• Information Centers
|
• Conferences
|
• Companies by State
|
• International Resources
|
• Links A to Z

Handicare USA (formerly Movingpeople.net, a division of Handicare AS)

2201 Hangar Place
Suite 200
Allentown, Pennsylvania 18109
United States
Telephone: 866-276 -5438 or 610 266 5260.
Fax: 610 266 5266.
Web: http://www.handicare.com/us.
Email: customerservice.usa@handicare.com.

Products manufactured by Handicare USA (formerly Movingpeople.net, a division of Handicare AS) (listed alphabetically)

1. ANTI-SLIP PAD (MODEL 8040)

   The Anti-Slip Pad, model 8040, is a non-slip pad designed for use by individuals with mobility or balance disabilities. This small, lightweight rubber-foam pad can be used to prevent the individual from slipping in bed or in a chair or it can be placed under the user's feet to prevent sliding during transfers. DIMENSIONS (LxWx H): 17 x 17 x .25 inches. WEIGHT: .1 pound.

2. AUTOSLIDE (MODEL 8100)

   The Autoslide, model 8100, is a car transfer aid designed to assist individuals with mobility disabilities in entering or exiting a car. The bottom section of the two-section device is attached to the back of the seat frame using a strong hook and the front is strapped under the seat to prevent sliding. The user sits on the attached top section of the unit and rotates; the top section slides against the bottom section to provide smooth transfers. The small, lightweight unit is equipped with side handles. DIMENSIONS (LxW): 18 x 18 inches. WEIGHT: 1 pound.

3. COMFORT CUSHION (MODEL 8050)

   The Comfort Cushion, model 8050, is a non-slip rubber-foam cushion designed for use by individuals with mobility or balance disabilities. Made of cellular plastic, the cushion is placed under the buttocks to prevent the user from sliding down in bed and at the same time relieve pressure on the abdomen. Placing the pillow under the knees is also comfortable and relieves leg pressure. DIMENSIONS (LxW): 40 x 50 centimeters.

4. EASYBELT (MODELS 6012, 6013, 6014, & 6015)

   EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (6015). DIMENSIONS: Extra small is for 45 to 70 centimeter waists; small is for 60 to 100 centimeter waists; medium is for 70 to 120 centimeter waists; large is for 100 to 160 centimeter waists.

5. EASYGLIDE (MODELS 5020, 5050, 5060, & 5070)

   The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model 5050 is 30 x 13 x .25 inches. Model 5060 is 23 x 10 x .2 inches. Model 5070 is 17 x 8 x.2 inches. CAPCITY: All models have a maximum capacity of 400 pounds. WEIGHT: Models 5020 weighs pounds; model 5050 weighs 3 pounds; model 5060 weighs 1.5 pounds; and model 5070 weighs 1 pound.

6. EASYSLIDE (MODEL 1030)

   The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual is turned on one side and the slide is placed beneath him/her so the individual is lying half on it. The individual should be tilted slightly so that the full body weight is pressing on the mat The mat is then pulled in the direction of the intended move, pulling the individual fully on to the mat and accomplishing the transfer. DIMENSIONS (LxW): 200 x 90 or 190 x 60 centimeters.

7. EASYSLIDE (MODEL 1230)

   The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 100 x 70 centimeters.

8. EASYSLIDE (MODEL 1480)

   The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 200 x 90 centimeters.

9. EASYSLIDE (MODELS 2010, 2015, 2020, & 2030)

   The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. Models 2020 and 2030 have outer material consisting of microfibres with a removable protective cover in waterproof polyester. OPTIONS: Disposable protective polyethene covers. DIMENSIONS (LxW): 50 x 60 centimeters (2010, 2020, 2030) or 25 x 60 centimeters (2015).

10. EVA MOBILE LIFT (MODEL 450EE)

    The Eva Mobile Lift, model 450EE, is a powered transfer lift designed for use in transferrring individuals with mobility or severe physical disabilities. It can lift an individual from a seated or prone position, and can also be used for gait training in combination with lifting accessories such as a gait belt.

11. EZ CARE COIL MATTRESS (MODEL EZ-115000)

    The EZ Care Coil Mattress, model EZ-115000, is a hospital mattress designed to provide firm innerspring support. The vinyl cover can be cleaned with a mild disinfectant. Perimeter wire allows for full gatch adjustments without breakdown. DIMENSIONS (HxLxW): 6.5 x 80 x 36 inches.

