch deep tray, adjustable pelvic strap, and handle. 22 inch by 19 1/2 inch base with swivel casters and safety railing available. .

13. PRIMARY BOLSTER CHAIR

    Chair with a flat padded bolster bench. Foot railings to maintain foot placement. with or without straps. Adjustable pelvic straps and tray. Back slots accept the TherAdapt Winged Back Insert and Thoracic Pads. 2 inch swivel casters. Bolster is 8 1/2 inches wide, 22 inches long and adjusts 9 to 15 inches in height. Tray is 28 inches wide, 28 inches deep and adjusts 5 1/2 to 8 1/2 inches cutout depth. Base is 29 by 20 1/2 inches.

14. THERADAPT ADULT ANGLE STRADDLE BENCH

    The Adult Angle Straddle Bench is a forward tilt seat designed for use by individuals with balance, neurological, or lower extremity disabilities. This bench can be adjusted for use as a a horizontal bench, an angle bench, or a rocking bench (a rocker base is included). The height- and angle-adjustability provided when using the angle base promotes an anterior pelvic tilt, erect sitting posture, and increased weight bearing through the lower extremities. When using the rocker base, the bench encourages lateral weight shifting activities in a straddle position. In the forward sitting position, it promotes anterior/posterior weight shift activities. The padded seat is covered with slip-resistant suede Naugahyde for comfort and stability. The bench adjusts horizontally or angles forward in 5-degree increments from 10 to 30 degrees. It comes complete with a set of rockers to convert it to a rocking base. DIMENSIONS(WxLxH): 12 x 32 x 15 to 24 inches.

15. THERADAPT MINI-PRONE STANDER

    The TherAdapt Mini-Prone Stander is designed to provide early intervention aged children with appropriate support for weight bearing and anti-gravity orientation. The unit is free-standing and adjusts in 10 degree increments from 10 to 30 degrees back from vertical. The rounded chest plate with trunk pad, measured from the foot plate, is height adjustable from 20 to 26 inches. The padded knee bar adjusts from 5.5 to 10 inches. The stander has two separate 1-inch hook and loop adjustable pelvis straps which can be placed in four different slots for more precise control. The padded adjustable knee pads and lateral guides are attached to the bar and sides with hook and loop to allow exact pad placement. This portable unit is moved by tilting the base back on its two casters. Other features include adjustable thoracic pads, abductor pommel, and adjustable foot guides with non-skid tread. The stander's overall height can "grow" two additional inches by repositioning the chest plate bolts in lower pre-drilled holes. The thoracic pads' four hole height adjustment also increases the height range available. DIMENSIONS: The base is 28 inches long x 18 inches wide.

16. THERADAPT MINI-SUPINE STANDER

    The TherAdapt Mini-Supine Stander is a standing table designed and sized to meet the needs of children in early intervention programs. The hinged lower back lowers for positioning and adjusts in 5 degree increments back 20 degrees from vertical. The stander comes equipped with adjustable angle tray; adjustable trunk and knee pads; pelvic, knee and chest straps; dual adjustable thoracic pads; and ankle straps secured with double D-rings. The stander can be moved by tilting back and rolling it on non-swivel castors mounted at the back of the base. OPTIONS: Lateral Pads ($50) for head positioning; the TherAdapt Butterfly Kit ($60); the Height Extender ($50); Angle Extender ($35); Foot Strips ($5 per pair); and the Knee Pads ($25 per pair). DIMENSIONS: The base is 15 inches wide x 29 inches long; the higed back is 15 inches wide x 36 inches high. The foot stand cut out is 3.5 inches wide x 7.5 inches long; the tray is 20 inches deep x 24 inches wide with a 9 inches wide x 7 inches deep cutout.

