Products are listed alphabetically.

Page 1 of 1

1. DYNAFOAM ELBOW EXTENSION TUBES (MODELS 1129 TO 1131) The Dynafoam Elbow Extension Tubes are elbow extension orthoses, or flexion contracture splints, made of open-cell Dynafoam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from the shoulder to the wrist to promote elbow extension. Each splint has 3 Velcro cinch strap closures to secure it to the arm. The tubes may be washed or autoclaved, and the foam may be adapted with a razor blade or scissors. An optional tapered polyethyl...[More Information]
   
   
2. DYNAFOAM KNEE EXTENSION TUBES (MODELS 1132 TO 1135) The Dynafoam Knee Extension Tubes ##1132 - ##1135 are leg positioners and flexion contracture splints made of lightweight open-cell foam. The tubular design utilizes the dynamic properties of the foam to extend gradually, yet effectively. These tubes fit from midthigh to ankle to promote knee extension. Each splint has 3 Velcro cinch strap closures to secure it to the limb. The tubes may be washed or autoclaved, and the foam can be adapted with a razor blade or scissors. An optional tapered poly...[More Information]
   
   
3. DYNASPLINT LPS UNIT The DynaSplint LPS Unit is an extension or flexion contracture splint designed to allow joint movement during use. The brace uses low intensity force over a prolonged period of time to relieve shortened connective tissue of elbows, knees, wrists, ankles, and hips. The unit consists of stainless steel rods containing steel compression springs with hinged joints, and 2 cuffs with velcro closures attached to the top and bottom of the rods. The splint will fit on either right or left extremities....[More Information]
   
   
4. DYNASPLINT PEDIATRIC UNITS The DynaSplint Pediatric Units are extension or flexion contracture splints designed to increase joint motion and reduct contracture of the knee, elbow, wrist, or ankle. The brace consists of stainless steel with a velcro-adjustable front and back cuffs. Spring tension force is adjustable from 0 to 1.66 foot pounds (4 pounds of force at the distal end of the unit). Force is controllable with a screw adjustment inside the distal ends of the lower leg or forearm struts. SIZE: The unit will fits ar...[More Information]
   
   
5. ORTHOCARE MODULAR DYNAMIC ELBOW EXTENDER The Orthocare Modular Dynamic Elbow Extender is an elbow extension orthosis or flexion contracture orthosis. This 3-point pressure system consists of a bicep cuff, forearm cuff, elbow pad, and aluminum side bars. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores, and swivel to distribute pressure evenly. The cuffs are attached to aluminum side bars by leather straps. The elbow pad is leather with stainless steel buckles. The elbow strap is adjustable for...[More Information]
   
   
6. ORTHOCARE MODULAR DYNAMIC KNEE EXTENDER The Orthocare Modular Dynamic Knee Extender is a knee extension orthosis and flexion contracture splint with a 3-point pressure system consisting of 2 posterior cuffs, one behind the thigh and one behind the calf, connected by adjustable length aluminum side bars and connected to a knee pad by leather straps. The cuffs are made of ABS plastic and are flanged and padded to help prevent pressure sores and swivel to distribute pressure evenly. The aluminum side bars are pre-drilled for length adjus...[More Information]
   
   
7. SLEEVE FOR DYNAFOAM ELBOW/KNEE EXTENSION TUBES (MODELS 1136 TO 1142) The Sleeve for Dynafoam Elbow Extension Tube is an optional cover for the elbow and knee extension tubes (see separate entry) and is designed to aid in maintaining full extension. This flat sheet is made of polyethylene and slips under the cinch straps on the extension tube. The sleeve wipes clean. DIMENSIONS: Sleeve is 13/64 inches thick. SIZES: Small (##1136, ##1139), Medium (##1137, ##1140), and Large (##1138, ##1141) for knee or elbow extension tubes, or Extra Large (##1142) for knee extensi...[More Information]
   
   
8. URIAS PRESSURE SPLINTS (MODEL 3821 SERIES & MODEL 3823L) Urias Pressure Splints, model 3821 Series, and model 3823L, are inflatable hand and ankle foot orthoses and wrist and forearm splints designed for therapy and proper limb positioning for use by adults with upper or lower extremity disabilities, neurological disabilities, or cerebral palsy. Designed to inhibit spasticity, assist movement patterns, expedite weight bearing and reduce edema, each splint consists of a double layer of washable PVC sheeting and features a plastic zipper closure for eas...[More Information]
   
   

Page 1 of 1