MobilityWorks

810 Moe Drive
Akron, Ohio 44310
United States
Telephone: 877-275-4930 or 330-633-1118.
Fax: 330-633-0330.
Web: http://www.mobilityworks.com.
Email: ask@mobilityworks.com.

Products manufactured by MobilityWorks (listed alphabetically)

1. MOBILITYWORKS ULTRA WHEELCHAIR VAN

   The MobilityWorks Ultra Wheelchair Van is a van conversion designed for use by indviduals with mobility disabilities or spinal cord injury. The conversion is a full-sized lowered floor van built on the Ford E150-Series or E-250 Series chassis. Standard features include two front captain chairs, manual bi-fold sofa with drink holders and three-point safety restraints, deep-tint vista windows, polyurethane foam floor with high-traffic cobblestone carpet, high output rear air conditioning and heat, and 12-volt outlets in the center and rear. OPTIONS: Side-entry Braun or Ricon wheelchair lift or ramp; power doors; hand controls; docking stations; raised roof and doors; DVD/sound system; power slide and recline sofa. WARRANTY: 3-year or 36,000 mile warranty on all components. DELIVERY TIME: 1 to 3 weeks.

Products distributed by MobilityWorks (listed alphabetically)

1. BRUNO TURNING AUTOMOTIVE SEATING (TAS) 2400 & 2400E PACKAGE

   The Bruno Turning Automotive Seating (TAS) 2400 Turnout is a swivel seat base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The Turnout is installed on a vehicle-specific custom base plate assembly. The swivel base is engineered for ease of installation and use. The seat pivots out and over the door still and is available for both the driver and the passenger side. The 2400 has manual turnourt and the 2400E has powered turnout. Both packages include the Turnout, Bruno LP series fabric-upholstered seat without armrests, seat slider, and base plate assembly. OPTIONS: Armrest with adjustable angle and height and leather upholstery. CAPACITY: The 2400 has a 450-pound capacity and the 2400E has a 300-pound capacity.

2. BRUNO TURNING AUTOMOTIVE SEATING (TAS) 2500 TURNY

   The Bruno Turning Automotive Seating (TAS) 2500 Turny is a powered turning automotive seat base designed for use by individuals with severe physical disabilities and mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The Turny replaces the existing seat base with a swivel, power up and down base. It allows for an even height transfer from a mobility device or can be lowered to 12 or 16 inches. The base swivels manually. The hand control first glides the seat out of the vehicle then lowers the seat. The Turny can be installed in the front passenger and the middle-side door position on both the left and the right. It can be removed to restore the vehicle to its original condition. In some cases the Turny utilizes the original seat. The Bruno SM seat and LP series seat provide lumbar support as well as lateral support in both the seat cushion and backrest. OPTIONS: Can be installed on the driver's side of the vehicle with the addition of the Bruno Seat Slider Kit (available for Bruno SM seat only). CAPACITY: 330 pounds.

3. BRUNO TURNOUT TURNING AUTOMOTIVE SEATING (MODEL TAS-2400/2400E)

   The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle. DIMENSIONS: The rear wheels are 12.5 inches in diameter and the frame is 4.5 inches. OPTIONS: Carony Transportation System allowing the user to slide directly from the swivel seat to a transport wheelchair base. CAPACITY: 450 pounds (manual model) or 300 pounds (powered model).

4. CAR-GO-MATE SCOOTER LIFT (MODELS FLC-0800-S & FLC-0800-SB)

   The Car-Go-Mate Scooter Lift is a hitch mounted scooter lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This exterior scooter lift installs on vehicles with a Class I or Class II 1.25-inch hitch receiver, and can handle scooters with a maximum width of 24.5 inches and a maximum wheelbase of 32 inches. The lift automatically clamps the scooter to the lift platform. It has a lifting range of 28 inches and a locking arm adjustment range of 3.5 to 7.5 inches. It has a low profile to reduce rear vision obstruction. POWER: Model FLC-0800-SB comes with a mobile power pack. DIMENSIONS: The height from the hitch is 42.5 inches; maximum lift depth from the column is 30 inches; clearance from the hitch to column is 9.5 inches. WEIGHT: The lift weighs 70 pounds; the mobile power pack weighs 14 pounds; the swing away weighs 35 pounds. CAPACITY: 150 pounds. WARRANTY: Limited lifetime warranty.

5. CAR-GO-MATE WHEELCHAIR LIFT

   The Car-Go-Mate Wheelchair Lift is a hitch-mounted wheelchair carrier designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This exterior wheelchair lift installs on vehicles with a Class I or Class II 1.25-inch hitch receiver to hold manual wheelchairs. The wheelchair is automatically clamped to the lift platform, which folds and unfolds with the assistance of a gas-spring counterbalance. The lift is set low to reduce rear vision obstruction. The lifting range is 28 inches, and the lift can carry wheelchairs with a maximum 30 inch arm height and maximum 14.5 inch folded wheelchair width. DIMENSIONS (LxW): Platform is 17 x 31.75 inches. Maximum overall lift depth is 30 inches. Clearance from hitch to column is 9.5 inches. Overall height from hitch is 42.5 inches. WEIGHT: The lift weighs 50 pounds; the mobile power pack weighs 8 pounds; the swing-away weighs 35 pounds. CAPACITY: 100 pounds. WARRANTY: Limited, non-prorated, non-transferable lifetime warranty.

