Allegro Medical Supplies Inc.
1833 West Main Street, Suite 131Mesa, Arizona 85201
United States
Telephone: 800-861-3211 or 480-990-8881.
Fax: 480-990-1666.
Web: http://www.allegromedical.com.
Email: afederico@allegromedical.com.
Products distributed by Allegro Medical Supplies Inc. (listed alphabetically)
-
ABLEWARE FOOD BUMPER
The Ableware Food Bumper is a food guard designed for use by individuals with upper extremity or neurological disabilities, stroke, cerebral palsy, or upper extremity amputation who want to use conventional tableware, but have difficulty getting food onto utensils and keeping food on the plate. These sanitary food bumpers clip onto any circular dinner plate 9 to 11 inches in diameter and provide walls against which food may be pushed onto forks or spoons. The plastic walls also prevent food from being pushed off the plate. Dishwasher and autoclave safe. DIMENSIONS (LxWxH): 9 x 5.75 x 1.125 inches. COLOR: Translucent or white. WARRANTY: 12 month warranty on parts and labor.
-
ABLEWARE TKO TURNING KNOB OPERATOR (MODEL H75310)
The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, including triangular knobs larger than itself. DIMENSIONS: The base is 2.25 inches in diameter. The T-shaped handle is 5.25 inches long.
-
ACCU-CHEK COMPACT PLUS METER SYSTEM
The Accu-Chek Compact Plus Meter System is a blood glucose analyzer designed for use by individuals with diabetes. Test strips for this blood glucose meter come pre-loaded with 17 strips in a cartridge (drum). Other features include a big glow-in the-dark screen; a detachable lancing device with 11 customizable depth settings for different skin types; 5-second results; and non-slip rubber grips. POWER: Uses triple-A batteries. DIMENSIONS (HxDxW): 4 x 1.2 x 2 inches. WEIGHT: 4.2 ounces with battery, lancing device, and test strip drum.
-
ALIMED INFLATABLE LAP BUDDY (MODEL 77338)
The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator bulb (included). The Inflatable Lap Buddy is seamless and washable. It fits wheelchairs with seats that are 16 or 18 inches wide. It deflates and folds for storage. DIMENSIONS (HxWxD): 3 x 27.5 x 9.5 inches.
-
BED CADDIE
The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.
-
BEDSIDE BEVERAGE HOLDER
The Bedside Beverage Holder is a cup, can, or bottle hoder designed to clamp onto bed rails. This unit features a flexible holder arm and an adjustable clamp. DIMENSIONS: The arm is 11 inches long and the clamp adjusts to fit rails from 0.75 to 1 inch in diameter.
-
BIOSOFT PALM GUARD GLOVES
The Biosoft Palm Guard Gloves are push gloves designed to protect the wearer's hands while propelling a wheelchair. These gloves feature an elastomer palm grip to absorb shock, vibration, and pressure. These pull-on fingerless gloves have an open-weave mesh back with adjustable Velcro closure. SIZES: Small, medium, large, and extra large.
-
CAR CADDIE
The Car Caddie is a car transfer aid designed for use by individuals with mobility disabilities. This figure-eight style aid is constructed of nylon and loops around the car door window frame. The cushioned grip provides security and assistance while entering and exiting the automobile.
-
CAREX ENABLERS JAR OPENER & CLOSER (MODEL EN17CRD)
The Carex Enablers Jar Opener & Closer, model EN17CRD, is a jar opener and tap turner designed for use by individuals with limited manual dexterity. The large round disk fits over jar lids or taps, while the pinwheel design in the surface helps secure the user's grip and concentrate hand strength while turning. DIMENSIONS (HxDxW): 4.75 x 1.25 x 4.75 inches.
-
CAREX MALE URINAL
The Carex Male Urinal is a male sheath urinal designed for use by men with mobility disabilities, severe physical disabilities, urinary incontinence, or spinal cord injury. Made of durable plastic, this urinal holds 1000 cubic centimeters with graduated marks to measure output. It is equipped with a cover and easy grip L-shaped handle and can be used in several positions while lying in bed. The unit can be washed with soap and water.
-
CLASSIC
The Classic is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is spin forged from 6061-T-6 polished billet aluminum, with mirror bright surfaces, sealed bearings, and Double walled rims. Hand rim options include quad projections and an anodized or vinyl surface. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 3.9 to 4.4 pounds. COLOR: Polished aluminum, gold, red, blue, purple, or black. Hand rims are aluminum or black. DELIVERY TIME: 4 to 6 weeks. WARRANTY: Limited 3 year warranty.
-
DAYTONA 3 (MODELS S35005 & S35006)
The Daytona 3 is a three-wheeled powered scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 44.4 x 22.5 inches. This scooter disassembles into three pieces for transport. The frame is available in red (model S35005) or blue (model S35006)and includes anti- tippers and a headlight. The scooter has a 40.2- degree turning radius, a climbing angle of 8 degrees, and ground clearance of 2.5 inches. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured height- and back-adjustable swivel seat. ARMRESTS: Flip-back adjustable-width arms. WHEELS: 8-inch solid tire in front and 10-inch solid tires in the rear. POWER: Uses two removable 36 AH batteries (included). SPEEDS: 5 miles per hour. CAPACITY: 300 pounds. WEIGHT: 165 pounds (112 pounds without batteries). WARRANTY: Lifetime warranty on power chair frame, two-year limited warranty on the electronic controller, one-year limited warranty on drive train components, and a six-month warranty on the batteries.
-
DICKSON PARAFFIN BATHS (MODELS K, S, H & D2)
The Dickson Paraffin Baths are designed to provide paraffin therapy to the hands, wrists, and feet in home and office settings. The baths are made of stainless steel treatment tanks of heavy gauge to resist the corrosiveness of paraffin and perspiration with contoured hard wood mouldings finished with epoxy resin. The treatment heat circuits have a maximum variation of plus or minus 2 degrees Fahrenheit to effect the fastest possible formation of the paraffin glove. High-heat circuits provide rapid melting of paraffin and sufficient heat for daily sterilization. timed melting or sterilized hi-heat temperature circuits rapidly raise the bath to sterilizing temperature. After an unattended hour of hi-heat, the bath automatically returns to treatment temperature. Integrated heating elements provide an even heat flow with no dangerous hot spots. Heated drains provide regular flow and prohibit congealing when paraffin is removed from the tank. Model K is a hand and foot bath; model D2 is designed as a foot and ankle bath. POWER: Model K uses 60 watts on treatment temperature circuit and 520 watts on elting/sterilizing circuit; model D2 requires 150 watts and 1200 watts, respectively. Both run on 120 volts AC, 50/60 Hz standard; 220 volts optional ($87). Model S requires 200 watts, 115 volts AC. Model H uses 450 watts, 115 volts AC. DIMENSIONS (LxWxD): Model K (no. PB-101) is 14 x 7 x 9.5 inches with an approximate 22-pound paraffin capacity. Model S (nos. PB101 and PB-107) is 12 x 6 x 6 inches and holds 6 pounds of paraffin. Model H (no. PB-102) is 14 x 7 x 9.5 inches and holds 20 pounds of paraffin. Model D2 is 16 x 16 x 16 inches with an approximate 80-pound paraffin capacity. WARRANTY: Guaranteed for one year against mechanical or electrical defects.
