Products are listed alphabetically.

Page 1 of 4    Next page »

1. ACOR CUSTOM HAND ORTHOSIS Acor Custom Hand Orthosis is a wrist and forearm splint made of leather. Closure options include velcro straps, eyelets, hooks, or laces. This splint is available with steel or plastic reinforcement stays for added support, and can be manufactured extra rigid for maximum support or very soft for moderate support. COLORS: Brown or buff....[More Information]
   
   
2. ARTHROSCOPIC TRACTION ASSIST The Arthroscopic Traction Assist is a hand splint designed to hang from a traction device to provide proper positioning of the shoulder during arthroscopic surgery and as an assistive suspension device for upper extremity fracture reduction. The orthosis is comprised of a foam lined, hypoallergenic, linear polyethylene plastic with a padded dorsal tongue that enables it to provide rigid cast-like protection. It is customizable using a heat gun and scissors. One presewn double layer cotton stocki...[More Information]
   
   
3. CARPAL GEL PAD The Carpal Gel Pad is a hand orthosis designed for use by individuals with carpal tunnel syndrome. This contoured polymer gel pad is designed to reduce scarring and hypersensitivity at the incision site following carpal tunnel surgery. Filled with mineral oil, the pad has adhesive on the back that allows it to be attached to the inside of Wrist Lacers, V Straps, Motion Managers, Freehand Wrists, Compressor Wrist, and Ryno Lacers. ...[More Information]
   
   
4. CHATTA-GRIP The CHATTA-Grip is a hand orthosis designed to prevent contractures due to immobility. This soft splint features a variety of palmar additions to address different degrees of finger flexion and extension. Available for the right or left hand, this washable splint is malleable to accommodate different degrees of wrist flexion/extension. A laundry bag and an extra cover are included. SIZES: Small, medium, and large....[More Information]
   
   
5. CHATTA-REST The CHATTA-Rest is a hand orthosis designed to prevent contractures due to immobility. This soft splint is a resting hand splint which inhibits flexion of the wrist and fingers . Available for the right or left hand, this washable splint is malleable to provide a custom fit. A laundry bag and an extra cover are included. SIZES: Small, medium, and large....[More Information]
   
   
6. COCK-UP WRIST SPLINT The Cock-Up Wrist Splint is a hand and wrist support for individuals with a variety of conditions resulting from injury or illness. The splint is designed to provide wrist support for dynamic splinting, and to be useful for post-fracture support, tendinitis, carpal tunnel syndrome, and sprains or strains. It may also be used in cases of general wrist weakness, to correct deformity, or for peripheral nerve injuries. The Cock-Up Splint is made of 1/8-inch neoprene and features a sewn-in positioner...[More Information]
   
   
7. DYNAFOAM ARTHRITIC W.H.O. (MODELS 1065 THRU 1070) The Dynafoam Arthritic W.H.O. (wrist/hand orthosis) is a night splint designed to position the wrist and fingers in normal anatomical alignment and to discourage ulnar drift of the wrist and fingers. The brace is made of Dynafoam, a foam material that provides high resiliency and innate dynamic forces when compressed or stretched. The orthosis has a Velcro fastener system to secure it to the area. SIZES: Available for left or right hand models; Small (##1065, ##1066), Medium (##1067, ##1068), an...[More Information]
   
   
8. DYNAFOAM FUNCTIONAL HAND POSITIONER (MODELS 1106 & 1107) The Dynafoam Functional Hand Positioner ##1106/##1107 is a hand orthosis designed to abduct and extend the fingers with the thumb in opposition. The splint is made of open-cell, breathable Dynafoam. The user inserts the fingers and thumb into the foam, and the splint is secured with a strap which wraps around the wrist "figure 8" style and fastens with Velcro closures. SIZES: All models fit either the left or right hand; Small (##1106) or Large (##1107)....[More Information]
   
   
9. ENGEN PLASTIC HAND ORTHOSIS (EPHO), RECIPROCAL WRIST EXTENSION, OPPONENS ORTHOSIS WITH FOREARM SUPPORT, & OPPONENS ORTHOSIS These four modular systems for upper extremity orthotics are designed for a variety of positioning and functional applications. The Engen Plastic Hand Orthosis (EPHO) provides metacarpal arch support and stabilizes the thumb in a position of prehension while allowing passive finger motion. The unit may be heat reshaped for individual modifications. Non-reinforced modules are available for supportive applications, as are radially reinforced modules for adaptations requiring stable mechanical join...[More Information]
   
