Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu

Liberty Wheels

714 Market Street
Suite 101
Philadelphia, Pennsylvania 19106
United States
Telephone: 877-759-4335 or 267-765-1530.
Fax: 215-627-2481.
Web: http://www.libertywheels.net.
Email: info@libertywheels.net.

Products distributed by Liberty Wheels (listed alphabetically)

  1. 1000 SERIES

    Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, full length or desk length, fixed height. Arm lock, spring button release. Front rigging, swingaway footrests, swingaway elevating legrests and swingaway, elevating extended length legrests. Chrome plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced liner. Wheels: 24-inch composite with puncture proof, lightweight polymer tires, precision ground sealed bearings. Casters: 8-inch plastic mag style wheels with solid rubber tire, shielded machine bearings. Heavy duty caster fork with 5/8-inch welded stem. Push or pull toggle wheel locks. Chrome plated handrims, 21 3/8 inches diameter. Overall length: 31 1/2 inches. Overall width: 23 1/2 to 25 1/2 inches. Weight: 39 to 56 pounds. See separate entry for accessories for Invacare 200 series.

  2. 1000E SERIES

    Manual drive wheelchair, folding. Adult sizes, seat widths, 16 or 18 inches. Seat depth, 16 inches. Back height, 16 inches. Two frame types: FF fixed arm, fixed footrest; SA swingaway with permanent arms (08), full length removable arms (18) or desk length removable arms (28). Chrome-plated carbon steel frame and crossbrace. Push handles with vinyl handgrip. Flame retardant vinyl upholstery with reinforced lining. Twenty-four inch spoked wheels, solid rubber tires. Eight inch plastic mag style wheel, solid rubber tires, shielded machine bearings. Heavy duty caster fork with 5/8-inch welded stem. Push or pull toggle wheel locks. Chrome plated handrims, 21 3/8 inches diameter. Overall length: 40 1/2 to 41 inches. Overall width: 22 1/2 to 24 1/2 inches. Weight: 42 to 44 accessories not available on 1000E series.

  3. 3G ARROW REAR WHEEL DRIVE POWER WHEELCHAIR WITH TRUETRACK Picture of 3G ARROW REAR WHEEL DRIVE POWER WHEELCHAIR WITH TRUETRACK

    The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, black, blue, yellow, purple, pink, red, or green. CONTROLS: MK6i expandable electronics, including an MK690 controller with an MPJ Mark 6i joystick. or an MK6i display and alternative driver controls. RWD: Rear wheel drive. SEAT (DxW): 12 to 18 x 12 to 16, 16 to 19 x 16 to 20, or 19 to 22 x 20 to 24 inches. The seat width and depth are adjustable in 1-inch increments. The floor-to-seat height is 17.5 inches (low), 19.75 inches (medium), or 21 inches (tall). Seat tilt adjusts continuously from 0 to 10 degrees and the back angle adjusts from 80 to 115 degrees in 5-degree increments. UPHOLSTERY: Black nylon, black vinyl, grey cloth, grey vinyl, or tan vinyl. ARMRESTS: Adjustable- or fixed height full- or desk-length arms. The fixed arm height is 10 inches; adjustable height is 9.5 to 13.5 inches. CASTERS: 8 x 2.25 inch semi-pneumatic casters are standard. Options include 8 x 2.5 inch pneumatic and 9 x 3 inch pneumatic or foam-filled. WHEELS: 14 x 3 inch pneumatic drive wheels are standard. Options include 14 x 3 inch foam-filled and 14 x 4 inch pneumatic or foam-filled. POWER: Uses Group 24 battery (included). SPEEDS: 7 miles per hour. CAPACITY: 300 pounds (most sizes) or 400 pounds (available for 23- and 24-inch wide chairs only). WEIGHT: 190 pounds without batteries. WARRANTY: 5 years for base frame and GB motors; 3 years for seat frame; 1 year for electrical components, 4 pole motor, and remaining components except upholstered materials, padded materials, tires and wheels; 6 months for battery.

  4. 3-INCH SINGLE FIXED WHEEL ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6270) & 5-INCH SINGLE FIXED WHEEL ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6271) Picture of 3-INCH SINGLE FIXED WHEEL ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6270) & 5-INCH SINGLE FIXED WHEEL ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6271)

    The 3-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6270, and the The 5-inch Single Fixed Wheel Attachments with Rear Glide Tips, model 6271, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. Both models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.

  5. 3-INCH SWIVEL WHEELS WITH 13-INCH REAR LEG EXTENSIONS WITH GLIDE TIPS (MODEL 6269), 3-INCH SWIVEL WHEELS WITH 13-INCH CAMBERED SURE GLIDE BRAKES (MODEL 6272) & 3-INCH SWIVEL WHEELS ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6273) Picture of 3-INCH SWIVEL WHEELS WITH 13-INCH REAR LEG EXTENSIONS WITH GLIDE TIPS (MODEL 6269), 3-INCH SWIVEL WHEELS WITH 13-INCH CAMBERED SURE GLIDE BRAKES (MODEL 6272) & 3-INCH SWIVEL WHEELS ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6273)

    The 3-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6272, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 3-inch Swivel Wheels Attachments with Rear Leg Extensions with Glide Tips, model 6269, has the front swivel wheels attachments, rear leg extensions, and glide tips to replace the standard tips on the rear walker legs. The 3-inch Swivel Wheels Attachments with Rear Glide Tips, model 6273, includes the front wheel attatchments and rear glide tips to replace the standard tips on the rear legs. All models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.

  6. 4000 SERIES

    Manual drive wheelchair, folding. Adult sizes, seat widths, 16, 18, 20 or 22 inches. Seat depth, 16 inches. Back height, 16 inches. Arms: fixed or detachable, fixed or adjustable height, full length or desk length. Screw attached stainless steel clothing guards. Arm lock, button spring release. Front rigging: swingaway footrests and elevating legrests; and telescopic legrests. Chrome plated carbon steel frames and crossbraces. Push handles with vinyl handgrips. Upholstery: embossed Naugahyde with reinforced liner. Wheels: 24-inch die-cast composite wheels with pneumatic, solid rubber or puncture proof lightweight polymer tires. Precision ground dual-sealed bearings. Casters: 8-inch plastic mag style wheel with pneumatic, semipneumatic or solid rubber tires, sealed machine bearings. Heavy duty caster fork with 5/8-inch welded stem. Push or pull toggle wheel locks. Chrome plated handrims, 21 3/8 or 19 inches diameter. Overall length: 31 1/2 inches. Overall width: 22 1/2 to 25 3/4 inches. Weight: 41 to 65 pounds.

  7. 5-INCH SWIVEL WHEELS WITH 13-INCH CAMBERED SURE GLIDE BRAKES (MODEL 6268) & 5-INCH SWIVEL WHEELS ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6267) Picture of 5-INCH SWIVEL WHEELS WITH 13-INCH CAMBERED SURE GLIDE BRAKES (MODEL 6268) & 5-INCH SWIVEL WHEELS ATTACHMENTS WITH REAR GLIDE TIPS (MODEL 6267)

    The 5-inch Swivel Wheels with 13-inch Cambered Sure Glide Brakes, model 6268, are wheeled leg attachments for walkers designed to convert standard walkers to wheeled walkers. This set includes front swivel wheel attachments and rear leg attachments with cambered brakes. The 5-inch Swivel Wheels Attachments with Rear Glide Tips, model 6267, has the front swivel wheels attachments and glide tips to replace the standard tips on the rear walker legs. Both models fit Invacare walkers and have easy-to-clean polypropylene wheel rims and non-marring thermoplastic rubber tires. The wheels and bearings are corrosion protected. WARRANTY: Limited lifetime warranty.

