All In One Mobility, Inc.

12833 NE Airport Way
Portland, Oregon 97230
United States
Telephone: 800-944-4935 or 503-255-5005.
Fax: 503-255-5010.
Web: http://www.allinonemobility-shop.com.
Email: sales@allinonemobility.com.

Products distributed by All In One Mobility, Inc. (listed alphabetically)

1. AUTOMATIC POWER CHAIR LIFT (MODEL AL550)

   The Automatic Power Chair Lift, model AL550, is a platform van lift designed for use by individuals with mobility disabilities or spinal cord injury. The lift's docking station features a self-aligning base, enabling the user to drive onto the platform and be locked in place. An audible latching sound is heard as the chair's pin passes into the locking mechanism, and attempting to back the chair verifies that the latch is locked. The docking base also includes a bright colored indicator pin to confirm the latch is in the locked position. When unloading, the powered chair is released using a single lever located at the front of the base. The lift fits class II or III hitches and folds manually. POWER: Uses battery and supplied electrical harness with full-length leads that attach directly to the battery. DIMENSIONS: 28.5 X 39 INCHES. CAPACITY: 350 pounds. WEIGHT: 112 pounds. WARRANTY: Three year transferable warranty.

2. BRUNO BIG LIFTER (MODEL VSL-570)

   The Bruno Big Lifter, model VSL 570, is a wheelchair and scooter loader designed for use at the rear of minivans, sport utility vehicles, and full size vans. The Big Lifter's manual swing has a low-resistance design, requiring minimum strength. Installation requires no structural modification. The adjustable low-profile arm allows the placement of larger power bases into smaller vehicle openings. A Bruno Custom Base provides for mounting the lift in the appropriate location. POWER: Big Lifter is powered by the vehicle's battery. CAPACITY: 400 pounds.

3. BRUNO ELECTRA-RIDE II (MODEL SRE-1550)

   The Bruno Electra-Ride II is a straight rail interior seat lift designed for individuals with mobility disabilities and cognitive disabilities. The Electra-Ride II can be installed on either side of the stairway. There is a final end stop bumper at each end of rail. Adjustable speed control up to 32 feet per minute; actual loaded top speed is 28 feet per minute. SEAT: The seat width adjusts from 16 to 20 inches between the armrests, and the seat depth is 14 inches. The seat rotates, locking at 0, 45 and 90 degrees, and it will only lock and unlock at the top and the bottom of the stairway. The seat folds when not in use, and is equipped with a folding footplate; footrest and carriage safety switches; two armrests that swing out for easy transfer; and a retractable seatbelt. The seat height is adjustable. Custom seating and seat coverings are available. POWER: Two 12-volt batteries, continuously charged by a state-of-the-art battery charger that plugs into a 110-volt household outlet. Uses 24-volt 1.02 horsepower DC motor with a 20:1 right angle self locking worm drive. In case of power outage, the unit will have between 8 and 20 round trips on a battery charge. DIMENSIONS: Rail width is 7.5 inches and folded width is 15 inches. Standard track lengths of 16 and 20 feet are available but can be cut by dealer or installer to actual length of stairway. OPTIONS: Custom length rails up to 50 feet; large seat; overspeed safety brake. Commercial package includes overspeed safety brake, two keyed remote call/send controls, and a keyed rocker switch on the chair. WEIGHT: 300 pounds without rider in typical 16-foot installation. CAPACITY: 350 pounds.

4. BRUNO ELECTRA-RIDE LT (MODEL SRE-2700)

   The Bruno Electra-Ride LT, model SRE-2700, is a straight rail interior seat lift designed for use by individuals with mobility disabilities and cognitive disabilities. The LT has a rack and pinion drive system will sense and automatically stop when obstacles are encountered. The seat and arms of the carriage flip up out of the way when the unit is not in use. The swivel seat locks for getting on or off. The rocker switch control is conveniently located at the end of the arm rest. The two wireless call/send controls require no wires running along the wall. Rails install to within 10 inches of the wall and can be installed on either side of the stairway. POWER: Two 12-volt batteries, continuously charged by the power supply of house hold outlet. DIMENSIONS: The standard track length is 16 feet or 20 feet. CAPACITY: Maximum rider weight is 275 pounds.