12. EZ CARE FITTED MATTRESS COVER (MODEL EZ-115100)

    The EZ Care Fitted Mattress Cover, model EZ-115100, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has elasticized edges to keep it in place.

13. EZ CARE FOAM MATTRESS (MODEL EZ-115020)

    The EZ Care Foam Mattress, model EZ-115020, is a foam mattress designed to provide firm support. The vinyl cover is easily cleaned with a mild disinfectant.

14. EZ CARE HEIGHT ADJUSTABLE OVERBED TABLE (MODEL EZ-110550)

    The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on the table top will lock the column. DIMENSIONS: The height adjusts from 30 to 47 inches. The table surface is 30 x 15 inches. The base is 26.5 x 15.5 inches. WEIGHT: 22 pounds. COLOR: The table surface is walnut.

15. EZ CARE HEIGHT ADJUSTABLE PIVOT AND TILT OVERBED TABLE (MODEL EZ-110500)

    The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to accommodate reading and eating. DIMENSIONS: The height adjusts from 28 to 37 inches. The table surface is 23.5 x 15.75 inches. The base is 25 x 25 inches. WEIGHT: 21 pounds.

16. EZ CARE HOME CARE BED

    The EZ Care Home Care Bed is a motorized bed designed for use by people with severe physical or mobility disabilities or spinal cord injury. This fully electric bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can raised and lowered to facilitate transfer. Trendelenberg and reverse Trendelenberg positions can be attained. By moving all three independent areas, the head/foot gatch can be raised or lowered. FRAME: The frame splits into independent components and does not include side rails. CONTROLS: Controls are located on an ergonomically designed hand pendant. POWER: Three independent motors are powered by a single connection to a standard wall outlet. There is an emergency power supply provided by two 9-volt batteries (included) that will lower any section of the bed in case of power outage. DIMENSIONS (HxLxW): 15.5 to 21.5 x 87.5 x 36 inches. The head gatch in high position is 85 inches. CAPACITY: 450 pounds. WARRANTY: Lifetime warranty on the frame; 2-year warranty on the mattress; 2-year warranty on electrical, parts, and other components.

17. EZ CARE IV POLE (MODEL EZ-110800)

    The EZ Care IV Pole, model EZ-110800, is an IV pole with two hooks. Made of chrome-plated steel, the pole is height adjustable using a locking collar. The weighted base has four ball bearing casters.

18. EZ CARE MATTRESS COVER WITH ZIPPER (MODEL EZ-115200)

    The EZ Care Mattress Cover with Zipper, model EZ-115200, is a mattress protector designed for use by individuals with incontinence. This protector is made of waterproof, non-allergenic vinyl and has a zippered closure to keep it in place.

19. EZ CARE PRESSURE RELIEF MATTRESS (MODEL EZ-115050)

    The EZ Care Pressure Relief Mattress, model EZ-115050, is a foam mattress designed for use by individuals at risk for pressure sores or ulcers. This pressure-relieving mattress is made of two layers of foam. The diagonally-cut foam top layer reduces pressure and friction, and the resilient firm foam base provides support and comfort. The mattress has a durable, zippered, waterproof, antimicrobial cover. The mattress and cover are latex-free.

20. EZ CARE SIDE RAILS (MODEL EZ-110100)

    The EZ Care Side Rails, model EZ-110100, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on most split spring beds. The rails are made of 1-inch diameter chrome-plated steel, and they telescope to adjust to the length of the bed.

21. EZ CARE SIDE RAILS (MODEL EZ-110110)

    The EZ Care Side Rails, model EZ-110110, are heavy-duty half-length hospital or home care bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on either the head or foot of a bed. The rails are made of heavy duty chrome-plated steel.

22. EZ CARE SIDE RAILS (MODEL EZ-110200)

    The EZ Care Side Rails, model EZ-110200, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. These rails install without tools on most conventional or adjustable beds. The rails are made of chrome-plated steel, and they expand to accommodate a king size bed.

23. FLEXIBELT (MODELS 6023, 6024, 6025, & 6026)

    Flexibelt, models 6023, 6024, 6025, and 6026, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. The belt has a polyester surface for comfort against the body, with strong vertical and horizontal handles for gripping support. SIZES: Small with 7 handles (6023), medium with 9 handles (6024), large with 11 handles (6025), or extra large with 13 handlees (6026). DIMENSIONS: Small is for 60 to 100 centimeter waists; medium is for 70 to 120 centimeter waists; large is for 100 to 160 centimeter waists; extra large is for 115 to 175 centimeter waists.