17. THERADAPT POSTURE CHAIR WITH LUMBAR SUPPORT

    The TherAdapt Posture Chair with Lumbar Support is a posture chair for preschool/primary or intermediate aged children. The Posture Chair positions child in a semi-kneeling position with forward tilting seat, keeping the back straight and the pelvis in proper position. The seat is height adjustable with dual adjustable knee pads. The chair has front castors. SIZES: Preschool/primary fits children 3 to 4 feet tall; Intermediate fits children 4 to 5 feet tall. OPTIONS: Velcro straps, seat belts, tray, and dual adjustable lumbar/sacral pad.

18. THERADAPT PRIMARY PRONE STANDER

    The TherAdapt Primary Prone Stander is designed to provide early grade school aged children with appropriate support for weight bearing and anti- gravity orientation. (A smaller Mini-Prone Stander is also available - see separate entry.) The unit is free-standing and adjusts in 10 degree increments from 10 to 30 degrees back from vertical. The rounded chest plate with trunk pad, measured from the foot plate, is height adjustable from 27 to 34 inches. The padded knee bar adjusts from 6.5 to 12.5 inches (mid-board measurement). The stander has two separate 1-inch hook and loop adjustable pelvis straps which can be placed in four different slots for more precise control. The padded adjustable knee pads and lateral guides are attached to the bar and sides with hook and loop to allow exact pad placement. This portable unit is moved by tilting the base back on its two casters. Other features include adjustable thoracic pads, abductor pommel, and adjustable foot guides with non-skid tread. DIMENSIONS: 22" x 36" base. The stander's overall height can be diminished 2.25 additional inches, then adjusted in 3/4 inch increments as the child grows. OPTIONS: For "in-between" sized children, the adjustable Foot Plate Riser can be purchased ($40) and used in conjunction with the height adjustable stand to fit the child.

19. THERADAPT PRIMARY SUPINE STANDER

    The TherAdapt Primary Supine Stander is a standing table designed and sized to meet the needs of primary aged children. The hinged lower back lowers for positioning and adjusts in 5 degree increments back 20 degrees from vertical. The stander comes equipped with adjustable angle tray; adjustable trunk and knee pads; pelvic, knee and chest straps; dual adjustable thoracic pads; and ankle straps secured with double D-rings. The stander can be moved by tilting back and rolling it on non-swivel castors mounted at the back of the base. DIMENSIONS: The base is 20 inches wide x 40 inches long; the hinged back is 20 inches wide x 48 inches high. The foot stand cut out is 4.5 inches wide x 10 inches long and the tray is 24 inches deep x 30 inches wide with an 11 inches wide x 8 inches deep cutout. OPTIONS: Lateral Pads ($50); the TherAdapt Butterfly Kit ($70); the Height Extender ($50); Angle Extender ($35); Foot Strips ($5 per pair); and the Knee Pads ($25 per pair).

Products distributed by Theradapt Products Inc. (listed alphabetically)

1. AQUANAUT (MODEL 180-00)

   The Aquanaut, model 180-00, is a molded elevated toilet seat and back support designed for use by children who require extra support while toileting. This children's toilet seat supports children in a forward-leaning posture that promotes relaxation and helps them to function on the toilet. It has a contoured sitting surface which provides support for the hips and thighs and a child-sized opening which is narrower in front and wider in the back for ease in hygiene. The unit also includes a removable front trunk support with channeled arm troughs that encourage the child to hold the support, contoured back support that cues the child to flex forward, lateral trunk support, adjustable knee loops to prevent the user from sliding forward and to discourage knee extension, a toilet adaptor for installation on any toilet, and a bi-level footrest. INSTALLATION: Once the adaptor is installed on the toilet, the removable seat is attached to the toilet by tipping the base back and sliding it under the adaptor. The seat is then lowered and locked in position. OPTIONS: Removable soft hip pads (1.25-inch pads for children with hips between 9 and 12 inches, or 2.5-inch pads for children with hps up to 9 inches); wall bracket for storage; . COLOR: Teal with purple accents and footrest.

