Products are listed alphabetically.

Page 1 of 2    Next page »

1. ABLEWARE SHOEHORN WITH T HANDLE The ABLEWARE Shoehorn with T Handle is a long handled shoe horn designed for use by individuals who have difficulty bending to put on shoes and who have arthritis or other disabilities of the hand. The T-shaped handle reduces the need for the user to fully close the hand or rotate the wrist. DIMENSIONS: 19.5 inches long. WEIGHT: 0.218 pounds....[More Information]
   
   
2. ASSISTIVE DEVICE KIT (MODEL A665322) The Assistive Device Kit, model A665322, is a long-handled sponge, long-handled shoe horn, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity and mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; and a long-handled shoe horn....[More Information]
   
   
3. COLLAPSIBLE SHOE HORN (MODEL SW3150) The Collapsible Shoe Horn, model SW3150, is a long-handled sho horn designed for use by individuals with arthritis or other lower extremity disabilities. This device consists of a short, clip-on shoe horn attached to a long string with a ball grip handle. To use, the shoe horn clips to the back of the shoe, the shoe is lowered to the floor with the string, and the shoe horn is used to guide the foot into the shoe. The shoe horn is then loosened and removed by tugging on the string. DIMENSIONS: T...[More Information]
   
   
4. COMBINATION DRESSING STICK AND SHOEHORN The Combination Dressing Stick and Shoehorn is a long-handled and shoehorn and dressing stick designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of hard, durable plastic, this device features a large angled hook that holds and pulls clothing, and a long, notched shoehorn at the opposite end for removing socks. This aid also features a push/pull pointer for opening and closing drawers and doors, turning on and off light switches, and retrievi...[More Information]
   
   
5. COMPLETE HIP KIT (MODEL A665-320) The Complete Hip Kit is designed for use by individuals who have had a hip replacement or who have mobility disabilities. The kit includes a Savanah Toilet Seat (see also separate entry), a long-handled sponge for bathing, a dressing stick, a long-handled shoe horn, a Sock Notch sock aid to assist in putting on socks without bending, and a standard-size Handi-Reacher (see separate entry). DIMENSIONS: The Savanah Toilet Seat is 4 inches tall,...[More Information]
   
   
6. CUSHION GRIP SHOEHORNS (MODELS 30035, 30036, 30037, 30038 & 30039) Cushion Grip Shoehorns are long-handled shoehorns and shoehorns with built up handles to assist people with difficulty in bending and grasping in donning and removing shoes. All models have padded foam handles with a rope loop. DIMENSIONS: Model 30035 is 12 inches long, model 30036 is 18 inches long, model 30037 is 24 inches long, model 30038 is 30 inches long, and model 30039 is 36 inches long. The foam handles are 5.5 inches thick. WARRANTY: The manufacturer warrants this product against defec...[More Information]
   
   
7. DIY DEVICE TO ASSIST WITH GETTING DRESSED -------- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself assistive device for individuals with arthritis, recovering from surgery, and/or limited flexibility to dress themselves. Step 1: Use duct tape to fasten the wood block to the pole. Attach the wood block about 2 inches from the end of the pole and secure the block with tape at the top and bottom. Ensure the block is sturdy and unlikely to move. Duct tape makes this project quick and easy to complete without drilling any ...[More Information]
   
   
8. DRESSEZ DressEZ is a combination long-handled shoe horn with a built up handle and dressing stick designed to assist people with difficulty bending or other physical disabilities in performing dressing tasks. The DressEZ has a push-pull "S" hook at one end with smooth, round edges, and a rubberized coating. The shoehorn at the other end also has smooth, rounded edges. The intervening shaft is thick for ease in grasping. DIMENSIONS: 24 inches long....[More Information]
   
   
9. E-Z SLIDER SHOEHORNS E-Z Slider Shoehorns are long-handled shoehorns designed to assist people who have difficulty bending with donning and removing shoes. Fabricated of Thera-coated spring steel, the shoehorns have non-slip handle grips. DIMENSIONS: Shoehorns are available in 12-, 18-, 24-, 30-, and 36-inch lengths. The handle grips are 6 inches long. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase....[More Information]
   
   
10. ECONO-COMBER, ECONO-REACHER, & ECONO-SHOEHORN DRESSING AIDS (MODELS 30016, 30017 & 30018) The Econo Line Dressing Aids are long-handled shoehorns, long-handled hooks, and dressing sticks designed to assist people with physical disabilities with various dressing needs. The Econo-Combo (model 30016) includes a combination push/pull/pointer hook at one end and a shoehorn and hook at other end. The Econo-Reacher (model 30017) includes a baked epoxy coated push/pull/pointer hook at one end, and a leather thong at the other. The Econo-Shoehorn (model 30018) includes a coated shoehorn and h...[More Information]
    
    
11. EXTRA LONG SHOEHORN (MODEL DA-5112) The Extra Long Shoehorn, model DA-5112, is a long handled shoe horn designed for use by individuals who cannot bend over to reach their feet. This extra long shoehorn has a non-slip vinyl handle and a nylon storage loop. DIMENSIONS (LxW): 610 x 30 millimeters. WEIGHT: 168 grams....[More Information]
    
    
12. EZ SHOE ON (MODELS 365 & 385) EZ Shoe On (models 365 and 385) are long handled shoe horns that allow the user to grip heel of shoe and pull the shoe on. The shoe horns have trigger action gripand may be used as a combination shoe horn, gripper and reacher. DIMENSIONS: Horns have 20 to 30 inch stalks....[More Information]
    
