Invacare Canada570 Matheson Blvd. E., Unit 8
Mississauga, Ontario L4Z 4G4
Telephone: 800-668-5324 or 905-890-8300.
Fax: 800-668-5478 or 905-890-5244.
Discontinued products manufactured by Invacare Canada (listed alphabetically)
ADULT WALKER (MODEL AWA)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Adult wheeled walker, chrome plated tubular steel frame with horseshoe shaped padded tray or table top. Adjustable height 28 to 50 inches. Width at floor 21 inches, at top 21 1/2 inches overall depth at floor. 25 3/4 inches, at top 22 inches. Four 2 inch casters. No handgrips.
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lightweight manual drive wheelchair, folding four post lightweight frame construction to increase frame strength, eliminates need for seat guide and makes folding easier. Aluminum inner rails reduce weight and eliminates corrosion. Rear wheels are lightweight and narrow. Milled one piece aluminum hubs and high speed precision bearings. Choice of 4 axle positions, allowing camber to increase lateral stability and provide flexibility in wheel handling. Quick release axles on rear wheels. Choice of 4 front wheel styles: 8 inch solid tire, narrow or full pneumatic or 5 inch sports wheel. Five arm styles swinging detachable legrests. Wheel locks. Spoke or mag wheels. Seat with 14 to 18 inches in one inch increments. Seat depth 11 1/2, 13, 16, or 17 1/2 inches. Seat height 19 1/2 or 21 inches. Weight 43 pounds. Models: Adult, Tall Adult, Junior 13, Growing II Children. Sports package and accessories available.
CHILDS PARALLEL WALKER (MODEL PWA)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Childs walker, chrome plated tubular steel frame with welded joints, non-marking rubber tipped legs. Adjustable height 12 to 38 inches in one inch increments, adjustable width from 12 to 20 inches in one inch increments. Lengths 18 or 24 inches.
COMMODES (MODELS 1510 & 1515)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Commode, chrome plated tubular steel frame. Fixed full length detachable pivot arm model arm model which pivots out of the way or completely detaches as desired for access. Optional: detachable bed pan brackets and bedpan. Naugahyde upholstery, solid padded removable seat and padded armrests. 5 inch swivel casters with front locks. Open front toilet seat. Seat height 19 inches. Seat width 17 inches. Seat depth 16 inches. Overall length 20 inches. Back height 13 1/2 inches.
CPSC PRONE STANDER (MODELS PS-01 TO PS-03)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Prone stander for children, completely adjustable. Provides standing support, safety belts.
GLIDE ABOUTS (MODELS 2510 & 2515)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Wheeled chair, nonfolding, chrome plated tubular steel frame with 5 inch swivel casters. Leatherette upholstery. Available with fixed or detachable full length arms. Seat and armrests are padded. Seat width 17 inches. Seat depth 16 inches. Seat height 18 1/2 inches. Weight 24 pounds.
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Manual drive wheelchair, folding. Chrome plated steal frame. Seat width 16, 17 or 18 inches. Footrest styles: fixed, hook on, or elevating. Naugahyde upholstery, versa rim 24 inch rear drive wheels with non- marking gray rubber tires and sealed rear wheel bearings. 8 inch molded front casters with sealed double ball bearings. Folds to 9 7/8 inches. Weight 43 to 44 pounds.
POSTUREPAK POSTURAL SEATING SYSTEM
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Modular seating system, foam padded units with naugahyde upholstery. Fits any standard child wheelchair. Includes: Adjustable neck rest that adjusts vertically and horizontally, hinged contour padded back support with adjustable lumbar pad lateral support pads with height and 2 width positions, contour padded interior wedge seat with adjustable steel cross bar to adjust the height and depth of the seat, removable pommel for hip abduction, two adjustable seat belts for chest and waist. Custom features are available.
ROGUE CUSTOM BUILT SPORTSCHAIR
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Manual sport wheelchair, folding. Chrome plated steel frame. Available with or without brakes, with pneumatic tires or semi-treaded or slick tires, with sloped arms, wrap around arms or no arms. Single or double position quick release axles. Options: frame construction (standard, lightweight or heavy duty), multiple axle positions and wheel camber, caster socket location. Custom dimensions: seat height from floor, seat width and depth, back height. Back styles: straight or kinked backpost, push handles or no push handles, detachable push handles. Upholstery color optional. Choice of wheel sizes, arm rest styles, fixed or swinging detachable square lock footrests with pivot release, anti tipping casters, clamp on backpost, roll bar, brakes or leg strap.