2. EXER-RIDER

   The Excer-Rider is a scooter board designed to provide therapeutic and recreational mobility for children with physical and neurological disabilities. This device consists of a seat platform with rollers and horseshoe-shaped handlebars. Almost impossible to tip, the unit is propelled by swinging the handlebars from side-to-side. This unit is also equipped with a back support and a seat belt. WARRANTY: A one year warranty.

3. KAYE POSTURE CONTROL WALKER & KAYE POSTUREREST WALKERS

   The Posture Control Walker is a child's walker designed for use by children 18 months of age through adolescence with mobility disabilities. Available in six sizes, these reverse walkers are designed to make walking less energy consuming and improve rhythm and timing. The walkers have folding anodized aluminum frames and most models are available with two wheeled front legs and two rear legs with crutch-style tips to create friction with the floor and slow walker speed, or with four wheels. The smaller walkers are available with a choice of a "B" or "J' frame style. The lighter weight J frame is available in the three smallest sizes only, is suitable for limited ambulation, and has two support bars behind the user. The B frame is slightly bulkier and heavier than the J frame to accommodate an older user and more vigorous ambulation; three support bars behind the user provide greater reinforcement. The H frame is designed for an older, taller, heavier user and is designed for use with four wheels. All styles provide support behind the child, requiring a more upright posture and placing the center of gravity within the walkers base of support. In all frame styles, the upper most bar strikes the hip extensors during single limb stance, facilitating extension on the weight-bearing side. The handgrips with flanged ends olace the child's arms and hands at his/her sides as he/she takes weight on the extended arms. The depth of the walkers prevent the hands from getting too far ahead of the body. As the child grows and develops, this configuration allows the elbows to be slightly behind the midline of the body, aiding thoracic extension and scapular adduction for straighter, more upright posture. The PostureRest Walker offers the same features as the Posture Control models plus a built-in seat that folds up when not in use. The PostureRest walker is available in most configurations. OPTIONS: Forearm supports, pelvic stabilizers, guide handles for small frame, all-terrain wheels, and leg extensions to convert to two-wheel, four-wheel, or four-wheel walkers with locking front swivel wheels. COLOR: The B and H frames have red handgrips and the J frame has blue grips. The smaller sizes are available with a choice of a blue or silver frame. The larger sizes and the H frame are available in silver only.

4. LADYBUG CORNER CHAIR

   The Ladybug Corner Chair is a corner seat designed for use by children three years old and under with neurological or mobility disabilities. This chair facilitates upright sitting and head control, offers support for straight-backed sitting, and helps protract the shoulders so that arms can come forward to function in midline. The seat back adjusts forward or backward along the seat base to enable the children to sit either in a long-leg or in a conventional sitting position. In addition, the seat back can be removed when the child is ready to learn independent sitting. This chair has a tubular steel frame with locking swivel casters and the seat is upholstered in padded vinyl. An H-strap harness, hip belt, abductor, and a removable tray aid in positioning. The chair's legs are independently height-adjustable to allow the seat to be inclined for children who are not ready for upright sitting. OPTIONS: A headrest is available. DIMENSIONS: The seat back is 12 inches high without the optional headreast and 16 inches high with the headrest. The seat width adjusts from 12 to 13 inches and the floor to seat height adjusts from 6 to 10 inches. The seat base is 13 x 19 inches and the tray is 13 x 11 inches. The casters are 2 inches in diameter. CAPACITY: 50 pounds. WEIGHT: 27 pounds. COLOR: Black frame with red upholstery.

5. SQUIGGLE WIGGLE WRITER

   The Squiggle Wiggle Writer is a weighted pen designed for use by children with upper extremity fine motor disabilities. This triangular, weighted pen is useful for developing pen and pencil grasp and the pen's vibration enhances kinesthetic awareness of the hand. Changing the angle and pressure varies the size and shape of the wiggles and squiggles the pen creates. The set includes the pen and four color cartridges. POWER: Uses one double-A battery (not included). OPTIONS: Neon color cartridge refills are available.