  8. A4 Picture of A4

    The A4 is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Lightweight frame with an overall width of 18.75 to 36.5 inches. Features include a curved back frame and a camber tube clamp assembly that allows adustment of the center-of-gravity in an infinite number of settings. A full suspension is available as an option. SEAT: Available with seat widths of 12 to 22 inches and seat depths of 14 to 22 inches. The rear seat-to-floor height can be adjusted in half-inch increments. The back has an adjustable-angle fold-down mechanism. CASTERS: 3-, 4-, 5-, or 6-inch casters. WHEELS: 22-, 24-, or 26-inch rear wheels. CAPACITY: 300 pounds. WEIGHT: 14.5 pounds with a 15 x 16 inch seat and without wheels or accessories. WARRANTY: Lifetime warranty on the frame.

  9. A4 TITANIUM Picture of A4 TITANIUM

    The A4 Titanium is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with infinite center-of-gravity adjustment and a full suspension option. The overall frame width ranges from 18.75 to 36.5 inches. A tapered or V front end are available at no extra charge. The frame is available in a choice of 22 colors. Rear anti-tips are optional. SEAT: Available with seat width from 12 to 22 inches and seat depth from 14 to 22 inches. The seat-to floor height is available from 17 to 21 inches (17-inch height is not available with full suspension). The rear seat-to-floor height is adjustable in half-inch increments without head tube adjustment. A seat pouch and positioning belts are available. The back is height-adjustable (a choice of four adjustment ranges is standard) and angle adjustable for up to 15 degrees of squeeze. The back is standard with a welded rigidizer bar and no push handles. A bolt-on rigidizer bar and push handles are optional. A fold-down back is available at no extra charge. A back pouch and adjustable-tension back upholstery are available at an extra cost. ARMRESTS: The chair comes standard without armrests. Swing-away padded armrests and height-adjustable desk- or full-length T arms are available. Fabric clothing guards, small or large rigid side guards, small or large quad side guards, and non-removable fold-down side guards are optional. BRAKES: Push-to-lock wheel locks are standard. Pull-to-lock clamp-on wheel locks are available at no charge. Options include wheel lock extensions, Hill Holder clamp-on wheel locks, and hideaway undermount wheel locks. CASTERS: Front 3-inch roller blade casters are standard. Optional 4-, 5-, or 6-inch casters are available. WHEELS: 22- , 24- , or 26-inch rear wheels in a variety of styles are available. Pneumatic tires are standard. Flat-free inserts, treaded urethane tires, Primo tires, KIK-Black tires, and 24-inch knobby tires are available as options. Inside- or outside-mounted anodized aluminum handrims are standard. Black plastic-coated handrims and plastic-coated handrims with oblique or vertical projections are available. Additional options include spoke guards, quad-release axles, and a tire pump. FOOTRESTS: An adustable one-piece footboard is standard. An adjustable tubular footrest is available at no extra charge. A calf strap for either style is available at no charge. Options include impact guards and a basketball roller. CAPACITY: 300 pounds. WEIGHT: 13 pounds with 15 x 16 inch seat and without wheels or accessories. WARRANTY: Lifetime warranty on frame.

  10. A-6 & A-6S Picture of A-6 & A-6S

    The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch increments. Wheel-base nut and bolt adjustment is standard. Quick-release wheel-base adjustment is optional. Rear anti-tips are optional. The frame is available in a choice of 16 standard and four extra-cost colors. SEAT: The seat width and depth are available from 14 to 20 inches in one-inch increments; the seat to floor height ranges from 17 to 21.5 inches, depending on rear wheel and caster selections. An optional seat pouch and positioning belts are available. A fold-down back with a choice of a welded or bolt-on back rigidizer and without push handles is standard. A choice of five back-height adjustment ranges is available. A 90-degree straight back, a four- or eight-degree forward angle bend, or a four-degree backward angle bend are available at no charge. Bolt-on push handles, adjustable tension upholstery, and a backpack are extra-cost options. CUSHION: Cushions are extra-cost options and include a choice of an Essential Cushion, a single-density cushion, a personal seat cushion, Comfort-Mate Extra, or a choice of three Infinity cushion styles. A cushion rigidizer is also available. UPHOLSTERY: Sling upholstery. ARMRESTS: Swing-away padded armrests and height-adjustable full- or desk-length T arms are available. Additional options include fabric clothing guards, small or large rigid side guards, or small or large quad rigid side guards. BRAKES: Pull-to-lock wheel locks. Options include wheel lock extensions, hill holders, and undermount wheel locks. CASTERS: 3-inch roller blade or 5- or 6-inch composite front casters with urethane tires are standard. Options include 5-inch aluminum casters with urethane tires or 6 x 1.25 composite casters with pneumatic tires are optional. WHEELS: 22- , 24- , or 26-inch rear wheels in a variety of styles. Pneumatic tires are standard. Flat-free pneumatic tires, treaded urethane tires, 700C Umma Gumma tires, Primo tires, and KIK-black tires are available. Standard mounting is outside the handrim; inside mounting is available at no charge. Anodized aluminum handrims are standard. Plastic-coated handrims, black plastic-coated handrims, and plastic-coated handrims with vertical or oblique projections are available. FOOTRESTS: An adjustable-angle one-piece footboard is standard; a one-piece tubular Footrest is available at no charge. A basketball roller and impact guards are available. CAPACITY: Configurations are available for users weighing 100 pounds and under to users weighing 250 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

  11. ADJUSTABLE FOOTREST

    Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.

  12. ALL PURPOSE NARROW BASE QUAD CANE (MODEL 6825)

    Narrow based adjustable height 4 legged cane with straight shaft shovel type handle. Rubber safety tips. Base is 7 by 8 1/2 inches. Height adjustment is a double locking clamp. Adjustable height from 29 to 38 inches.

  13. ALLEGRO

    The Allegro is a lightweight child or adult wheelchair designed to address a variety of positioning needs for people with mobility disabilities. FRAME: Folding modular crossbrace frame for growth capability in a choice of colors is standard. A rigid frame and a frame without seat rails are available. SEAT: The seat depth and back angle are adjustable to permit the acceptance of a variety of seating systems. An adjustable-height back, upholstered back canes, and fixed-height back canes for positioning systems are available. The seat depth ranges from 12 to 18 inches and the width ranges from 12 to 20 inches. The seat-to-floor height is available in 15, 15.5, 16, 17, 18, 19, or 20 inches. CUSHION: Optional. UPHOLSTERY: Nylon sling upholstery. ARMRESTS: Options include canttilever and T armrests, flat upholstered arm pads, fabric side guards, small or large rigid side guards, and small or large quad rigid side guards. BRAKES: Wheel locks are standard. CASTERS: Standard. WHEELS: A number of choices are available. FOOTRESTS: Choices are available to augment the chair's use with a variety of seating options. CAPACITY: 250 pounds. WEIGHT: 27 to 29 pounds.

  14. CELEBRITY X 3 WHEEL Picture of CELEBRITY X 3 WHEEL

    The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features accessible tie-down points for securing the unoccupied scooter during transport. The scooter is available in viper blue or candy apple red. CONTROLS: Delta tiller with wrap-around handles. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 19 x 16 deluxe foldable molded seat with sliders. The standard back height is 14 inches. The seat-to-deck height adjusts from 16.25 to 17.5 inches and the seat- to-ground height adjusts from 23 to 24.25 inches. The seat post is front frame mounted for stability with three standard adjustments. A lap belt and a powered elevating seat are available as options. ARMRESTS: Standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheel is 3.5 x 10 inches and the rear wheels are 4 x 10 inches. Pneumatic tires are standard and solid tires are optional. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, jumbo front basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 6 miles per hour for a range of up to 25 miles. CAPACITY: 350 pounds. WEIGHT: 141.5 pounds without batteries. WARRANTY: Three-year limited warranty on the frame.

  15. CELEBRITY X 4 WHEEL Picture of CELEBRITY X 4 WHEEL

    The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features accessible tie-down points for securing the unoccupied scooter during transport. The scooter is available in viper blue or candy apple red. CONTROLS: Delta tiller with wrap-around handles. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 19 x 16 deluxe foldable molded seat with sliders. The standard back height is 14 inches. The seat-to- deck height adjusts from 16.25 to 17.5 inches and the seat-to-ground height adjusts from 23 to 24.25 inches. The seat post is front frame mounted for stability with three standard adjustments. A lap belt and a powered elevating seat are available as options. ARMRESTS: Standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheels are 3.5 x 10 inches and the rear wheels are 4 x 10 inches. Pneumatic tires are standard and solid tires are optional. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, jumbo front basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 6 miles per hour for a range of up to 25 miles. CAPACITY: 350 pounds. WEIGHT: 151 pounds without batteries. WARRANTY: Three-year limited warranty on the frame.