-
DOVER ROB-NEL URETHRAL CATHETER
The Dover Rob Nel Urethral Catheter is an internal urinary catheter designed for use by males with spinal cord injury. This latex-free intermittent catheter is made of a thermosensitive polyvinyl chloride (PVC) material with a smooth rounded tip, integral tapered funnel and two staggered eyes. The catheter is radiopaque and visualized in X-ray pictures. SIZES: French sizes 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30. DIMENSIONS: 16 inches long.
-
DYSPHAGIA CUP
The Dysphagia Cup is a cup with a large handle designed for use by individuals with upper extremity and swallowing disabilities. This lightweight cup features an extended handle that accommodates gripping with the entire hand or with the thumb only. The design of the cup promotes tucking the chin toward the chest which allows time for the normal swallowing mechanisms to work. The design also helps prevent liquids from escaping at the lips and directs liquids to the center of the mouth. Nose clearance enables the cup to be emptied without tilting the head back. The cup is latex free and dishwasher safe up to 180-degress Fahrenheit. COLOR: Green and almond.
-
EMERGENCY CALLER (MODEL EC-1)
The Emergency Caller, model EC-1, is an emergency alert system designed for use by seniors or individuals with physical disabilities. This system includes a waterproof transmitter which can be worn around the neck or carried in a pocket and a base unit which dials up to four telephone, pager, or cell phone numbers when activated. If a busy signal is encountered, the system automatically skips to the next number and will continually try up to three calls per number until the call is answered. Upon answering, a pre-recorded help message is played. The unit then enables the called party to "listen in" to the caller and initiate two-way conversation. To prepare for operation, the unit is plugged into a standard phone jack, the telephone numbers are programmed, and voice message is recorded. POWER: Uses standard household power; the battery back-up keeps the unit fully operational without loss of memory for up to four hours.
-
EVA ELITE MANUAL ADJUSTABLE SUPPORT WALKER & EVA ELITE MANUAL ADJUSTABLE WALKER WITH HAND BRAKES
The EVA Elite Manual Adjustable Support Walker and EVA Elite Manual Adjustable Support Walker with Hand Brakes are height-adjustable wheeled walkers designed for use by individuals with balance, lower extremity, or walking disabilities. The walker and its padded armrests support the user's weight when exercising. The walker can be used by post-operative patients when early walking exercise is indicated. The padded, molded arm-panels are washable and have a sculpted forearm cutout to keep the arms from sliding off the pads. The walker has a welded steel frame with a baked epoxy enamel finish, a single point of height adjustment at the forward vertical post, handgrips, and non-marring casters. The walker is available either with rear wheel locks with no hand brakes or with hand brakes without rear wheel locks. DIMENSIONS: Height adjusts from 36 to 48 inches. The outside base width is 26 inches and the inside base width at point of entry is 23.25 inches, flared to 19 inches at the front of the base. The base length is 27 inches. The inside arm width adjusts from 12 to 20 inches. The adjustable padded arm is (LxW) 17.5 x 6.5 inches. OPTIONS: Basket; IV pole with mounting bracket; portable E & D oxygen tank holder; a pair of extra arm-panels; and directional casters.
-
EVA YOUTH WALKER
The EVA Youth Walker is child's height- adjustable walker with armrests designed for use by children with lower extremity or walking disabilities. The walker has a welded tubular steel frame with a baked epoxy finish. The height is manually adjustable and the handgrips are round and face forward to provide an ergonomic grip. The large armrest pads can be removed for cleaning. Two casters are equipped with step-on brakes. DIMENSIONS (HxLxW): 23 to 36 x 27.5 x 25.25 inches. The width between armrests adjusts from 11 to 19 inches. The diameter of the casters is 3 7/8 inches. OPTIONS: Available with hand brakes instead of step-on locking brakes.
-
EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1)
The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides is 42 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds. WARRANTY: 1-year limited warranty.
-
FEMINAL FEMALE URINAL
The Feminal Female Urinal is a female urinal designed for use by women with mobility or severe physical disabilities or spinal cord injury. With this urinal a woman can urinate in a reclined, seated, or standing position. When the urinal is gently pressed against the body, its shape creates a leak-proof seal.
-
FISHING POLE HOLDER FOR WHEELCHAIRS
The Fishing Pole Holder is a fishing rod holder designed for use by individuals who have use of only one hand or who use wheelchairs. This clamp-on holder features a rigid PVC tube that secures the fishing rod handle while a slot in the handle supports the reel and keeps it from moving as the fish is reeled in. Attachment is accomplished with a clamp with a large screw and a large wing nut which enables the holder to be secured to any tubular wheelchair bar from 7/8 to 1 1/8 inches in diameter or to lawn chairs or beach chairs. DIMENSIONS: The tube is 1.6 inches in diameter and 6 inches long.
-
FLASHLIGHT AND ATTACHMENT (MODEL FL-1000)
The Flashlight and Attachment, model FL-1000, is a cane, walker and wheelchair light designed for use by individuals who use walkers, canes, and wheelchairs. The light attaches to any tube product with a diameter of .875 to 1 inch. It comes with a wrist strap and a clip that pivots 360 degrees to change the direction of the light. The light can also be detached from the clip for use as a flashlight. This light can also be used with bicycles and baby strollers. No tools are required for attachment. POWER: Requires 3 AAA batteries. DIMENSIONS (HxL): Flashlight only: 1.5 x 3.75 inches. Flashlight with clip: (HxLxD): 2.5 x 3.75 x 2.5 inches. The wrist strap is 6.25 inches long. COLOR: Black.
-
GO-GO ULTRA 3 WHEEL SCOOTER
The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. The seat is a compact, foldable molded foam seat. The seat-to- ground height is 18.75 to 19.75 inches and the back height is 12.75 inches. UPHOLSTERY: Black vinyl. WHEELS: The front tire is 2 x 7.5 inches; the rear tires are 3 x 7.5 inches. POWER: Uses two deep cycle AGM or Gel Cell batteries (size 12 AH). An off-board battery charger is included. SPEEDS: 4 miles per hour. CAPACITY: 250 pounds. WEIGHT: 92 pounds.
-
HEALTHSMART GATEWAY ROLLATOR
The HealthSmart Gateway Rollator is a folding wheeled walker with seat designed for use by individuals with lower extremity, balance, or walking disabilities or arthritis. This rollator has a lightweight aluminum frame, an over-sized padded backrest, loop lock brakes, and flared handgrips. The seat has an easy-pull nylon strap to help fold the rollator. This rollator includes a hook-and-loop cane holder and a nylon storage tote with shoulder strap. DIMENSIONS: The rollator is 30 inches long x 25 inches wide. Folded, the unit is 25 x 16.5 x 11.5 inches. The seat (WxD) is 18 x 10 inches. The seat height is 21 inches from the floor. The handle height adjusts from 31 to 36 inches in 1-inch increments. The width inside the handgrips is 18 inches, and the width outside handgrips 23 inches (add 4 inches to each side to determine if it will fit through doorway). The back rest is 4.5 inches high. The front wheels are 8 x 2 inches and the back wheels are 7 x 2 inches. The carrying bag is 15.5 inches wide x 12 inches high x 4 inches deep. CAPACITY: 300 pounds. WEIGHT: 16 pounds. COLOR: Black, purple, or titanium.
