Products are listed alphabetically.

Page 1 of 2    Next page »

1. 4-WAY OPENER The 4-Way Opener is a jar, bottle, ring top, and twist cap opener designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. One end has an slot in which ring tabs fit for easier opening and a bottle opener; the opposite side has a ridged circle to grip and unscrew bottle tops. On the underside, there is a hook that that will pop off a jar lid. The 4 Way Opener is dishwasher safe. DIMENSIONS: 5.25 inches long....[More Information]
   
   
2. 5-WAY OPENER The 5-Way Opener is a can and bottle opener designed for use by individuals with arthritis or fine motor, grasping, or upper extremity disabilities or weakness. This ergonomically designed opener features teeth, pincers and levers to assist with opening bottles with metal bottle caps, cans with pop tops, machine-sealed plastic bottles, and cans with pull tabs. Its rubber handle insert offers a secure grip that helps reduce slipping. The device can also be used to break the vacuum seal on hard to...[More Information]
   
   
3. 6 IN 1 MULTI OPENER The 6 in 1 Multi Opener is a bottle, ring top, and jar opener designed for use by individuals with fine motor, grasping, or upper extremity disabilities. Shaped like a figure eight with a stainless steel and polycarbonate frame, this device opens bottle caps, pull tabs, safety seals, bottle tops, jar lids, and slice open bags. The unit has a Santoprene grip material cover and a clamp-style design. It is dishwasher safe. COLORS: black, blue, green, red. DIMENSIONS (LxWxD): 5.5 x 2.5 x 1 inches. ...[More Information]
   
   
4. CAREX ENABLERS JAR OPENER & CLOSER (MODEL EN17CRD) The Carex Enablers Jar Opener & Closer, model EN17CRD, is a jar opener and tap turner designed for use by individuals with limited manual dexterity. The large round disk fits over jar lids or taps, while the pinwheel design in the surface helps secure the user's grip and concentrate hand strength while turning. DIMENSIONS (HxDxW): 4.75 x 1.25 x 4.75 inches....[More Information]
   
   
5. DYCEM JAR OPENER & MAT SET The Dycem Jar Opener & Mat Set is a jar opener and non-slip pad designed for use by individuals with upper extremity disabilities. The set includes a bowl-shaped, non-slip jar opener for opening screw top jars and a round, non-slip mat to stabilize the jar during opening. DIMENSIONS: The round mat is 5.5 inches in diameter. COLOR: The jar opener is available in blue or yellow....[More Information]
   
   
6. DYCEM JAR OPENER (MODEL 16K027A) The Dycem Jar Opener, model 16K027A, is a jar opener designed for use by individuals with upper extremity disabilities, arthritis, or grasping disabilities. The device is a hollow cone lined with Dycem, which exerts a strong grip on most surfaces. The user places it over the top of the jar and turns. The device can be used to open jars with lids from 1 to 4 inches in diameter. COLOR: Blue....[More Information]
   
   
7. EASITWIST JAR OPENER The EasiTwist Jar Opener is a jar opener designed for use by individuals with fine motor, grasping, or upper extremity disabilities or arthritis. This plastic device tightly grips jar lids and holds on until the lid is off. The ridged grip handle grips lids from sticky steak sauce caps to pickle jar lids. DIMENSIONS (LxWxH): 9 x 3 x 0.875 inches. The unit grips lids up to 3 inches in diameter....[More Information]
   
   
8. GOOD GRIPS JAR OPENER The Good Grips Jar Opener is designed for use by people with limited grasping ability. The built-up handle is made of rubber-like material that bends to conform to the user's grasp and is non-slip even when wet. The dishwasher-safe device grips lids up to four inches in diameter in the vortex of a V and with a turn of the wrist opens them. DIMENSIONS: 9 x 5 x 1 inches. COLOR: Black....[More Information]
   
   
9. GRIPPER JAR OPENER The Gripper Jar Opener is a jar opener designed for use by individuals with arthritis or upper extremity disabilities. The device works on smooth and grooved jar lids and the jaws securely tighten around the lid and remain locked until the user releases them. DIMENSIONS: Opens lids 1 to 3.75 inches wide; the unit is 9.5 inches wide. ...[More Information]
   
   
10. Gripper. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to open and close screw-top jars or to use to turn taps and valves for someone with weak hands. Provides pattern and instructions for a gripper made of plywood with rubber glued to the surfaces that come into contact with the object to be turned. Can be clamped or screwed down for one-handed use. Includes drawings and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Grainger, S E TITLE: Making Aids for Disabled Living REF: North Pomfret, Ve...[More Information]
    
    
11. HANDY AID GRIPPER (MODEL F75358) The Handy Aid Gripper, model F75358, is a jar opener made of flexible rubber. This disk with non-slip texturing on both sides allows for a firm grip on jar lids, salt shakers, fuses, radiator caps, etc. The device also offers protection from sharp edges and provides a grip on tool handles, and can be used as a non-slip pad under vases or bowls. DIMENSIONS: 4 7/8 inches in diameter....[More Information]
    
    
12. HOT HAND HAND PROTECTOR The Hot Hand Hand Protector is a heat protection device and jar opener designed for maintaining a secure grip on hot or cold slippery items such as glasses, pans, cups and to aid in opening jars with screw tops. The protector is made of flexible silicone, and this pad has end pockets to fit the thumb and fingers. The gripping surfaces are studded with numerous small suction cups. The device will retain its flexibility over a temperature range from -70 degrees to 500 degrees Fahrenheit. Hole tabs...[More Information]
    