  16. CIRRUS

    Cirrus is a lightweight manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chorome finish and dual axle allowing seat transition to hemi-level. SEAT: 16-, 18-, or 20-inch width. UPHOLSTERY: Flame-retardant black nylon upholstery. ARMRESTS: Flip-back arms with nylon padded armrests. Arms come in a choice of full or desk style. CASTERS: Urethane front casters with caster forks with three height adjustments. WHEELS: Composite mag wheels with precision-sealed wheel bearings and urethane rear tires. FOOTRESTS: Aluminum footplate with optional swing-away footrest and swing-away elevating legrest with calf pads. WEIGHT: 32 pounds, excluding front rigging. WARRANTY: Limited lifetime warranty.

  17. CIRRUS PLUS FOLDING POWER CHAIR Picture of CIRRUS PLUS FOLDING POWER CHAIR

    The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 15 degrees. CUSHION: A seat cushion with pouch is standard. UPHOLSTERY: Padded back upholstery. ARMRESTS: Height- and width-adjustable detachable arms. BRAKES: Electronic regenerative brakes and wheel locks. CASTERS: 8-inch solid black front casters. WHEELS: 13-inch solid black rear wheels. FOOTRESTS: Calf straps and heel loops are included. POWER: Uses two U1, 34 AMP batteries (included). SPEEDS: 6 miles per hour. CAPACITY: 300 pounds for 16-, 18-, or 20-inch chairs and 450 pounds for a 22-inch chair. WARRANTY: Limited lifetime warranty on power chair frame; one year limited warranty on electronics and drive train components; six month warranty on battery (from date of installation).

  18. DAYTONA 4 (MODELS S45001 & S45002) Picture of DAYTONA 4 (MODELS S45001 & S45002)

    The Daytona 4 is a four-wheeleed scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 49 x 22.5 inches. The frame is available in red (model S45001) or blue (model S45002). This scooter is equipped with anti-tippers, headlights, and a large carrying basket. The scooter has a 64-inch turning radius, an 8-inch safe climbing angle, and 3-inch ground clearance, and it disassembles for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured swivel seat is height- and back-adjustable. ARMRESTS: Adjustable-width arms. WHEELS: 10-inch solid wheels in front and back. POWER: Uses two removable 36 AM batteries. SPEEDS: 5 miles per hour. CAPACITY: 300 pounds. WEIGHT: 173 pounds (121 pounds without batteries). WARRANTY: Lifetime warranty on power chair frame, two-year warranty on the electronic controller, one-year warranty on the drive train components, and a six-month warranty on the batteries.

  19. DELTA ULTRA LIGHT 1000 FULL-ELECTRIC BED (MODEL 15033)

    The Delta Ultra Light 1000 Full-Electric Bed, model 15033, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and a zinc-coated spring deck. CONTROLS: Controls are located at on a handheld controller with large buttons. CASTERS: Four swiveling casters are standard. OPTIONS: Full length side rails; half rails; 80-inch inner spring mattress; 80-inch foam mattress; 80-inch therapeutic support mattress; extension kit extends length of mattress base from 80 to 84 inches. DIMENSIONS (LxW): 88 x 36 inches. The height adjusts from 12.75 to 24inches. POWER: Two electric drive modules. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections 9 times. A hand crank (included) can also be used when necessary. CAPACITY: 450 pounds. WEIGHT: 162 pounds. WARRANTY: 5 years on motor and hand control, Limited Lifetime on welds and frame, 1 year on all other parts and components.

  20. DELTA ULTRA LIGHT 1000 FULL-ELECTRIC LOW BED (MODEL 15035)

    The Delta Ultra Light 1000 Full-Electric Low Bed, model 15035, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and a zinc-coated spring deck. CONTROLS: Controls are located at on a handheld controller with large buttons. CASTERS: Four swiveling casters are standard. OPTIONS: Full length side rails; half rails; 80-inch inner spring mattress; 80-inch foam mattress; 80-inch therapeutic support mattress; extension kit extends length of mattress base from 80 to 84 inches. DIMENSIONS (LxW): 88 x 36 inches. The height adjusts from 9.5 to 23.5 inches. POWER: Two electric drive modules. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections 9 times. A hand crank (included) at the top of the footboard can also be used when necessary. CAPACITY: 450 pounds. WEIGHT: 167 pounds. WARRANTY: 5 years on motor and hand control, Limited Lifetime on welds and frame, 1 year on all other parts and components.

  21. DELTA ULTRA LIGHT 1000 SEMI-ELECTRIC BED (MODEL 15030)

    The Delta Ultra Light 1000 Semi-Electric Bed, model 15030, is a motorized bed designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. This bed can be raised and lowered at three independent points, the head, knee and foot, and the entire bed can be raised and lowered to facilitate transfer. The headboards and footboards are interchangeable with Drive's and some other manufacturers bed ends. FRAME: The frame includes woodgrain head- and footboards and a zinc-coated spring deck. CONTROLS: Controls are located at on a handheld controller with large buttons. CASTERS: Four swiveling casters are standard. OPTIONS: Full length side rails; half rails; 80-inch inner spring mattress; 80-inch foam mattress; 80-inch therapeutic support mattress; extension kit extends length of mattress base from 80 to 84 inches. DIMENSIONS (LxW): 88 x 36 inches. The height adjusts from 12.75 to 24 inches. POWER: Two electric drive modules. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections 9 times. A hand crank (included) can also be used when necessary. CAPACITY: 450 pounds. WEIGHT: 155 pounds. WARRANTY: 5 years on motor and hand control, Limited Lifetime on welds and frame, 1 year on all other parts and components.

  22. DELUXE FOLDING WALKER, TWO BUTTON V-BRACE (MODELS 10200DX-2 & 10201DX-2) Picture of DELUXE FOLDING WALKER, TWO BUTTON V-BRACE (MODELS 10200DX-2 & 10201DX-2)

    The Deluxe Folding Two Button Walker with V-Brace is a folding height-adjustable walker designed for use by individuals with walking or balance disabilities. The walker is constructed of one-inch anodized, extruded aluminum. SIZES: Junior and adult. DIMENSIONS (HxW): 32 to 39 x 23 inches (model 10200DX-2) or 25 to 32 x 23 inches (model 10201DX-2). CAPACITY: 375 pounds. WEIGHT: 6.5 pounds (10200DX-2) or 6.3 pounds (10201DX-2).WARRANTY: Limited lifetime warranty.

  23. DELUXE TRIGGER RELEASE FOLDING WALKER (MODELS 10224-2, 10224GY-2, 10225-2, & 10225GY-2) Picture of DELUXE TRIGGER RELEASE FOLDING WALKER (MODELS 10224-2, 10224GY-2, 10225-2, & 10225GY-2)

    The Deluxe Trigger Release Folding Walker is a height-adjustable folding walker designed for use by individuals with walking or balance disabilities. It features trigger release levers enabling the user to fold the walker without letting go of the handles. SIZES: Junior and adult. DIMENSIONS (HxLxW): 32 to 38 x 18 x 24 inches (models 10224-2 and 10224GY-2), 25 to 32 x 18 x 24 inches (models 10225-2 and 10225GY-2). CAPACITY: 300 pounds. WEIGHT: 6 pounds (models 10225-2 and 10225GY-2) or 6.5 pounds (models 10224-2 and 10224GY-2). COLOR: Crossbraces are available in gray (models 10224GY-2 and 10225GY-2) or flame blue (models 10224-2 and 10225-2).

  24. DELUXE WATERJET SPA Picture of DELUXE WATERJET SPA

    The Deluxe Waterjet Spa is a whirlpool attachment for standard bathtubs designed to relieve pain and stiffness for individuals with physical disabilities or arthritis. The unit has two multi-directional water jets that circulate 42 gallons of water per minute.