-
HEELBO HEEL AND ELBOW PROTECTOR (MODELS 12037, 12038, 12039, 12040, & 12041)
The Heelbo Heel and Elbow Protector, models 12037, 12038, 12039, 12040, 12041, is a leg protector designed for use to prevent pressure sores on heels, elbows, and knees. This stocking-style protector helps reduce shear and friction to the user's heels and elbows while allowing skin to breathe. The protectors have a flexible stretch weave. A sewn-in contoured foam pad prevents rolling and binding. The protectors are machine washable and retain their shape after repeated use. Protectors are sold in cases of 12. SIZES: Five color coded sizes include Small for limb circumference up to 16 inches (12037, yellow); Medium for limb circumference up to 17 inches (12038, blue); Large for limb circumference up to 19 inches (12039, white); X-Large for limb circumference up to 23 inches (12040, green); and XX-Large for limb circumference up to 25 inches (12041, beige).
-
INVACARE VENTURE HOMEFILL II
The Invacare Venture HomeFill II is a portable oxygen system designed for use by individuals with respiratory disabilities. This system enables users to fill portable high-pressure oxygen cylinders at home, eliminating the need for deliveries. Unlimited portable oxygen cylinders may be filled repeatedly and last up to five hours at two liters per minute (LPM) equivalent flow. Cylinders may be worn over the shoulder or around the waist and have built-in regulators and conserving devices. OPTIONS: Stand. WEIGHT: Cylinders weigh less than 5 pounds.
-
LAMP SWITCH EXTENSION LEVER (MODEL 6386)
The Lamp Switch Extension Lever, model 6386, is a knob turner for use on table lamps by persons with grasping disabilities. The lever has three spokes and can be operated from any direction. It fits most lamp threads. Latex free.
-
LEVER EXTENDER
The Lever Extender is an extension handle for a recliner designed for use by individuals with upper extemity or balance disabilities. Made of heavy-duty padded steel, this handle attaches with four bolts to the existing handle used to raise the footrest of a recliner. DIMENSIONS (LxW): 9 X 7 inches. WEIGHT: 2 pounds.
-
LMA DELUXE STEPPER WITH HANDLE (MODEL H4100)
The LMA Deluxe Stepper with Handle, model H4100, is a leg exerciser designed for use by individuals with lower extremity or balance disabilities or arthritis. This compact stepper can be used for low impact aerobic exercise for the whole body. The unit has two plates on which the user stands during stepping exercise while grasping the handle. The machine has an adjustable tension pulley system with dual hydraulic cylinders that work independently. A built-in digital computer controls the speed based on the user's pace. POWER: Uses batteries (included).
-
LMA HEAVY DUTY TRANSPORT CHAIR (MODEL LMA-102)
The LMA Heavy Duty Transport Chair, model LMA-102, is a transport wheelchair designed for use by individuals with arthritis or mobility or lower extremity disabilities. FRAME: Overall width is 26 inches or 28 inches for the super heavy-duty model. SEAT (LxW): 19 x 20 inches for the standard model or 19 x 22 for the super heavy-duty model. Seat height from the floor is 19 inches. WHEELS: Solid front and rear wheels with heavy duty forks. 12-inch rear wheels are standard; 24-inch rear wheels are available. FOOTRESTS: Swing-away footrests with large footplates are included. CAPACITY: 425 pounds on the standard model and 450 pounds for the super heavy-duty model. WEIGHT: 46 pounds without footrests (47 pounds for super heavy duty model).
-
LMA MINI TRAVELER SPORTY (MODEL MT-300)
The LMA Mini Traveler Sporty, model MT-300, is a scooter designed for use by individuals with arthritis or neurological, lower extremity, or mobility disabilities. FRAME (LxW): 35 x 21 1/8 inches. The turning radius is 33 inches. A basket is included. The frame is available in red, blue, or yellow. SEAT (LxW): 16 x 16 inches. Seat height from ground is 21 inches. BRAKES: Electric braking system. WHEELS: 7-inch foam filled tires. POWER: Includes battery and onboard battery charger. SPEEDS: 3.5 miles per hour.WEIGHT: 79 pounds.
-
LMA MINI TRAVELER SUPREME 2 (MODEL MT-120)
The LMA Mini Traveler Supreme 2, model MT-120, is a scooter designed for use by individuals with arthritis or lower extremity or mobility disabilities. FRAME: One-piece red or yellow frame with expandable leg room. CONTROLS: Fully programmable controller. RWD: Rear-wheel drive. UPHOLSTERY: Black. ARMRESTS: Included. WHEELS: Three wheels with flat-free tires. POWER: Uses battery (included) with onboard charger. SPEEDS: 4 miles per hour maximum speed. CAPACITY: 250 pounds.
-
LMA RALLY LITE ROLLING WALKER (MODEL 729)
The LMA Rally Lite Rolling Walker, model 729, is an adjustable-height three-wheeled walker designed for use by individuals with arthritis or lower extremity or mobility disabilities. This walker includes a wheel lock with handlebar controls. DIMENSIONS (HxW): 29.5 to 39.5 x 26 inches. WEIGHT: 8 pounds. CAPACITY: 250 pounds. COLORS: Red, green, champagne, purple, laser red, or laser blue. WARRANTY: 10 years.
-
LMA RALLY ROLLING WALKER (MODEL 717)
The LMA Rally Rolling Walker, model 717, is an adjustable height three-wheel walker designed for use by individuals with arthritis or lower extremity or mobility disabilities. This adjustable-height walker has handlebar wheel lock controls. DIMENSIONS (HxW): 29.5 to 39.5 x 26 inches. WEIGHT: 12 pounds. CAPACITY: 250 pounds. COLORS: Chrome or blue. WARRANTY: 10 years.
-
LMA REGAL HEAVY DUTY ROLLING WALKER (MODEL 850)
The LMA Regal Heavy Duty Rolling Walker, model 850, is a heavy-duty, height-adjustable wheeled walker with seat designed for use by individuals with arthritis, lower extremity disabilities, or walking disabilities. OPTIONS: Folding Basket. DIMENSIONS(DxWxH): The seat is 15 x 25 x 21 inches. The walker height adjusts from 34 to 40 inches. The wheel are 8 inches in diameter. WEIGHT: 30 pounds. CAPACITY: 400 pounds. COLORS: Red or blue.
-
LMA ROVER ROLLING WALKER (MODEL 805)
The LMA Rover Rolling Walker, model 805, is an adjustable-height four-wheeled walker with seat designed for use by individuals with arthritis or lower extremity or mobility disabilities. DIMENSIONS (HxW): 32 to 36 x 22.75 inches. The wheels are 5 inches in diameter and the seat height from the floor is 22.5 inches. WEIGHT: 11 pounds. CAPACITY: 250 pounds. COLORS: Red or green.
