TFH Special Needs Toys

4537 Gibsonia Road
Gibsonia, Pennsylvania 15044
United States
Telephone: 800-467-6222 or 724-444-6400.
Fax: 724-444-6411.
Web: http://www.tfhusa.com.
Email: info@tfhusa.com.

Products manufactured by TFH Special Needs Toys (listed alphabetically)

1. BACK SUPPORT WEDGE (MODEL 9FFSW)

   The Back Support Wedge, model 9FFSW, is a positioning wedge designed for use with children with neurological or severe physical disabilities. This covered foam wedge provides firm support at 45 degrees. DIMENSIONS (HxWxL): 12.5 x 24 x 12.5 inches.

2. BALL SWITCH (MODEL 3TSTM)

   The Ball Switch, model 3TSTM, is designed for use by individuals with severe physical or upper extremity disabilities.This switch features a large ball with a knobby surface attached to a long tube connected to the switch box. From the other side of the switch box comes a cord which coonects to the switch-adapted toy or appliance. When the ball is squeezed, the switch activates the device.

3. BEAN BAG BEDS (MODELS 9SBBB & 9JBBB)

   Bean Bag Beds are body positioners designed for use by children and adults with neurological or severe physical disabilities. Made of tough, wipe-clean vinyl, these positioners conform to the user's body shape. SIZES: Model 9SBBB is a Senior Bean Bag and model 9JBBB is a Junior Bean Bag. DIMENSIONS (HxLxW): Model 9SBBB is 25 x 215 x 78 centimeters and model 9JBBB is 25 x 120 x 60 centimeters.

4. BODY SUPPORT WEDGE (MODEL 9FFBW)

   The Body Support Wedge, model 9FFBW, is a positioning wedge designed for use with children with severe physical or neurological disabilities. This covered foam wedge provides full body support at 15 degrees. DIMENSIONS (HxWxL): 12.5 x 36 x 42 inches.

5. BOLSTER SWING (MODEL 8TBLS)

   The Bolster Swing, model 8TBLS, is designed for use by children with physical and neurological disabilities. This swing consists of a padded bolster covered with non-slip material with two connection points for ropes at each end. When two ropes are connected at each end, the swing provides a stable ride. With a single vertical connection at each end, greater balance is required of the user. The ropes are adjustable. The swing may be attached to a Rotating Suspension Unit (not included; see entry) or to a swing frame or ceiling joist using the included beam. DIMENSIONS: 37 inches long x 29 inches in diameter.. CAPACITY: 280 pounds.

6. CLOUD CUSHION (MODEL 9CLCL)

   The Cloud Cushion, model 9CLCL, is a body positioner designed for use with individuals with neurological or severe physical disabilities. Made from strong PVC vinyl, this inflatable cushion also contains a layer of foam. When properly inflated, this cushion conforms to the user's body shape. DIMENSIONS: 84 x 84 x 12 inches.

7. COLOR CHANGE SWITCH (MODEL 3TSPL)

   The Color Change Switch, model 3TSPL, is designed for use by individuals with severe physical or upper extremity disabilities. This plate switch has a large translucent plate that changes color each time it is tapped, providing visual reward and reinforcement each time the switch is activated. The switch base is equipped with suction cup feet to keep the switch in place. DIMENSIONS: 14 x 5.5 x 4 inches.

8. CORACLE SWINGS (STANDARD, DEEP WINDOW, & SHALLOW HEAVY DUTY)

   Coracle Swings are designed for use by children and adults with severe physical or neurological disabilities. These swings are designed to enable the user to lie or sit in them. Made of reinforced nylon material that conforms to the users body shape, the ends of the swings are padded and pull ropes enable the user to move the swing independently. The separate suspension ropes are adjustable so that the user's head may be raised. Three different models are available: The Standard Coracle, model 8TCCS; the Deep Window Coracle, model 8TCCSL, with plastic windows so the user may see out the sides; and the Shallow Heavy Duty Coracle, model 8TCCSH, with support at one end and ratcheted straps at the other so the user may be laid down and ratcheted up to assist a caregiver in positioning the user. DIMENSIONS (LxWxD): Standard Coracle is 50 x 20 x 12 inches, Deep Window Coracle is 57 x 20 x 15 inches, and the Shallow Heavy Duty Coracle is 57 x 20 x 6 inches. CAPACITY: All models have a capacity of 280 pounds. COLOR: Blue.