  25. FEATHER-LITE ALUMINUM ROLLATOR (formerly AUSSIE LITE & AUSSIE LITE PETITE) Picture of FEATHER-LITE ALUMINUM ROLLATOR (formerly AUSSIE LITE & AUSSIE LITE PETITE)

    The Feather-Lite Aluminum Rollator is a folding wheeled walker with seat designed for use by individuals with walking disabilities. This folding four-wheel aluminum rollator is equipped with large wheels for indoor or outdoor ue. Additional features include lever locks, a plastic seat with a cut out handle for one hand folding, a padded flexible backrest, and an adjustable height handle. SIZES: Adult or petite. DIMENSIONS: The wheels are 8 inches in diameter. COLOR: Red or silver. WARRANTY: Limited lifetime warranty; lifetime warranty on brake cable.

  26. FINGERTIP PULSE OXIMETER (MODEL 18700) Picture of FINGERTIP PULSE OXIMETER (MODEL 18700)

    The Fingertip Pulse Oximeter, model 18700, is an oxygen monitor designed to measure oxygenation level in individuals with respiratory disabilities. Placed on a fingertip, this compact, lightweight unit measures oxyhemoglobin level and pulse rate. POWER: Uses 3.6V Lithium Batteries 0.5 d0uble-A batteries. Replacement batteries are available. The unit has automatic power-off and a low voltage indicator. WEIGHT: 50 grams including batteries. COLOR: Yellow.

  27. FULL ELECTRIC BARIATRIC BED (MODELS 15300, 15302, & 15303) Picture of FULL ELECTRIC BARIATRIC BED (MODELS 15300, 15302, & 15303)

    The Full Electric Bariatric Bed is a motorized bed designed for use by individuals with severe physical disabilities or spinal cord injury. The bed is height adjustable, and has a heavy-duty frame. OPTIONS: Each size bed is available in a package with a bariatric foam mattress and one or two pairs of "T"-style side safety rails. DIMENSIONS (HxLxW): 18.25 to 26.25 x 88 x 42 inches (model 15300), 48 inches (model 15302), or 54 inches (model 15303). CAPACITY: 600 pounds (model 15300), 750 pounds (model 15302), or 1,000 pounds (model 15303). WEIGHT: 300 pounds (model 15300), 320 pounds (model 15302), or 350 pounds (model 15303).

  28. GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E) Picture of GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E)

    The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). The scooter is equipped with rear anti-tips. The turning radius is 32.5 inches and ground clearance is 2.625 inches. RWD: Rear wheel drive with sealed mini transaxle drive. SEAT: Foldable molded plastic seat. UPHOLSTERY: Vinyl. ARMRESTS: Standard. BRAKES: Electronic/ regenerative and electromechanical dual braking system. WHEELS: 2 x 8 inch solid front tire and 2.5 x 8 inch solid rear tires. POWER: Uses two 12-volt deep cycle (AGM or gel cell type) batteries, 12 AH or 17 AH. An off-board dual voltage battery charger is included. SPEEDS: 4.25 miles per hour. CAPACITY: 260 pounds. WEIGHT: 75 pounds without battery. The battery pack weighs 21 pounds with two 12 AH batteries or 33 pounds with two 17 AH batteries.

  29. GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E) Picture of GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E)

    The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are standard. The turning radius is 32.5 inches and ground clearance is 2.5 inches. RWD: Rear wheel drive with sealed mini transaxle drive. SEAT: Foldable molded plastic seat. UPHOLSTERY: Vinyl. ARMRESTS: Standard. BRAKES: Electronic/regenerative and electromechanical dual braking system. WHEELS: Two 2 x 7 inch solid front tires and two 2.5 x 8 inch solid rear tires. POWER: Uses two 12-volt deep cycle (AGM or gel cell type) batteries, 12 AH or 17 AH. An off-board dual voltage battery charger is included. SPEEDS: 4.25 miles per hour. CAPACITY: 260 pounds. WEIGHT: 79 pounds without battery. The battery pack weighs 21 pounds with two 12 AH batteries or 33 pounds with two 17 AH batteries.

  30. IMAGE MID WHEEL DRIVE WHEELCHAIR Picture of IMAGE MID WHEEL DRIVE WHEELCHAIR

    The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-inch wide height adjustable captain's seat with three point connections, adjustable headrest, and positioning belt. The seat reclines and folds down. ARMRESTS: Arms are width- and angle-adjustable. BRAKES: Electric brakes. CASTERS: 5-inch semi-pneumatic front wheels; 8-inch semi-pneumatic rear swivel wheels. WHEELS: 10-inch drive middle wheels with flat free inserts. FOOTRESTS: The auto flip-back footplate is angle-, height-, and depth- adjustable. POWER: Batteries and on-board charger included. CAPACITY: 300 pounds. WARRANTY: Lifetime warranty on frame and one year on electronic controller and drive train components.

  31. INVACARE 9000 XDT Picture of INVACARE 9000 XDT

    The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is available in 16, 17, 18, 19, or 20 inches. The standard seat-to-floor height is available in 17.5, 18.5, or 19.5 inches; 21.5 inches can be achieved with alternate wheel and caster packages. The back height adjusts from 15 to 19 inches in one-inch increments. UPHOLSTERY: Flame-retardant padded upholstery with heavy-duty liners. Black nylon is standard; options include black, dark blue, camel vinyl, as well as black sail cloth or hunter green or ruby nylon. ARMRESTS: Available styles include full- or desk-length, fixed height, padded flip-back armrests and full- and desk-length height-adjustable, padded flip-back armrests. The armrests are available in conventional or space saver configurations. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded front casters with urethane tires are standard. WHEELS: No flex molded rear wheels with handrims, triple-position axles, and urethane tires are standard. FOOTRESTS: Hemi or super hemi swing-away footrests, hemi or super hemi swing-away padded elevating legrests, or articulating elevating legrests. The footplates are available in aluminum or composite. CAPACITY: 350 pounds. WEIGHT: Less than 38 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

  32. INVACARE 9000 XT Picture of INVACARE 9000 XT

    The Invacare 9000 XT is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles and anti-tips are standard. The frame is available in standard adult, hemi, and super hemi. SEAT: The seat is available in a choice of 14, 15, 16, 17, 18, 20 or 22 inches wide on the adult and hemi models and 14, 15, 16, 17, or 18 inches on the super-hemi model. The standard seat depth is 16 inches; 17 and 18 inches are available on the adult and hemi frames and 16 and 17 inches are available on the super hemi. The standard seat-to-floor height is available in 17.5, 18.5, or 19.5 inches on the adult and hemi models; 15.5 or 16.5 inches can be achieved with alternate wheel and caster packages. The seat-to-floor height is 13.5 or 14.5 inches on the super hemi. The back height adjusts from 15 to 19 inches in one-inch increments. An angle-adjustable back with adjustments from -5 through 20 degrees in 5-degree increments is optional. UPHOLSTERY: Flame-retardant padded upholstery with heavy-duty liners. Black nylon is standard; black sail cloth, hunter green nylon, ruby nylon, teal nylon, cobalt blue nylon, black vinyl, dark blue vinyl, or camel vinyl are optional. ARMRESTS: Available styles include full- or desk-length, fixed height, padded flip-back armrests and full- and desk-length height-adjustable, padded flip-back armrests. The armrests are available in space saver and conventional models. BRAKES: Push-to-lock wheel locks are standard. CASTERS: Molded 8-inch front casters with urethane tires are standard. Optional sizes are available. WHEELS: No flex 24-inch molded rear wheels with handrims and urethane tires are standard. Optional sizes are available. FOOTRESTS: Hemi or super hemi swing-away footrests, hemi or super hemi swing-away padded elevating legrests, or articulating elevating legrests. The footplates are available in aluminum or composite. CAPACITY: 250 pounds. WEIGHT: Less than 32 pounds. WARRANTY: Lifetime warranty on frame and crossbraces.

