Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu

TSS Equipment, LLC

14302 Pigeon River Road
Cleveland, Wisconsin 53015
United States
Telephone: 920-565-3273.
Web: http://www.tssatcsales.com/.
Email: sales@tssatcsales.com.

Products distributed by TSS Equipment, LLC (listed alphabetically)

  1. ACTION TRACKCHAIR (MODEL SM)

    The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair and two on the back of the chair. CONTROLS: Joystick controls that can be mounted at the front of either armrest. SEAT: The seat width is 14 inches between the armrests. The seat height is 24 inches. A lap belt is standard. ARMRESTS: Standard with no padding WHEELS: Two caterpillar tracks (LxW), 90 x 6.5 inches. FOOTRESTS: Adjustable footrests are standard; flip-up footrests are available. POWER: Uses two 12-volt rechargeable wheelchair batteries. An 8 amp battery charger is included. This chair is equipped with a 24-volt direct current (DC) 24:1 ratio high thrust motor. SPEEDS: 4 to 6 mph. the maximum range is 10 miles. WEIGHT: 350 pounds. WARRANTY: One year warranty.

  2. ACTION TRACKCHAIR (MODEL ST)

    The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair and two on the back of the chair. CONTROLS: Joystick controls that can be mounted at the front of either armrest. SEAT: The seat width is 18, 20, 22 or 24 inches between the armrests. The seat height is 24 inches. The seat tilts 20 degrees forward or backward. A lap belt is standard. ARMRESTS: Standard with no padding WHEELS: Two caterpillar tracks (LxW), 90 x 6.5 inches. FOOTRESTS: Adjustable footrests are standard; flip-up footrests are available. POWER: Uses two 12-volt rechargeable wheelchair batteries. An 8 amp battery charger is included. This chair is equipped with a 24-volt direct current (DC) 24:1 ratio high thrust motor. SPEEDS: 4 to 6 mph. the maximum range is 10 miles. WEIGHT: 350 pounds. WARRANTY: One year warranty.

  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.