6. CURB-SIDER (MODEL VSL-6000)

   The Curb-Sider, model VSL-6000, is a trunk-mounted wheelchair alternative loader for persons with physical disabilities needing to transport power wheelchairs or scooters. This fully-powered lift fits most types of vehicle, including minivans, SUVs, CUVs, pickup trucks, and full-size vans. It is available for either the passenger or driver side, and its offset arm can pick up wheelchairs or scooters from the rear of the vehicle, from the rear corner, or from the side of the vehicle (near the rear wheel). CAPACITY: 400 pounds.

7. ENTERVAN

   Entervan is a wheelchair accessible Chrysler minivan with remote control automatic operation of door, folding ramp, and kneeling functions. The van's seating arrangement includes a quick-disconnect driver and front passenger seat as well as a rear-mounted bench seat. There are three securement positions, and a wheelchair and occupant belt system.

8. EQUALIZER VAN LIFT (MODELS FLC-0300-M25, FLC-0300-M40, FLC-0300-P25, FLC-0300-P40, FLC-0300-E25, & FLC-0300-E40)

   The Equalizer Van Lift is a van or pickup truck wheelchair lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This powered lift adapts to most mini-vans, full sized vans, SUVs and pickup trucks, and fits other specialty vehicles such as the Chrysler PT Cruiser. It has a rotation range of 200 degrees. Equalizer 1 (FLC-0300-M25, FLC-0300-M40) is a power lift with manual rotation. Equalizer 2 (FLC-0300-P25, FLC-0300-P40) is a power lift with powered rotation. Equalizer 3 (FLC-0300-E25, FLC-0300-E40) is a powered lift with powered rotation and a powered boom extension. DIMENSIONS: The maximum lifting height is 68 inches. Within the vehicle, the maximum lifting height is 27 to 35 inches at 1-inch increments. The overall lift height is 30 inches for models FLC-0300-M25, FLC-0300-M40, FLC-0300-P25, and FLC-0300-P40 or 31 inches for models FLC-0300-E25, FLC-0300-E40. Powered boom length is 21.5 to 33.5 inches. WEIGHT: Lift is 88 pounds on models FLC-0300-M25 or FLC-0300-M40 or 98 pounds for models FLC-0300-P25, FLC-0300-P40, FLC-0300-E25, and FLC-0300-E40. CAPACITY: 250 pounds on models FLC-0300-M25, FLC-0300-P25, and FLC-0300-E25 or 400 pounds for models FLC-0300-M40, FLC-0300-P40, and FLC-0300-E40.

9. RAMPVAN INFLOOR

   Rampvan Infloor is a van conversion with ramp designed for use by individuals with mobility disabilities or spinal cord injury. This van conversion is available with a Toyota Sienna, Chrysler Town & Country, or Dodge Grand Caravan chassis. The conversion features a 9.75-inch drop floor and a power ramp that stows completely under the floor of the cabin, leaving the passenger door accessible for other passengers to enter and exit the van. Other standard features include a power passenger sliding door; a powder-coated non-slip ramp surface; interchangeable quick-release front seats; door and ramp activation switches located on the dashboard and door post, activated by magnetic key chain fob or remote control; automatic system to detect ramp obstructions and reverse deployment; emergency manual operation; low ramp angle; multi-position wheelchair tie-downs; custom interior; and exterior accents. CAPACITY: 750 pounds for the ramp. DIMENSIONS: Ramp platform is 30 inches wide.

10. TAILGATER PICK-UP TRUCK LIFT (MODELS FLC-0300-T25 & FLC-0300-T40)

    The Tailgater Pick-Up Truck Lift is a wheelchair or scooter loader for pick-up trucks designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This powered lift with motorized rotation and a powered boom extension enables a power chair or scooter to be lifted from the cargo area of a pick-up truck and positioned beyond the lowered tailgate or next to the truck. Adjustable limit switches automatically stop rotation to prevent lift contact with the vehicle. Variable column height, arm adjustments, and an adjustable base assure custom fit. DIMENSIONS: Minimum overall height is 34 inches; the powered boom length is 30.5 to 42.5 inches. The maximum lifting height is 68 inches (30 to 38 inches within the vehicle at 1-inch increments. CAPACITY: 250 pounds on model FLC-0300-T25 or 400 pounds on model FLC-0300-T40. WEIGHT: 113 pounds. WARRANTY: Limited lifetime warranty.

11. TRACKER INSIDE LIFT

    The Tracker Inside Lift is a scooter and wheelchair loader designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift has a drive-on lifting platform for power chairs and scooters, with two docking system options, the Dock 'N' Lock positive self-guiding manual release docking system and a strapping system. Once the power chair or scooter has been secured to the lifting platform, it is lifted and stowed inside the vehicle's cargo area. This lift fits in most minivans. A high threshold kit allows it to be installed in vehicles with raised cargo opening thresholds (for example, Dodge Grand Caravan) without altering the vehicle. POWER: Uses 12-volt direct current motor with power from vehicle or 12-volt on-board battery pack; 110 volt charger included. OPTIONS: Wireless remote. DIMENSIONS (LxW): Lift platform is 27 x 47 inches. The maximum travel distance from vehicle cargo floor to ground is 29 inches for the standard configuration and 27 inches for the high threshold configuration. WEIGHT: 181 pounds. CAPACITY: 325 pounds. WARRANTY: Limited lifetime warranty.