24. FLEXIGRIP (MODEL 6090)

    FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

25. FLEXIMOVE (MODELS 3012, 3020, & 3030)

    The Fleximove, models 3012, 3020, and 3030, is a transfer aid designed for turning, positioning, or transferring an individual with mobility disabilities. This unit can be used for moving patients further up in bed or to and from a wheelchair. 3012 has an inner surface made of moisture-resistant nylon for environments with special hygiene requirements, while 3020 and 3030 have a softer, more comfortable velvet surface. DIMENSIONS (LxW): 60 x 20 centimeters (3012, 3030) or 50 x 20 centimeters (3020).

26. FLEXIMOVE (MODELS 4011, 4012, & 4016)

    The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011), 112 x 53 centimeters (4012), and 152 x 53 centimeters (4016).

27. MINISTRETCHER (MODEL 4017)

    The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIMENSIONS (LxW): 135 x 43 centimeters.

28. RENA 440EE

    The Rena 440EE is a sit to stand lift designed for use by individuals with mobility disabilities. This powered lift can be used to stand, pivot transfer, and move a patient from a seated position. The patient is supported with adjustable shin pads, foot supports, and behind the back supports. The lift's leg sections are wide apart to accommodate a variety of chair types. The lift has power raise and lower functions as well as power leg spreading operated by its hand control. It also has manual and electrical emergency lowering and an Emergency Stop function. POWER: Uses batteries. CAPACITY: 440 pounds.

29. RETURN 7500

    ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt.

30. STERLING 1000 SERIES STRAIGHT STAIR LIFT

    The Sterling 1000 Series Straight Stair Lift is an interior stair lift designed for use by individuals with balance, lower extremity, or mobility disabilities. The lift has a folding seat that runs on an aluminum track on one side of the stairway. There are three seating options: A standard Luxury seat, a SpaceSaver seat that takes up less space for use on narrower stairs, and a Perch seat that allows the user to travel in a more upright posture. The seats have wipe-clean, flame-retardant upholstery, can be folded when not in use, and come with a seat belt. There is a lockable control pad under the arm, as well as a handheld remote control unit. Safety sensors stop the unit if obsructions are encountered during travel. OPTIONS: Hinged track to keep the track clear of doorways or other obstructions at the base of the stairs; power footrest that lifts automatically when the front seat section is lifted. POWER: Uses 24-volt direct current (DC) battery. DIMENSIONS: Seat is 15.75 inches deep. The seat back height is 16.5 inches. Footplate-to- seat height is 21 to 34.75 inches. The footplate height is 3 inches. The footplate is 26.5 inches wide and 15.25 inches folded. Armrest width is 17.25 to 23.5 inches. Wall to seat back distance is 5.75 inches. Track intrusion onto staircase is at least 5.5 inches. SPEED: 5 meters per second. CAPACITY: 302 pounds. COLORS: Upholstery is available in sky blue, Kerry pink, bute, or Brechin green. WARRANTY: Two-year manufacturer's parts warranty and lifetime warranty on the gearbox and motor.

31. STERLING 2000 SERIES CURVED STAIR LIFT

    The Sterling 2000 Series Curved Stair Lift is an interior stair lift designed for use by individuals with balance, mobility, or walking disabilities. The lift fits any curved stairway and fits close to the wall with a swivel seat and folding footrest. OPTIONS: Perch seat alowing the user to go up and down stairs in a semi-standing posture; overrun to allow the user to step off at the top landing without swiveling the seat. POWER: Uses 24 volts direct current (DC) battery. DIMENSIONS: Seat swivel radius is 29 inches. Minimum distance from wall to seat back is 6.5 inches. Seat depth is 15.25 inches. Footplate is 26.25 inche wide when open and 15.25 inches wide folded. Armrest width is 23.5 inches (external) and 17.25 inches (internal). Seat back height is 16.5 inches. Footplate-to- seat height is 20 to 25 inches (standard) or 26 to 30.75 inches (perch seat). Footplate height is 2.75 inches. Minimum track intrusion into staircase is 4.5 inches. CAPACITY: 302 pounds. SPEED: 5 inches per second. WARRANTY: Two-year manufacturer's parts warranty and lifetime warranty on the gearbox and motor.