-
LMA ROYAL DLX ROLLING WALKER (MODEL 812)
The LMA Royal DLX Rolling Walker, model 812, is an adjustable-height four-wheeled walker with seat designed for use by individuals with arthritis or lower extremity or mobility disabilities. The walker has wheel locks with handlebar controls. DIMENSIONS (HxW): 31 to 36 x 24 inches. The seat is (LxWxH)13 x 17 x 21 inches. The wheels are 8 inches in diameter. WEIGHT: 11 pounds. CAPACITY: 250 pounds. COLORS: Red, green, laser blue, or champagne.
-
LMA ROYAL PETITE ROLLING WALKER (MODEL 809)
The LMA Royal Petite Rolling Walker, model 809, is an adjustable-height four-wheeled walker with seat designed for use by individuals with arthritis or lower extremity or mobility disabilities. This wheeled walker has height-adjustable handles and wheel locks with handlebar controls. DIMENSIONS (HxW): 30 to 34 x 24 inches. The wheels are 6 inches in diameter. The seat is(LxWxH) are 12 x 14 x 18 inches. WEIGHT: 9 pounds. COLORS: Red or champagne.
-
LMA ROYAL ROLLING WALKER (MODEL 807)
The LMA Royal Rolling Walker, model 807, is an adjustable folding wheeled walker with seat designed for use by individuals with arthritis, lower extremity disabilities, or walking disabilities. This four-wheeled walker features a seat and adjustable handle height. DIMENSIONS: The height adjusts from 31 to 36 inches and the overall width is 24 inches. The seat is 13 inches long x 17 incheswide x 21 inches hiigh. The wheels are 6 inches in diameter. WEIGHT: 9 pounds. CAPACITY: 250 pounds. COLOR: Red, green, champagne, Laser red, or laser blue.
-
NATURAL MALE EXTERNAL CATHETER
The Natural Male External Catheter is a non-adhesive external catheter designed for use by males with urinary incontinence, spinal cord injury, or severe physical disabilities. This clear silicone catheter is held in place with an adjustable strap to reduce skin irritation for users who change external catheters several times a day for intermittent catheterization. The odorless catheter is latex-free to prevent latex-related allergic reaction. Catheters come in a box with 30 catheters and 3 reusable straps. OPTIONS: Straps are available separately in boxes of 10. SIZES: Small, medium, intermediate, and large. DIMENSIONS: Diameter is 25 millimeters (small), 29 millimeters (medium), 32 millimeters (intermediate), 36 millimeters (large).
-
NEXCARE OPTICLUDE ORTHOPTIC EYE PATCH (MODELS 1537 & 1539)
The Nexcare Opticlude Orthoptic Eye Patch is an eye patch designed for use by individuals who are blind or have low vision or temporary visual disabilities. This patch can be used in vision-occlusive therapy. The patches are lightweight and oval-shaped with an adhesive border. SIZES: Junior (model 1537) or adult (model 1539). DIMENSIONS (HxW): The junior model is 1 x 2.5 inches; the adult model is 2.25 x 3.25 inches. COLOR: Beige.
-
OFFSET ADJUSTABLE ALUMINUM CANE (MODELS MP-21031, MP-21032, MP-21033, MP-10910, MP-10911, MP-10912, MP-10922, MP-10930, MP-10931, MP-21005, MP-21006, MP-21007, MP-21161, MP-21163, MP-21164, MP-21165, MP-21166, MP-21167, & MP-21168)
The Offset Adjustable Aluminum Cane is a height-adjustable cane designed for use by individuals with balance, mobility, or walking disabilities. The cane has a hypalon grip, a rubber tip, a wrist strap, a push-button height-adjustment mechanism, and a safety locking silencer. DIMENSIONS: The height is adjustable from 31 to 40 inches in one-inch increments. The replacement rubber tip size is 18 millimeters. WEIGHT: 0.8 pounds. CAPACITY: 250 pounds. COLORS: Solid colors include black (model MP-21031); bronze (model MP-21032); and silver (model MP-21033). Painted designs include celestial (model MP-10910); Canterbury (model MP-10911); summer garden (model MP-10912); leopard (MP-10922); Bingo (model MP-10930); Casino (model MP-10931); paisley (model MP-21005); compass rose (model MP-21006); butterfly (model MP-21007); red hat (model MP-21161); cats (model MP-21162); blue peacock (model MP-21163); camoflage (model MP-21164); green paisley (model MP-21165); flower garden (model MP-21166); abstract (model MP-21167); and red marble (model MP-21168).
-
PEDDLE MASTER
The Peddle Master is a hand control for a vehicle's accelerator and brakes designed for use by individuals with mobility and neurological disabilities or lower extremity disabilities or amputation. The controls can be installed in cars, trucks, or vans, and they are intended to allow the user to control the operation of the accelerator and brake pedal in a vehicle with automatic transmission and power brakes. This device can be installed and removed while seated in the driver’s seat without the need of tools. The portability of the Peddle Master allows it to be clamped onto accelerators and brakes of different cars. COLORS: Black, blue or red. WARRANTY: 3-year full warranty.
-
PERI-WASH II
Peri-Wash II is a no-rinse soap designed for use by individuals who are unable to bathe conventionally. The spray-on cleanser contains no dyes or perfumes, is medicated and aniseptic, moisturizes, and controls odor. SIZES: This product is available in 4-ounce ($2.56) or 8-ounce ($4.09) pump spray bottles.
-
PERSONAL CATHETER
The Personal Catheter is an internal catheter designed for intermittent use by individuals with urinary incontinence, severe physical disabilities, or spinal cord injury. This latex-free silicone catheter comes in four configurations (standard, antibacterial, hydrophilic, and antibacterial hydro) and in male, female, and pediatric lengths. The catheter has a firm silicone inner layer for ease of insertion and a soft silicone outer layer that is gentle on sensitive urethral tissue. The silicone polymers provide a smooth, non-stick surface. The catheter's four drainage eyes are small to help the catheter pass smoothly over sensitive urethral tissue, and offset to help maximize drainage. The catheter returns to its original straight shape even when stored in a looped position. OPTIONS: Tray with pre-connected catheter and insertion supplies, including a 16-inch long, 14 French unit size cathether; a waterproof absorbent underpad; one pair of latex-free pre-cuffed gloves; a fenestrated drape; 3 PVP swabs; sterile lubricating jelly; and a specimen container with lid and label. SIZES: 10 to 18 French units (male or female); 8 or 10 French units (pediatric boys). DIMENSIONS: 16 inches long (male), 10 inches long (pediatric boys), or 6 inches long (female).
