Adaptive Switch Laboratories, Inc. - ASL

125 Spur 191
Suite C
Spicewood, Texas 78669
United States
Telephone: 800-626-8698 or 830-798-0005.
Fax: 830-798-6221.
Web: http://www.asl-inc.com.
Email: info@asl-inc.com.

Products manufactured by Adaptive Switch Laboratories, Inc. - ASL (listed alphabetically)

1. ASL 12 VOLT SEALED LEAD ACID BATTERY AND CHARGER (MODEL ASL515)

   The ASL 12 Volt Sealed Lead Acid Battery and Charger, model ASL515, is a battery for wheelchair accessories, switches, or sensors, designed for use by individuals with mobility disabilities. This transportable battery provides a 12-volt power source for accessories or 12-volt direct current (DC) switches/sensors. The battery is lightweight and can fit into a small wheelchair pouch. It provides 1.2 amp hours of power. The battery is sealed and comes with a charger. DIMENSIONS (HxLxW): 2 x 4 x 2 inches.

2. ASL 4 FUNCTION SIP & PUFF BED CONTROL (MODEL ASL704)

   The ASL 4 Function Sip & Puff Bed Control, model ASL704, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This control interface for a four- function electric bed or semi electric bed comes with a visual four function display and a sip n' puff control.

3. ASL 6 FUNCTION BIG BUTTON BED CONTROL (MODEL ASL706)

   The ASL 6 Function Big Button Bed Control, model ASL706, is a bed control designed for use by individuals with fine motor disabilities, cerebral palsy, or neurological or severe physical disabilities. This control interface for a six-function electric bed has six large push buttons. To operate, this unit interfaces with the ASL 703 Six Function Bed Control (not included; see separate entry). It allows each function to be accessed through the use of large mechanical buttons in place of the small, hand-held, bed control pendant. The push button interface comes with a cable. OPTIONS: Six function bed controller(model ASL703). COLOR: Red buttons.

4. ASL 6 FUNCTION SIP & PUFF BED CONTROL (MODEL ASL703)

   The ASL 6 Function Sip & Puff Bed Control, model ASL703, is a pneumatic bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This controller for a six-function electric bed allows full control of a hospital bed through the use of a sip and puff control system. A sip command selects the bed function desired and a puff command activates the choice. The bed control interface comes with a visual six-function display and sip n' puff control. OPTIONS: Six button control interface (model ASL 706).

5. ASL ADJUSTABLE BEAM SWITCH WITH 3 PIN CONNECTOR (MODEL ASL210_3)

   The ASL Adjustable Beam Switch with 3 Pin Connector, model ASL210_3, is a head position switch designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This switch works in conjunction with driver controls from Adaptive Switch Laboratories, including the ASL 105 head array package (see separate entry), to allow head position to control power wheelchair switch activation. This beam switch has an adjustable range. OPTIONS: Replacement switch mounting bracket for beam switch (model ASL 605). POWER: Uses 24-volt power received through the unit's 3 pin interface with an ASL non-proportional driver control (not included).

6. ASL ADJUSTABLE BEAM SWITCH WITH MONO PORT (MODEL ASL210_M)

   The ASL Adjustable Beam Switch with Mono Port, model ASL210_M, is a head position switch designed for use by individuals with mobility disabilities, spinal cord injury, or severe phsyical disabilities. This sensor switch has an adjustable beam range, and can be used to control a power wheelchair or other devices through head position. For powered wheelchair use it works in conjunction with an ASL proportional driver control. An ASL 804 power source cable (not included)is required to receive power from the power wheelchair. This switch works with all power wheelchair types, and comes with a mono port connector with a 12- or 24-volt power connector. OPTIONS: Replacement switch mounting bracket for beam switch (model ASL 605). POWER: Uses 12 or 24 volts from power wheelchair.