5. BRUNO OFFSET SPACE-SAVER (MODEL ASL-350)

   The Offset Space-Saver, model ASL-350, is a trunk-mounted scooter loader designed to load a partially assembled three-wheel scooter in the trunk of a car. The offset design of the lift arm allows the user to position the scooter inside narrow trunk openings. All controls are located on top of the lift arm. The unit disassembles with three steps and can be stored in the vehicle or in the trunk. When an additional tower base assembly is ordered, the loader can be used in more than one vehicle. CAPACITY: Up to 180 pounds.

6. BRUNO TURNING AUTOMOTIVE SEATING (TAS) 2400 & 2400E PACKAGE

   The Bruno Turning Automotive Seating (TAS) 2400 Turnout is a swivel seat base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The Turnout is installed on a vehicle-specific custom base plate assembly. The swivel base is engineered for ease of installation and use. The seat pivots out and over the door still and is available for both the driver and the passenger side. The 2400 has manual turnourt and the 2400E has powered turnout. Both packages include the Turnout, Bruno LP series fabric-upholstered seat without armrests, seat slider, and base plate assembly. OPTIONS: Armrest with adjustable angle and height and leather upholstery. CAPACITY: The 2400 has a 450-pound capacity and the 2400E has a 300-pound capacity.

7. BRUNO TURNING AUTOMOTIVE SEATING (TAS) 2500 TURNY

   The Bruno Turning Automotive Seating (TAS) 2500 Turny is a powered turning automotive seat base designed for use by individuals with severe physical disabilities and mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The Turny replaces the existing seat base with a swivel, power up and down base. It allows for an even height transfer from a mobility device or can be lowered to 12 or 16 inches. The base swivels manually. The hand control first glides the seat out of the vehicle then lowers the seat. The Turny can be installed in the front passenger and the middle-side door position on both the left and the right. It can be removed to restore the vehicle to its original condition. In some cases the Turny utilizes the original seat. The Bruno SM seat and LP series seat provide lumbar support as well as lateral support in both the seat cushion and backrest. OPTIONS: Can be installed on the driver's side of the vehicle with the addition of the Bruno Seat Slider Kit (available for Bruno SM seat only). CAPACITY: 330 pounds.

8. BRUNO TURNOUT TURNING AUTOMOTIVE SEATING (MODEL TAS-2400/2400E)

   The Bruno Turnout Turning Automotive Seating, model TAS-2400/2400E, is a swivel base designed for use by individuals with mobility disabilities who have difficulty getting in and out of a car or minivan. The unit is installed on a vehicle-specific custom base plate assembly and is available in a manual (TAS-2400) or powered (TAS-2400E) model. The seat rotates out over the doorsill, bridging the gap for a safe transfer onto the seat. Once the user is on the seat, it rotates back into the vehicle. DIMENSIONS: The rear wheels are 12.5 inches in diameter and the frame is 4.5 inches. OPTIONS: Carony Transportation System allowing the user to slide directly from the swivel seat to a transport wheelchair base. CAPACITY: 450 pounds (manual model) or 300 pounds (powered model).

9. COVERED OUTSIDE LIFT (MODEL AL3000)

   The Covered Outside Lift, model AL3000, is a hitch-mounted scooter or powered wheelchair carrier designed for use by individuals who use wheelchairs. The plastic watertight cover keeps power chairs and scooters safe while the spring-assisted operation makes the cover easier to open and close. The carrier can be mounted on a class II or III trailer hitch and includes an integrated license plate mount. OPTIONS: Swing-away option. CAPACITY: 350 pounds. WARRANTY: Three-year transferable warranty.

10. ELITE G2

    The Elite G2 is a scooter or wheelchair loader for a van designed for use by individuals with mobility disabilities. This loader features a keychain remote control, a drive on/drive off platform, and quick cycling efficiency. DIMENSIONS: The platform is 44 x 27.5 inches. Stowed, the lift is 50 x 44 x 29.5 inches. CAPACITY: 350 pounds. WEIGHT: 200 pounds. COLOR: Available in five colors.