-
PHANTOM (MODELS S35001 & S35002)
The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back, adjustable-width arms. WHEELS: Three 8-inch flat-free tires. POWER: Uses two 12-volt rechargeable batteries (included). These wireless batteries can be removed for charging apart from the scooter. SPEEDS: 4 miles per hour with a range of 15 miles. CAPACITY: 300 pounds. WEIGHT: 84 pounds (63 without battery). WARRANTY: Lifetime warranty on power chair frame, two-year limited warranty on electronic controller, one-year limited warranty on drive train components, and a six-month warranty from date of installation on battery.
-
POLLY POWER GRIP
The Polly Power Grip is a grasping aid for hand designed for use by individuals with arthritis and other grasping disabilities. This lightweight tool has vise-like jaws that adjust to varying widths and that close by squeezing the handles and open by pulling the handles apart. This device aids in providing a firmer grip with more power for pushing, pulling, picking up, turning, squeezing, or holding. This tool can be used to turn keys; open bottles, tubes, small jars, medicine bottles (including childproof caps); pull electrical plugs; pull weeds; remove pen caps; and, turn knobs and faucets. This device also aids in opening and closing zippers or blinds, pulling on gloves or socks, squeezing toothpaste tubes or clothes pins, or handling small items such as pins, needles, paper clips, and coins. Two Power Grips (sold separately) can be used to accomplish two-handed tasks.
-
POP-ON MALE EXTERNAL CATHETER
The Pop-On Male External Catheter is a self-adhesive external catheter designed for use by men with urinary incontinence, mobility disabilities, or spinal cord injury. For use with a short or retracted penis, this silicone catheter has a shorter sheath with the same adhesive area as a standard male external catheter of normal length. Catheters are clear and odorless, and come individually packaged in boxes of 30 or 100. SIZES: Small, medium, intermediate, large, extra large. DIMENSIONS: 1.5 inch long sheath with diameter of 25 millimeters (small), 29 millimeters (medium), 32 millimeters (intermediate), 36 millimeters (large), or 41 millimeters (extra-large).
-
RALLY
The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control box mounted on a height- and angle-adjustable tiller. Forward and reverse is controlled by pressing levers mounted on the tiller. An on/off key is included. Custom controls are available. RWD: Rear wheel drive with a 24-volt direct current (DC) one-piece transaxle. SEAT (WxDxH): 18 x 17 x 13 inches. The seat height adjusts from 13.5 to 15.5 inches. The removable, swiveling seat has a folding back. Custom seat dimensions are optional. UPHOLSTERY: Choice of gray padded vinyl or fabric upholstery. ARMRESTS: Flip-up, width-adjustable armrests. BRAKES: Electronic brakes. WHEELS: The rear wheels are 3 x 9 inches and the front wheel is 2 x 8 inches and all wheels have pneumatic tires. Flat free tires are optional. OPTIONS: Safety flag, headlight, taillights, oxygen holder, crutch holders, and others. POWER: Uses two 12-volt sealed lead acid batteries (not included). The battery charger is built in and a battery charge gauge and charger outlet are located on the control box. SPEEDS: Maximum forward speed is 4.25 mile per hour and reverse speed is 2.5 miles per hour for a range of 12 to 15 miles per battery charge. An electronic speed control is included on the control box. CAPACITY: 250 pounds. WEIGHT: The rear section weighs 39 pounds, the seat weighs 23 pounds, and the front section weighs 20 pounds WARRANTY: Three year limited warranty.
-
REIZEN BRAILLE LABELER (MODEL RL-350)
The Reizen Braille Labeler, model RL-350, is a handheld braille labeler designed for use by individuals who are blind or deaf blind or have low vision. Made of durable plastic, this lightweight, portable braille labeler embosses braille onto adhesive plastic labeling tape for use in labeling items such as files, records, DVDs, credit cards, business cards, etc. DIMENSIONS (HxLxW) 2.38 x 10 x 4 inches. This unit uses 1/8- or 0.5-inch wide labeling tape (not included).
-
REIZEN CLEAR VINYL LABELING TAPE (MODEL 2030176)
Reizen Clear Vinyl Labeling Tape, model 2030176, is braille labeling tape designed for use by individuals who are blind or have low vision. The transparent tape has adhesive backing to attach to household items. It can be brailled using a 3M Braille labeler, Dymo Braille labeler, or Braille slate. Tape comes in packages of 3 rolls. DIMENSIONS (LxW): Each roll is 144 x 0.5 inches. COLOR: Clear.
-
REIZEN CLEAR VINYL LABELING TAPE (MODEL 2030180)
Reizen Clear Vinyl Labeling Tape, model 2030180, is braille labeling tape designed for use by individuals who are blind or have low vision. This transparent vinyl tape has adhesive backing to enable placement of braille lables on most objects. Tape comes in packages of 3 rolls. DIMENSIONS: 0.375 inches wide.
-
REIZEN TALKING ALARM CLOCK
The Reizen Talking Alarm Clock is a voice output digital alarm clock designed for use by individuals who are blind or have low vision. The time is spoken in a female voice with high or low volume when a button is pressed, or announcements can be made automatically on the hour. The time is also shown on a digital LED display. The clock has three alarm sounds - rooster, steady beeps, or cuckoo. It has a large snooze, light and talk button and a speaker on top. A user’s manual is included. POWER: Uses two AA batteries (not included). DIMENSIONS: Display is 0.75 inches high. WEIGHT: 1 pound. COLOR: Silver body and black or silver side panels with a soft green backlit display. WARRANTY: One-year warranty against material defects.
-
ROBERTS BOOK HOLDER
The Roberts Book Holder is a bookholder designed for use by individuals with upper extremity disabilities. Available in plastic or designer lucite, this unit holds books, newspapers, magazines, or individual sheets of paper at a comfortable angle for reading. The unit consists of a base with 10 roles of holes, a book support and a set of pegs. The pegs are placed in the appropriate holes to accommodate the width and thickness of the material; the pegs keep the book in position and prevent unwanted flipping of the pages while allowing for ease in turning pages. OPTIONS: Packages of two additional pegs. DIMENSIONS: Folds to 7.5 x 14 x 7/16 inches for transport and storage. COLOR: The plastic model is grey and the lucite model is clear.
-
SANI-PANT LITE MOISTURE-PROOF COVER-UPS WITH BREATHABLE PANEL (MODEL 855)
The Sani-Pant Lite Moisture Proof Cover-Ups with Breathable Panel, model 855, are incontinence pants designed for use by individuals with urinary incontinence. These pull-on briefs are made of plastic-coated nylon with a breathable 100-percent cotton panel, and are designed to hold absorbent pads, panties or diapers. One brief per package. SIZES: Small (for 22 to 28 inch waist), medium (for 30 to 36 inch waist), large (for 38 to 44 inch waist), extra large (for 46 to 52 inch waist). COLOR: White.
-
SCOLIOMETER (MODEL 5055)
The Scoliometer, model 5055, is designed for use by physical therapists and other medical professionals to measure curvature of the spine. It measures six areas to detect scoliosis, and provides three measurements to detect abnormal anteropostero curves. It can be used to evaluate progress during treatment, without X-rays. It also measures the unstable lumbosacral curve as well as the cervical and thoracic curves. The device is calibrated in centimeters, millimeters, and degrees. It is latex-free and comes with instructions.
