Mobility Express

4320 U.S. Highway 19
New Port Richey, Florida 34652
United States
Telephone: 800-918-7433 or 727-849-0262.
Fax: 727-849-1380.
Web: http://www.mobilityexpress.com.

Products distributed by Mobility Express (listed alphabetically)

1. CLASSIC HAND CONTROL FOAM GRIP OFFSET (MODEL 3500FX)

   The Classic Hand Control Foam Grip Offset, model 3500FX, is a hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with one hand. For comfort and added leverage when braking and accelerating, this handle and grip are designed to be two inches longer than most standard hand controls. The offset handle is fully adjustable 360 degrees to provide additional knee clearance for taller users while permitting full acceleration. For users who have difficulty reaching the turn signal, the handle can be adjusted to be closer to the turn signal.

2. CLASSIC HAND CONTROL FOAM GRIP STRAIGHT (MODEL 3500F)

   The Classic Hand Control Foam Grip Straight, model 3500F, is a driving hand control designed to allow individuals with lower extremity disabilities to operate the accelerator and brake of a motor vehicle with their hands. The grip and handle are designed to be two inches longer than most standard hand controls to provide more comfortable driving control and added leverage when braking and accelerating.

3. FURNITURE RISERS

   Furniture Risers are leg extenders designed for use by individuals with arthritis, back pain, or mobility or lower extremity disabilities. These leg extenders are designed to make sitting or rising from a couch or bed easier for the user. They are made of plastic with reinforced ribbed construction and include protective non-skid pads to protect the furniture and floor. DIMENSIONS: Raise furniture 3 or 4 inches when used as individual sets or 5 inches when stacked. The width of the 4-inch Risers is 5 inches at the base and 3.75 inches at the top. The width of the 3-inch Risers is 4.5 inches at the base and 3.75 inches at the top. CAPACITY: 350 pounds. WEIGHT: 2 pounds.

4. PVI BARIATRIC MULTIFOLD RAMP (MODELS BAR536, BAR636, BAR736, & BAR836)

   The PVI Bariatric Multifold Ramp, models BAR536, BAR636, BAR736, and BAR836, is a portable ramp designed for use by individuals with mobility disabilities. This ramp separates into two pieces that fold on a center joint hinge. A closure strap locks the ramp panels together, allowing it to be carried like a suitcase. The ramp has an anti-slip high traction surface and durable welded construction. It accomodates wheelchairs and scooters with various wheel configurations. A safety guide indicates if the ramp is on a safe slope. A safety DVD and steel security pins are included. DIMENSIONS (LxW): 60 x 36 inches in use, 32.25 x 17.5 x 11.5 inches folded (BAR536); 72 x 36 inches in use, 38.25 x 17.5 x 11.5 inches folded (BAR636); 84 x 36 inches in use, 44.25 x 17.5 x 11.5 inches folded (BAR736); 96 x 36 inches in use, 50.75 x 17.5 x 11.5 inches folded (BAR836). CAPACITY: 400 pounds single axle; 800 pounds, two axles. WEIGHT: 50 pounds (BAR536); 58 pounds (BAR636); 67 pounds (BAR736); 76 pounds (BAR836). WARRANTY: Limited lifetime warranty.

5. SHOPRIDER SMARTIE (MODEL UL8W)

   The Shoprider Smartie, model UL8W, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 36 x 23 x 37 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. Rear anti-tips are included. This portable chair can be dismantled into three parts for transport. The base is available in red and blue. CONTROLS: VSI joystick controller. RWD: Two 0.45-horsepower motor rear-wheel drive. SEAT (WxDxH): 18 x 17.5 x 19 inches. The seat to floor height of the captain seat adjusts from 19 to 22 inches. UPHOLSTERY: Grey vinyl. ARMRESTS: Padded armrests with adjustable width, height and angle. BRAKES: Electronic brakes. CASTERS: 6-inch front casters. WHEELS: 8-inch rear wheels with flat-free tires. FOOTRESTS: A removable fold-up footrest with adjustable height, length and angle; other legrest kits are optional. OPTIONS: Mesh oxygen tank holder, can holder kit and walker holder kit. POWER: Uses one ENVIROFRIENDLY Battery Pack. An off-board 3 pin 2 amp battery charger is included. SPEEDS: 3.75 miles per hour with a travel range of 10 miles and a maximum climbing angle of 6 degrees. CAPACITY: 250 pounds. WEIGHT: The total weight with batteries and seat is 93 pounds.

6. SHOPRIDER SPRINTER XL3 DELUXE (MODEL 778XL)

   The Shoprider Sprinter XL3 Deluxe, model 778XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable Delta-style tiller. RWD: Rear-wheel drive. SEAT (WxDxH): 22 x 18 x 23 to 27 inches. The back height is 19 inches. The padded, deluxecaptain's seat has a headrest. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: The two rear drive wheels have 12-inch tires. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses two 12-volt batteries. SPEEDS: 5.7 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 500 pounds. WEIGHT: The base weighs 190 pounds without batteries. The batteries weigh 23 pounds each. The seat weighs 34 pounds.