7. ASL ADJUSTABLE PHOTO-ELECTRIC SENSOR WITH 3 PIN CONNECTOR (MODEL ASL209_3)

   The ASL Adjustable Photo-Electric Sensor with 3 Pin Connector, model ASL209_3, is a photo-electric wheelchair control switch designed for use by individuals with gross motor disabilities or mobility disabilities. This adjustable photo- electric switch has a 3-pin connector made to interface with any ASL non proportional driver control, and it can work with all power chair types. An interface box with distance dial is included. OPTIONS: Armrest switch mounting bracket (model ASL 611). POWER: Uses 24 volts of power received through the 3-pin connector interfaced with the ASL driver control module.

8. ASL ADJUSTABLE PHOTO-ELECTRIC SENSOR WITH MONO PORT (MODEL ASL209_M)

   The ASL Adjustable Photo-Electric Sensor with Mono Port, model ASL209_M, is a photo-electric power wheelchair control switch designed for use by individuals with gross motor disabilities or mobility disabilities. This adjustable photo- electric switch can be used on a power wheelchair with ASL proportional driving controls, or for non-driving purposes. It requires the addition of an appropriate ASL 804 power source cable to receive power from the power wheelchair, and can be used with all power chair types. The switch comes with an interface box with distance dial and a mono port connector with a 12- or 24-volt power connector. OPTIONS: Armrest switch mounting bracket (model ASL 611). POWER: Uses 12 or 24 volts received from the power wheelchair.

9. ASL ADJUSTABLE PROXIMITY SENSOR WITH MONO PORT (MODEL ASL208_M)

   The ASL Adjustable Proximity Sensor with mono port, model ASL208_M, is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This "no touch" proximity switch has an adjustable "void space" range, which allows the switch to function when mounted under a surface up to a half-inch thick, thus allowing the proximity field to begin above the voided area (for example, the surface of a tray). This switch works with ASL proportional driver controls or for non-driving utilization. It can work with all power chair types, but requires the addition of an appropriate ASL 804 power source cable to receive power from the power wheelchair. The proximity switch comes with a 12-or 24- volt power connector. OPTIONS: Armrest switch mounting bracket.

10. ASL BUTTON SWITCH (MODEL ASL305)

    The ASL Button Switch, model ASL305, is a button switch designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This light touch button switch has a mono port and can be used on a powered wheelchair or to control a computer or other accessory. OPTIONS: Armrest switch mounting bracket (model ASL 611).

11. ASL EGG SWITCH (MODEL ASL300)

    The ASL Egg Switch, model ASL300, is a mechanical button switch designed for use by individuals with cerebral palsy or neurological or upper extremity disabilities. This brightly- colored oval-shaped switch features a seal that prevents liquid or food spillage from entering the switch and interfering with its operation. The base of the switch has screw insets for secure mounting. Each switch comes with a colored cover and a mono port. OPTIONS: Arm rest switch mounting bracket (model ASL 611); finger ring mount (model ASL 300R). COLORS: Red, green, blue, yellow, or black.

12. ASL EGG SWITCH FINGER RING MOUNT (MODEL ASL300R)

    The ASL Egg Switch Finger Ring Mount, model ASL300R, is switch mounting hardware designed for use by individuals with cerebral palsy or neurological or upper extremity disabilities. This mount for the ASL 300 Egg Switch (not included; see separate entry) holds the Egg Switch near the user's finger. Screws for the switch are included. OPTIONS: Egg switch (model ASL 300).

13. ASL FIBER OPTIC SENSOR WITH MONO PORT (MODEL ASL202_M)

    The ASL Fiber Optic Sensor with Mono Port, model ASL202_M, is a sensor switch designed for use by individuals with mobility, communication, or severe physical disabilities. This single function switch has an adjustable activation range from touch to 2.5 inches, with a round target area. This fiber optic switch can be programmed for either normally open (NO) or normally closed (NC) operation. In the NO mode, switch activation occurs when an object is detected in the adjusted range. In the NC mode, switch activation occurs when an object is no longer detected in the adjusted range. This is a near switch which can be used as a passive "kill" switch on sip & puff systems, a reset switch on chin control systems, an access switch for augmentative communication devices, and a control switch for computer access using Morse code and single switch scan. This switch can be used with any power chair type; it requires the addition of an appropriate ASL 804 power source cable to receive power from the power wheelchair. The fiber optic switch comes with an interface box with distance dial, a fiber optic cutter, a 12 or 24 volt power connector, and a mono port connector. OPTIONS: Replacement mount for attaching the sip and puff and a stealth fiber optic mount for headrest. DIMENSIONS: The target area is 0.25 inch in diameter.