-
SHOPRIDER SPRINTER XL3 DELUXE (MODEL 778XL)
The Shoprider Sprinter XL3 Deluxe, model 778XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable Delta-style tiller. RWD: Rear-wheel drive. SEAT (WxDxH): 22 x 18 x 23 to 27 inches. The back height is 19 inches. The padded, deluxecaptain's seat has a headrest. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: The two rear drive wheels have 12-inch tires. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses two 12-volt batteries. SPEEDS: 5.7 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 500 pounds. WEIGHT: The base weighs 190 pounds without batteries. The batteries weigh 23 pounds each. The seat weighs 34 pounds.
-
SHOPRIDER SPRINTER XL4 (MODEL 889-4)
The Shoprider Sprinter XL4, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for transport. The scooter is available in red. CONTROLS: Controls are mounted on an adjustable tiller. RWD: Rear-wheel drive. SEAT: The padded, rotating and sliding captain's seat has a headrest. The seat height adjusts from 24 to 26 inches. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: Four wheels with 12-inch tires. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 5 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 350 pounds. WEIGHT: 132 pounds without batteries. The heaviest part when disassembled weighs 50 pounds. The seat weighs 24 pounds.
-
SHOPRIDER SPRINTER XL4 DELUXE (MODEL 889XL)
The Shoprider Sprinter XL4 Deluxe, model 889-XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable Delta-style tiller. RWD: Rear-wheel drive. SEAT (WxDxH): 22 x 18 x 23 to 27 inches. The back height is 19 inches. The padded, deluxecaptain's seat has a headrest. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes with an emergency handbrake. WHEELS: The two rear drive wheels have 12-inch tires. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses two 12-volt batteries. SPEEDS: 5.7 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 500 pounds. WEIGHT: The base weighs 205 pounds without batteries. The batteries weigh 23 pounds each. The seat weighs 34 pounds.
-
SHOPRIDER SUNRUNNER (MODEL 777-3 /4)
The Sunrunner, model 777-3/4, is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a front black mesh basket. FRAME (LxWxH): The overall dimensions are 43 to 46 x 22 x 35 inches. The wheelbase is 34 x 18 inches with a ground clearance of 3 inches. The turning radius is 40 inches. The frame disassembles for transport. The scooter is available in burgundy or blue (with five-position tiller) or scratch-resistant yellow (single-position tiller). CONTROLS: Controls are mounted on a tiller. The burgundy and blue units have a five-position adjustable tiller, while the yellow model has a single-position tiller. RWD: Rear-wheel drive. SEAT: The scooter is equipped with a padded, sliding, swivel Fish-On style seat. The seat height adjusts from 20 to 23 inches. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: This scooter comes in a three- or four-wheeled model with dual articulating front wheels, mag wheels, and flat-free tires. OPTIONS: Sun shade, rear view mirror, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 0 to 5 miles per hour with a travel range of up to 15 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 250 pounds. WEIGHT: 110 pounds without batteries and 130 pounds with batteries. The heaviest part when disassembled weighs 40 pounds. The seat weighs 20 pounds.
-
SINGLE FOLD RAMP WITH CARRY BAG (MODELS STDS1093, STDS1094, STDS1095, STDS1096, & STDS1097)
The Single Fold Ramp with Carry Bag, models STDS1093, STDS1094, STDS1095, STDS1096 and STDS1097, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp enables the user to transition a wheelchair or scooter from one surface height to another. The unit is durable and lightweight , and it comes with a carry bag. Perforated slots keep water from collecting on the ramp. OPTIONS: Additional carrying bag. DIMENSIONS (LxW): 24 x 30 inches (model STDS1093); 36 x 30 inches (STDS1094); 48 x 30 inches (STDS1095); 60 x 30 inches (STDS1096); or 72 x 30 inches (STDS1097 ). CAPACITY: 600 pounds. WARRANTY: Limited lifetime warranty.
-
SMART GLOVE
The Smart Glove is a wrist support designed for use by individuals with upper extremity disabilities, arthritis, carpal tunnel syndrome, tendonitis, or other wrist and hand pain. This orthosis holds the hand and wrist in a neutral position while allowing full use of the hand. It is made of washable, latex-free cotton Lycra and provides flexible support for full use of the hand. An ergoBeads pad, located on the underside of the orthosis, cushions and protects the wrist. The orthosis is reversible to fit the left or right hand. SIZES: Extra small, small, medium, or large.
-
SNORE-NO-MORE PILLOW
The Snore-No-More Pillow is an anti-snoring pillow designed to prevent snoring by supporting the user's posture during sleep. This pillow positions the head and neck in a sleeping posture that helps reduce blockage of breathing passages. The pillow helps keep the chin elevated off the chest when the user is sleeping on his or her back so the airway is open and snoring is less likely. When the user is sleeping on one side, the curved roll of the pillow fits under the neck to help keep the jaw forward, the head steady, and the neck from kinking. The pillow is made from hypo-allergenic foam.
-
SOFT TOUCH TUFFET LEG REST
The Soft Touch Tuffet Leg Rest is a footstool designed for use by individuals with lower extremity disabilities or who use wheelchairs. This soft plastic footstool rocks to the most comfortable position or inverts for use as a standard footstool and it fits between the swing-away legrests of most standard wheelchairs. An air valve releases air from within to adjust firmness. DIMENSIONS: 20 x 15 x 15 inches. WEIGHT: 6.5 pounds.
-
SOVEREIGN (MODELS 888-3ES & 888-4ES)
The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance of 3 inches. The turning radius is 50 inches. The frame on both models disassembles for transport. CONTROLS: Controls are mounted on an adjustable tiller on both models. RWD: Both models are rear-wheel drive with full suspension. SEAT: The padded, sliding swivel deluxe captain's seats have headrests. Both models are also equipped with electric seat lifts and manual recline capability. The seat height adjusts from 21 to 23 inches on model 888-3ES and from 22 to 24 inches on model 888-4ES. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: Model 888-3ES is a three-wheeled model, with the front wheel comprised of dual articulating wheels. Model 888-4ES is a four-wheeled model. OPTIONS: Sun shade, rear view mirror, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 0 to 5 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees for both models. CAPACITY: 300 pounds. WEIGHT: Both models weigh 110 pounds without batteries. The heaviest part when disassembled on model 888-3ES weighs 41 pounds and 42 pounds on model 888-4ES. The seat weighs 34 pounds on both models.
-
SOVEREIGN (MODELS 888B-3 & 888B-4)
The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888B-4 are 48.5 x 21.5 x 38 to 28 inches with a ground clearance of 3 inches. The turning radius is 50 inches. The frame on both models disassembles for transport. Both models come in burgundy or blue. CONTROLS: Controls are mounted on a tiller on both models. RWD: Both models are rear-wheel drive. SEAT: The padded captain's seats have headrests. Model 888B-4 has sliding seat rails. The seat height adjusts from 21 to 23 inches on model 888B-3 and from 22 to 24 inches on model 888B-4. ARMRESTS: Adjustable flip-up armrests on model 888B-3 and flip-up armrests on model 888B-4. BRAKES: Electronic brakes. WHEELS: Model 888B-3 is a three-wheeled model. Model 888B-4 is a four-wheeled model. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 0 to 5 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees for both models. CAPACITY: 300 pounds. WEIGHT: Model 888B-3 weighs 110 pounds without batteries and model 888B-4 weighs 130 pounds without batteries. The heaviest part when disassembled on model 888B-3 weighs 41 pounds and 42 pounds on model 888B-4. The seat weighs 24 pounds on both models.