11. EXCEL & EXCEL COMPACT

    The Excel & Excel Compact are wheelchair or scooter loaders vans designed for use by individuals with mobility disabilities. This boom lift features a wireless keychain remote control. DIMENSIONS: The vertical reach is 35.5 inches and the boom length is 38.25 inches on both models. The total height for the Excel is 39.25 inches and 31.75 inches for the Excel Compact. CAPACITY: 350 ponds on both models. WEIGHT: The installed weight for the Excel is 66 pounds and 64 ponds for the Excel Compact.

12. EXCEL 200

    The Excel 200 is a scooter or wheelchair loader designed for use by individuals with mobility disabilities. With five adjustments available to the dealer, this lift fits in most SUVs, minivans, station wagons, and the PT Cruiser and accommodates most scooters and lightweight powered wheelchairs. This lift offers both rear and curbside loading and the dual positioning base makes installationpossible on either the passenger or the driver's side of the rear cargo area. The Excel 200 lifts the power chair or scooter automatically and has a simple manual in and out rotation. DIMENSIONS: Maximum vericla reach is 32.5 inches and the total height is 32.5 inches. CAPACITY: 200 pounds. WEIGHT: The installed weight is 200 pounds.

13. EXCEL E & EXCEL E COMPACT

    The Excel E & Excel E Compact are wheelchair or scooter loaders vans designed for use by individuals with mobility disabilities. This manual swing boom lift features push-button controls and adjustable locking "stops." DIMENSIONS: The vertical reach is 35.5 inches and the boom length is 38.25 inches on both models. The total height for the Excel is 39.25 inches and 31.75 inches for the Excel Compact. CAPACITY: 350 ponds on both models. WEIGHT: The installed weight for the Excel is 54 pounds and 52 pounds for the Excel Compact.

14. EZ-ACCESS MODULAR RAMP

    The EZ-ACCESS Modular Ramp is a modular ramp designed for use by individuals who use wheelchairs or scooters or who cannot use stairs. The ramp and handrails are made of aluminum, and the ramp has a non-skid surface. The components can be assembled in several configurations that comply with ADA guidelines, including a straight ramp, two sections connected with a 90-degree turn, and two sections connects with a 180-turn. Handrails can be installed on both sides of the ramp in all configurations. No anchoring into concrete footings or pads is required. Bottom and top transition plates are included. OPTIONS: Semicircular loops to connect the ends of a pair of handrails on one side of a ramp or ramp section. DIMENSIONS: Ramp components are available in lengths of 4, 6, 8 and 10 feet. The standard width is 3 feet. Custom lengths and widths are available. Turning landings are available in 4 x 5 feet and 5 x 5 feet. The ramp and platform supports can be raised and lowered in 1-foot increments. CAPACITY: 850 pounds. WARRANTY: 3-year limited warranty.

15. EZ-ACCESS ROLLUP RAMP

    The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 inches and a width of 30 inches. WEIGHT: 16 pounds. CAPACITY: 600 pounds. WARRANTY: 3-year limited warranty.

16. EZ-ACCESS SUITCASE RAMP (MODELS 2, 3, 4, 5 & 6)

    The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches (model 3); 48 x 29 inches (model 4); 60 x 29 inches (model 5); and 72 x 29 inches (model 6). Folded, the ramps are (HxLxW): 3 x 24 x 15 inches (model AS2); 3 x 36 x 15 inches (model AS3); 3 x 48 x 15 inches (model AS4); 3 x 60 x 15 inches (model AS5); and 3 x 72 x 15 inches (model AS6).CAPACITY: 800 pounds (all models). WEIGHT: 11 pounds (model AS2); 15 pounds (model AS3); 21 pounds (model AS4); 26 pounds (model AS5); and 36 pounds (model AS6). WARRANTY: 3-year limited warranty.

17. EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8)

    The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and when folded, the ramp has a built-in nylon carrying handle. OPTIONS: A Top Lip Extension (TLE) increases the standard 3-inch top lip to 9 inches, allowing the ramp to clear the bumper of SUVs and minivans. The TLE is sold in pairs with each piece fastening to one half of the ramp. DIMENSIONS (LxW): 24 x 30 inches (model SS2); 36 x 30 inches (model SS3); 48 x 30 inches (model SS4); 60 x 30 inches (model SS5); 72 x 30 inches (model SS6); 84 x 30 inches (model SS7); and 96 x 30 inches (model SS8);. Folded (HxLxW): 3.75 x 24 x 15 inches (model SS2); 3.75 x 36 x 15 inches (model SS3); 3.75 x 42 x 15 inches (model AS4); 3.75 x 48 x 15 inches (model SS5); 3.75 x 60 x 15 inches (model SS6); 3.75 x 74 x 15 inches (model SS7); 3.75 x 86 x 15 inches (model SS8). Top Lip Extension (TLE) (HxLxW): 2.375 x 13.875 x 8.5 inches for each piece. CAPACITY: 800 pounds (all models). WEIGHT (per ramp section): 11 pounds (model SS2); 17 pounds (model SS3); 23 pounds (model SS4); 29 pounds (model SS5); 34 pounds (model SS6);41 pounds (model SS7); and 47 pounds (model SS8). WARRANTY: 3-year limited warranty.

18. HOYER BATHLIFT (MODELS CHBL1 & CHBL2)

    Jack type hydraulic lift device, user or attendant operated, clamps on edge of bath tub. C1 commode type seat, or C2 fiberglass bucket seat. No armrests. Optional floor mount available. CAPACITY: 250 pounds.

19. INVACARE TDX SP REHAB SEAT POWER WHEELCHAIR

    The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor-to-seat heights at zero degrees are 16.5, 18.5 and 20.5 inches. For floor-to-seat height at 5 degrees, add one-half inch to each measurement. The back angle is adjustable from 85 to 105 degrees. CASTERS: 6 x 2 inch flat-free front and rear casters. WHEELS: 14 x 3 inch center drive wheels. POWER: Uses two 22NF batteries. SPEEDS: 6 miles per hour. CAPACITY: 300 pounds. WEIGHT: 264 pounds with batteries, 166 pounds without batteries. WARRANTY: Lifetime warranty on the base frame; seat frame, 36 months; electronics, 12 months; motor/gearbox, 18 months.

20. KNEELVAN

    Kneelvan is a mini van with ramp designed for use by individuals with mobility disabilities or spinal cord injury. This van is a conversion of the Dodge Grand Caravan, Ford Windstar, or Chrysler Town & Country minivan, featuring a rear opening ramp and standard hydraulic kneel-down. Available interior configurations include: two bucket seats in the middle row on either side of the wheelchair, with a two-person fold-down bench that folds up when not needed in the back row; remounting the original factory rear bench in the middle row and placing the wheelchair in the back row; or placing a powered transfer seat in the middle row to allow the wheelchair user to transfer to the driver's seat. The van is available in a version with a standard wheelbase that carries one wheelchair, or a long wheelbase version that can carry two wheelchairs, depending on wheelchair size. The van comes with four point wheelchair restraints. Carpeting is standard and commercial-grade non-slip flooring is available. DIMENSIONS (HxLxW): Interior is 56 (Chrysler) or 57.5 (Ford Windstar) x 91 (Dodge with long wheelbase) or 76 (Dodge or Ford with standard wheelbase) x 31 inches. Entrance height is 53.5 inches (Standard) or 56 inches (ADA/Commercial).

21. LIBERATOR PLUS TRUNK LIFT (MODEL FLC-2000-HDAB)

    The Liberator Plus Trunk Lift, model FLC-2000-HDAB, is a trunk mounted scooter or power wheelchair loader designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This heavy duty lift is constructed of welded steel with a powder coated finish, and comes with an adjustable reinforced deck base that bolts to the trunk or cargo area floor in a car, van, or SUV. It has a motorized lifting strap with a manual boom swing and hand held push button controls, and can lift power chairs and scooters with the seat on or off. It disassembles into separate components that can be stored individually. POWER: Uses 12-volt direct current motor powered by vehicle. DIMENSIONS: Column height is 32 inches; the boom adjustment range is 27 to 35 inches; the base length adjustment range is 15.5 to 26.5 inches. WEIGHT: 41.5 pounds; the heaviest component is 19.5 pounds. CAPACITY: 400 pounds. COLOR: Black. WARRANTY: Limited lifetime warranty.