14. ASL FIVE SWITCH ADAPTOR INTERFACE BOX (MODEL ASL502)

    The ASL Five Switch Adaptor Interface Box, model ASL502, is a control switch interface unit designed for use by individuals with neurological or severe physical disabilities or spinal cord injury. This switch interface unit enables an individual to utilize five separate switch sites to control up to five separate functions or devices. The unit can interface with powered seating modules, communication devices, etc., through a D-9 connector. It works with any mono port switch and all power chair types. The adapter box comes with 5 mono jacks and a D-9 connector.

15. ASL LAPTOP POWER CONVERTER (ASL509)

    The ASL Laptop Power Converter, model ASL509, is a wheelchair battery adaptor designed for use by individuals with mobility disabilities. This adaptor enables the user to run a laptop computer using a powered wheelchair battery. The power source converter connects to the powerchair batteries and converts 24 volts to the voltage required to power a laptop computer. To operate, this converter requires the computer's automotive power adaptor and a model ASL804 power source adaptor.

16. ASL LIP SWITCH (MODEL ASL301)

    The ASL Lip Switch, model ASL301, is a light touch mechanical switch for the lip or tongue, designed for use by individuals with spinal cord injury or neurological or severe physical disabilities. This switch can be used for tongue or lip control of a powered wheelchair, computer, or other device. It has a mono port and comes integrated into a pneumatic tube that can be used for incorporation into a Sip n' Puff system.

17. ASL LOW VOLTAGE POWER LEG BAG EMPTIER (MODEL ASL711)

    The ASL Low Voltage Power Leg Bag Emptier, model ASL711, is a automatic leg bag emptier designed for use by individuals with neurological disabilities, spinal cord injury, or severe physical disabilities. This emptying mechanism for a leg bag receives power and operation signals from a for powered wheelchair. The leg bag emptying mechanism includes all necessary cables.

18. ASL MICROLIGHT SWITCH (MODEL ASL312)

    The ASL Microlight Switch, model ASL312, is a chin or finger switch designed for use by individuals with neurological or severe physical disabilities or spinal cord injury. This mechanical switch can be activated with an extremely light touch by a finger, chin, or other body part. The switch has a mono port and can be used for computer access or for wheelchair control for all power chair types.

19. ASL MOUSE EMULATOR/USB (MODEL ASL519)

    The ASL Mouse Emulator/USB, ASL519, is a mouse emulator designed for use by individuals with mobility disabilities. This system allows a power wheelchair driving system to function as a mouse interface for an on-chair computer. Computer access is provided via the computer's USB port. The system works with all power chair types, and includes all interface cables. OPTIONS: Laptop converter (model ASL 509); joystick extension 5th switch with T handle or straight version with a mono port (model ASL 521). COMPATIBILITY: For use with IBM or compatible or Macintosh on-chair computers.

20. ASL PNEUMATIC SWITCH - SIP N PUFF (MODEL ASL308)

    The ASL Pneumatic Switch - Sip & Puff, model ASL308, is a pneumatic switch designed for use by individuals with cerebral palsy, neurological disabilities, upper extremity amputation, spinal cord injury, or upper extremity disabilities. This switch has two mono jack outputs that allow breath control of two separate functions. OPTIONS: ASL 607 series of sip n puff tube mounts.

21. ASL PROXIMITY SENSOR WITH MONO PORT (MODEL ASL204_M)

    The ASL Proximity Sensor with mono port, model ASL204_M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used through very thin surfaces. It can be used with all power chair types. Power chair use requires the additional of an appropriate ASL 804 power source cable to receive power from the power wheelchair. The proximity comes with a mono port connector and a 12- or 24-volt power connector. OPTIONS: Armrest switch mounting bracket.

