Comfort Company

509 South 22nd Ave
Bozeman, Montana 59718
United States
Telephone: 800-564-9248.
Fax: 406-522-8563.
Web: http://www.comfortcompany.com.
Email: sales@comfortcompany.com.

Products manufactured by Comfort Company (listed alphabetically)

1. COMFORTARM ARMREST

   The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swing-away unit rotates allowing the comfort arm to be angularly rotated side-to-side and adjusted front to back by 7-inches. The length of the unit prevents wrist and finger drop and the soft trough reduces skin breakdown. OPTIONS: Moldable options can be used to elevate fingers. DIMENSIONS: The unit is 22 inches long.

2. COMPLETE FEET

   Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.

3. COMPLETE FEET SINGLE FOOT

   The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.50 inches.

4. DURASOFT HALF TRAY

   The DuraSoft Half Tray is a swing-away lap tray designed for use as a wheelchair accessory by individuals with lower extremity or mobility disabilities or spinal cord injury. For those people who do not need the surface area that a full lap tray provides, the DuraSoft Half Tray provides a smaller surface on one side of the wheelchair. It is available in left- and right-handed models. The unit has a rigid insert covered by high resiliency foam with a solid cover. A raised outside edge keeps the user's arm positioned correctly. The unit swivels out of the way for transfers or inward over the user's lap for use as a table. An interlock bracket provides secure attachment to full length or desk length wheelchair armrests. The unit's Comfort-Tek exterior is fluid proof and washable. Its supple, leathery surface provides multi-dimensional stretch to helps alleviate pressure on bony prominences.

5. FLAT TOP LATERAL ROLL ARMREST

   The Flat Top Lateral Roll Armrest is an add-on armrest designed for use by individuals who use wheelchairs. This armrest fits over the existing armrest and the wide foam top provides comfort for the arm while discouraging lateral leaning. The design prevents spinning of the support around the armrest and prevents shoulder elevation. A low-profile model fits hemi wheelchairs and those that have less than three inches of clearance between the top of the finger guard and the bottom of the armrest. DIMENSIONS (WxL): The standard model is available in 5.5 x 16 inches, 7.5 x 10 inches, 5.5 x 16 inches, and 7.5 x 16 inches. The low profile model is available in 10 or 16 inches long.

6. HEAD STABILIZER

   The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, but is not moldable.

7. INCREDIBACK MOLDABLE RECLINING BACK SYSTEM

   The IncrediBack Moldable Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and can be molded to accommodate kyphosis, scoliosis, and other spinal curvatures. The supports can be remolded as the user's needs change. The unit attaches easily to most chairs, reclines up to 20 degrees, and folds with the wheelchair. SIZES: Standard and tall. DIMENSIONS (WxH): The standard model for 16-inch wheelchairs is 15 x 21 inches. The standard model for 18-inch chairs is 17 x 21 inches. The standard model for 20-inch chairs is 19 x 21 inches. The tall models are 15 x 34 inches, 17 x 34 inches, and 19 x 34 inches for 16-, 18-, and 20-inch chairs respectively. OPTIONS: Moldable Head Stabilizer (fits the tall models only; see separate entry).

8. INCREDIBACK RIGID RECLINING BACK SYSTEM

   The IncrediBack Rigid Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and is designed for use by individuals without spinal curvatures who require relief from forward or lateral leaning or who rquire additional comfort. The unit attaches easily to most chairs and reclines up to 20 degrees. The tall modesl include a moldable headrest above the rigid shell. SIZES: Standard and tall. DIMENSIONS (WxH): The standard model for 16-inch wheelchairs is 15 x 24 inches. The standard model for 18-inch chairs is 17 x 24 inches. The standard model for 20-inch chairs is 19 x 24 inches. The tall models are 15 x 34 inches, 17 x 34 inches, and 19 x 34 inches for 16-, 18-, and 20-inch chairs respectively. OPTIONS: Additional moldable Head Stabilizer (fits the tall models only; see separate entry).

9. SADDLE COMPLETE SEAT

   The Saddle Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat drop seat and a Saddle Cushion. The adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform.The cushion also features a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in position under the ischials for increased stability, reducing skin breakdown, heat buildup, and shear. The durable, pliable polyurethane bladder increases conformability and comfort. The built-in gel bladder resists moving and requires no kneading. Saddle geometry aids in positioning, pressure relief, and comfort. Contoured leg adductors and pommel increase seating area for better weight reduction. The tapered sides follow the natural leg angle and allign the legs and reduce hip rotation. DIMENSIONS: 16 x 16.5 inches or 18 x 18 inches. Built-in drop straps lower the seat up to 3 inches.

