Products are listed alphabetically.

Page 1 of 3    Next page »

1. ACCESS4U MINI WHEELCHAIR RAMPS Access4U Mini Wheelchair Ramps are designed for use to make steps or other rises wheelchair accessible. These lightweight ramps can be used semi-permanently on one to two steps. They have a welded aluminum frame with an aluminum skid-resistant deck. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are available. CAPACITY: 600 pounds....[More Information]
   
   
2. ACCESS4U PORTABLE FOLDING RAMP The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds....[More Information]
   
   
3. ALUMILITE FOLDING CURB RAMP The Alumilite Folding Curb Ramp is a portable ramp designed to provide access over curbs or steps or in and out of vans for wheelchair users. The ramp folds in half for carrying and comes with a handle and closing strap. The ramp is made of welded aluminum with a permanent non-skid surface that is integral to the aluminum and cannot tear or wear off. DIMENSIONS (LxW): 3, 4, 5, or 6 feet x 29 or 36 inches (open) and 15 or 18 inches (closed). WEIGHT: 18 to 41 pounds depending on size. CAPACITY: 60...[More Information]
   
   
4. ALUMINIUM THRESHOLD RAMP The Aluminum Threshold Ramp is a threshold ramp designed for use by individuals who use wheelchairs or scooters. The ramp is manufactured of anodized aluminum and trimmed at the edges with a coarse finish strip to prevent the risk of slippage. The treads are slotted to facilitate drainage and stop the build up of ice. It is also transportable in the back of a car. DIMENSIONS: 2 or 3 feet long....[More Information]
   
   
5. ALUMINUM MODULAR RAMP The Aluminum Modular Ramp is a portable modular ramp designed for use by individuals with mobility disabilities. This all-aluminum ramp system provides wheelchair access to homes or businesses. The system can be assembled with little or no site preparation, and the modular components can be reconfigured or disassembled and moved to a new location. Components include straight ramps, 45 degree turns, 90 degree turns, and 180 degree switchbacks . DIMENSIONS: The ramps are 36 inches wide. All modul...[More Information]
   
   
6. ALUMINUM PORTABLE WHEELCHAIR RAMP The Aluminum Portable Wheelchair Ramp is a folding aluminum ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp has a non-slip, raised button surface for traction and safety. It folds in the center and has a handle for carrying. OPTIONS: Wheel kit for rolling transport and removable hinge pins allowing the ramp to separate into two sections. DIMENSIONS: Ramps are available in 5, 6, 7, 8, 10, or 12 feet lengths. All ramps are 30 inches wide. Custom dime...[More Information]
   
   
7. AQUA RAMP The Aqua Ramp is a portable swimming pool ramp designed to provide swimming pool access for wheelchair users and others who have difficulty using a ladder or steps. This lightweight aluminum ramp has non-skid surfaces, and it is wide enough for most aquatic wheelchairs. It automatically adjusts with movable floor systems. The ramp includes a lower platform. DIMENSIONS (LxW): 12 x 3 feet; lower platform is 3 feet long. WEIGHT: 250 pounds. WARRANTY: 5 year structural warranty....[More Information]
   
   
8. BARIATRIC MULTIFOLD PORTABLE RAMP (MODELS BAR536, BAR636, BAR736, & BAR836) The Bariatric Multi-Fold Portable Ramp is a bariatric portable ramp designed to provide access for wheelchairs and scooters. This welded aluminum ramp separates into two pieces for carrying. The two ramp panels fold in half and are locked together with a closure strap, then carried like a suitcase. The ramp has an anti-slip surface for traction during use and a center joint hinge for strength. The ramp comes with a visual aid to determine if it is on a safe slope. DIMENSIONS (LxW): 5 x 3 feet (m...[More Information]
   
   
9. BUTT RAMP The Butt Ramp is a portable threshold ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over thresholds or to get on or off of a curb. This straight aluminum ramp has a low rise and is available with wheel guards on both sides or on the left or right side only. The high end of the ramp butts up against the wall under the threshold, and it is raised by legs. The lower end ...[More Information]
   
   
10. CARLITE SERIES RAMP The Carlite Series Ramp is a portable ramp designed to provide wheelchair access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from aluminum, the ramp has an anti-slip tread with safety curbs on the sides. DIMENSIONS: Standard lengths are 1 to 6 feet and standard widths are 30 to 36 inches. Custom sizes are available....[More Information]
    
    
11. CURB RAMP The Curb Ramp is a portable ramp designed for use by people who have lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. It is intended to help a person to get over curbs or uneven thresholds. Made from aluminum, the ramp is available with wheel guards on both sides, or with no wheel guards, allowing it to be used at a threshold where a door swings out. It has transition plates on both ends for a smooth entrance onto or exit off of the ramp. DIMENSIONS...[More Information]
    
    
12. DECPAC MULTIPURPOSE RAMP (MODEL MP44) The Decpac Multipurpose Ramp, model MP44, is a portable ramp designed for use to provide access to vans or steps for individuals with mobility or lower extremity disabilities or spinal cord injury. This four-panel folding ramp can be used for a rise up to 13 inches over steps at home or to enter the side of a minivan. When folded it can fit into a van and slide under a seat. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked ...[More Information]
    
    
13. DECPAC MULTIPURPOSE RAMP (MODEL MP55) The Decpac Multipurpose Ramp, model MP55, is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used as a temporary wheelchair ramp in a rented home or in a building that does not have homes, such as one that has historical significance. The ramp can accommodate a rise of up to 16 inches. It is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. Th...[More Information]
    