  33. INVACARE CLAMP-ON RAISED TOILET SEAT (MODELS 1391AP & 1391P) Picture of INVACARE CLAMP-ON RAISED TOILET SEAT (MODELS 1391AP & 1391P)

    The Invacare Clamp-On Raised Toilet Seat, models 1391AP and 1391P, is a molded elevated toilet seat designed for use by individuals with arthritis or mobility disabilities. The unit fits over the toilet bowl, installs without tools, and features a clamp-on locking mechanism that can be tightened with one hand. Rear seat wings and non-skid pads provide additional security. Available with (1391AP) or without armrests (1391P), the unit has a contoured seat with a deep front recess for personal hygiene. DIMENSIONS: Both models add 5.5 inches of height to the toilet bowl. The seat is 17 x 17 inches. The width between arms (model 1391AP only) is 19.25 inches. CAPACITY: 250 pounds. WEIGHT: 7 pounds with armrests and 5 pounds without armrests. WARRANTY: 3 year limited warranty.

  34. INVACARE IVC LIGHTWEIGHT ALUMINUM TRANSPORT CHAIR Picture of INVACARE IVC LIGHTWEIGHT ALUMINUM TRANSPORT CHAIR

    The Invacare IVC Lightweight Aluminum Transport Chair is a folding adult transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 24.5 x 23.5 inches. The folding frame is made of lightweight aluminum. SEAT (LxW): 17 x 19 inches. The floor- to-seat height is 19.25 inches. The back folds down for transport. UPHOLSTERY: Flame-retardant, bacteria-resistant black nylon upholstery. ARMRESTS: Permanent full-length padded armrests. BRAKES: Wheel locks are on the hand grips. CASTERS: 8-inch urethane casters. WHEELS: 12-inch rear wheels. FOOTRESTS: Swing-away footrests with composite footplates. CAPACITY: 250 pounds. WEIGHT: 19 pounds without front riggings. WARRANTY: 13-month limited warranty.

  35. INVACARE IVC TRACER EX2 WHEELCHAIR Picture of INVACARE IVC TRACER EX2 WHEELCHAIR

    The Invacare IVC Tracer EX2 is a manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Carbon steel frame with triple chrome plating and 14-gauge cross braces. SEAT (LxW): 16, 18, or 20 x 16 inches. The floor-to-seat height is 17.5 to 19.5 inches. UPHOLSTERY: Flame-retardant vinyl dual-embossed upholstery with heavy-duty inner liners in blue, ruby, or black. ARMRESTS: Padded full-length permanent arms, padded full-length fixed-height removable arms, or padded desk-length fixed-height removable arms. CASTERS: 8-inch casters. WHEELS: 24-inch rear no-flex wheels with urethane tires. FOOTRESTS: 17 to 21 inch hemi swing-away footrest, 17.5 to 21 inch hemi swing-away padded elevating legrest, or 17.5 to 21 inch articulating elevating legrest. Aluminum or composite footplates are available. CAPACITY: 250 pounds. WEIGHT: 36 pounds. WARRANTY: 5-year warranty on the frame and cross braces.

  36. KNEE WALKER (MODEL 780) Picture of KNEE WALKER (MODEL 780)

    The Knee Walker, model 780, is a wheeled walker designed for use by individuals with walking, balance, or foot disabilities. This walker provides support for one leg and allows the other to be used freely. This walker features a lever brake, tool-free height adjustment, tool-free left to right/right to left leg adjustment and four wheels designed for indoor or outdoor use. DIMENSIONS (LxW): 29 x 14.5 inches. The knee pad is 14.5 x 7.5 inches. The handle height is adjustable from 33 to 41 inches, and the knee pad height is adjustable from 18 to 22 inches. The wheels are 8 inches in diameter. CAPACITY: 250 pounds. WEIGHT: 16 pounds. WARRANTY: Limited lifetime warranty.

  37. MED AIRE ALTERNATING PRESSURE PUMP AND PAD SYSTEM (MODELS 14001, 14001EF, & 14002) Picture of MED AIRE ALTERNATING PRESSURE PUMP AND PAD SYSTEM (MODELS 14001, 14001EF, & 14002)

    The Med Aire Alternating Pressure Pump and Pad System is an alternating air pressure mattress surface designed for use by individuals who are at risk for pressure sores/ulcers. The variable pressure pump produces an air flow of eight liters per minute. It is available with a pad with end flaps (model 14001EF) or without end flaps (model 14001). OPTIONS: Fixed pressure pump and pad, model 14002; replacement pumps and pads; filter; clear or beige tubing; and a basket for alternating pressure pump.

  38. MINI PHANTOM 3 WHEEL COMPACT SCOOTER (MODELS S35001692 & S35002692) Picture of MINI PHANTOM 3 WHEEL COMPACT SCOOTER (MODELS S35001692 & S35002692)

    The Mini Phantom 3 Wheel Compact Scooter is a 3-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (HxLxW): 35 x 37 x 21 inches. The turning radius is 37 inches and ground clearance is 2 inches. The frame disassembles into three pieces for transport. Anti-tippers are standard. Available colors are red (model S35001692) or blue (model S35002692). CONTROLS: PG S-Drive 45A controller with finger pull throttle. SEAT: Height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up, adjustable-width armrests. BRAKES: Electronic regenerative braking system. WHEELS: One 8-inch solid front and 9-inch solid rear tires. POWER: Uses two 12-volt removable, rechargeable batteries. An off-board battery charger is standard. SPEEDS: 4 miles per hour for a range of up to 10 miles. CAPACITY: 250 pounds. WEIGHT: 81.4 pounds without batteries. When disassembled, the heaviest piece weighs 28 pounds. The batteries weigh 21.3 pounds. WARRANTY: 1 year parts and labor and a 3-year limited warranty on the on frame.

  39. ODYSSEY (MODELS S45200 & S45300) Picture of ODYSSEY (MODELS S45200 & S45300)

    The Odyssey is a four-wheeled powered scooter designed for use by individuals with mobility disabilities. Features include directional front and rear lights with turn signals and a large carry basket. FRAME (LxW): 51 x 26.4 inches. The turning radius is 70 degrees with 4.5 inches of ground clearance. The scooter comes with anti- tippers, full front suspension, and front and rear bumpers. The scooter is available in red (model S45200) or blue (model S45300). CONTROLS: Adjustable tiller. SEAT: Height-adjustable contoured swivel seat (upgraded captain seat available). ARMRESTS: Adjustable flip-back arms. WHEELS: Four 13-inch wheels with flat-free tires. POWER: Uses two removable 12-volt 34 AH batteries. SPEEDS: 6 miles per hour with a range of 20 miles and a 10-degree safe climbing angle. CAPACITY: 350 pounds. WEIGHT: 185 pounds (143 pounds without battery). WARRANTY: Lifetime warranty on power chair frame, one-year warranty on electronic controller and drive train components, and a six-month warranty on batteries.

  40. OVERSIZED ALUMINUM FOLDING WALKER (MODELS 10220-2 & 10223-2) Picture of OVERSIZED ALUMINUM FOLDING WALKER (MODELS 10220-2 & 10223-2)

    The Oversized Aluminum Folding Walker is a height-adjustable folding walker designed for use by individuals with walking or balance disabilities. This bariatric walker has a wider and deeper frame than standard walkers. DIMENSIONS (HxW): 32 to 39 x 28 inches (model 10220-2) or 25 to 32 x 28 inches (model 10223-2). CAPACITY: 500 pounds. WEIGHT: 7 pounds (model 10220-2) or 6.8 pounds (model 10223-2).

  41. PHANTOM (MODELS S35001 & S35002) Picture of PHANTOM (MODELS S35001 & S35002)

    The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back, adjustable-width arms. WHEELS: Three 8-inch flat-free tires. POWER: Uses two 12-volt rechargeable batteries (included). These wireless batteries can be removed for charging apart from the scooter. SPEEDS: 4 miles per hour with a range of 15 miles. CAPACITY: 300 pounds. WEIGHT: 84 pounds (63 without battery). WARRANTY: Lifetime warranty on power chair frame, two-year limited warranty on electronic controller, one-year limited warranty on drive train components, and a six-month warranty from date of installation on battery.

