Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Products are listed alphabetically.

Page 1 of 1

  1. ADULT DELTA POWER STAND BASIC & ADULT DELTA POWER STAND MOBILE --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Adult Delta Power Stand Basic and the Adult Delta Power Stand Mobile are standing frames designed for use by individuals with mobility disabilities. Both models accommodate individuals from 61.86 inches tall to 78.8 inches tall. The Basic model is a statioary frame The mobile model features a belt-drive system to provide the user with independent mobility while standing. Both models feature a steel frame, a knee pad...[More Information]

  2. BAC 1000 & BAC 2000 --- DISCONTINUED. (Verified 05/94) RETAINED IN DATABASE FOR REFERENCE. --- Mobile prone standing device with 20, 22, 24 or 26 inch quick release mag style drive wheels and four 5 1/2 inch spring loaded casters front and back. Power tilt feature allows user to change angle in space independently, providing access to variety of surface heights, with linear actuator and 2 12 volt gel batteries. Adjustable positioning supports. BAC 1000 for child with maximum weight of 65 pounds, maximum height of 5...[More Information]

  3. DYNAMIC STANDER (MODELS K15 & K17) --- DISCONTINUED. (Verified 2/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Dynamic Stander is a mobile standing aid designed for use by individuals with mobility disabilities. This unit includes wheelchair-style rear wheels to enable self-propulsion while standing. The drive wheels are removable for close access to tables. The unit also has four large-diameter casters (two front and two rear) for stability and mobility when the drive wheels are removed. The basic unit features a padd...[More Information]

  4. DYNAMIC STANDER (MODEL K180) --- DISCONTINUED (VERIFIED 2/2009). RETAINED IN DATABASE FOR REFERENCE. ---The Rifton Dynamic Stander, model K180, is a mobile standing aid designed for use by youth and adults with mobility disabilities. Designed for users 55 to 72 inches tall, this stander enables self-propulsion using an upper drive wheel on each side; the drive wheels are connected by belts to two wheels that actually contact the ground, preventing the user's hands from becoming dirty. The padded body support height is adjus...[More Information]

  5. DYNAMIC STANDER (MODELS K11 & K13) Picture of DYNAMIC STANDER (MODELS K11 & K13) --- DISCONTINUED. (Verified 2/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Dynamic Stander is a mobile standing aid designed for use by individuals with mobility disabilities. This unit includes wheelchair-style rear wheels to enable self-propulsion while standing. The unit has four large-diameter casters (two front and two rear) for stability and for mobility when the drive wheels are removed for closer access to tables. The basic unit features a padded body support, foot support, s...[More Information]

  6. MOBILE ADAPTIVE STANDER (MODEL T3565) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- Mobile standing aid fits children 6 months to 15 years with weight capacity up to 200 pounds. Angle adjusts from 0 to 71 degrees by turning a folding crank. User may stay in stander during angle adjustment. Individual footplates with Velcro toe and heel straps accommodate varying leg lengths and foot angles. Footplates may also be adjusted to spread from midline. Vinyl covered, thickly padded knee, pelvic, chest and lat...[More Information]

  7. MOBILIZER, THE ---- DISCONTINUED. (Verified 3/2000) RETAINED IN DATABASE FOR REFERENCE. ---The Mobilizer is a mobile standing aid that provides support and balance for orthopedically or neurologically affected individuals. This system incorporates a custom made or custom fit bodyjacket and mobile standing frame that allows the user to bear weight on his/her legs and walk, either independently or with the aid of orthoses such as Knee-Ankle-Foot Orthoses (KAFO), Anke-Foot Orthoses (AFO), or even reciprocating ga...[More Information]

  8. RIFTON ADULT MOBILE STANDER (MODEL K18) --- DISCONTINUED. (Verified 2/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Adult Mobile Stander, Model K18, is a mobile standing aid designed to afford people who normally use wheelchairs independent mobility in a standing position. The user is supported in a slightly forward-leaning position which frees the arms for use. The stander uses a comfortable strapping system and contoured, padded body support to encourage longer periods of standing. The unit rides on flat-proof tires with ...[More Information]