    
14. DECPAC MULTIPURPOSE RAMP (MODEL MP66) The Decpac Multipurpose Ramp, model MP66,is a portable ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It can be used for a rise of up to 20 inches. It has four laminated fiberglass panels that are secured with a hook and loop strap when folded. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the ...[More Information]
    
    
15. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB44 ) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB44, is a ramp designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. It is a four-panel folding ramp with side barriers to help keep a wheelchair, scooter or stroller on the ramp. This ramp can be used for entryways with steps or to enter or exit a minivan on the side. The ramp can be used for a rise up to 13 inches. When folded the ramp can fit in a van and slide under a seat. The ramp is mad...[More Information]
    
    
16. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB55) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB55, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This collapsible four panel ramp can fit a rise of up to 16 inches. It fits in the side of a minivan, but when folded is compact enough to store under the seat of the van. Constructed from laminated fiberglass. its top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge ...[More Information]
    
    
17. DECPAC MULTIPURPOSE RAMP WITH EDGE BARRIER (MODEL MPEB66) The Decpac Multipurpose Ramp with Edge Barrier, model MPEB66, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can accommodate a rise of up to 20 inches, and it can be used for van access. Constructed from laminated fiberglass, its top surface has a textured non-slip tread and the edges are marked with a red caution stripe. Edge barriers are included for safety. The top edge is indicated with a label and it has a th...[More Information]
    
    
18. DECPAC PERSONAL MINI RAMP (MODEL MP24) The Decpac Personal Mini Ramp, model MP24, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. The ramp is small enough to carry in a bag on a wheelchair and can be stored in a vehicle or at home. The ramp is made from laminated fiberglass. The top surface has a textured non-slip tread and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, grooved rubber pad to hold at the edge of the step. The rubber g...[More Information]
    
    
19. DECPAC PERSONAL STANDARD RAMP (MODEL MP210) The Decpac Personal Standard Ramp, model MP210, is a portable curb or threshold ramp designed for use by individuals with mobility disabilities. This ramp can be used to navigate over curbs or thresholds with a rise of up to 9 inches, and it is small enough to be carried in a bag on a wheelchair. The ramp is constructed from laminated fiberglass. The top surface has a textured non-slip tread, and the edges are marked with a caution stripe. The top edge is indicated with a label and has a thick, ...[More Information]
    
    
20. EZ-ACCESS ROLLUP RAMP The EZ-Access Rollup Ramp is a portable ramp designed for persons with physical disabilities who use wheelchairs and scooters. Designed to bridge gaps over one step or a curb, the ramp features a durable, non-skid driving surface. The detachable side rails add support and act as a guide for maximum safety. Made of rust-resistant lightweight aluminum, the ramp rolls up for storage in the included nylon bag. DIMENSIONS (LxW): 36 x 30 inches. When rolled for storage, the ramp has a diameter to 6 in...[More Information]
    
    
21. EZ-ACCESS RUBBER THRESHOLD RAMP (MODELS THR 250-1 & THR RISER 225-1 PR) The EZ-ACCESS Rubber Threshold Ramp is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled tires. This ramp can be trimmed for lower heights. For thresholds higher than 2.5 inches, risers (model THR RISER 225-1 PR) are available that can be placed under the ramp. DIMENSIONS (HxLxW): 2.5 x...[More Information]
    
    
22. EZ-ACCESS RUBBER THRESHOLD RAMP WITH BEVELED SIDES (MODELS THRW36 150-1) The EZ-ACCESS Rubber Threshold Ramp with Beveled Sides, model THRW36 150-1, is designed for use by persons with mobility disabilities or spinal cord injury who use wheelchairs or scooters. The ramp provides smooth riding over doorway thresholds. Designed for most standard and sliding-door entrances, the ramp is made of rubber from recycled materials. The ramp can be trimmed for lower heights. DIMENSIONS (HxLxW): 1.5 x 24 x 36 inches (usable surface). The overall width including the beveled sides...[More Information]
    
    
23. EZ-ACCESS SUITCASE ADVANTAGE SERIES RAMP (MODELS AS2, AS3, AS4, AS5 & AS6) The EZ-ACCESS SUITCASE Advantage Series Ramp are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface with reflective stripes on each side of the surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to enter some minivans (models AS5 and AS6) and sport utility vehicles (AS...[More Information]
    
    
24. EZ-ACCESS SUITCASE RAMP (MODELS 2, 3, 4, 5 & 6) The EZ-ACCESS SUITCASE Ramp is a portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. Th1s ramp is made of aluminum and features an non-skid driving surface. The ramp is designed for use over curbs and steps and to enter some minivans (models 5 and 6) and sport utility vehicles (model 6 only). Each ramp has a fold-in-half design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): 24 x 29 inches (model 2); 36 x 29 inches ...[More Information]
    
    
25. EZ-ACCESS SUITCASE SIGNATURE SERIES RAMP (MODELS SS2, SS3, SS4, SS5, SS6, SS7 & SS8) The EZ-ACCESS SUITCASE Signature Series Ramps are portable single-track wheelchair and scooter ramps designed for use by people with mobility disabilities. These ramps are made of welded aircraft-grade aluminum and feature an applied skid-resistant surface. Each ramp has a self-adjusting bottom transition plate. These ramps are recommended for use over curbs and steps and to with some minivans, vans and sport utility vehicles. Each ramp divides into two halves by removing two hinge pins, and whe...[More Information]
    
    

Page 1 of 3    Next page »