    
13. FEATHERWEIGHT SHOEHORN REACHER The Featherweight Shoehorn Reacher is a reacher with integral shoehorn designed for use by individuals with lower extremity or mobility disabilities. This aluminum reacher had a pistol grip with a hook trigger to open the GripCert jaws. The shoehorn extends over the top jaw and up the shaft, creating a long-handled shoehorn. DIMENSIONS: 32 inches long. The jaws are 3 inches wide. WEIGHT: 8 ounces. ...[More Information]
    
    
14. FOAM-HANDLED SHOEHORN (MODELS A71551 & A71552) The Foam-Handled Shoehorn is a long-handled shoe horn with a built-up handle designed for use by individuals with arthritis, hip replacement, or mobility disabilities or grasping disabilities. This shoe horn has a coated steel shaft to prevent it from sticking to skin or clothing and minimal curve for ease of insertion or removal. The foam handle has a hanging loop. DIMENSIONS: Model A71551 is 18 inches long and model A71552 is 24 inches long. The shoe horn has a four-inch handle. COLOR: The han...[More Information]
    
    
15. HEALTHSMART ADJUSTABLE TELESCOPING SHOE HORN The HealthSmart Telescoping Adjustable Shoe Horn is a long handled shoe horn designed for use by individuals with lower extremity or mobility disabilities or arthritis. This shoe horn telescopes guides the user’s foot into his or her shoe without bending. Other features include a locking safety ring, and storage eyelet. The Telescoping Adjustable Shoe Horn can be used while sitting or standing. DIMENSIONS: Length adjusts from 21.88 to 32.38 inches. ...[More Information]
    
    
16. HELPING HAND SHOE HELPER / REACHER, THE The Helping Hand Shoe Helper/Reacher is a combination long handled shoe horn and reacher designed for use by individuals with arthritis, hip replacement, and other mobility and lower extremity disabilities. This lightweight anodized aluminum reacher features an ergonomic pistol grip, a curved trigger, a single rubber-lined claw, and an integrated shoe horn attached to the top. The claw secures the shoe and the shoe horn assists in putting on the shoe without requiring the user to bend. The gripp...[More Information]
    
    
17. HIP KIT III (MODEL 665-321) The Hip Kit III, model 665-321, is a long-handled sponge, long-handled shoe horn, dressing stick, sock aid, and a reacher designed for use by individuals with reduced reaching capabilities, including individuals with upper extremity, hip replacement, mobility disabilities. The set includes a standard Handi-Reacher; a round, long-handled sponge; a dressing stick; a Sock Notch; and a long-handled shoe horn. DIMENSIONS: The Handi-Reacher is 24 inches long. The dressing stick is 26 inches long, and ...[More Information]
    
    
18. LONG COATED STEEL SHOEHORN The Long Coated Steel Shoehorn is designed for use by individuals with mobility disabilities or who have difficulty bending. This extra-long shoehorn has a notch at the end to aid in removing shoes. DIMENSIONS: 23.5 inches long....[More Information]
    
    
19. LONG SHOE HORNS (MODELS F73823-0000 & F73823-0001) The Long Shoe Horns are designed for persons who have trouble bending to put on their shoes or to remove their socks. Model F73823-0000 is an epoxy-coated steel shoehorn with curved handle and a notch at the end for removing socks. Model F73823-0001 is the same as above, but made of delux epoxy-coated steel with soft vinyl on the handle for non-slip grip. DIMENSIONS: Both models are 23.5 inches long....[More Information]
    
    
20. LONG SHOEHORN --- DO IT YOURSELF --- PURPOSE: To produce a long-handled shoe horn designed for use by individuals who have disabilities which prevent bending or stretching to put on shoes. Cut a piece of 4-inch-diameter PVC pipe in half lengthwise with a bandsaw to provide a lightweight curve for any length of a shoehorn. After heating the pipe, attach a hook on one end for reaching or dragging. MATERIALS: Length of 4-inch diameter PVC pipe. TOOLS: Bandsaw. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURN...[More Information]
    
    
21. LONG SHOEHORN The Long Shoehorn is a plastic long-handled shoehorn designed to assist individuals with back problems or other conditions which hinder bending over to put on shoes. This aid has a curved handle and a hanging hole. DIMENSIONS: 17.5 inches long....[More Information]
    
    
22. NO STOOP SHOEHORN (MODEL 7020) The No Stoop Shoehorn, model 7020, is a long-handled shoe horn designed to assist individuals who find it difficult to bend over. The shoehorn is made of chrome plated steel. DIMENSIONS: 24 inches long....[More Information]
    
    
23. NORCO PLASTIC SHOEHORN WITH HOOK (MODEL NC28590) The Norco Plastic Shoehorn with Hook, model NC28590, is a long-handled shoe horn with a curved handle for an easier grip. The shoehorn includes a nylon loop for hanging. DIMENSIONS: 16.25 inches long....[More Information]
    
    
24. PLASTIC SHOEHORN (MODELS A7153 & A7154) The Plastic Shoehorn, models A7153 and A7154 is a long-handled shoe horn designed for use by individuals with arthritis, hip replacement, or mobility disabilities. Model A7153 has a hanging loop at the top and model A7154 has a curved handle for a secure grip. DIMENSIONS: Model A7153 is 18 inches long and model A7154 is 16.5 inches long....[More Information]
    
    
25. SHOE & BOOT VALET The Shoe & Boot Valet is a shoe aid designed for use by individuals with lower extremity or mobility disabilities, arthritis, or back pain. This device has a molded nylon handle, an aluminum shaft, and a rubber-lined, one-size-fits-all Boot Jack gripper that holds the heel or toe of the shoe as the user's foot slips in or out. Minimal grip strength is needed. The gripper is rubber lined to prevent slippage or damage to foot wear. WEIGHT: Just over 1 pound. WARRANTY: 5 years....[More Information]
    
    

Page 1 of 2    Next page »