9. CORNER BALL POOL

   The Corner Ball Pool is a ball flotation therapy shape designed for use in soft play areas. This ball pool is designed to be used in conjunction with existing wall padding and so requires only two self-supporting walls. Both inner and outer walls (sold separately) are available. OPTIONS: Single ball pool step, set of four steps, ground sheet for ball pools, and sets of 1,000 balls. DIMENSIONS: The inner walls are 48 inches high. The outer walls are available in a choice of 36 inches high x 12 inches wide or 27 inches high x 10 inches wide.

10. DISC SWING (MODEL 8DISC)

    The Disc Swing, model 8DISC, is a rotational swing designed for use by children with physical and neurological disabilities. This swing consists of a large disc with a padded column in the center. The child sits on the disc with a leg on either side of the column which the child grasps while being swung. The suspension rope is adjustable and the disc is covered in padded non-slip material. The swing may be attached to a screw-in hook fitted in a ceiling joist or the top bar of a swing frame. DIMENSIONS: The disc is 50 centimeters in diameter and the column is 62 centimeters high. CAPACITY: 280 pounds.

11. DUBLUP (MODELS 9DLP1, 9DLP2, & 9DLP3)

    The Dublup is large geometric shapes designed for use with children with severe physical or neurological disabilities. Supplied in two sections, these foam-filled PVC shapes can be combined to create a variety of large shapes. SIZES: Size 1, model 9DLP1, is suitable for children up to four years of age. Size 2, model 9DLP2, is suitable for children from four to nine years of age. Size 3, model 9DLP3, is suitable for children nine years of age and older. DIMENSIONS (HxLxW): Size 1 is 10 x 48 x 15 inches. Size 2 is 14 x 60 x 21 inches. Size 3 is 15 x 96 x 50 inches.

12. DUBLUP BALLPOOL

    The Dublup Ballpool is ball flotation therapy designed for use with children with neurological, balance, or mobility disabilities. The Ballpool walls are created by joining two Dublup Size 1 shapes (see separate entry). The unit is then lined by attaching the included ball sack inside the walls with Velcro to complete the pool, which can then be filled with the included 800 balls. OPTIONS: An additional sack of balls is included. DIMENSIONS: The pool is 57 inches in diameter. COLOR: The balls come in red, yellow, and blue. One green ball is included for searching activities.

13. ECONOMY BALL POOL (MODEL 9BPEC)

    The Economy Ball Pool, model 9BPEC, is a ball flotation therapy unitdesigned for use with children with mobility, neurological, or balance disabilities. This unit consist of a padded metal frame with a vinyl liner. The unit has a 6,000 ball capacity (balls not included).OPTIONS: Single large ball pool step, ball nets, and sets of 1,000 balls. DIMENSIONS (HxLxW): 24 x 90 x 65 inches.

14. FLOOR SITTER (MODELS 7FLOSC & 7FLOSJ)

    The Foor Sitter is designed for use with children with balance, neurological, and physical disabilities. This lightweight, wipe clean plastic seat is designed to provide very firm back and lateral support and has an integrated gently molded pommel. SIZES: Child, model 7FLOSC, and junior, model FLOSJ. DIMENSIONS: The child's model accommodate 7 inch hips and is 9 inches from front to back. The back height is 7 inches. The junior model accommodates 10 inch hips and is 13 inches from front to back. The back height is 7 inches.

15. FOAM CHIPPING FILLED WEDGE (MODEL 9FFFW)

    The Foam Chipping Filled Wedge, model 9FFFW, is a positioning wedge designed for use with children with severe physical or neurological disabilities. Filled with foam chipping, this bean-bag style support provides full body support at 15 degrees. DIMENSIONS (HxWxL): 12.5 x 36 x 42 inches.