  42. POLLYWOG TRANSPORT CHAIR Picture of POLLYWOG TRANSPORT CHAIR

    The Pollywog Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This transport chair can be transformed into a self-propelled wheelchair by removing the rear casters and substituting 24-inch wheels (included). FRAME: All aluminum frame. SEAT: 18-inch seat width. This chair has a fold-down back with carry pocket. UPHOLSTERY: Nylon upholstery. ARMRESTS: Full-length folding arm. BRAKES: Dual brakes for use as wheelchair or transport chair. CASTERS: Four 8-inch front and rear casters. WHEELS: Removable 24-inch rear wheels included. FOOTRESTS: Comes standard with swing-away footrests with composite footplates and heel loops. WARRANTY: Limited lifetime warranty.

  43. POLY-FLY HIGH STRENGTH, LIGHT WEIGHT WHEELCHAIR/FLYWEIGHT TRANSPORT CHAIR COMBO (MODELS TR16, TR18 AND TR20) Picture of POLY-FLY HIGH STRENGTH, LIGHT WEIGHT WHEELCHAIR/FLYWEIGHT TRANSPORT CHAIR COMBO (MODELS TR16, TR18 AND TR20)

    The Poly-Fly High Strength, Light Weight Wheelchair/Flyweight Transport Chair Combo, models TR16, TR18 and TR20, is a manual lightweight wheelchair and transport wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair can be converted from a standard manual wheelchair to a transport wheelchair by removing the large rear wheels so that the chair rolls on 4 casters that are fixed in the rear and swivel in front. FRAME (LxWxH): 42 x 23.5 x 37 inches (Model TR 16); 42 x 24.5 x 37 inches (TR18); 41 x 25.5 x 39.5 inches (TR20). The Poly-Fly has an aluminum frame and standard anti-tippers. When folded, the width is 12 inches (Models TR16 and TR18) or 13 inches (Model TR20). SEAT (WxD): 16 x 16 inches (Model TR 16); 18 x 16 inches (TR18); 20 x 16 inches (TR20). The seat back folds down. The seat back height is 16 inches, and the seat-to-floor height is 19.5 inches on all models. UPHOLSTERY: Black nylon upholstery. ARMRESTS: Padded armrests. BRAKES: Two sets of wheel locks are included, one for each set of rear wheels. CASTERS: Four 8-inch diameter casters, fixed in the rear and swiveling in front. WHEELS: Two 24-inch diameter rear wheels that can be removed with a pushbutton release system. Black handrims are standard. FOOTRESTS: Swing-away elevated legrests with composite footplates, heel loops and optional front riggings. CAPACITY: 250 pounds. WEIGHT: 33 pounds (Model TR16); 34 pounds (TR18); 41 pounds (TR20). WARRANTY: Limited lifetime warranty.

  44. PREMIUM GUARD 3-INCH GEL / FOAM OVERLAY (MODEL 14893) Picture of PREMIUM GUARD 3-INCH GEL / FOAM OVERLAY (MODEL 14893)

    The Premium Guard 3-inch Gel/Foam Overlay, model 14893, is a gel and foam mattress overlay designed for use by individuals at risk for developing decubitis ulcers/pressure sores. This overlay has four gel bladders, a high-density foam shell and support base, a convoluted high- density polyurethane foam topper, and a urethane-coated nylon cover, designated head and foot sections, and elastic corner straps to secure the overlay to the mattress. DIMENSIONS (HxLxW): 3 x 72 x 34 inches. WARRANTY: One-year warranty.

  45. PREMIUM GUARD DELUXE STATIC AIR MATTRESS OVERLAY (MODEL 14425) Picture of PREMIUM GUARD DELUXE STATIC AIR MATTRESS OVERLAY (MODEL 14425)

    The Premium Guard Deluxe Static Air Mattress Overlay, model 14425, is an air flotation mattress surface designed for use by individuals at risk for pressure sores/decubitis ulcers. Four heavy-duty, elastic bed straps prevent the overlay from moving. OPTIONS: Manual pump (model 14426) or electric pump (model 14427). DIMENSIONS: 3 x 72 x 35 inches. WEIGHT: 6 pounds.

  46. PREMIUM GUARD GEL “E” SEAT CUSHION (MODELS 14890, 14891, & 14905) Picture of PREMIUM GUARD GEL “E” SEAT CUSHION (MODELS 14890, 14891, & 14905)

    Premium Guard Gel "E" Seat Cushionis a gel flotation seat cushion designed for use by people who use wheelchairs. This pressure- reducing cushion assists in the prevention and healing of pressure sore ulcers. DIMENSIONS (HxLxW): 3 x 16 x 18 inches (model 14890), 3 x 16 x 16 inches (model 14891), or 3 x 17 x 17 inches (model 14905). WEIGHT: 4.4 pounds (model 14891), 4.6 pounds (model 14890), or 4.8 pounds (model 14905).

  47. PREMIUM GUARD VISCO FOAM CUSHION (MODEL 14892) Picture of PREMIUM GUARD VISCO FOAM CUSHION (MODEL 14892)

    The Premium Guard Visco Foam Cushion, model 14892, is a foam seat cushion designed for use by wheelchair users. DIMENSIONS (HxLxW): 3 x 16 x 18 inches. WEIGHT: 2.8 pounds. COLOR: Blue. WARRANTY: 1 year.

  48. PREMIUM GUARD WATER MATTRESS (MODEL 14400) Picture of PREMIUM GUARD WATER MATTRESS (MODEL 14400)

    The Premium Guard Water Mattress, model 14400, is a water flotation mattress designed for use by individuals at risk for pressure sores/decubitis ulcers. Three water baffles enhance movement and support to reduce pressure and conform to varying body weights. OPTIONS: Fill hose (model 14401). DIMENSIONS: 3 x 72 x 34 inches. WEIGHT: 45 pounds.

  49. QUAD CANE, SMALL BASE Picture of QUAD CANE, SMALL BASE

    The Quad Cane,Small Base is quad cane designed for use by individuals with balance or walking disabilities. The four-point base is combined with an offset handle for stability and support. This cane also has one-button height adjustment with a locking bolt. DIMENSIONS: The height adjusts from 30 to 39 inches. CAPACITY: 300 pounds. WARRANTY: Limited lifetime warranty.

  50. RICKIE WALKER (MODEL 400)

    The Rickie Walker, Model 400, is a folding adjustable wheeled walker and tri- wheeled walker designed for use by people with mobility disabilities. This walker features pushdown positive brakes, positive stopping, 8-inch pneumatic tires on all wheels, bearings in all wheels and the front fork, and custom contoured handgrips. The walker has a 360-degree turning radius. OPTIONS: A carrying basket and tote are available. DIMENSIONS (L x W): 23 x 29 inches; height is adjustable from 31 to 41 inches. The walker folds to 23 x 9.5 inches. WEIGHT: 14 pounds.

  51. ROUND BATH STOOL Picture of ROUND BATH STOOL

    The Round Bath Stool is a bathtub stool designed for use by individuals with mobility and balance disabilities. Designed for use in narrow tubs and showers, this stool features non-slip rubber tips and height-adjustable aluminum legs that are flared to provide a stable base. DIMENSIONS: The seat height adjusts from 13 to 17 inches and is 13 inches in diameter. The legs are 13.5 inches wide and 13.5 inches deep. CAPACITY: 300 pounds. COLOR: White.

  52. SENTRA DUAL AXLE

    The Sentra Dual Axle is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. Backrest comes with carry pocket. UPHOLSTERY: Heavy gauge black naugahyde upholstery. ARMRESTS: Padded armrests, with choice of fixed, removable, or removable/adjustable-height full- or desk-length arms. The arms are interchangeable with most Invacare Tracer-style wheelchairs. CASTERS: 8-inch front casters with precision sealed bearings. Front caster forks are adjustable in three positions. WHEELS: Composite mag wheels with precision sealed bearings, chrome-plated hand rims, and standard dual axle. FOOTRESTS: Aluminum footplates with optional swing-away footplate extensions and swing-away elevating legrest with padded calf pads. Front riggings are interchangeable with most Invacare Tracer-style wheelchairs. WARRANTY: Limited lifetime warranty.