22. PORTABLE POWER LIFTS 9700 SERIES (MODELS 9700 & 9701)

    The Portable Power Lifts 9700 Series are hydraulic and powered transfer lifts designed to offer stability and assist caregivers of individuals who have difficulty making independent transfers. These lifts are completely adjustable to fit needs of all users. Each lift has a wide base leg stance for greater stability and they lock in open position for added safety. The height adjusts for all bed sizes and accomodates low tubs. The padded swivel bar offers 360 degree rotation and the six hook design adapts to various sling styles and positions such as reclining or upright. Both lifts disassemble easily for storage and transporting. Model 9701 is battery operated and offers maximum protection against back strain for caregivers. It has a quiet motor that charges over night, with an audible alarm to signify charge. Model 9700 is a hydraulic lift that uses a pump mechanism which allows transfer with minimal effort. The color coded, chain-free slings are made of polyester mesh fabric with selected features such as built in head rest, padded leg sections, or large cut hammock style. POWER: Model 9701 is battery powered. Model 9700 is pump operated. OPTIONS: A number of slings are available including Universal Sling, Hammock Sling and Hammock Sling with Commode Opening. A digital scale and bracket can each be purchased separately. DIMENSIONS: Base Height (clearance) is 3.5 inches. Boom height ranges from 67.5 to 18.5 inches for model 9700 and from 66 to 17 inches for model 9701. Folded height for both is 16.5 inches. Both models have an open base width of 42 inches and closed width of 24.5 inches. CAPACITY: Model 9700 lifts up to 375 pounds. Model 9701 lifts up to 300 pounds. WEIGHT: Approximately 78-79 pounds. WARRANTY: One year on battery or pump. Three years on lifts.

23. PRONTO M9I POWER WHEELCHAIR

    The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The van-style seat is available in semi-recline, full-recline, and adjustable back. The semi-recline seat has a width of 18 inches to 22 inches, depth of 16 inches to 18 inches, and a back height of 18 inches with an adjustable back angle of 80 degrees to 115 degrees. The full-recline seat has a width of 18 inches to 22 inches, a depth of 18 inches to 20 inches, and a back height of 21 inches and a back angle of 80 degrees to 180 degrees. Theadjustable back seat has a seat width of 16 inches to 24 inches, a depth of 16 inches to 22 inches, and a back angle of 80 degrees to 100 degrees. CUSHION: A rehab seat is available for individuals with positioning needs. UPHOLSTERY: The van seat is available in grey cloth or vinyl and tan vinyl. ARMRESTS: Flip-up adjustable height and width arms. BRAKES: Regenerative braking and automatic motor locks. CASTERS: Front and rear casters are 6 inches x 1.3 inches. WHEELS: Drive wheels are 14 inches x 3 inches. POWER: Battery-powered 650-watt, high torque motor. An on-board charger is standard. SPEEDS: Maximum speed is 6.5 miles per hour with a 9 degree incline capability. The chair climbs curbs up to three inches. CAPACITY: 300 pound weight capacity with a 400 pound option. WEIGHT: 258 pounds with battery and 183 pounds without battery. WARRANTY: Base frame and seat frame have warranties for 60 months; the electronics for 12 months; and motor/gearbox for 18 months.

24. PT DRIVER & PT RIDER

    The PT Driver or PT Rider is a minivan with ramp designed for use by individuals with mobility disabilities or spinal cord injury. This is a converted PT Cruiser with a lowered floor, a side-entry ramp, and click-in driver or passenger seats. The van comes with four-point wheelchair restraints and carpeting; commercial-grade non-slip flooring is available. DIMENSIONS (HxLxW): Interior is 56 x 48 x 29.5 inches. The ramp is (LxW) is 32.5 x 44 inches. The door opening height is 50 inches.

