Products are listed alphabetically.

Page 1 of 1

1. CHILD'S FULL SUPPORT SWING SEAT --- DISCONTINUED. (Verified 6/2003) RETAINED IN DATABASE FOR REFERENCE. --- The Child Full Support Swing Seat is a swing with torso support designed for use by children with physical disabilities. The one-piece rigid swing features a high back, torso safety straps, and a moded leg separator for appropriate positioning. OPTIONS: A headrest and a seat liner are available. DIMENSIONS (WxH): 17 x 27 inches....[More Information]
   
   
2. CRADLE SWING (MODEL PC 4853) --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Cradle Swing, model PC 4853, is a swing that enables children, adolescents, and small adults who cannot use conventional swings, swing in a reclined or semi-reclined position. The cradle-shaped swing features two clear, round windows on each side for visibility. Made of mylon-reinforced material, the swing has padded ends and suspension ropes long enough to allow the head end to be raised. DIMENSIONS (HxWxD): 57 x 2...[More Information]
   
   
3. ENVIRONMENT 1000, ENVIRONMENT 2000. --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Modular playground systems of 4 by 4 inch pressure treated pine. Environment 1000 includes platform with tent, swing, sandbox and slide. Environment 2000 includes swing, slide ladder platform and monkey bars. Can be purchased with or without these elements....[More Information]
   
   
4. EQUILIBRIUM SWING (MODEL 02820) --- DISCONTINUED. (Verified 03/94) RETAINED IN DATABASE FOR REFERENCE. --- Swing. Provides simultaneous movement in vertical and horizontal planes. Trains flexormotor pattern and equilibrium reactions. Nonslip padded wooden seat suspended from nylon ropes attached to .5 inch shock cable....[More Information]
   
   
5. FRONT OPENING EXERGLIDE --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Swing for nonambulatory riders. Front bar unlatches and swings forward to permit access to swing. Galvanized steel with front and rear bars to prevent falls and center grab bar for use when entering swing. Swing moves by pumping arm handles. Hangers formed to fit single or double top pipe. Tapered polyurethane seat. Available in units with one or two swings. Seat height designed at standard wheelchair height. Includes adjustable seat belt...[More Information]
   
   
6. HAMMOCK SWING (MODEL HAM-G) --- DISCONTINUED (VERIFIED 1/2009). RETAINED IN DATABASE FOR REFERENCE. --- The Hammock Swing, model HAM-G, is a hammock suspension swing designed for use in sensory integration activities. The hammock seat supports the user in an upright sitting position. CAPACITY: 300 pounds. COLOR: Green and white....[More Information]
   
   
7. HIGH-BACKED SWING SEAT (MODELS HBSS-S, HBSS-M, & HBSS-L) --- DISCONTINUED (VERIFIED 1/2009). RETAINED IN DATABASE FOR REFERENCE. --- The High-Backed Swing Seat is a swing designed for use by children who require a high level of support for the back and head. The seat is made of hard plastic with a built-in molded pommel and features steel support tubes and a rope harness for hanging. DIMENSIONS (WxLxH): The small seat 13 x 11 x 22 inches; the medium seat is 17 x 13 x 27 inches; the large seat is 20 x 16 x 32 inches. OPTIONS: A headrest is available fo...[More Information]
   
   
8. POSISWING --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Child's swing can be used where regular swings are in place, or alone. Provides proper positioning and support. Portable and available in a variety of sizes and colors....[More Information]
   
   
9. RIFTON ADJUSTABLE CHAIR FOR SWING (MODEL GE431) --- DISCONTINUED. (VERIFIED 5/96) RETAINED IN DATABASE FOR REFERENCE.--- The Rifton Adjustable Chair for Swing, model GE431, is designed to provide therapeutic vestibular stimulation while maintaining proper body alignment of children up to 50 inches tall. The swing includes adjustable chair, 3/8-inch Dacron ropes, head support blocks, a seatbelt, and leg straps. The swing is designed to be used with the Rifton Swing Frame, model GE451 ($615). The seat and back adjust from vertical to horizontal...[More Information]
   