22. ASL REMOTE EMERGENCY STOP SWITCH (MODEL ASL504)

    The ASL Remote Emergency Stop Switch, model ASL504, is a remote wheelchair control switch designed for use by trainers of individuals learning to use a power wheelchair. This switch allows a power chair to be stopped within a range of 50 feet when intervention is needed during training. It comes with an on-chair receiver for the power chair. Receivers are available in a choice of Anderson (order model ASL 804), Invacare Lego Block style, Pride, Permobil, or Redel.

23. ASL SCANNING 6 FUNCTION BED CONTROL WITH SINGLE SWITCH ACTIVATION (MODEL ASL702)

    The ASL Scanning 6 Function Bed Control with Single Switch Activation, model ASL702, is a bed control designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This scanning six- function bed control for a full electric bed can be operated as a single function. The bed control unit comes with an ASL 300 egg switch and ASL300R ring mount.

24. ASL SINGLE SWITCH SCANNER PACKAGE FOR INVACARE ELECTRONICS (MODEL PASL 101IVC)

    The ASL Single Switch Scanner package for Invacare electronics, model PASL 101IVC, is a powered wheelchair controller designed for use by individuals with mobility disabilities, neurological disabilities, or spinal cord injury. This driver control device enables an individual to drive a power chair and access and operate all power seat functions using only one switch. The device has an operator's display module with five LEDs that represent forward, right, left, reverse, and select. These LEDs illuminate and rotate at the scan rate selected. The user can drive the chair or change the mode of operation by activating the drive switch when the appropriate LED is illuminated. Every time the drive switch is released, the scanner returns to the forward position to begin a new rotation. This controller is designed for use with Invacare power chairs and requires an Invacare digital switch interface (not included). The controller comes with a single switch scanner (model ASL 101PG), mounting hardware (model ASL 611), and a choice of ASL drive switch: adjustable proximity (model ASL 208), proximity (model ASL 204), egg (model ASL 300), or light and medium wobble (models ASL 304A or ASL 304B). OPTIONS: Hardware options include a stealth fiber optic mount (model ASL 620) and a left or right side swing-away mechanism that mounts to an ASL head array or Otto Bock style headrest (model ASL 913). Electronic options include a large display with jumbo leads (model ASL JLM), a communication modification (model ASL CM), an auditory feedback modification (model ASL AFM), and a fiber optic switch (model ASL 203).

25. ASL SINGLE SWITCH SCANNER PACKAGE FOR P&G ELECTRONICS (MODEL PASL101PG)

    The ASL Single Switch Scanner package for P&G Electronics, model PASL101PG, is a powered wheelchair controller designed for use by individuals with mobility, neurological, or severe physical disabilities. This driver control device enables an individual to drive a Jazzy, Quickie, or Permobil power chair with one switch, and access and operate all power seat functions. The system requires a P&G USCM (Omni Plus) digital interface (not included). The single switch control unit has a display module that contains five (5) LEDs that represent forward, right, left, reverse, and select, all of which have an adjustable scan rate. The user can drive the chair or change the mode of operation by activating the drive switch when the appropriate LED is illuminated. Every time the drive switch is released the scanner returns to the forward position to begin a new rotation. Other features include an auxiliary device access port and a smart power source that can provide 12 or 24 volts to an electronic switch. The package includes an ASL 101PG single switch scanner; a choice of ASL drive switch (models ASL 204 proximity switch, ASL 208 adjustable proximity switch, ASL 300 egg switch, ASL 304A light switch, ASL 304B medium wobble switch, or ASL 312 microlight switch; switch mounting hardware; operator’s display module; an attendant control module/training intervention control device. OPTIONS: Stealth fiber optic mount (model ASL 620); swing away mount for ASL head array or Otto Bock style headrest (model ASL 913); large display with jumbo leads (model ASL JLM); communication modification (model ASL CM); auditory feedback modification (model ASL AFM); fiber optic switch alone (model ASL 203) or built into a swing away mechanism (model ASL 620). POWER: Uses power received through its connection to the P&G USCM / Omni Plus digital interface.

26. ASL TREADLITE SWITCH (MODEL ASL309)

    The ASL Treadlite switch, model ASL309, is a foot switch designed for use by individuals with cerebral palsy, neurological disabilities, or severe physical disabilities. This medium-force paddle switch has a mono port and enabless gross motor extremity motion activation of a variety of devices.