25. Q STRAINT POCKET SYSTEM (MODEL Q-5001)

    The Q'Straint Pocket System, model Q-5001, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. The belts have bear clamps to adjust length and hooks to attach to frame of wheelchair and to floor pockets located in the floor of the vehicle. Lap and shoulder belts secure the occupant in the wheelchair. The complete system includes two rear belts, two front belts, , one shoulder belt, one lap belt, one shoulder belt bracket assembly, four floor pocket assemblies, one warranty card, one driver instruction guide, one installation instruction, and one adhesive instruction label. OPTIONS: Floor riser. WARRANTY: One year warranty.

26. Q'STRAINT SYSTEM (MODEL Q-5001-T)

    The Q'Straint System, model Q-5001-T, is a wheelchair restraint system designed to secure wheelchairs and their occupants in vehicles. This model can be mounted on heavy-duty, floor-mounted aluminum L track (available with or without flange; not included), wheelchair tie-down straps, and occupant shoulder and lap belts. The complete system includes two rear belts, two front belts, one lap belt, one shoulder belt, one driver instruction guide, one instruction adhesive label, and one warranty card. OPTIONS: Q'Straint track and hardware.

27. TAILGATER PICK-UP TRUCK LIFT (MODELS FLC-0300-T25 & FLC-0300-T40)

    The Tailgater Pick-Up Truck Lift is a wheelchair or scooter loader for pick-up trucks designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This powered lift with motorized rotation and a powered boom extension enables a power chair or scooter to be lifted from the cargo area of a pick-up truck and positioned beyond the lowered tailgate or next to the truck. Adjustable limit switches automatically stop rotation to prevent lift contact with the vehicle. Variable column height, arm adjustments, and an adjustable base assure custom fit. DIMENSIONS: Minimum overall height is 34 inches; the powered boom length is 30.5 to 42.5 inches. The maximum lifting height is 68 inches (30 to 38 inches within the vehicle at 1-inch increments. CAPACITY: 250 pounds on model FLC-0300-T25 or 400 pounds on model FLC-0300-T40. WEIGHT: 113 pounds. WARRANTY: Limited lifetime warranty.

28. TRACKER INSIDE LIFT

    The Tracker Inside Lift is a scooter and wheelchair loader designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lift has a drive-on lifting platform for power chairs and scooters, with two docking system options, the Dock 'N' Lock positive self-guiding manual release docking system and a strapping system. Once the power chair or scooter has been secured to the lifting platform, it is lifted and stowed inside the vehicle's cargo area. This lift fits in most minivans. A high threshold kit allows it to be installed in vehicles with raised cargo opening thresholds (for example, Dodge Grand Caravan) without altering the vehicle. POWER: Uses 12-volt direct current motor with power from vehicle or 12-volt on-board battery pack; 110 volt charger included. OPTIONS: Wireless remote. DIMENSIONS (LxW): Lift platform is 27 x 47 inches. The maximum travel distance from vehicle cargo floor to ground is 29 inches for the standard configuration and 27 inches for the high threshold configuration. WEIGHT: 181 pounds. CAPACITY: 325 pounds. WARRANTY: Limited lifetime warranty.

29. ULTRA TWIN FREESPAN

    The Ultra Twin Freespan Traverse is a powered overhead bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This freestanding rail system is specially designed to lift heavy patients in combination with the Likorall or Multirall (see separate entries)lift motor. This unit is adjustable to four different heights, and is available in eight different rail lengths. Equipped with locking handles on the lift rail, theFreeSpan can also be widened in each corner. This lift can be lowered to the transport position to simplify mounting of the lift motor and/or moving the lift system to another room. It has lockable wheels, is made of aluminum and is designed to be both lightweight and stable. OPTIONS: A variety of lifting and sling options is available. DIMENSIONS: The width adjusts from 79 to 217 inches. Adjustments at each corner allows the unit to be widened an additional 8.9 inches. CAPACITY: 1,100 pounds.