   
10. RIFTON NET FOR SWING (MODEL GE421) --- DISCONTINUED. (Verified 3/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Net for Swing, model GE421, is designed to provide therapeutic vestibular stimulation for children and adults. The swing is designed to be used with the Rifton Swing Frame, model GE451 ($615). The net comes complete with wooden spreader bars, frame, net, chain, and four snap hooks. The net is fabricated of nylon. The spreader bars facilitate putting the child or adult into the net. CAPACITY: Maximum working lo...[More Information]
    
    
11. RIFTON PLATFORM FOR SWING (MODEL GE461) --- DISCONTINUED. (Verified 3/2000) RETAINED IN DATABASE FOR REFERENCE. ---The Rifton Platform for Swing, model GE461, is designed to provide a swing tilt board for children to practice balance in a sitting prone or kneeling position. The unit consists of a platform swing suspended by 3/8-inch Dacron ropes. It is designed for use with the Rifton Swing Frame, model GE451 ($615). The platform height adjusts independently at each corner, and the suspension system permits the platform to swing and t...[More Information]
    
    
12. RIFTON SWING COMBINATION (E45) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Set including platform swing, toddler swing, hammock swing, frame and both sets of ropes. See individual swing entries for details....[More Information]
    
    
13. RIFTON TODDLER CHAIR FOR SWING (MODEL GE471) ---DISCONTINUED. (VERIFIED 5/96) RETAINED IN DATABASE FOR REFERENCE.--- The Rifton Toddler Chair for Swing, model GE471, is designed to provide children 32 to 38 inches tall a combination of swinging with positioning capability. The unit consists of a solid maple and birch chair, 3/8-inch Dacron ropes, and a hip strap. The chair has an adjustable foot ledge and a safety cross bar to keep the child in the swing. The unit is designed for use with the Rifton Swing Frame, model E451 ($550.00). ACCES...[More Information]
    
    
14. SWING FRAME (MODEL SS-F) --- DISCONTINUED (VERIFIED 1/2009). RETAINED IN DATABASE FOR REFERENCE. --- The Swing Frame, model SS-F, is designed for outdoor recreational and therapeutic use. This two-position heavy- duty frame is made of galvanized and cadmium-plated heavy-gauge steel and has twisted stakes for maximum stability....[More Information]
    
    
15. SWING PULL BEAM (MODEL PC 4852) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Swing Pull Beam, model PC 4852, is a swing adaptation that allows users with some upper body strength to power their own swing. The Beam attaches to the cross bar of the swing frame and has an extension that reaches to the user....[More Information]
    
    
16. SWING SEAT (MODEL SS-1) --- DISCONTINUED (VERIFIED 1/2009). RETAINED IN DATABASE FOR REFERENCE. --- The Swing Seat is a swing designed for use by children who have good head control but need a solid seat and support belts to maintain positioning. The seat is made of hard plastic and features steel support tubes and a rope harness for hanging. DIMENSIONS (WxLxH): 12 x 9 x 11 inches....[More Information]
    
    
17. SWING SEAT (MODELS TF 8411 & TF 8412) --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- Swing seat for those requiring additional trunk support. Adjustable height and angle molded fiberglass seat includes a pommel. Seat belt and chest harness included. Comes with hanging ropes and attaches easily to swing frame. Child seat: 13 inches wide by 11 inches deep by 22 inches high. Adult seat: 20 inches wide by 16 inches deep by 33 inches high....[More Information]
    
    
18. SYMPATHETIC SWING. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Swing structure. Two sling swings, one polypropylene, the other mesh rope. Both suspended from plastic coated steel cables. Each swings cable attaches to U shaped bar and bars are joined to each other. Swinging on one swing, moves other swing. Swing system suspended from 3 1/2 inch diameter painted galvanized steel frame 7 feet 6 inches high and long. Special footings allow swing to be moved indoors or outdoors easily. Can be installed on...[More Information]
    
    

Page 1 of 1