7. SHOPRIDER SPRINTER XL4 DELUXE (MODEL 889XL)

   The Shoprider Sprinter XL4 Deluxe, model 889-XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable Delta-style tiller. RWD: Rear-wheel drive. SEAT (WxDxH): 22 x 18 x 23 to 27 inches. The back height is 19 inches. The padded, deluxecaptain's seat has a headrest. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes with an emergency handbrake. WHEELS: The two rear drive wheels have 12-inch tires. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses two 12-volt batteries. SPEEDS: 5.7 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees. CAPACITY: 500 pounds. WEIGHT: The base weighs 205 pounds without batteries. The batteries weigh 23 pounds each. The seat weighs 34 pounds.

8. SOVEREIGN (MODELS 888-3ES & 888-4ES)

   The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance of 3 inches. The turning radius is 50 inches. The frame on both models disassembles for transport. CONTROLS: Controls are mounted on an adjustable tiller on both models. RWD: Both models are rear-wheel drive with full suspension. SEAT: The padded, sliding swivel deluxe captain's seats have headrests. Both models are also equipped with electric seat lifts and manual recline capability. The seat height adjusts from 21 to 23 inches on model 888-3ES and from 22 to 24 inches on model 888-4ES. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic brakes. WHEELS: Model 888-3ES is a three-wheeled model, with the front wheel comprised of dual articulating wheels. Model 888-4ES is a four-wheeled model. OPTIONS: Sun shade, rear view mirror, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 0 to 5 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees for both models. CAPACITY: 300 pounds. WEIGHT: Both models weigh 110 pounds without batteries. The heaviest part when disassembled on model 888-3ES weighs 41 pounds and 42 pounds on model 888-4ES. The seat weighs 34 pounds on both models.

9. SOVEREIGN (MODELS 888B-3 & 888B-4)

   The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888B-4 are 48.5 x 21.5 x 38 to 28 inches with a ground clearance of 3 inches. The turning radius is 50 inches. The frame on both models disassembles for transport. Both models come in burgundy or blue. CONTROLS: Controls are mounted on a tiller on both models. RWD: Both models are rear-wheel drive. SEAT: The padded captain's seats have headrests. Model 888B-4 has sliding seat rails. The seat height adjusts from 21 to 23 inches on model 888B-3 and from 22 to 24 inches on model 888B-4. ARMRESTS: Adjustable flip-up armrests on model 888B-3 and flip-up armrests on model 888B-4. BRAKES: Electronic brakes. WHEELS: Model 888B-3 is a three-wheeled model. Model 888B-4 is a four-wheeled model. OPTIONS: Sun shade, rear view mirror, front mesh basket, rear wire basket, cane holder, walker holder, armrest carrying bag, and more. POWER: Uses 12-volt batteries. SPEEDS: 0 to 5 miles per hour with a travel range of up to 25 miles per battery charge and a climbing angle of 8 degrees for both models. CAPACITY: 300 pounds. WEIGHT: Model 888B-3 weighs 110 pounds without batteries and model 888B-4 weighs 130 pounds without batteries. The heaviest part when disassembled on model 888B-3 weighs 41 pounds and 42 pounds on model 888B-4. The seat weighs 24 pounds on both models.

10. SPINNER KNOB (MODEL 3520B,3520G & 3520W)

    The Spinner Knob, model 3520B, 3520G, and 3520W, is a steering wheel spinner designed for use by individuals who use driving hand controls or who have upper extremity disabilities. Designed to assist drivers turn the steering wheel, this device presses firmly against the palm of the hand offering added strength and control for ease in driving. COLORS: Black (Model 3520B, gray(Model 3520G, or woodgrain (3520W).

11. STEERING CONTROL HOOK GRIP (MODEL 3521)

    The Steering Control Hook Grip, model 3521, is a spinner ring designed for use by individuals who use a two-finger prosthetic hook when driving. The device attaches to a bar mounted on the steering wheel in a ball bearing spinner receptacle. To secure the steering wheel for ease in handling, the user places one finger on the outside of the spinner ring while postioning the other finger on the inside.

12. STEERING CONTROL PALM GRIP (MODEL 3523)

    The Steering Control Palm Grip, model 3523B, is a steering wheel spinner designed for use by individuals who use driving hand controls or who have upper extremity disabilities. This lightweight aluminum wrap adjusts to fit the hand and offers a firm strength that holds the shape for secure steering control, and a raised finger rest protects the fingers from contact with the steering wheel. Other features includes a soft sheepskin liner that protects the hands and provides warmth in winter.

13. STEERING CONTROL TRI-PIN GRIP (MODEL 3522)

    The Steering Control Tri-pin Grip, model 3522, is a steering spinner bar designed for use on vehicles with power steering for persons with no tensor control in the wrist. This device is a three-pin grip designed to comfortably position and secure the hand and wrist on the steering wheel. The pins are lightweight and adjustable, and attaches across the diameter of the steering wheel. An available counter weight diminishes the weight of the grip so that it can be mounted on either side of the steering wheel. A replaceable foam cover is included for extra comfort.

See Mobility Express products that are no longer available.