Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Lamp Module

Products are listed alphabetically.

Page 1 of 1

  1. HOME AUTOMATION MODULES Picture of HOME AUTOMATION MODULES The Home Automation Modules are environmental control switch modules or lamp modules designed for individuals with speech or communication disabilities and severe neurological or physical disabilities. Intended for use with ComLink communicators (see separate entries) with integrated environmental control software. These modules communicate with the ComLink to control items in the user's home. For example, appliance modules can be used to turn on or off fans or other appliances. Lamp modules con...[More Information]

  2. LAMP MODULE (MODEL MED 2011) A 1 3/4 by 2 3/4 by 2 inch module with a 2 prong plug which plugs into a 110 volt AC receptacle. Provides on, off switching plus dimming of any 2 prong incandescent lamp of up to 500 watts which is plugged into module, in response to signals transmitted from a MED Microdec system or a BSR command console over in wall electrical power lines....[More Information]

  3. LARGE IN-LINE SWITCH Picture of LARGE IN-LINE SWITCH ---DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to oprate a lamp. A small stained and varnished wooden box was built to contain two electrical boxes. One electrical box is for a large rocker switch and the other box is for a regular 120- volt receptacle. It is connected to a three-wire supply cable complete with plug, recycled from an old refrigerator. The wiring is arranged so that the rocker switch controls the power to the receptacle. The wooden ...[More Information]

  4. REMOTE CONTROL OUTLET (SET OF 3) Picture of REMOTE CONTROL OUTLET (SET OF 3) The Remote Control Outlet (Set of 3) is a lighting control system designed for use by individuals with mobility or fine motor disabilities. This system is useful for operating small electrical appliances such as lamps, etc. for instant light at night, or where the electric plug socket is located in a difficult to reach place. It works on virtually any electrical device that can be plugged into a standard outlet. This set includes three plug-in receivers and two hand-held remote controls. With a...[More Information]

  5. SUPERREMOTE HOME AUTOMATION KIT Picture of SUPERREMOTE HOME AUTOMATION KIT The SuperRemote Home Automation Kit is a cordless remote control switch system for lights, television, VCR, and other appliances, designed for use by individuals with mobility disabilities. This three-piece home automation kit can control lights and appliances through an X10 remote control. The kit includes one Universal UltimateREMOTE (model UR19A), one Transceiver Module (model TM751), one Lamp Module (model LM465), and an instruction manual....[More Information]

  6. X10 2-WAY APPLIANCE MODULE (MODEL AM14A) Picture of X10 2-WAY APPLIANCE MODULE (MODEL AM14A) The X10 2-Way Appliance Module, model AM14A, is an environmental control interface module designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This module allows remote control of appliances such as fans, air-conditioners, dehumidifiers, coffee pots, stereos, and TVs, and enables the user to determine automatically which X10-controlled appliances are turned on and which are turned off. The module is designed for use with X10-compatible computer int...[More Information]

  7. X10 LAMP MODULE (MODEL LM465) Picture of X10 LAMP MODULE (MODEL LM465) The X10 Lamp Module, model LM465, is a lamp module designed to control incandescent lamps by a switch for individuals with physical disabilities. This lamp module responds to X-10 (sold separately) command signals which originate for environmental control units and other rmote controls. It plugs into an AC outlet and allows the user to dim and brighten lights....[More Information]

  8. X10 WALL SWITCH MODULE (MODEL WS467) Picture of X10 WALL SWITCH MODULE (MODEL WS467) The X10 Wall Switch Module, model WS467, is a lamp module designed to control indoor and outdoor lights through switches or environmental controls for individuals with physical disabilities. The module responds to X10 (sold separately) command signals which originate from environmental controls and other remote controls. This module replaces existing wall switch and installs like a regular dimmer. It can be dimmed and brightened....[More Information]

Page 1 of 1

View discontinued Products (1)

AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
by ICF Macro under Contract No. ED-04-CO-0018/0007.

The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.