30. UNIVERSAL INSIDE LIFT (MODEL AL200)

    The Universal Inside Lift, model AL200, is a wheelchair or scooter van loader designed for use by individuals with mobility disabilities or spinal cord injury. This is a heavy-duty lifter for heavier scooters and wheelchairs. It has an adjustable base that fits most vehicles on either side, and it disassembles into three components for stowage. It has a boom range of 360 degrees. POWER: Powered by the supplied electrical harness. The harness has full-length leads that attach directly to the battery. OPTIONS: Tall post for larger automobiles (37 inch headroom required); offset post for tailgate applications. DIMENSIONS: The lifting height is 49.5 inches and requires headroom of 30 inches. CAPACITY: 350 pounds. WEIGHT: 39 pounds. WARRANTY: Three year transferable warranty.

31. UNIVERSAL INSIDE-OUT LIFT (MODEL AL065)

    The Universal Inside-out Lift, model AL065, is a wheelchair or scooter van loader designed for use by individuals with mobility disabilities or spinal cord injury. This Class II or III hybrid mounts outside the vehicleand puts the scooter or chair inside, using a boom with a range of 100 degrees. The loader features weather resistant construction and a selection of docking devices for every scooter or chair. POWER: Uses battery and supplied electrical harness with full-length leads that attach directly to the battery. DIMENSIONS: The device has a lifting height of up to 44 inches. CAPACITY: 200 pounds. WEIGHT: 35 pounds. WARRANTY: Three year transferable warranty.

32. UNIVERSAL SCOOTER LIFT (MODEL AL100)

    The Universal Scooter Lift, model AL100, is a hitch-mounted scooter carrier designed for use by individuals with mobility disaabilities. This outside scooter lift works with any Class II hitch-equipped vehicle with a hitch from 5 to 19 inches high, and can support a scooter with a maximum width of 28.5 inches and a maximum wheelbase of 42 inches measured from the hub (center) of the front tire to the hub of the rear tire. The deck automatically folds up, out of the way, when empty. OPTIONS: A Swing Away option provides access to the trunk or lift gate of any vehicle. POWER: Uses a battery and a supplied electrical harness with full-length leads that attach directly to the battery. DIMENSIONS (LxW): The aluminum deck is 28.5 x 39 inches. CAPACITY: 350 pounds. WEIGHT: 95 pounds. WARRANTY: Three year transferable warranty.

33. VISION

    Vision is a van conversion designed for use by individuals with mobility disabilities or spinal cord injury. This rear-entry, lowered floor modification is available on Daimler-Chrysler, Ford, and General Motors minivans. Conversion options include fully automatic entry and seating for four ambulatory passengers plus one wheelchair user, as well as all standard factory options. WARRANTY: Three years or 36,000 miles.

34. VMI FULL SIZE VAN CONVERSIONS

    The VMI Full-size Van Conversion is a van conversion designed for use by individuals who use wheelchairs. Features include lowered floor with an additional driver position drop which enables the vehicle to be driven from wheelchair or allows wheelchair to be located in front passenger position, added head room in the driver's position, driver and front passenger recessed seat belt retractors for more room to maneuver adaptive equipment in and out of front driver and passenger positions, raised roof with raised doors, fiberglass raised roof with reversed flange design, composite material door extensions to eliminate the potential for rust, and roof support structure to add structural integrity to the chassis to compensate for metal removed in raised roof and door process. OPTIONS: A variety of optional features is available. DIMENSIONS: The floor is lowered 6 inches with an additional 2 inches in the driver position. Doors are raised 10 inches.

35. VMI MINIVAN CONVERSION

    The VMI Minivan Conversion is a lowered floor van conversion desdigned for use by individuals who use wheelchairs. This conversion offers a lowered floor with a powered in-floor ramp for open, unrestricted entry and exit, as well as greater interior maneuverability. Features include a power door with manual operation, complete undercoating and rustproofing, emergency ramp release, automotive-quality interior with fully carpeted seat bases, and a manual wheelchair tie-down system. OPTIONS: Remote control entry, PowerKneel system, Power Transfer Seat, additional removable front seat base, and magnetic entry. DIMENSIONS: The floor is lowered 10 inches. WARRANTY: Three-year/36,000 mile warranty.