Handicare (Formerly Movingpeople.net, a division of Handicare AS)

Vossenbeemd 104
5705 CL Helmond, Netherlands
Telephone: 011-31-492-59-38-88.
Fax: 011-31-492-53-79-31.
Web: http://www.movingpeople.net.
Email: info@movingpeople.net.

Products manufactured by Handicare (Formerly Movingpeople.net, a division of Handicare AS) (listed alphabetically)

1. CALYPSO

   The Calypso is a three- or four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Both models include a front basket. FRAME (LxW): 46.5 x 24.5 inches (3-wheeled model) or 47.5 x 24.5 inches (4-wheeled model). The scooter has all-round suspension and is available in red or green. Custom frame adjustments are available. CONTROLS: A hand throttle is standard; a foot throttle (pedal) is optional. Special controllers and integrated wheelchair and enviroment control are available. SEAT (LxW): 17.5 x 17.5 to 22.75 inches on both models. An adjustable captain's seat with headrest is standard; a master's seat is optional. The back height is 15.75 inches. UPHOLSTERY: Padded seat and back. Custom upholstery is available. ARMRESTS: Flip-up armrests. WHEELS: 10-inch diameter front and back wheels. OPTIONS: Cane holder, rear basket, brake light, and mirror.POWER: Uses 40 Ah batteries with charger (included). SPEEDS: 5 miles per hour. CAPACITY: 275 pounds. WEIGHT: 172 pounds without batteries.

2. EZ CARE COIL MATTRESS (MODEL EZ-115000)

   The EZ Care Coil Mattress, model EZ-115000, is a hospital mattress designed to provide firm innerspring support. The vinyl cover can be cleaned with a mild disinfectant. Perimeter wire allows for full gatch adjustments without breakdown. DIMENSIONS (HxLxW): 6.5 x 80 x 36 inches.

3. EZ CARE FITTED MATTRESS COVER (MODEL EZ-115100)

   The EZ Care Fitted Mattress Cover, model EZ-115100, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has elasticized edges to keep it in place.

4. EZ CARE FOAM MATTRESS (MODEL EZ-115020)

   The EZ Care Foam Mattress, model EZ-115020, is a foam mattress designed to provide firm support. The vinyl cover is easily cleaned with a mild disinfectant.

5. EZ CARE HEIGHT ADJUSTABLE OVERBED TABLE (MODEL EZ-110550)

   The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on the table top will lock the column. DIMENSIONS: The height adjusts from 30 to 47 inches. The table surface is 30 x 15 inches. The base is 26.5 x 15.5 inches. WEIGHT: 22 pounds. COLOR: The table surface is walnut.

6. EZ CARE HEIGHT ADJUSTABLE PIVOT AND TILT OVERBED TABLE (MODEL EZ-110500)

   The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to accommodate reading and eating. DIMENSIONS: The height adjusts from 28 to 37 inches. The table surface is 23.5 x 15.75 inches. The base is 25 x 25 inches. WEIGHT: 21 pounds.

7. EZ CARE HOME CARE BED

   The EZ Care Home Care Bed is a motorized bed designed for use by people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can raised and lowered to facilitate transfer. Trendelenberg and reverse Trendelenberg positions can be attained. By moving all three independent areas, the head/foot gatch can be raised or lowered. FRAME: The frame splits into independent components and does not include side rails. CONTROLS: Controls are located on an ergonomically designed hand pendant. POWER: Three independent motors are powered by a single connection to a standard wall outlet. There is an emergency power supply provided by two 9-volt batteries (included) that will lower any section of the bed in case of power outage. DIMENSIONS (HxLxW): 15.5 to 21.5 x 87.5 x 36 inches. The head gatch in high position is 85 inches. CAPACITY: 450 pounds. WARRANTY: Lifetime warranty on the frame; 2-year warranty on the mattress; 2-year warranty on electrical, parts, and other components.

8. EZ CARE IV POLE (MODEL EZ-110800)

   The EZ Care IV Pole, model EZ-110800, is an IV pole with two hooks. Made of chrome-plated steel, the pole is height adjustable using a locking collar. The weighted base has four ball bearing casters.

9. EZ CARE MATTRESS COVER WITH ZIPPER (MODEL EZ-115200)

   The EZ Care Mattress Cover with Zipper, model EZ-115200, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has a zippered closure to keep it in place.

10. EZ CARE PRESSURE RELIEF MATTRESS (MODEL EZ-115050)

    The EZ Care Pressure Relief Mattress, model EZ-115050, is a foam mattress designed for use by individuals at risk for pressure sores or ulcers. This pressure-relieving mattress is made of two layers of foam. The diagonally-cut foam top layer reduces pressure and friction, and the resilient firm foam base provides support and comfort. The mattress has a durable, zippered, waterproof, antimicrobial cover. The mattress and cover are latex-free.

11. EZ CARE SIDE RAILS (MODEL EZ-110100)

    The EZ Care Side Rails, model EZ-110100, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on most split spring beds. The rails are made of 1-inch diameter chrome-plated steel, and they telescope to adjust to the length of the bed.

12. EZ CARE SIDE RAILS (MODEL EZ-110110)

    The EZ Care Side Rails, model EZ-110110, are heavy-duty half-length hospital or home care bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on either the head or foot of a bed. The rails are made of heavy duty chrome-plated steel.