27. ASL WIRELESS IR MOUSE EMULATOR 3-CHANNEL USB (MODEL ASL550)

    The ASL Wireless IR Mouse Emulator 3-channel USB, model ASL550, is a mouse emulator designed for use by individuals with mobility disabilities. This wireless, infra-red (IR) mouse emulator provides computer access using a power wheelchair driving system as the mouse interface. It has three function channels for use with three directional RIM driving systems and works with all power chair types. The system includes an on-chair IR 3 functional channel transmitter, a desktop IR receiver and computer interface, and all cables. OPTIONS: Laptop converter (model ASL 509).

28. ASL WIRELESS IR MOUSE EMULATOR 5-CHANNEL USB (MODEL ASL551)

    The ASL Wireless IR Mouse Emulator 5-channel USB, model ASL551, is a mouse emulator designed for use by individuals with mobility disabilities. This wireless, infra-red (IR) mouse emulator has 5 function channels and provides computer access using a power wheelchair driving system as the mouse interface. It works with all chair types. The system comes with an on-chair IR 5 functional channel transmitter, a desktop IR receiver and computer interface, and all required cables. OPTIONS: Laptop converter, model ASL 509; joystick extension 5th switch with T handle or straight version with mono port (model ASL 521).

29. ASL WOBBLE SWITCH - LIGHT PRESSURE (MODEL ASL304A)

    The ASL Wobble Switch - Light Pressure, model ASL304A, is a rocker switch designed for use by individuals with cerebral palsy or neurological or severe physical disabilities. This wobble switch can be used as a reset or mode switch for a powered wheelchair, computer, or other device, and is activated with light pressure. The switch has a mono port. OPTIONS: Armrest switch mounting bracket (model ASL 611).

30. ASL WOBBLE SWITCH - MEDIUM PRESSURE (MODEL ASL304B)

    The ASL Wobble Switch - Medium Pressure, ASL 304B, is a rocker switch designed for use by individuals with cerebral palsy or neurological or severe physical disabilities. This robust mechanical switch comes with a mono port and can be used as a reset or mode switch on a power wheelchair, computer, or other device for use by individuals with gross movements and limited control. OPTIONS: Armrest switch mounting bracket (model ASL 611).

31. FIBER OPTIC SENSOR WITH 3 PIN CONNECTOR (MODEL ASL 202_3)

    The Fiber Optic Sensor with 3 pin connector, model ASL 202_3, is a sensor switch designed for use by individuals who require a small, fine, no force switch type. This single function fiber optic sensor switch has a round target area with an adjustable activation range from touch to 2.5 inches. It can be programmed for either normally open or normally closed operation. In the normally open (NO) mode, switch activation occurs when an object is detected in the selected range. In the normally closed (NC) mode, switch activation occurs when an object is no longer detected in the selected range. This switch can be used as a passive "kill" switch on sip & puff systems, a reset switch on chin control systems, an access switch for augmentative communication devices, or a control switch for computer access using Morse code and single switch scan. It works with any power chair type and its power adapter and 3-pin connector can interface with any of the non-proportional ASL driver controls. The switch comes with an amplifier, fiber optic cutter, and 3-pin connector. POWER: This switch receives its power through its 3-pin connector when interfaced with the ASL interface. OPTIONS: Replacement mount for attaching a sip and puff switch (model ASL 605) and a stealth fiber optic mount for headrest (model ASL 620). DIMENSIONS: The switch target area is a quarter inch in diameter.

32. STEALTH COMFORT PLUS HEADREST (MODELS ASL909 & ASL910)

    The Stealth Comfort Plus Headrest is a wheelchair headrest designed for use by individuals with mobility disabilities. This large padded headrest comes with fixed mounting hardware. Padded with dual layers of premium foam, this headrest comes with a plush slip-on Darlexx cover. It has a metal back and comes with half-inch square Otto-Bock style headrest hardware. OPTIONS: Flipdown headrest hardware (model ASL617); ajustable/removable headrest hardware (model ASL623). DIMENSIONS: model ASL909 is 10 inches wide; model ASL910 is 14 inches wide.