Freedom Factory

446 Winding Lane
Sparta, Tennessee 38583
United States
Telephone: 931-738-7547.
Fax: 931-738-7546.
Web: http://freedomfactory.org.
Email: freedomfact@blomand.net.

Products manufactured by Freedom Factory (listed alphabetically)

1. ADULT REVOLUTION PRO COMP & JUNIOR REVOLUTION PRO COMP

   The Adult Revolution Pro Comp and Junior Revolution Pro Comp are mono skis / sit skis designed for use by individuals with lower extremity disabilities or spinal cord injury. This mono ski has a flexible, form-fit polymer seat with a high or low back, mounted on a frame constructed of chrome moly steel, with an internal valving suspension. The retention system includes foot, knee, and thigh retention straps; waist and chest straps; a safety/retention strap; and a three-point evacuation system. The Junior model is three-quarters of the size of the adult model and is available with a choice of a copolymer or fiberglass seat. DIMENSIONS: The suspension system has eight inches of travel: The unloaded seat height above snow is approximately 16 inches; the loaded seat height above snow is 10 inches (skiing height); the minimum seat height at full shock compression is 8 inches. CAPACITY: The Junior model has a capacity of 120 pounds and the Adult model has a capacity of 220 pounds.

2. MOGUL MASTER

   The Mogul Master is a mono-ski with a bucket seat skier compartment for paraplegics, lower extremity amputees, and other individuals interested in sit-skiing. The Mogul Master was designed to give both the beginner and experienced mono-skier precise steering and fast reaction time for quick directional change and bump absorption. The fiberglass seat adjusts for height-above-snow variations and comes in three sizes. The chassis is made of Teflon-coated, hard anodized aluminum and stainless steel hardware for corrosion resistance. CHAIR-LIFT COMPATIBILITY: Self-loading, seat rises to 21 inches. SAFETY FEATURES: All models have a three-point evacuation system and safety, knee, waist, and chest straps. WEIGHT: 26 pounds.

3. RIDER BAR

   The Rider Bar is a support bar for a snowboard designed for individuals with balance and lower extremity disabilities. The Rider Bar includes two mounting plates that attach to a standard snowboard. The support bar is shaped like an inverted "U" and the ends attach to the mounting plates. The Rider Bar includes two sets of height adjustment tubes and a removable instructor bar that attaches to the top of the support bar. When not in use, the Rider Bar folds for storage or transport. OPTIONS: Tether clamp and tethers. DIMENSIONS: The height adjusts from 22 to 48 inches.

4. SNOW SLIDER

   The Snow Slider is a support frame for skiing for people with balance, lower extremity, mobility and walking disabilities. The user steps into the front of the frame, and horizontal foam padded forearm supports extend on both sides. The legs on each side attach to standard ski bindings and skis need to be attached to the bottom of the frame for use. Neither skis nor bindings are included. The skis can be angled inward up to 15 degrees to slow the user's speed if necessary. The user must also wear skis when using the frame. The forearm angle has unlimited adjustment options, and the width of the forearm support can be adjusted between 9 and 20 inches. The Snow Slider includes two sets of lower tubes - one sized for adults and one for children. With the adult tubes, the forearm height adjusts between 34 and 46 inches; with the child tubes, the height ranges from 22 to 34 inches. No tools are necessary to adjust the frame. OPTIONS: Tethers and clamps; knee belt; fanny (posterior) belt. WEIGHT: 14 pounds with skis.

See Freedom Factory products that are no longer available.