16. FOLDAWAY SWING FRAME (MODEL 8TLFS)

    The Foldaway Swing Frame, model 8TLFS, is hardware for therapeutic suspension equipment. This folding frame may be used indoors or outdoors and accommodates a single swinging item (not included). If a pull beam (not included) is required, it can be bolted directly to the center bracket. OPTIONS: Groundstay extensions for added stability. DIMENSIONS (HxWxD): 84 x 71 x 98 inches. CAPACITY: 224 pounds.

17. FREE STANDING BALL POOL

    The Free Standing Ball Pool is a ball flotation therapy square designed for use with children with mobility, neurological, or balance disabilities. To create a free-standing pool, four outer walls are required. OPTIONS: Single ball pool step, set of four steps, ground sheet for ball pools and set of 1,000 balls. DIMENSIONS: The walls are available in a choice of 36 inches high x 12 inches wide or 27 inches high x 10 inches wide.

18. GIANT PLAYING CARDS (MODEL 6PCGT)

    Giant Playing Cards, model 6PCGT, are low vision playing cards designed for use by individuals with low vision. These oversized cards have large pictures and are printed in large, easy-to-read type. DIMENSIONS: Each card is 8 x 5 inches.

19. HELTER SKELTER LOOPIE, SINGLE KNOT LOOPIE, OR SINGLE TWIST LOOPIE

    The Helter Skelter Loopie is a perceptual training activity designed for use with children with neurological disabilities. The unit consists of a tray base with an upright flat post in the center. Children drop the eight included balls into the hole at the top of the post and track them through the translucent tube curled around the post until the balls exit the hole at the bottom. The Single Knot Loopie has a translucent tube tied in a knot and attached to a flat base with a hole at each end. The user must twist and turn the unit to manipulate the five included balls from the start to the exit hole. The Single Loop Loopie is a simplified version of the Single Knot Loopie, enabling children to manipulate the three included balls from the start to the exit through a single translucent loop. DIMENSIONS (H x W x D): The Helter Skelter Loopie is 30 x 12 x 20 inches. The Single Knot Loopie is 12 x 10 x 9 inches. The Single Loop Loopie is 12 x 10 x 8 inches.

20. LARGE BINGO CARDS

    The Large Bingo Cards are a large print game designed for use by individuals with low vision. This set of 25 plastic-coated cards can be marked off with water-based or dry erase markers and the surface wipes clean. OPTIONS: Set of 10 dry erase markers. DIMENSIONS: 8.5 x 11 inches. COLOR: Bold black print on white cards.

21. LARGE INDEX PLAYING CARDS (MODEL 6PCLI)

    The Large Index Playing Cards, model 6PCLI, are low vision playing cards designed for use by individuals with low vision. These cards are the same size as standard playing cards, but are printed in large, easy-to-read type.

22. LARGE TOUCH PAD (MODEL 3TSTL)

    The Large Touch Pad, model 3TSTL, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. Pressing anywhere on the large top surface of this switch activates a connected switch-adapted toy or appliance. DIMENSIONS: 14 x 5.5 x 4 inches.

23. LEAF CHAIR (MODEL 8ROLC)

    The Leaf Chair, model 8ROLC, is a hammock suspension swing designed for use by individuals with emotional, cognitive, or neurological disabilities. This leaf-shaped chair has a strong, lightweight steel frame with a soft, padded liner in a washable material. The chair, which may be suspended from a stand or a suspension hook (not included), is balanced to provide gentle motion. OPTIONS: Standard stand, corner stand, cross beam ceiling support, suspension hook, and a spinner. DIMENSIONS: 65 inches long.

24. LOW PROFILE SWITCH (MODEL 3TSLP)

    The Low Profile Switch model 3TSLP, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This large surface switch has a low profile for easier use by individuals with limited range of motion and is operated by pressing on the surface. DIMENSIONS: 2.5 x 3 inches.