10. SADDLE CUSHION, THE

    The Saddle Cushions are foam, wedge foam, or foam and gel seat cushions designed for use in wheelchairs. Available with or without QuadraGel, these cushions are available in a wedge model that is lower in the back than in the front to prevent the user from sliding or thrusting forward, or in a Zero Elevation model that is the same height throughout. The cushions also feature rounded bottoms to prevent hammocking. The cushions have two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in position under the ischials for increased stability, reducing skin breakdown, heat buildup, and shear. The durable, pliable polyurethane bladder increases conformability and comfort. The built-in gel bladder resists moving and requires no kneading. Saddle geometry on all models aids in positioning, pressure relief, and comfort. Contoured leg adductors and pommel increase seating area for better weight reduction. The tapered sides follow the natural leg angle and allign the legs and reduce hip rotation. The cushions feature tapered sides to fit between wheelchair back canes, filling the gap between the sling seat and the back. An attached Kwik Strap loops around the anti-tip bars to secure the cushion. A staphCHEK Fusion Polyurethane Cover is included. DIMENSIONS: The wedge cushion drops 2.5 inches from the front to the back. The cushions are available in 16 x 16.5 inches or 18 x 18 inches.

11. SIDEHUGGER BACK CUSHION

    The SideHugger Back Cushion is a back support cushion designed for use by individuals with mobility disabilities. The cushion attaches directly to the existing wheelchair back and hugs the user when leaned against, encouraging the user to position him/herself using the built-in lateral supports. DIMENSIONS (WxH): Standard and tall models are available for 16-, 18-, and 20-inch chairs.

12. SIT 'N PLACE

    Sit 'N Place is a pelvic stabilizer designed for use by individuals who use wheelchairs. Available in a standard and a super model for added support, the unit is placed between the user's legs and a strap extends between the seat and back and down to the anti-tippers to secure the unit. The unit has a flat, comfortable contact surface and the adjustable length and tapered top keep the user upright and prevent sliding. The unit flips down and out of the way during transfers.

13. SMARTSEAT DROP SEAT

    The SmartSeat Drop Seat is a drop seat base designed for use in wheelchairs. This adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. DIMENSIONS: Models are available for 16-, 18-, and 20-inch wheelchairs. The seat can be lowered up to three inches.

14. SUPPORTPRO COMPLETE SEAT

    The SupportPro Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat Drop Seat with a SupportPro Cushion. The adjustable seat platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. A SupportPro cushion is integrated with the seat. Available with or without QuadraGel, this cushion features a linear design with the same height from front to back and a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in position under the ischials for increased stability, reducing skin breakdown, heat buildup, and shear. The durable, pliable polyurethane bladder increases conformability and comfort. The built-in gel bladder resists moving and requires no kneading. DIMENSIONS: 14 x 16 inches or 16 x 18 inches. The drop straps lowers the seat up to 3 inches.

15. SUPPORTPRO WEDGE CUSHION

    The SupportPro Wedge Cushion is a wedge foam or foam and gel seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion is lower in the back than in the front to prevent the user from sliding or thrusting forward. The cushion also features a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in position under the ischials for increased stability, reducing skin breakdown, heat buildup, and shear. The durable, pliable polyurethane bladder increases conformability and comfort. The built-in gel bladder resists moving and requires no kneading. The cushion features tapered sides to fit between wheelchair back canes, filling the gap between the sling seat and the back. An attached Kwik Strap loops around the anti-tip bars to secure the cushion. DIMENSIONS: The cushion drops 2.5 inches from the front to the back. The cushion is available in 16 x 16.5 inches or 18 x 18 inches.

16. SUPPORTPRO ZERO ELEVATION CUSHION

    The SupportPro Zero Elevation Cushion is a foam or foam and gel and foam seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion features a linear design with the same height from front to back and a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in position under the ischials for increased stability, reducing skin breakdown, heat buildup, and shear. The durable, pliable polyurethane bladder increases conformability and comfort. The built-in gel bladder resists moving and requires no kneading. The cushion features tapered sides to fit between wheelchair back canes, filling the gap between the sling seat and the back. An attached Kwik Strap loops around the anti-tip bars to secure the cushion. DIMENSIONS: 16 x 16.5 inches or 18 x 18 inches.