  53. SENTRA EC

    Sentra EC is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. UPHOLSTERY: Double embossed blue vinyl upholstery. ARMRESTS: Padded armrests with choice of fixed or removable full- or desk-length arms. CASTERS: Optional Hemi spacing front riggings. WHEELS: Urethane tires mounted on composite wheel with sealed precision bearings and plastic handrims. FOOTRESTS: Plastic footplates with a choice of fixed or swing-away footrest or swing-away elevating legrest. WARRANTY: Limited 3-year warranty.

  54. SENTRA FULL RECLINING WHEELCHAIR

    The Sentra Full Reclining Wheelchair is a reclining manual wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish, hydraulic reclining mechanism, anti-tippers, headrest extension, and dual axle to allow transition of the seat to hemi-level. SEAT: 16-, 18-, or 20-inch width with full reclining back. UPHOLSTERY: Heavy gauge black naugahyde upholstery. ARMRESTS: Padded armrests with choice of removeable or removeable/ adjustable-height full- or desk-length arms. CASTERS: 8-inch front casters with caster forks adjustable in three positions. WHEELS: Composite mag wheels with chrome-plated hand rims and precision wheel bearings. FOOTRESTS: Aluminum footplate with optional swingaway footplate extensions and swing-away elevating legrest with calf pads. WARRANTY: Limited lifetime warranty.

  55. SENTRA HEAVY-DUTY

    Sentra Heavy Duty is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with triple-coated chrome finish and reinforced side frame, dual cross bars, and reinforced steel gussetts at all weight-bearing points. A dual axle allows the seat to be lowered to hemi height. SEAT: 20-, 22-, or 24-inch width. Carry pocket in backrest. UPHOLSTERY: Heavy-gauge black naugahyde upholstery. ARMRESTS: Padded armrests with choice of removeable or removeable/adjustable-height full- or desk-length arms. CASTERS: 8-inch front casters with reinforced caster journals. WHEELS: Composite mag wheels with precision-sealed wheel bearings and dual axle. FOOTRESTS: Aluminum footplates, with optional swing-away footplate extensions and swing-away elevating legrest with calf pads. WARRANTY: Limited lifetime warranty.

  56. SENTRA PLUS

    Sentra Plus is an adult manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. SEAT: 16- or 18-inch width. Backrest with carry pocket. Dual axle provides transition of seat to hemi-level. UPHOLSTERY: Double-embossed black vinyl upholstery. ARMRESTS: Padded armrests with choice of removeable or removeable/adjustable-height full- or desk-length arms. CASTERS: Front caster forks with three height positions. WHEELS: Composite mag wheels with precision-sealed wheel bearings and dual axle. FOOTRESTS: Aluminum footplates and optional swing-away footplate extensions or elevated legrest with calf pads. WARRANTY: Limited lifetime warranty.

  57. SPARKLE CANE AND CRUTCH TIPS Picture of SPARKLE CANE AND CRUTCH TIPS

    The Sparkle Cane and Crutch Tips are cane and crutch tips designed for use by individuals who use canes or crutches. These tips are designed to glow in the dark. DIMENSIONS: These tips fit canes and crutches that are .75 inches in diameter. COLOR: Blue, green, pink, or tan.

  58. SUCTION GRAB BAR, ADJUSTABLE LENGTH Picture of SUCTION GRAB BAR, ADJUSTABLE LENGTH

    The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. SIZES: Small, medium, or large. OPTIONS: Replacement suction cups are available. DIMENSIONS: The small bar adjusts from 17.25 inches to 22.2 inches long. The medium bar adjusts from 21.75 inches to 26.75 inches long. The large bar adjusts from 25.75 inches to 30.75 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: The small bar weighs 0.8 pound, the medium bar weighs 1.2 pounds, and the large bar weighs 1.6 pounds. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three years on the grab bar and one year on the suction cups.

  59. SUCTION GRAB BAR, FIXED LENGTH Picture of SUCTION GRAB BAR, FIXED LENGTH

    The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups are available. DIMENSIONS: The bar is 12.75 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 1 pound. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three years on the grab bar and one year on the suction cups.

  60. SUNFIRE PLUS POWER REAR WHEEL DRIVE WHEELCHAIR BASE Picture of SUNFIRE PLUS POWER REAR WHEEL DRIVE WHEELCHAIR BASE

    The Sunfire Plus Power Rear Wheel Drive Wheelchair Base is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 39 x 24 inches. Available in blue, red, or gold, the chair is equipped with 2-inch solid rear-mounted anti-tip wheels. CONTROLS: Programmable PG controller with adjustable joystick mount. RWD: Two-motor rear wheel drive. SEAT: Swivel and reclining captain's seat with adjustable headrest and seat belt. ARMRESTS: Flip-back padded armrests are height-, angle-, and width- and depth-adjustable. BRAKES: Electronic regenerative brakes. CASTERS: 8-inch solid articulating casters. WHEELS: 10-inch solid tires. FOOTRESTS: Adjustable height footplate. POWER: Uses two, U1 34 AMP batteries (included) with 4 AMP, fan-cooled, on-board chargers. SPEEDS: 6 miles per hour for a range of up to 20 miles. CAPACITY: 300 pounds. WEIGHT: The base weighs 62 pounds, the seat weighs 35 pounds, and the batteries weigh 24.2 pounds each. WARRANTY: Lifetime warranty on frame, one-year warranty on electronic controller and drive train components, and six-month warranty on battery (from date of installation).

  61. THERMAL MOIST HEATING PAD Picture of THERMAL MOIST HEATING PAD

    The Thermal Moist Heating Pad is a heating pad designed for use by individuals with arthritis, sprains and strains or other upper extremity disabilities or injuries. Features include a positioning strap with Velcro-type closure, four heat and time settings, automatic shut off and hand control mechanism, and an outer flannel cover that draws and retains the air’s humidity. SIZES: Standard, medium, and petit. DIMENSIONS (LxW): The standard pad is 14 x 27 inches, the medium pad is 14 x 14 inches, and the petit pad is 7 x 15 inches.

  62. VALUE LINE ROLLING WALKER Picture of VALUE LINE ROLLING WALKER

    The Value Line Rolling Walker is a folding rollator designed for use by individuals with walking or balance disabilities. This walker has a one-hand folding feature. Other features include height-adjustable handgrips with loop hand brakes, a padded seat, an under-seat carrying pouch, and a removable padded, contoured backrest. DIMENSIONS: Casters are 6 inches in diameter. CAPACITY: 300 pounds. WEIGHT: 14 pounds. COLOR: Available in blue or red.

  63. VICTORY 10 3-WHEEL SCOOTER (MODEL SC610) Picture of VICTORY 10 3-WHEEL SCOOTER (MODEL SC610)

    The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18 or 20 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 3.5 x 10 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 15.5 miles on a single charge. CAPACITY: 400 pounds. WEIGHT: 176.5 pounds with batteries and 131.5 pounds without batteries. When disassembled, the heaviest piece is 54.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  64. VICTORY 10 4-WHEEL SCOOTER (MODEL SC710) Picture of VICTORY 10 4-WHEEL SCOOTER (MODEL SC710)

    The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18, 20 or 22 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 3.5 x 10 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 15.5 miles on a single charge. CAPACITY: 400 pounds. WEIGHT: 179.5 pounds with batteries and 132.5 pounds without batteries. When disassembled, the heaviest piece is 61 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  65. VICTORY 9 3-WHEEL SCOOTER (MODEL SC609) Picture of VICTORY 9 3-WHEEL SCOOTER (MODEL SC609)

    The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18 or 20 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch rear solid tires; and 8 inch front solid tire. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 166.5 pounds with batteries and 117.5 pounds without batteries. When disassembled, the heaviest piece is 48.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  66. VICTORY 9 4-WHEEL SCOOTER (MODEL SC709) Picture of VICTORY 9 4-WHEEL SCOOTER (MODEL SC709)