    
13. JAR & BOTTLE & CORK OPENER (MODEL HA-4282) The Jar & Bottle & Cork Opener, model HA-4282, is a screw top jar and bottle opener and cork remover designed for use by individuals with grasping, fine motor disabilities, or arthritis. This wrench-style plastic opener has an ergonomic handle enabling the user to turn and remove caps, lids, and corks. This opener is dishwasher safe....[More Information]
    
    
14. JAR & BOTTLE HOLDER (MODEL HA-4290) The Jar & Bottle Holder, HA-4290, is a jar and bottle holder and opener designed for use by individuals with use of one hand, arthritis, or upper extremity disabilities. This device sits over the edge of a counter and the jar or bottle is placed in its V section. The sliding section is then pushed in with the hip or stomach, leaving the hand(s) free to remove the lid....[More Information]
    
    
15. JAR OPENER (MODELS Z-3 & Z-4) Jar opener. Opens anything that wears a cap: screw, pry-up, friction, vacuum or crown. Attaches to wall and has friction hinge so opener can be folded out of the way when not in use. All steel construction, heat treated jaws. White enamel (Z-3) or chrome plated (Z-4)....[More Information]
    
    
16. JAR OPENER AND CLOSER (MODEL Z-5) Jar opener and closer. All steel construction, steel serrated jaws, nickel plated. Lower jaw opens jars, upper jaw closes jars, may be used with wide range of jar lid sizes. Three mounting screws. May be mounted behind kitchen cabinet lip and concealed from view....[More Information]
    
    
17. JAR POP JAR KEY The Jar Pop Jar Key is a jar opener designed to assist people with limited gripping ability or hand strength in opening jars with smooth lids. The plastic device is placed against the lid much like a bottle opener and with minimal pressure, the lever pops the jar seal, allowing the lid to turn freely. The device features a wide handle. DIMENSIONS: 5.25 inches long. COLOR: Assorted....[More Information]
    
    
18. Jar Opener. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Jar opening device to help open bottle lids for a person whose ability to grip objects is limited. Describes device made of a piece of 1 inch wood about 6 inches square with an arch-shaped section cut out. This indentation is lined with 1 inch wide textured rubber (i.e. innner tube rubber slashed to give traction), or and old hacksaw blade and emery paper on either side of the indentation. Device is mounted on a shelf. COMMENTS: Suggests, as an alt...[More Information]
    
    
19. KUHN RIKON EASY LIDLIFTER Kuhn Rikon Easy LidLifter is a jar opener designed for use by individuals with arthritis or fine motor, grasping, or upper extremity disabilities or weakness. The unit has a omfortable non-slip grip and provides leverage. To use, a lid is placed in one of three openings that is lightly larger than lid. Squeeze gently and twist counter-clockwise to open. The Easy LidLifter opens smooth and ridged lids from 0.75 inch to 2 inches. DIMENSIONS: 9.5 x 4 x 1 inches. COLOR: Green, blue, red and white, o...[More Information]
    
    
20. KUHN RIKON GRIPPER JAR OPENER, THE The Kuhn Rikon Gripper Jar Opener is a jar opener designed for use by individuals with arthritis or fine motor, grasping, or upper extremity disabilities or weakness. This device is engineered so that it tightens the jaws around the cap, even as the jar is being opened, elimunating slipping. To use, place The Gripper over the jar lid and rotate the turn knob clockwise to tighten jaws onto lid to lock the tool in place. While holding the jar or bottle securely, the user grasps the handle and push...[More Information]
    
    
21. LIDS OFF DELUX JAR OPENER (MODEL JW250) The Lids Off Delux Jar Opener, model JW250 is a powered jar opener designed for use by individuals with upper extremity or grasping disabilities, arthritis, or the use of only one hand. To open a jar, the jar is placed on the turntable of the unit and the upper body of the unit is lowered to fit securely on the lid. Pressing the handle down causes the turntable to rotate, loosening the jar lid. The unit handles jars up to 8 inches high and up to 4.5 inches in diameter. Features include adjustabl...[More Information]
    
    
22. LIDS OFF JAR OPENER (MODEL JW 200) The Lids Off Jar Opener, model JW 200, is a powered jar opener designed for use by individuals with grasping or upper extremity disabilities, arthritis or the use of only one hand. To open a jar, the jar is placed on the turntable of the unit and the upper body of the unit is lowered to fit securely on the lid. Holding the on/off button down cause the turntable to rotate, loosening the jar lid. The unit handles jars in a variety of shapes, sizes, and styles, including baby food jars, large jars,...[More Information]
    
    
23. MADDAGRIP OPENER The Maddagrip Opener is a jar opener designed for use by individuals with limited grasping ability. This soft, large-diameter opener fits the entire hand for extra turning power. This device conforms to most lids, from small vials and bottles to large jars, and enables lids to be removed by exerting pressure with the palm and twisting....[More Information]
    
    
24. MODIFIED TAD JAR OPENER ---- CUSTOM ADAPTATION ---- PURPOSE: To enable an individual with upper extremity disabilities to open screwtop jars. A standard TAD belly clamp was modified to fit rounded counter edges and made deeper at the front. A Baby Boa Constrictor Opener, which has a self-clamping rubber strap to grasp the lid completed the unit. The user stands in front of the belly clamp, holding it in place with his/her body. The jar is placed in the triangular point of the unit. With the jar secure, the strap is pla...[More Information]
    
    
25. MOUNTED JAR OPENER (MODEL F75346) The Mounted Jar Opener, model F75346, is designed to provide a convenient way to open any screw-type jar lid from 3/8 to 3 3/8 inches in diameter with one hand. The devices may be mounted to the underside fo any shelf or cabinet. The device is made of glass-filled nylon with a knurled hardened steel gripper, needs no adjustment, and has no moving parts. DIMENSIONS: 6 x 3.5 x 5/8 inches....[More Information]
    
    

Page 1 of 2    Next page »