25. LOW VISION GIANT TOUCH DOMINOES (MODEL 6GDFTW)

    The Low Vision Giant Touch Dominoes, model 6GDFTW, are dominoes designed for use by individuals who are blind or have fine motor or grasping disabilities or low vision. The set includes 28 large wooden dominoes with raised dots. DIMENSIONS: Each domino is 4.25 x 2 x 0.25 inches. COLOR: Black dots on a white background.

26. MERCURY SWITCH (MODEL 3TSMV)

    The Mercury Switch, model 3TSMV, is designed for use by individuals with severe physical or upper extremity disabilities. Mounted on a band, this switch can be worn on the hand, wrist, arm, leg, or head, and the switch is activated by slight body movements.

27. NO NOISE SWITCH (MODEL 3NSSW)

    The No Noise Switch, model 3NSSW, is a control switch interface unit designed for use with individuals with emotional or cognitive disabilities. This switch activates the connected toy or appliance as a reward for quiet, encouraging those who shout or scream to modify behavior. This unit includes a microphone and a sensitivity control.

28. ON / OFF SWITCH (MODEL 3TONF)

    The On/Off Switch model 3TONF, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This large surface switch consists of two plates; tapping the left one turns the connected toy or appliance on and tapping the right one turns the item off. COLOR: The "on" side of the switch is green and the "off" side is red.

29. ONE HANDED EMBROIDERY FRAME (MODEL 4EMFR)

    The One Handed Embroidery Frame, model 4EMFR, is a clamp on needlework hoop designed for use by individuals with use of only one hand. This adjustable wooden hoop can be used for needlepoint, cross stitch, or crewel work and features an adjustable wooden clamp that secures it to the edge of a table.

30. PARACHUTE CANOPY (MODEL 8TNPC)

    The Parachute Canopy, model 8TNPC, is a parachute designed for group therapy and recreational activities. Made of reinforced heavy-duty nylon, this parachute comes with a storage/carrying bag. DIMENSIONS: 20 feet in diameter. COLOR: Multi-colored panels.

31. ROTATING SUSPENSION UNIT (MODEL 8SUSP)

    The Rotating Suspension Unit, model 8SUSP, is hardware for therapeutic suspension equipment. This unit may be fixed to a suspension hook or a swing frame (not included; see separate entries) and can be used with a Bolster Swing, Platform Swing, String Swing, or Swing Seats (not included; see entries) to provide both rotation and swinging. CAPACITY: 280 pounds.

32. RUGGED RADIO CASSETTE PLAYER

    The Rugged Radio/Cassette Player is an adapted radio and adapted cassette player designed for use by individuals with severe physical or upper extremity disabilities. The combination radio and cassette player are built in to a strong wooden box that can be clamped to a table. The box is equipped with a large, touch-sensitive switch; one tap turns the unit on and a second tap turns it off. DIMENSIONS: 13 x 9 x 12 inches.

33. SINGLE ADJUSTABLE TABLE (MODEL 7WHCS) & DOUBLE ADJUSTABLE TABLE (MODEL 7WHCD)

    The Single Adjustable Table, model 7WHCS, is an accessible table designed for use by people who use wheelchairs. This height-adjustable table has an open base, a torso cut-out to enable the user to position himself/herself close to the work area, and a raised rim on three sides to prevent items from tolling off. The Double Adjustable Table, model 7WHCD, is also height adjustable and features dual torso cut-outs to enable two wheelchair users to face each other while using the table. Raised rims on two sides prevent items from rolling off. DIMENSIONS: Both models adjust from 22 to 30 inches high.

34. SPINNER (MODEL 8TSPN)

    The Spinner, model 8TSPN, is hardware for therapeutic suspension equipment. This device attaches to a suspension hook (not included) or suspension point on a swing frame (not included) and allows equipment to be suspended from a single point and spun. OPTIONS: Easy Release Clip. CAPACITY: 280 pounds.