-
STANDARD ALL-SILICONE 2-WAY & 3-WAY FOLEY CATHETERS
Standard All-Silicone 2-Way and 3-Way Foley Catheters are internal catheters designed for use by adults or children with urinary incontinence, spinal cord injury, or severe physical disabilities. These catheters are made from a clear silicone material that enables visualization of drainage, and are latex-free for users with latex allergies. The non-stick silicone surface helps minimize encrustation. Catheters have a large drainage lumen with a smooth integrated balloon to hold the catheter in place. Three-way catheters have a separate channel for irrigating the bladder. SIZES: 6 through 26 French units (2-way) or 16 through 26 French units (3-way).
-
TADI TALKING VOICE ORGANIZER
The TADI Talking Voice Organizer is a voice output electronic organizer dsesigned for use by individuals who are blind or have low vision. This organizer has an alphanumeric QWERTY keypad with voiced feedback for every action and raised guide points for sight-free data entry. It can hold more than 900 phonebook contacts and five hours of digital recording. Features include a talking calculator, clock, notepad, diary, phone dialer, address book, reminders, and tutorials. One touch provides direct access to name, phone number, message record/playback, searching, recording, listening, copy, paste, and speech. Other features include a password for privacy, adjustable volume and contrast, and an earphone jack for private listening. POWER: Uses 3 triple-A batteries or adapter (included). The unit is equipped with a low battery signal. OPTIONS: Leather case; computer interface. DIMENSIONS (HxLxW): 3.75 x 5.875 x 0.5 inches. WARRANTY: One year manufacturer's warranty.
-
THERABEAD NECK PAIN RELIEF (MODEL 616-4505-0000)
TheraBeads Neck Pain Relief, model 616-4505-0000, is a heat therapy system and thermal wrap designed for use to relieve neck pain. The wrap can be heated in a microwave to provide moist heat therapy. It conforms to the user's neck or shoulder area for a soft, snug fit, and is adjustable with hook and loop closure to help prevent slippage. The wrap includes a machine washable cover. It is latex free. DIMENSIONS: 6.5 x 22 inches. COLOR: White cover.
-
THERABEADS JOINT PAIN RELIEF (MODEL 616-4504-0000)
TheraBeads Joint Pain Relief, model 616-4504-0000, is a heat therapy pad designed for use by individuals with arthritis. This microwaveable pad provides moist heat therapy for small areas. It includes a machine washable cover and is latex free. DIMENSIONS: 5 x 12 inches. COLOR: Cover is white.
-
THERABEADS MOIST HEAT MITT (MODEL 616-4508-0000)
The TheraBeads Moist Heat Mitt, model 616-4508-0000, is a hand warmer and heat therapy mitten designed for use by individuals with carpal tunnel syndrome or arthritis. Heated in a microwave, this mitt provides moist heat therapy to help relieve pain and stiffness. The mitt fits either the right or left hand and is latex free. DIMENSIONS: 8 x 12 inches.
-
THERABEADS NECK REST (MODEL 616-4512-0000)
The TheraBeads Neck Rest, model 616-4512-0000, is a heat therapy pad designed for use by individuals with arthritis or other neck pain. The unit is contoured to cradle the neck and shoulder area. It is heated in a microwave to provide moist heat therapy. The moist heat pad includes a machine washable cover and is latex free. DIMENSIONS: 13 x 10 inches. COLOR: White cover.
-
THERABEADS STANDARD PACK (MODEL 616-4503-0000)
The TheraBeads Standard Pack, model 616-4503-0000, is a heat therapy pad designed for use to releve pain in the shoulders, back, or knee. This product is heated in a microwave and applied directly to a selected area of the body to provide moist heat therapy. This pad includes a machine washable cover and is latex free. DIMENSIONS: 9 x 12 inches. COLOR: White cover.
-
THERABEADS WRAP SYSTEM (MODEL 616-4511-0000)
The TheraBeads Wrap System, model 616-4511-0000, is a heat therapy system and thermal wrap designed for use to relieve lower back pain. The system consists of an elastic wrap with an adjustable hook and loop fastener with a pouch that holds a moist heat pack over the lumbar area. The heat pack is microwaveable and includes a machine washable cover. The system is latex free. DIMENSIONS (WxL): Heat pack is 5 x 12 inches; elastic wrap is 6 x 38 to 55 inches. COLOR: White cover.
-
THERMOPHORE AUTOMATIC MOIST HEAT PACK UNITS (MODELS 055, 056, 074, & 077)
Thermophore automatic heat packs provide moist heat treatment for temporary relief from pain and discomfort. These pads come in four sizes and can be used to treat every area of the body. The pads are made with a specially woven flannel cover that retains moisture from the air. Replacement flannel covers are available. The unit produces 180 degrees of heat. DIMENSIONS: 055 Standard is 14 x 27 inches, 056 Medium is 14 x 14 inches, and 077 Petite is 4 x 17 inches. WEIGHT: Shipping weight of 2 to 5 pounds.
-
TOOTHETTE PLUS ORAL SWAB
Toothette Plus Oral Swabs are oral hygiene aids designed for use by individuals who have difficulty brushing their teeth. Each disposable swab has a long plastic handle with a ridged foam tip. The ridges gently lift and remove debris and mucus from the oral cavity, stimulate oral tissue, and help clean between teeth. Swabs are available with sodium bicarbonate or untreated. COLOR: Tips are green.
-
TOP END TERMINATOR EVERYDAY WHEELCHAIR
The Top End Terminator Everyday Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height, and front frame angle. Options include curved or square rear frame, tapered or V front frame, rear suspension system, Frog Legs suspension forks, anti-tip bars and bolt-on push handles. SEAT (LxW): 14 to 18 x 12 to 18 inches. Custom sizes in one-half inch increments are available. The Front floor-to-seat height is 17 to 21 inches and the rear floor-to-seat height is 14.5 to 21 inches. Seat heights are also available in custom dimensions in one-half inch increments. A fixed or adjustable back is available. Fixed or folding aluminum sideguards or removable sideguards are available as options. UPHOLSTERY: Adjustable tension upholstery. ARMRESTS: Optional padded T or tubular swingaway armrests. BRAKES: High or low. CASTERS: 4-, 5- or 6-inch semi-pneumatic casters are standard. Softroll aluminum casters are optional. WHEELS: 22-, 24-, 25-, or 26-inch wheels with high pressure clincher tires are standard. The chair has a fixed or adjustable camber system with camber of 0 degrees, 3 degrees, 6 degrees, 9 degrees, 12 degrees. Options include knobby tires, no-flat tires, and titanium hand rims. FOOTRESTS: One- piece tubular footrest or one-piece adjustable angle footrest is standard. A 4-inch adjustable height carbon fiber or plastic footrest coveris optional. CAPACITY: 250 pounds. WEIGHT: 20 pounds including wheels for a 16 x 16 inch chair equipped with minimal options. WARRANTY: Lifetime warranty on frame, one year on parts.