13. EZ CARE SIDE RAILS (MODEL EZ-110200)

    The EZ Care Side Rails, model EZ-110200, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. These rails install without tools on most conventional or adjustable beds. The rails are made of chrome-plated steel, and they expand to accommodate a king size bed.

14. EZ CARE TRAPEZE BAR WITH CLAMP AND BASE (MODELS EZ-110700 AND EZ-110750)

    The EZ Care Trapeze Bar with Clamp and Base is a trapeze designed for use in in-bed positioning by individuals with mobility or lower extremity disabilities or spinal cord injury. The triangular trapeze is suspended from an adjustable chrome-plated bar that attaches to a hospital bed headboard. The EZ Care Trapeze Base, model EZ-110750, (sold separately) stands on the floor to enable the trapeze to be used as a free-standing unit. The base and support pole are made of square chrome-plated tubing. The trapeze’s height, length, and horizontal positions are adjustable. The base folds for storage and transport. No tools are required for assembly. CAPACITY: 250 pounds.

Products distributed by Handicare (Formerly Movingpeople.net, a division of Handicare AS) (listed alphabetically)

1. EZ-ACCESS MODULAR RAMP

   The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations. No anchoring into concrete footings or pads is required. Bottom and top transition plates are included. OPTIONS: Semicircular loops to connect the ends of a pair of handrails on one side of a ramp or ramp section. DIMENSIONS: Ramp components are available in lengths of 4, 6, 8 and 10 feet. The standard width is 3 feet. Custom lengths and widths are available. Turning landings are available in 4 x 5 feet and 5 x 5 feet. The ramp and platform supports can be raised and lowered in 1-foot increments. CAPACITY: 850 pounds. WARRANTY: 3-year limited warranty.

2. EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR)

   The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches (model THR 250-1); 2.5 x 24 x 24 inches (model THR RISER 225-1 PR). CAPACITY: 850 pounds. WEIGHT: 40 pounds (model THR 250-1); 23.5 pounds per riser (model THR RISER 225-1 PR). WARRANTY: One-year limited warranty.

3. EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1)

   The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides is 42 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds. WARRANTY: 1-year limited warranty.

4. EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6)

   The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS6 only). Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle (except model AS2). OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 24 x 29.5 inches (model AS2); 36 x 29.5 inches (model AS3); 48 x 29.5 inches (model AS4); 60 x 29.5 inches (model AS5); and 72 x 29.5 inches (model AS6). Each half when separated is (HxLxW): 4.5 x 24 x 15 inches (model AS2); 4.5 x 36 x 15 inches (model AS3); 4.5 x 48 x 15 inches (model AS4); 4.5 x 60 x 15 inches (model AS5); and 4.5 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 12 pounds (model AS2); 16 pounds (model AS3); 20 pounds (model AS4); 26 pounds (model AS5); and 30 pounds (model AS6). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

5. EZ-ACCESS TRIFOLD ADVANTAGE SERIES RAMP (MODELS AS5, AS6, AS7, AS8 & AS10)

   The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle. The ramp can be carried in one or two pieces. The hinge with interlocking brackets provides smoother operation and reduced pinch points. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 60 x 29.5 inches (model AS5); 72 x 29.5 inches (model AS6); 84 x 29.5 inches (model AS7); 96 x 29.5 inches (model AS8); and 120 x 29.5 inches (model AS10). The folded dimensions are (HxLxW): 11.5 x 30.75 x 15 inches (model AS5); 11.5 x 36.25 x 15 inches (model AS6); 11.5 x 42.25 x 15 inches (model AS7); 11.5 x 48.75 x 15 inches (model AS8); and 11.5 x 60.75 x 15 inches (model AS10). CAPACITY: 800 pounds (all models). WEIGHT: 32 pounds (model AS5); 38 pounds (model AS6); 44 pounds (model AS7); 50 pounds (model AS8); and 60 pounds (model AS10). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

6. NEPTUNE BATH LIFT

   The Neptune Bath Lift is a portable powered bath lift designed for use by adults with mobility disabilities. This lift fits standard tubs, and the frame is secured in the tub by four suction feet. The Neptune features a non-reclining seat with side flaps (which fold in as the lift is lowered) to facilitate transfers. The seat is detachable from the frame. The seat is protected by BioCote, an antimicrobial coating. CONTROLS: A waterproof handset has a battery status indicator and a single rocker switch that can be operated with the fingertips or the heel of the hand. POWER: The Neptune is powered by a 14.4- volt direct current (DC) nominal 7A max power input from a battery. The battery charger requires connection to an 8-watt, 120-volt alternating current (AC) power source. The battery and charger are included. OPTIONS: Carrying bag and extra-wide side flaps. DIMENSIONS (LxW): 18.2 x 15 inches. The seat is 28.5 inches wide with the side flaps extended. The minimum lift height is 2.8 inches and the maximum height is 17.1 inches. CAPACITY: 350 pounds. WEIGHT: 21.2 pounds. COLOR: White.

7. PATHWAY LITE (MODELS AS2, AS3, AS4, AS5, AS6, AS7 & AS8)

   The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (model AS8). The outside width for all models is 32.5 inches. CAPACITY: 600 pounds for all models. WEIGHT: 12 pounds (model AS2); 18 pounds (model AS3); 22 pounds (model AS4); 28 pounds (model AS5); 32 pounds (model AS6); 37 pounds (model AS7); and 42 pounds (model AS8). WARRANTY: 3-year limited warranty.

See Handicare (Formerly Movingpeople.net, a division of Handicare AS) products that are no longer available.