35. SQUISH SWITCH (MODEL 3TSSO)

    The Squish Switch, model 3TSSO, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. Shaped like a large pillbox, this cloth-covered, cushioned switch is activated by squeezing and applying pressure with the hands or the elbows.

36. STRING SWING (MODEL 8TNTS)

    The String Swing, model 8TNTS, is a hammock suspension swing designed for use by children with emotional, neurological, or physical disabilities. Made of soft terrylene string with no knots, this swing is suspended fro two sides, enabling the user to lie across it or to use it as an enveloping sack by sitting upright. DIMENSIONS (Wx L): 39 x 78 inches. The swing is suitable for suspension eight inches from the ground.

37. SUSPENSION HOOK (MODEL 8TSPH)

    The Suspension Hook, model 8TSPH, is hardware for therapeutic suspension equipment. This device enables a swing or Leaf Chair (see separate entry) to be suspended from a ceiling beam for indoor use. CAPACITY: 224 pounds.

38. SUSPENSION PLATFORM SWING (MODEL 8TPLS)

    The Suspension Platform Swing, model 8TPLS, is a suspension platform swing designed for use by children with physical and neurological disabilities. This swing is suspended from four corners for a flat ride. The suspension ropes are adjustable and the platform is covered in padded non-slip material. A beam is included which may be attached to a swing frame, a Rotating Suspension Unit (not included; see entry), or to a ceiling joist. DIMENSIONS (LxW): 36 x 24 inches. CAPACITY: 280 pounds.

39. SWING HAMMOCK (MODEL 7HMMK)

    The Swing Hammock, model 7HMMK, is a hammock suspension swing designed for use with children and adults with cognitive, neurological, or emotional disabilities. This soft, woven hammock can be suspended from a suspension hook or the stand for the Leaf Chair (see separate entry). DIMENSIONS: 36 inches wide.

40. TFH SWING SEATS

    The TFH Swing Seats are swing accesories for children or adults with physical or neurological disabilities. These swing seats are designed of high density polyehtylene plastic with a pommel, four straps, and a shoulder harness with snap buckles. The straps are adjustable, as is the rake of the seat. OPTIONS: Child seat liner, leg supports, head supports for the child and teenage models, waterproof seat covers, sun shade and replacement ropes. SIZES: Child, Teenage, and Adult. DIMENSIONS: Child model is 13 x 11 x 22 inches with a 3 x 1.5 inch pommel; Teenage model is 17 x 13 x 27 inches with a 3.1.5 inch pommel; and the Adult model is 4 x 2 inches.

41. TFH RESONANCE BEAN BAG (MODEL 9RSCB)

    The Resonance Bean Bag, model 9RSCB, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. Made of tough, wipe-clean vinyl, this chair features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. The chair molds to the contours of the user's body. COLOR: Choice of an assortment.

42. TFH RESONANCE CHAISE LOUNGE (MODEL 9RSCC)

    The Resonance Chaise Lounge, model 9RSCC, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. Made of tough, wipe-clean vinyl, this chaise features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. The head of the unit is slightly elevated and a U-shaped roll around three sides of the head section prevents users from rolling off. DIMENSIONS (LxW). 65 x 30 inches. COLOR: Choice of an assortment.

43. TFH RESONANCE CUSHION (MODEL 9RSCN)

    The Resonance Cushion, model 9RSCN, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. This cushion can be used in a standars chair or a wheelchair and features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. DIMENSIONS (HxWxD). 18 x 13 x 4 inches.

44. TYRE SWING SUSPENSION (MODEL 8TUBES)

    The Tyre Swing Suspension, model 8TUBES, is designed for use by children with physical and neurological disabilities. This two-strap unit may be attached to a swing frame or a ceiling suspension hook to suspend a tire innertube (not included) for use as a swing or a bouncer. OPTIONS: Inner tube. DIMENSIONS: The straps should be placed 18 inches apart on the inner tube. CAPACITY: 280 pounds.