-
TOP END TERMINATOR TITANIUM WHEELCHAIR
The Top End-Terminator Titanium Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height and front frame angle. Options include curved or square rear frame, tapered or V front frame, a rear suspension system, anti-tip bars, and bolt-on push handles. SEAT (LxW): 14 to 18 x 12 to 18 inches. Custom sizes are availble in half-inch increments. The front floor-to-seat height is 17 to 21 inches. The rear floor-to-seat height is 14.5 to 21 inches; custom dimensions in half- inch increments are available. The back available as fixed or adjustable. Fixed or folding aluminum sideguards and removable sideguardsare optional. UPHOLSTERY: Adjustable tension upholstery. ARMRESTS: Optional padded T or tubular swing-away armrests. BRAKES: High or low. CASTERS: 4-, 5- or 6-inch semi-pneumatic casters. Softroll aluminum casters and Frog Legs suspension forks (see separate entry) are optional. WHEELS: 22-, 24-, 25-, or 26-inch wheels with high-pressure clincher tires and fixed or adjustable camber system with camber of 0, 3, 6, 9, or 12 degrees. Options available include knobby tires, no-flat tires, and titanium hand rims. FOOTRESTS: One-piece tubular footrest or one-piece adjustable-angle footrest, with optional 4-inch adjustable-height carbon fiber or plastic footrest cover. CAPACITY: 400 pounds. WEIGHT: 20 pounds including wheels for a 16 x 16 inch chair equipped with minimal options. WARRANTY: Lifetime warranty on frame and a one-year warranty on parts.
-
TOUCH TRONIC LAMP CONVERTER (MODEL 3425)
The Light Touch, model 3425, is a touch light converter designed to turn a standard lamp into a touch lamp. The converter screws into the socket and when metal on the lamp or shade is touched, the lamp is turned on or off or the brightness level is adjusted. With the converter, standard bulbs act as three-way bulbs.
-
TRUEREAD BLOOD GLUCOSE MONIORING SYSTEM
The TRUEread Blood Glucose Monitoring System is a glucose analyzer designed for use by individuals with diabetes. The unit automatically turns on when a test strip is inserted and provides results in 10 seconds. Results are displayed on aliquid crystal display (LCD) screen. The unit uses a one-microliter sample. The unit has a 200-test memory with uploading capability. WARRANTY: Lifetime.
-
ULTRAFLEX MALE EXTERNAL CATHETER
The UltraFlex Male External Catheter is a self-adhesive external catheter designed for use by males with urinary incontinence, spinal cord injury, or severe physical disabilities. This all-silicone catheter is latex-free to prevent latex-related allergic reaction and skin irritation. The catheter is clear and odorless with a built-in adhesive band. Catheters come individually packaged in boxes of 30 or 100. SIZES: Small, medium, intermediate, large, extra large. DIMENSIONS: Diameter is 25 millimeters (small), 29 millimeters (medium), 32 millimeters (intermediate), 36 millimeters (large), or 41 millimeters (extra large).
-
UNDER-TOE WASHER
The Under-Toe Washer is a long handled sponge designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury or arthritis or anyone having trouble bending or reaching either foot. The device consists of a stick with a soft built-up handle on one end and a sponge on the other end. The sponge fits between the toes, and it can be removed and replaced. Replacement sponges are sold separately. DIMENSIONS: The entire washer is 25 inches long. The sponge (LxWxD) is 1.5 x 1.5 x 1.5 inches.
-
UNIVERSAL HAND CLIP
The Universal Hand Clip is a grasping aid for the hand designed for use by individuals with limited hand strength, arthritis or other graspings or upper extremity disabilities. This spring action hand clip fits securely against the hand and attaches to objects with strips of heavy-duty hook and loop material. It can be used on phones, cups, bottles, hair brushes and other similar items. DIMENSIONS (LxWxD): 8 x 4 x 1 inches.
-
VORTEX
The Vortex is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is CNC precision machined from aircraft quality aluminum billet. It has 3 spoke design, and each spoke has a 3-circle design so that the wheel resembles an automobile's steering wheel. DIMENSIONS: 24- or 25-inch diameter. The width is 1 inch. CAPACITY: 250 pounds. WEIGHT: 3.4 pounds. COLOR: Hub and rim are polished aluminum. Spokes are anodized gold, red, blue, purple, or black. Hand rim is black. DELIVERY TIME: 4 to 6 weeks. WARRANTY: Limited 3 year warranty.
-
WIDEBAND MALE EXTERNAL CATHETER
The WideBand Male External Catheter is a self-adhering external catheter designed for use by men with mobility disabilities, spinal cord injury, or urinary incontinence. This clear silicone catheter has a 3-inch wide adhesive area that begins just behind the glans. This forward placement of the adhesive is designed to help prevent premature removal. Catheters are odorless and come individually packaged in boxes of 30 or 100. SIZES: Small, medium, intermediate, large, extra large. DIMENSIONS: Diameter is 25 millimeters (small), 29 millimeters (medium), 32 millimeters (intermediate), 36 millimeters (large), 41 millimeters (extra large).
-
WINSFORD FEEDER WITH CASE (MODEL 124601)
The Windsford Feeder With Case, model 124601, is powered feeder designed to enable people with upper extremity disabilities to feed themselves at their own speed. A slight head motion on the chin switch activates the motorized pusher that fills the spoon, which automatically moves to the mouth. Controlled rotation of the plate selects food for each mouthful. A bowl may be substituted for the plate by removing the plate and pusher and adding the turntable, shelf, and drip pan. A separate knob adjusts the Feeder height. The Feeder includes a carrying case, spoon, Corelle plate, bowl, chin switch, glass holder, turntable, shelf, drip pan, battery charger/adapter, and removable hand/foot control for individuals who are unable to operate the chin switch. A minimum height of 10-inches from tabletop surface to mouth level is required. OPTIONS: Extra battery charger/adapter. POWER: Uses a 6-volt rechargeable battery or adapter. DIMENSIONS: 12 x 18 inches (30 x 46cm). WEIGHT: 16.3/8 pounds. Total weight of carrying case and all components is 28 pounds.
-
X-CORE 3
X-Core Wheels are rear wheelchair wheels designed to replace the existing wheels on the chair. Made of carbon fiber composites, these lightweight wheels have three brodly-spaced spokes and welded hard anodized aluminum handrims. The maximum tire pressure for these wheels is 100 pounds per square inch. These wheels accept 25-inch wheelchair tires or 26-inch mountain bike tires. DIMENSIONS: These wheels fit .5-inch axles and are 25 x 1 inches in diameter.
See Allegro Medical Supplies Inc. products that are no longer available.