    The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18, 20 or 22 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 180 pounds with batteries and 131 pounds without batteries. When disassembled, the heaviest piece is 45 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  67. VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS) Picture of VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS)

    The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches foldable molded plastic seat with foam inserts. The back height is 14.5 inches. The height of the seat is adjustable up to 6 inches using a standard powered elevating system. UPHOLSTERY: Black vinyl only. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch rear solid tires; and 8 inch front solid tire. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.5 miles per hour; the maximum speed is reduced when the height of the seat is raised by 3 inches or more. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 180 pounds with batteries and 131 pounds without batteries. When disassembled, the heaviest piece is 59.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  68. VIPER

    The Viper is a lightweight wheelchair designed for use by children or adults with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish. Dual axle allows transition of seat to hemi-level. SEAT: 12-, 14-, 16-, 18-, or 20-inch width. UPHOLSTERY: Heavy gauge flame-retardant black nylon upholstery. ARMRESTS: Flip back arms in full or desk style; 16- to 20-inch wide seats are also available with flip back/adjustable-height armrests. CASTERS: Urethane front casters with caster forks adjustable in three positions. WHEELS: Composite mag rear wheels with urethane tires and precision-sealed wheel bearings. FOOTRESTS: Aluminum footplates. WEIGHT: 32 pounds, excluding front rigging. WARRANTY: Limited lifetime warranty.

  69. VIPER PLUS

    Viper Plus is a lightweight wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and adjustable anti-tipper with wheels. SEAT: 16, 18, 20, or 22 inches wide. The back angle adjusts from 5 to 20 degrees, and the back height adjusts from 15 to 21 inches in two-inch increments. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Adjustable-height, flip-back, removable padded armrests in full or desk style. CASTERS: Urethane front casters with caster forks with three height adjustments. WHEELS: Composite mag-style wheels with urethane rear tires and precision-sealed wheel bearings. Adual axle allows transition of the seat to hemi level. FOOTRESTS: Composite footplates. WEIGHT: 32 pounds, excluding front rigging. WARRANTY: Limited lifetime warranty.

  70. VIPER PLUS RECLINING WHEELCHAIR

    The Viper Plus Reclining Wheelchair is a lightweight reclining wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and hydraulic reclining mechanism. SEAT: 16, 18, or 20 inches wide. UPHOLSTERY: Heavy- gauge flame-retardant black nylon upholstery. ARMRESTS: Padded nylon armrests and flip-back arms. Choice of full- or desk- style with or without height adjustability. CASTERS: Urethane front casters with three-position adjustable caster forks. WHEELS: Mag wheels with urethane rear tires and precision-sealed wheel bearings. A dual axle allows transition of the seat to a hemi level. FOOTRESTS: Composite footplates with optional swing-away footplate extensions, swing-away elevating legrests, and calf pads. WEIGHT: 51 pounds, excluding front rigging. WARRANTY: Limited lifetime warranty.

  71. WINNIE GO LITE 3 WHEELED ROLLATOR Picture of WINNIE GO LITE 3 WHEELED ROLLATOR

    The Winnie Go Lite 3 Wheeled Rollator is a folding wheeled walker designed for use by individuals with walking disabilities. This lightweight rollator is equipped with three large wheels with solid tires that roll on most surfaces. Other features include ergonomic height adjustable handles, loop hand brakes that lock to hold the rollator in place, and a removable carrying pouch. Once folded, the rollator fits into a car or closet for storage and transportation. DIMENSIONS (HxLxW): 29 x 24 x 39 inches. The handle height adjusts from 32 to 39 inches. CAPACITY: 300 pounds. WEIGHT: 9 pounds. COLOR: Red or blue.

  72. WINNIE LITE SUPREME ALUMINUM ROLLATOR Picture of WINNIE LITE SUPREME ALUMINUM ROLLATOR

    The Winnie Lite Supreme Aluminum Rollator is a three-wheeled rollator designed for use by individuals with walking or balance disabilities. This folding rollator has height adjustable handles with adjustable loop lock brakes, a carry pouch, and lightweight solid wheels. OPTIONS: Carrying basket. DIMENSIONS(HxWxD): 30 x 24 x 24 inches. The handle height adjusts from 32 to 39 inches to accommodate users 5 feet, four inches tall to six feet tall. The casters are 7.5 inches in diameter. WEIGHT: 11 pounds. CAPACITY: 300 pounds. COLOR: Blue, red, forest green, black, tan plaid, flame red, or flame blue. WARRANTY: Lifetime limited warranty on the frame and a lifetime warranty on the brake cable.

  73. WINNIE WALKER MIMI LITE DELUXE (MODELS 541, 542, 543, 544, 545, & 548) Picture of WINNIE WALKER MIMI LITE DELUXE (MODELS 541, 542, 543, 544, 545, & 548)

    The Winnie Walker Mimi Lite Deluxe is a four-wheeled rollator designed for indoor or outdoor use by individuals with walking or balance disabilities. This folding walker features large wheels, loop-lock hand brakes, and adjustable-height handles with ergonomic grips. Standard equipment includes a padded seat; a padded backrest; and a carrying pouch. OPTIONS: Basket. DIMENSIONS (WxDxH): The seat is 13.5 x 12.5 x 21 inches. The frame is 23 inches wide x 23 inches long. The handle height adjusts from 32 to 38 inches. The wheels are 6 inches in diameter. WEIGHT: 13 pounds. CAPACITY: 300 pounds. COLOR: Flame red (model 543), flame blue (model 544), red (model 545), green (model 541), blue/grey (model 542), or tan plaid (model 548). WARRANTY: Limited lifetime warranty.

  74. WINNIE WALKER MIMI LITE ELITE (MODELS 586 & 587) Picture of WINNIE WALKER MIMI LITE ELITE (MODELS 586 & 587)

    The Winnie Walker Mimi Lite Elite is a four-wheeled rollator designed for indoor or outdoor use by individuals with walking or balance disabilities. This folding walker features large wheels, loop-lock hand brakes, and adjustable-height handles with ergonomic grips. Standard equipment includes a padded seat; a padded backrest; and a carrying pouch. OPTIONS: Basket. DIMENSIONS (WxDxH): The seat is 12 x 12 x 21 inches. The frame is 23 inches wide x 24 inches long. The handle height adjusts from 32 to 38 inches. The wheels are 6 inches in diameter. WEIGHT: 19 pounds. CAPACITY: 300 pounds. COLOR: Champagne (model 586) or forest green (model 587). WARRANTY: Limited lifetime warranty.

  75. WINNIE WHEELCHAIR

    The Winnie Wheelchair is a manual adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Black powder-coated steel frame. UPHOLSTERY: Embossed black vinyl upholstery. ARMRESTS: Plastic arms. CASTERS: Hanger bracket to accommodate Hemi spacing rigging. WHEELS: Urethane tires mounted on composite wheel with sealed precision bearings and composite hand-rims. FOOTRESTS: Plastic calf pads and footplates. WARRANTY: 3-year limited warranty.

  76. Z26

    The Z26 is a lighweight wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Aluminum alloy and carbon steel frame with a powder-coated, liquid crystal (K5) iridescent blue finish. Additional features include adjustable tension back supports and anti-tippers. SEAT: 16 or 18 inches wide. CUSHION: 2-inch nylon-covered foam seat cushion. UPHOLSTERY: Heavy-gauge flame-retardant nylon upholstery. The back upholstery is removable. ARMRESTS: Flip-back, removeable arms with padded armrests, in desk or full style. CASTERS: Urethane front casters with three-position adjustable caster forks. WHEELS: Composite mag wheels with urethane tires and precision-sealed wheel bearings. The chair also features a quick-release rear axle and Multi Axle to allow seat transition to a hemi position. FOOTRESTS: Composite footplates with optional swing-away footplate extensions and swing-away elevating legrests with calf pads. WEIGHT: 30 pounds, excluding front riggings. WARRANTY: Limited lifetime warranty.

See Liberty Wheels products that are no longer available.

  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.