45. WEDGE PLATE SWITCH (MODEL 3TSWP)

    The Wedge Plate Switch, model 3TSWP, is a touch switch designed for use by individuals with severe physical or upper extremity disabilities. This switch offers a switch latch mode and a timer mode and the extremely sensitive large surface requires merely a touch to activate and no physical pressure.

Products distributed by TFH Special Needs Toys (listed alphabetically)

1. BOUNCY BOARD

   The Bouncy Board is a balance training device designed to stimulate body awareness and teach balance through bouncing, walking, or jumping to children with physical or neurological disabilities. The board may be used by more than one person at a time. It features a plywood top on six heavt-duty springs with non-slip feet. DIMENSIONS: The surface is 23 x 63 inches and .5-inch thick. The springs are 4.75 inches high. CAPACITY: 160 pounds.

2. CLINICAL RECLINER

   The Clinical Recliner is a vibrotactile amplification system designed for use by individuals with cognitive, neurological, physical, or emotional disabilities. Used for positioning, calming, or stimulating, this chair features modern styling, a welded steel frame, and a patented gas spring recliner mechanism which enables the chair to recline to the Trendelenburg position. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear it for a full-body experience of sound and vibration. This device connects to most stereo systems with 10 to 100 watts of power. WARRANTY: One year warranty and a 30-day satisfaction guarantee.

3. LAUNCH PAD

   The Launch Pad is a balance training device designed for use by children with neurological or physical disabilities. The device consists of a triangular plywood top affixed to a heavy-duty spring lef at each corner. As the child moves or shifts weight, the effected spring compresses, requiring a shift in balance. DIMENSIONS: The plywood is .5 inch thick. Each side is 20 inches long. CAPACITY: 80 pounds.

4. RC BUMBLEBEE (MODEL 3SRCB)

   The RC Bumblebee, model 3SRCB, is a remote controlled toy designed for use by children with fine motor and severe physical disabilities. The toy's course alters each time its one-button remote control is pressed. POWER: The remote control requires two AAA batteries, and the bumblebee toy uses three AA batteries.

5. SOUNDBEAM (KIT A & KIT B)

   Soundbeam is a music synthesizer control system designed to allow people with physical or developmental disabilities to create music on any instrument operating with MIDI without physical contact by interrupting a stream of ultrasonic pulses. The Soundbeam master or remote sensor sends out an invisible stream of ultrasonic pulses; when the beam is interrupted, echoes bounce back to the master. Soundbeam detects the interruption, measures the length of time required for the pulse to meet the interruption, measures the length of time required for the echo to bounce back, interprets that information in terms of notes and pitches, and sends instructions for playing the notes to the musical instrument. The length of the beam can be adjusted, allowing both minute movements and sweeping gestures to be used. One set of movements in the beam of the Soundbeam Master creates one channel of information to be sent to one instrument. Up to three soundbeam units can be attached to the Soundbeam Master. Each unit can then interpret movement, creating up to four channels of information and allowing music to be created simultaneously on four electronic instruments or on one instrument capable of playing separate but simultaneous note or sound sequences. Ten selectable MIDI programs in three categories are supplied with the Soundbeam. Single Shot modes provide one note per break in the beam. Sustain modes allow chords to be built with successive beam breaks. Re-trigger modes allows movement within the broken beam to trigger adjacent notes. One re-trigger mode allows scales to be programmed via MIDI input, enabling the user to break the beam at various intervals to play pitches melodically without a keyboard controller. Soundbeam Kit A includes one transformer, one remote sensor, one boom stand, all necessary leads, a handbook, and a video. Kit B includes two each of the transformer, remote sensor, and boom stand, as well as all leads, one handbook, and one video. OPTIONS: Single Switch, Switcher 8, Soundbed, Soundbox, amplifier, MIDIMap software, additional manuals and videos, and a directory of Soundbeam users.

6. SPRING-A-LING

   The Spring-A-Ling is an eye hand coordination activity designed for use by children with physical and neurological disabilities. The device consists of a one-piece tubular track configured in springs, curves, and circles with a variety of large beads to be manipulated around the track.

See TFH Special Needs Toys products that are no longer available.