Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu

Switch-It Inc.

3250 Willamsburg Lane
Missouri City, Texas 77459
United States
Telephone: 800-376-9888 or 281.208.4100.
Fax: 281.208.4106.
Web: http://www.switchit-inc.com.
Email: customer.service@switchit-inc.com.

Products manufactured by Switch-It Inc. (listed alphabetically)

  1. 4 MINI BUTTON Picture of 4 MINI BUTTON

    The 4 Mini Button is pneumatic switch pad designed for use by individuals who use wheelchairs. This unit accommodates four switches (switches not included)to control power wheelchair chair seat functions and drive controls.

  2. LOW PRESSURE SIP N' PUFF SWITCH Picture of LOW PRESSURE SIP N' PUFF SWITCH

    The Low Pressure Sip N’ Puff Switch is a pneumatic switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This system allows the user to switch devices, including auxillary communication devices, on and off with a sip or puff. The switch comes with mounting hardware.

  3. OMNITILT SEAT MOTOR CONTROLLER Picture of OMNITILT SEAT MOTOR CONTROLLER

    The Omnitilt Seat Motor Controller is a pneumatic switch designed for use by individuals who use wheelchairs and are at risk of pressure sores. This device automatically changes seat positions every set interval to relieve pressure. It automatically levels the chair seat by changes in terrain, and can also be set to manual mode so the user can set permanent seat positions.

  4. PROPORTIONAL HEAD CONTROL Picture of PROPORTIONAL HEAD CONTROL

    The Proportional Head Control is a powered wheelchair controller designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This headrest-based joystick enables the user to control a power wheelchair by rotating his or her head on a headrest pad. This controller is available for P&G electronic controls.

  5. SWITCH IT OPTI-STOP Picture of SWITCH IT OPTI-STOP

    The Switch It Opti-Stop is a powered wheelchair controller designed for use by individuals who use powered wheelchairs. Intended for use with sip N’ puff controls in the latched mode, this device is used as a safety stop switch to automatically stop the wheelchair when the person driving the chair removes the tube from the mouth.

  6. SWITCH IT PLAYSTATION ADAPTER Picture of SWITCH IT PLAYSTATION ADAPTER

    The Switch It Play Station Adapter is a switch adapter designed for use by individuals with physical or mobility disabilities. This device enables a Play Station to be operated using different types of switched joysticks and button switches.

  7. SWITCH IT REMOTE COMMANDER Picture of SWITCH IT REMOTE COMMANDER

    The Switch It Remote Commander is an attendant controller designed for use by caregivers of wheelchair users. This remote device allows someone not sitting in the wheelchair to control the drive functions of the chair.

  8. SWITCH IT REMOTE STOP SWITCH Picture of SWITCH IT REMOTE STOP SWITCH

    The Switch It Remote Stop Switch is a powered wheelchair controller designed for use by wheelchair users and their caregivers. The remote stop switch enables the user to stop the chair by pressing a button. This radio frequency based unit is designed to work within a single room for a distance of up to 30 feet. OPTIONS: Key chain remotes are available.

  9. SWITCHED HEAD ARRAYS Picture of SWITCHED HEAD ARRAYS

    The Switched Head Arrays are powered wheelchair controllers designed for use by individuals with severe physical disabilities or spinal cord injury. These arrays are an arrangement of electronic sensors in a head rest designed to enable control of the functions of a power wheelchair via head movement. These systems utilize an adjustable and growable three-pad headrest with one Zero-Touch Sensor (ZTS) in each pad. As standard, the right pad turns right, left turns left and center activates forward and reverse. Available configurations include a 3 Proximity Swithch Head Array with a 1/8-inch jack for mode/reverse, a 4 Proximity Switch Head Array, a 5 Proximity Switch Head Array, a 3 Proximity Switch Head Array with fiber optics for mode/reverse, and a 3 Proximity Switch Head Array with dedicated mode and reverse fiber optics. SIZES: All arrays are available with a choice of small or large center pads. DIMENSIONS: The large pad is 5 x 5 inches and the small pad is 4 x 4 inches.

  10. TOUCH DRIVE Picture of TOUCH DRIVE

    The Touch Drive is a control switch designed for use by individuals with physical or mobility disabilities and those who use powered wheelchairs. Similar to a mouse pad on a laptop computer, the Touch Drive allows the user to drive the chair with a touch of a finger. The farther the finger touches from the center of the switch the faster the chair goes in that direction. The device is also incorporated with a mode switch. This device is available for P&G electronics.

AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by ICF Macro under Contract No. ED-04-CO-0018/0007.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.