  9. RIFTON DYNAMIC STANDER (MODELS K110 & K130) Picture of RIFTON DYNAMIC STANDER (MODELS K110 & K130) --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Dynamic Stander is a mobile standing aid designed for use by children with walking or mobility disabilities. Designed to be rolled by the child using it, this stander supports standing from non-weight-bearing to full weight-bearing. Features include a washable bib to keep the body support dry and clean, a soft, fleecy strap for support behind the back or the neck (for older children), and wheel locks to keep ...[More Information]

  10. RIFTON MOBILE STANDERS (MODELS GK12, GK14, & GK16) --- DISCONTINUED. (Verified 3/2000) REPLACED BY RIFTON DYNAMIC STANDERS (SEE SEPARATE ENTRIES). RETAINED IN DATABASE FOR REFERENCE. --- The Rifton Mobile Standers, models GK12, GK14, and GK16, are mobile standing aids for children 30 to 37 inches tall, 37 to 47 inches tall, and 47 to 60 inches tall (respective to the model numbers). These pre-ambulatory standing devices have a strapping system and contoured body support to permit 0 to 100 percent weightbearing with optimal positioning. These dev...[More Information]

  11. RIFTON PEDIATRIC MOBILE STANDERS (MODELS K12, K14, & K16) T--- DISCONTINUED. (Verified 2/2006) RETAINED IN DATABASE FOR REFERENCE. --- he Rifton Pediatric Mobile Stander is a mobile standing aid designed to enable a child without active use of trunk or leg muscles to stand while retaining mobility. The body support is fully padded and adjustable in height, width, and tilt angle. The drive wheels are tilted to bring the top of the wheels under the hands, and the foot plate is height-adjustable for proper positioning. Quick-release axles allow the stande...[More Information]

  12. STAND GO, THE STANDING WHEELCHAIR --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Mobile standing aid or standing wheelchair. Adjustable standing prone board platform with heel, hip and knee stops to keep child in standing position. Unit has high 20, 24 or 27 inch push handrims on side allowing child to push device while standing. Clear plastic tray available. Fits child from 1 1/2 to 4 feet....[More Information]

  13. TAYLOR MADE MOBILE STANDER --- DISCONTINUED. (Verified 10/2002) RETAINED IN DATABASE FOR REFERENCE --- The Taylor Made Mobile Stander is an adjustable mobile standing aid designed to position children with mobility disabilities in an upright stance. Composed of lightweight aluminum alloy and unbreakable clear plastic, this therapeutic standing aid features adjustable body joint supports, a tray to place items on and attendant brakes. It is also designed to vertically incline up to 15 degrees and includes contured, washabl...[More Information]

  14. THERATREK --- DISCONTINUED. (Verified 4/2011) RETAINED IN DATABASE FOR REFERENCE. --- The TheraTrek is a gait trainer designed for use by individuals with mobility disabilities. The unit can also be used as a mobile standing aid, enabling users to use their hands in other tasks while receiving stable support. The lightweight unit features a four-wheeled U-shaped folding aluminum base and pelvic support. Indexed settings and simple controls allow rapid adjustment to pre-recorded settings. Directional caste...[More Information]

  15. VERTRAN Picture of VERTRAN --- DISCONTINUED. (Verified 2/2012) RETAINED IN DATABASE FOR REFERENCE. --- VERTRAN is a power standing mobility aid designed for use by individuals with spinal cord injuries, severe physical disabilities, and lower extremity disabilities. It provides secure mobility in any position from seated to fully standing. Front wheel drive and user positioning between the front wheels provide maximum stabilty. Features include an adjustable padded knee brace, adjustable seat height and depth, adjustable ...[More Information]

  16. ZIPPIE 3 -- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. -- Pediatric mobility system with 2 quick release drive wheels with 20, 22, 24 or 26 inch spoked wheels and 5 1/2 inch front casters. Will accommodate child with maximum weight of 100 pounds and maximum height of 60 inches. Available in the following configurations: BAC 3000 TS has seating frame with adjustable tilt in space; BAC 3000 TS/SP has both seating frame and standing frame with adjustable tilt in space. Tilt adjusts manually through 3...[More Information]

Page 1 of 1

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.