6. WENZELITE BARIATRIC ADULT SAFETY ROLLERS (MODELS CE 1000 XL & CE OBESE XL)

   The Wenzelite Bariatric Adult Safety Roller is a folding height-adjustable wheeled walker designed for use by large or obese people with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four easy-roll ball bearing four-inch wheels are standard. The front wheels swivel and the rear wheels are fixed. OPTIONS: Adjustable, rotating forearm platforms; platform mounting brackets; transverse handlebar for one-handed use; self-storing retractable seat; oxygen tank holder for D or E cylinders; IV pole; extended uprights for tall users; hook for catheter bag or purse; wire basket in steel frame; and replacement handgrips. DIMENSIONS: The height on both models is adjustable in one-inch increments and both models adjust from 29 to 36 inches high. The optional extended uprights increase the height range to 40 to 47 inches. Model CE 1000 XL is width-adjustable from 22.5 to 27.5 inches overall and from 17.5 to 22.5 inches between the handlebars. Model CE 1000 OBESE XL is width-adjustable from 25 to 30 inches overall and from 20 to 25 inches between the handlebars. CAPACITY: Model CE 1000XL, 400 pounds; model CE 1000 OBESE XL, 700 pounds. WARRANTY: Lifetime limited warranty.

7. WENZELITE HEAVY DUTY POSTERIOR SAFETY ROLLER (MODEL CE 1200)

   The Wenzelite Heavy Duty Posterior Safety Roller, model CE 1200, is a folding adjustable height, wheeled walker designed for use by individuals with mobility disabilities. This walker is designed to support the user from behind and requires an adjustment to a more upright position. FRAME: Square steel tubing with welded joints, handlebars, and a powder coat finish in a choice of black (standard) or burgundy (extra cost). BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four wheels. The front wheels change from swivel to non-swivel at the touch of a button. The rear wheels are one directional, but can be disengaged to allow full forward and reverse mobility. Four-inch wheels are standard. OPTIONS: Adjustable forearm platforms; vertical rotating, tilting handgrips; short platform mounting brackets; pelvic stabilizer; seat; oxygen tank holder; IV pole; ankle prompts; chest support; and replacement handgrips. DIMENSIONS (HxW): 29 to 36 x 26.5 inches overall and 21.5 inches wide between the handlebars. WARRANTY: Limited lifetime warranty.

8. WENZELITE MSS TILT AND RECLINE

   The MSS Tilt and Recline is a pediatric positioning seat designed to provide growth adjustments and optimum positioning for children with physical or neurological disabilities. FRAME: The chair is available with a high or low frame, can be converted to a floor sitter, and is offered in two sizes. SEAT (WxD): The seat is 9 x 5 to 14 inches on the small model and 10.5 x 5 to 14 inches on the medium model. The back height adjusts from 10 to 12.5 inches on the small model and from 12.5 to 16 inches on the medium model. The seat to footrest height adjusts from 5 to 10.5 inches on both models. The seat to floor height on both models is 13.5 inches as a floor sitter, 14 inches with the low frame, and 22.5 inches with the high frame. A removable headrest, pelvic strap, trunk harness, lateral supports, and abduction wedge are all standard.TILT AND RECLINE: The standard reclining backrest angle is 10 degrees on both models; optional recline is ranges from 80 to 140 degrees. The seat tilts in space up to 45 degrees. CUSHION: Washable cushions are included. ARMRESTS: The armrests are height- and angle-adjustable. A dining tray is also included. WHEELS: Four caster wheels provide mobility; the rear casters lock. FOOTRESTS: A height-adjustable footrest is standard and the footrest depth is 7.5 inches on both the small and medium models. OPTIONS: A Booster Kit that enables the seat insert to be removed from the frame and used as a booster seat on a standard chair or stroller while maintaining its positioning settings; vinyl trunk harness; a set of vinyl covers; and headrest wedges. WEIGHT: Both models weigh 28.6 pounds with accessories. CAPACITY: 75 pounds for the small model and 100 pounds for the medium model. WARRANTY: Two-year limited warranty.