32. STERLING 303 RECLINING BATH LIFT

    The Sterling 303 Reclinining Bath Lift is a portable powered bath lift designed for use by individuals with lower extremity, mobility, neurological, or balance disabilities or spinal cord injury. This lift is securely fixed to the bathtub by suction cups. To remove the lift from the tub, the suction cups are released using the quick-release handle. The lift is equipped with a reclining seat with deluxe comfort covers and large folding side panels that open to rest on the edges of the tub, creating a generous transfer area. The seat is supported by a stainless steel frame. Pressing the DOWN control button lowers the seat to the bottom of the tub and begins the seat recline function. Additional control buttons enable the user to select the amount of recline. Pressing the UP button returns the seat to the starting position at the top of the tub. The unit folds for storage and transport. POWER: Uses the included rechargeable battery. The unit is equipped with a recharge reminder light and an intelligent safety system that checks the power levels before every use. The control will not allow the lift to be lowered unless there is sufficient power to raise it again. DIMENSIONS: The base is 12 x 24 inches. The unit is 39 inches high including the backrest. The backrest is (HxW) 23 x 13 inches. The maximum seat height is 16.1 inches and the minimum height is 2.9 inches. The seat is 15.4 inches wide excluding the side panels and 27.2 inches wide with the side panels opened. The length of the sitting area is 19 inches. CAPACITY: 297 pounds. WEIGHT: 30.3 pounds excluding covers and battery. COLOR: White or blue.

33. TOPSHEET (MODELS 1519 & 1520)

    TopSheet, models 1519 and 1520, is a bed turning aid, incontinent pad, and decubitis pad designed for use by individuals with mobility disabilities or incontinence. The top side (model 1520) is made of super-absorbent material, and the underside (model 1519) consists of a polyurethane-coated moisture-repellant membrane. The surface that the patient lies on is soft, brushed polyester. The surface always feels dry to lie on, which helps prevent pressure sores. Strong straps for fastening to a ceiling lift or mobile lift enable safe turnings. DIMENSIONS (model 1519) Lower part for top sheet is 80 x 140 centimeters; (model 1520) top sheet is 140 x 144 centimeters.

34. TURNSHEET (MODEL 1580)

    The Turnsheet, model 1580, is a transfer aid designed to assist individuals with mobility disabilities in turning or changing positions in bed. The Turnsheet consists of two elements: the first element is quilted mat with a woven cotton top layer, a layer of flame-retardant trevira padding, and a bottom layer of ultra-low friction woven nylon. This element is equipped with webbing straps to be attached to the head of the bed frame. The second element is a mattress cover with an ultra-low friction woven nylon top and a sticky texture bottom layer. Velcro straps that run under the mattress prevent movement of this cover. The first element is used to turn the individual and both elements may be left on the bed permanently. This sheet may be used for assisted or unassisted turning. DIMENSIONS: 150 x 200 centimeters.

35. TURNTABLE (MODEL 5085)

    The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for the transfer. DIMENSIONS: 38 centimeters in diameter. WEIGHT: 297 pounds.

36. WENDYLETT

    WendyLett is a sliding sheet and bed mobility aid designed for use by individuals who find it difficult to turn in bed. The central part is smooth to reduce friction, which enables users to turn or be turned by a caregiver with little force. Care recipients effortlessly slide sideways but are slowed by the anti-slip material at the sides. OPTIONS: WendyLett2Way and WendyLett4Way are drawsheets that can be placed on top of the sliding sheet to prevent sliding down in bed while turning. The drawsheets are striped to indicate in which directions turning is easier. DIMENSIONS: The WendyLett is 100 x 200 centimeters (cm), 140 x 200 cm, 200 x 200 cm, or 200 x 90 cm; the WendyLett2Way is 90 x 180 cm, 100 x 200 cm, or 140 x 200 cm; and the WendyLett4Way is 140 x 200 cm. COLOR: The WendyLett is available in solid white, gray and white checked, or gray and white striped. the WendyLett2Way is available in striped only, and the WendyLett4Way is available in checked only.

Products distributed by Handicare USA (formerly Movingpeople.net, a division of Handicare AS) (listed alphabetically)

1. EZ-ACCESS MODULAR RAMP

   The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations. No anchoring into concrete footings or pads is required. Bottom and top transition plates are included. OPTIONS: Semicircular loops to connect the ends of a pair of handrails on one side of a ramp or ramp section. DIMENSIONS: Ramp components are available in lengths of 4, 6, 8 and 10 feet. The standard width is 3 feet. Custom lengths and widths are available. Turning landings are available in 4 x 5 feet and 5 x 5 feet. The ramp and platform supports can be raised and lowered in 1-foot increments. CAPACITY: 850 pounds. WARRANTY: 3-year limited warranty.

2. EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR)

   The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x 24 x 48 inches (model THR 250-1); 2.5 x 24 x 24 inches (model THR RISER 225-1 PR). CAPACITY: 850 pounds. WEIGHT: 40 pounds (model THR 250-1); 23.5 pounds per riser (model THR RISER 225-1 PR). WARRANTY: One-year limited warranty.

3. EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1)

   The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides is 42 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds. WARRANTY: 1-year limited warranty.

4. EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6)

   The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS6 only). Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle (except model AS2). OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 24 x 29.5 inches (model AS2); 36 x 29.5 inches (model AS3); 48 x 29.5 inches (model AS4); 60 x 29.5 inches (model AS5); and 72 x 29.5 inches (model AS6). Each half when separated is (HxLxW): 4.5 x 24 x 15 inches (model AS2); 4.5 x 36 x 15 inches (model AS3); 4.5 x 48 x 15 inches (model AS4); 4.5 x 60 x 15 inches (model AS5); and 4.5 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 12 pounds (model AS2); 16 pounds (model AS3); 20 pounds (model AS4); 26 pounds (model AS5); and 30 pounds (model AS6). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

5. EZ-ACCESS TRIFOLD ADVANTAGE SERIES RAMP (MODELS AS5, AS6, AS7, AS8 & AS10)

   The EZ-Access Trifold Advantage Series Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and each half has a built-in carrying handle. The ramp can be carried in one or two pieces. The hinge with interlocking brackets provides smoother operation and reduced pinch points. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. DIMENSIONS (LxW): 60 x 29.5 inches (model AS5); 72 x 29.5 inches (model AS6); 84 x 29.5 inches (model AS7); 96 x 29.5 inches (model AS8); and 120 x 29.5 inches (model AS10). The folded dimensions are (HxLxW): 11.5 x 30.75 x 15 inches (model AS5); 11.5 x 36.25 x 15 inches (model AS6); 11.5 x 42.25 x 15 inches (model AS7); 11.5 x 48.75 x 15 inches (model AS8); and 11.5 x 60.75 x 15 inches (model AS10). CAPACITY: 800 pounds (all models). WEIGHT: 32 pounds (model AS5); 38 pounds (model AS6); 44 pounds (model AS7); 50 pounds (model AS8); and 60 pounds (model AS10). COLOR: The reflective stripes are yellow. WARRANTY: 3-year limited warranty.

6. NEPTUNE BATH LIFT

   The Neptune Bath Lift is a portable powered bath lift designed for use by adults with mobility disabilities. This lift fits standard tubs, and the frame is secured in the tub by four suction feet. The Neptune features a non-reclining seat with side flaps (which fold in as the lift is lowered) to facilitate transfers. The seat is detachable from the frame. The seat is protected by BioCote, an antimicrobial coating. CONTROLS: A waterproof handset has a battery status indicator and a single rocker switch that can be operated with the fingertips or the heel of the hand. POWER: The Neptune is powered by a 14.4- volt direct current (DC) nominal 7A max power input from a battery. The battery charger requires connection to an 8-watt, 120-volt alternating current (AC) power source. The battery and charger are included. OPTIONS: Carrying bag and extra-wide side flaps. DIMENSIONS (LxW): 18.2 x 15 inches. The seat is 28.5 inches wide with the side flaps extended. The minimum lift height is 2.8 inches and the maximum height is 17.1 inches. CAPACITY: 350 pounds. WEIGHT: 21.2 pounds. COLOR: White.

7. PATHWAY LITE (MODELS AS2, AS3, AS4, AS5, AS6, AS7 & AS8)

   The PATHWAY Lite are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied non-skid surface. Each PATHWAY Lite ramp has a self-adjusting bottom transition plate. DIMENSIONS (LxW): 24 x 32 inches (model AS2); 36 x 32 inches (model AS3); 48 x 32 inches (model AS4); 60 x 32 inches (model AS5); 72 x 32 inches (model AS6); 84 x 32 inches (model AS7); or 96 x 32 inches (model AS8). The outside width for all models is 32.5 inches. CAPACITY: 600 pounds for all models. WEIGHT: 12 pounds (model AS2); 18 pounds (model AS3); 22 pounds (model AS4); 28 pounds (model AS5); 32 pounds (model AS6); 37 pounds (model AS7); and 42 pounds (model AS8). WARRANTY: 3-year limited warranty.

See Handicare USA (formerly Movingpeople.net, a division of Handicare AS) products that are no longer available.