SHOWER CHAIR (MODEL 1010)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Shower chair. Chrome plated tubular steel frame with 5 inch heavy duty swivel casters with 2 locks, fixed full length arms, solid open front toilet seat. Woven plastic mesh back upholstery, optional bed pan and bed pan bracket.
SOLO ELECTRIC CONVERSION UNIT (MODELS M3SP & M3SM)
--- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Add on power drive unit to convert manual wheelchair to powered wheelchair. Easily attaches to any wheelchair from adult to 12 inch juniors. Chair remains foldable with removal of battery carrying case. Drive assembly is gear driven with completely sealed four pole, permanent magnet motor and ball bearing box. Box is cast aluminum with sealed steel and cast iron gears. Solid state fully proportional electronics. All packages (battery, electronics and hand control boxes) are vacuum formed of grey high impact ABS plastic and are splash proof. Wheels easily disengaged for freewheeling operation. Range of about 6 hours on one charge. Unfolded width same as manual chair. Mark III High Speed: Top Speed 5 mph, climbs grades at least 1 foot in 7. Mark III Steep Climber: Top Speed 4 mph, climbs grades at least 1 foot in 4. 2 direct drive motors, 10 inch semi pneumatic treaded rear wheels, battery and case and battery charger, electronic and hand control boxes with solid state proportional speed controls and 1/2 speed governor, Pneumatic front casters and heel loops. Batteries not included. Options: Swing away joy stick adapter, Variable speed governor, Battery charger bracket, Black pneumatic rear tires and wheels, Quick change motor mounts. Total weight (added to weight of manual wheelchair) 49 1/ 2 pounds.
TARSYS 4XP TILT SYSTEM
--- DISCONTINUED. (Verified 5/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Tarsys 4XP Tilt System is a powered tilt system designed to provide a cost effective pressure relief and postural benefits for persons with neuro-muscular disabilities or spinal cord injuries. The system is compatible with most hemi, recliner, and shortwheel conventional chairs. With a 45 degree range of tilt, the system features low seat heights for accessibility to tables and desks, an optional relay control for interfacing with wheelchair switch options, and a centrally mounted battery tray that can be adjusted to alter the center of gravity for driveability and stability.
TARSYS TILT & RECLINE SYSTEMS
--- DISCONTINUED. (Verified 5/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Tarsys Tilt and Recline Systems are powered reclining and tilt systems designed to address the functional and physiological needs for persons with neuro-muscular disabilities and spinal cord injuries. The systems (models for P300, Arrow XT/4M/5M, Xcaliber) are designed to offer the greatest amount of pressure redistribution with full recline and 45 degrees of tilt. They are integrated with the wheelchair to provide low seat heights, maximum function and full compatibility. In the Recline mode, the systems are designed to provide a shear reduction system that allows the user to independently adapt to changes in posture and seating positions; in the Tilt mode, the system utilizes standard backposts, armrests and legrests for interfacing of modular or custom backrests and seating components; optional power elevating legrests can also be added to accomodate circulatory problems; these legrests are designed to be elevated in either a combined mode, an individual mode (left or right), or in an automatic sychronized fashion.
Discontinued products distributed by Invacare Canada (listed alphabetically)
--- DISCONTINUED. (Verified 01/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Aquatec Fortuna is a portable powered bath lift designed for use by children and adults with mobility disabilities. Available for standard and jacuzzi-style tubs, this lift can be customized to suit the user's needs and features a reclining backrest that reclines from 80 to 45 degrees and a floating hand-held controller. The unit includes latex-free cover mats and suction cups to secure the base to the tub. POWER: Uses a sealed lead acid battery with no memory (battery and charger are included). The battery supports multiple up and down cycles per charge, with the number depending on user weight. The lift safety feature does not permit the lift to lower if insufficient battery power remains to raise the lift. OPTIONS: Reclining lateral support backrest, headrest, pillow, wedge cushion, carrying bag set, and others. DIMENSIONS: The standard model seat is 18 inches deep x 15 inches wide and 28 inches wide with the flaps down. The seat on the jacuzzi model is 34 inches wide with the flaps down. The unit is 25 inches long. The standard back height is 25 inches and the width is 14 inches. The base is 11 inches wide and 21 inches long. The minimum lift height is 2.75 inches and the maximum height is 17 inches for the standard tub model and 19 inches for the jacuzzi model. CAPACITY: 300 pounds. WEIGHT: 33 pounds. COLOR: White or blue. WARRANTY: Three year limited warranty on lift parts and six months on the battery.