9. WENZELITE PEDIATRIC ANTERIOR SAFETY ROLLER (MODELS PE 1000, PE 1000W, PE 1000 XL & TYKE)

   The Wenzelite Sure Footed Pediatric Anterior Safety Roller is a folding height-adjustable wheeled walker designed for use by children with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder coat finish in a choice of colors. The walker is also available in aluminum. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four easy-roll ball bearing four-inch wheels are standard. The front wheels swivel and the rear wheels are fixed. OPTIONS: Adjustable, rotating forearm platforms; short platform mounting brackets; oxygen tank holder for D or E cylinders; wire basket in steel frame; and replacement handgrips. DIMENSIONS: The height on all models is adjustable in one-inch increments. Model PE 1000 adjusts from 22 to 28 inches high, model PE 1000 XL and PE 1000W adjust from 23.5 to 29.5 inches high, and the TYKE model adjusts from 17 to 22 inches high. Model PE 1000 is 20 inches wide overall and 15.5 inches wide between the handlebars. Model PE 1000W is 22.5 inches wide overall and 17.5 inches wide between the handlebars. The TYKE model is 18 inches wide overall and 14 inches wide between the handlebars. Model PE 1000 XL adjusts from 22.5 to 27.5 inches wide overall and from 17.5 inches to 22.5 inches between the handlebars. WARRANTY: Limited lifetime warranty.

10. WENZELITE POSTERIOR SAFETY ROLLER (MODELS PE 1200 & TYKE 1200)

    The Wenzelite Posterior Safety Roller is a folding height-adjustable wheeled walker designed for use by children with mobility disabilities. This walker is designed to support the child from behind and requires the child to adjust to a more upright position. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four wheels. The front wheels change from swivel to non-swivel at the touch of a button. The rear wheels are one directional. OPTIONS: Adjustable forearm platforms; vertical rotating, tilting handgrips; short platform mounting brackets; pelvic stabilizer belt; seat harness; ankle prompts; chest support; and replacement handgrips. DIMENSIONS (HxW): Model PE 1200 is 22 to 28 x 23.5 inches overall and 16 inches wide between the handlebars. The TYKE model is 17 to 20 x 22 inches overall and 14.5 inches wide between the handlebars. WARRANTY: Limited lifetime warranty.

11. WENZELITE SURE FOOTED ADULT SAFETY ROLLER (MODEL CE 1000)

    The Wenzelite Sure Footed Adult Safety Roller is a folding adjustable height, wheeled walker designed for use by people with mobility disabilities. FRAME: Square steel tubing with welded joints, handlebars, and a powder-coat finish in a choice of colors. BRAKES: The breaking mechanism is activated by applying pressure to the handlebars. An optional Dial-A-Speed knob allows adjustable resistance on one or both rear wheels for greater speed control. WHEELS: Four easy-roll ball bearing four-inch wheels are standard. Five-inch wheels are optional and replacement wheels in both sizes are available. The two front wheels swivel and the rear wheels are fixed. OPTIONS: Adjustable, rotating forearm platforms; platform mounting brackets; transverse handlebar for one-handed use; self-storing retractable seat; oxygen tank holder for D or E cylinders; IV pole; extended uprights for tall users; hook for catheter bag or purse; wire basket in steel frame; and replacement handgrips. DIMENSIONS (WxH): Model CE 1000 is 22.5 x 29 to 36 inches. This model ia 17.5 inches wide between the handlebars. The height is adjustable in one-inch increments. The optional extended uprights increase the height range to 40 to 47 inches. Model CE 1000N is 20 inches wide overall and 15.5 inches wide between the handlebars. CAPACITY: Both models have a capacity of 400 pounds. WARRANTY: Limited lifetime warranty.

See Theradapt Products Inc. products that are no longer available.