   
10. FREEDOM RESTING HAND MITT SPLINT (MODEL 57210) The Freedom Resting Hand Mitt Splint, model 57210, is a hand orthosis designed for use by individuals with upper extremity disabilities. Available for the right or left hand, this splint supports the arches of the hand and the thenar web space. It maintains the metacarpal phalangeal (MP) joint in approximately 80 degrees of flexion to protect future hand function. Made of featherweight AliLight material, this splint accommodates edema and can be customized with a heat gun. SIZES: Small, medium,...[More Information]
    
    
11. HAND SPLINT Hand splints. Vinyl coated aluminum, with or without foam padding. Variety of forearm and cock up wrist splints, and whole hand platform splints....[More Information]
    
    
12. HAND SPLINT 7 INCH (MODEL 08357) The Hand Splint, 7 Inch, model 08357, is a hand orthosis designed for individuals with upper extremity disabilities. This splint is made of elastic with aluminum spoon for added support and is available for the right or left hand. SIZE: Small, medium, large, and extra large. COLOR: White...[More Information]
    
    
13. HEMIPLEGIC HAND ORTHOSIS The Hemiplegic Hand Orthosis is a Kydex and aluminum hand orthosis designed to replace the hemiplegic platform splint. The Volar Kydex hand and thumb piece is adjustable with a heat gun; the dorsal aluminum arm frame is padded with Plastazote, and the wrist hinges can be locked at any angle and set with the rivet. The brace is secured with a Velcro closure. SIZES: In the kit, Small (for up to 3.25 inches across MP joints), and Large (over 3.25 inches across the MP joints); Assembled orthoses, or...[More Information]
    
    
14. LMB WIRE-FOAM RESTING HAND SPLINT The LMB Wire-Foam Resting Hand Splint is a hand orthosis designed for use with individuals with upper extremity disabilities. Made with high- quality Wire-Foam construction, this splint allows a customized fit and has a malleable frame for static progressive splinting. Removable criss-cross wrist straps help secure the wrist. This splint is available for the right or left hand. OPTIONS: Finger Deviation Strap. SIZES: Small, medium, or large....[More Information]
    
    
15. MERIT STATIC-PROGRESSIVE COMPONENT The MERiT Static-Progressive Component is a finger extension or flexion component designed for use by individuals with disabilities of the fingers. This metal component aids in gaining flexion or extension of the joints of the thumb, finger, wrist, or elbow. The unit provides direct controlled static tension for use in place of dynamic graded springs or rubber band splinting. Tension of pull can be adjusted by simply turning the thumb screw....[More Information]
    
    
16. MINI THUMB SUPPORT WITH MOVEABLE STABILIZER (MODEL 9015) The Mini Thumb Support with Moveable Stabilizer, model 9015, is a hand orthosis designed to provide warmth, compression, and stabilizing support for the thumb. The neoprene wrap-around brace fits any hand and the thumb area can be cut to the desired length. COLOR: Tan....[More Information]
    
    
17. MIT DYNAFOAM WRIST AND HAND ORTHOSIS (MODELS 1057 THRU 1064) The MIT Dynafoam Wrist and Hand Orthosis is designed to encourage and maintain normal extension of the wrist, fingers, and thumb joints. This contoured foam splint "sandwiches" the hand and provides an anatomical position of 10 degrees wrist dorsiflexion and normal finger and thumb extension and abduction. Dynafoam is a compression foam that provides volar and dorsal extension force to the hand and wrist, which decreases as flexed joints assume a normalized extended position. 2 Velcro cinch stra...[More Information]
    
    
18. MOBILE ARM SUPPORT (SERIES 7062) The Mobile Arm Support, series 7062, is a hand orthosis and elbow support designed for use by individuals with upper extremity disabilities who use wheelchairs. Available in models for the right or left arm, and in a choice of level or elevated support, the units rests on the wheelchair arm and includes straps to maintain proper arm positioning. Covered in spray-and-wipe clean nylon, the removable arm trough is constructed of high-density foam for comfort....[More Information]
    
    
19. N-ABLER III WRIST / HAND ORTHOTIC (W.H.O.) The N-Abler III Wrist/Hand Orthotic (W.H.O.) is a hand orthosis designed to enable individuals with upper extremity amputation or disability to utilize tools and utensils. Available in a soft model or a carbon fiber model, this device can be used with the N-Abler II (not included; see entry) by individuakls with prosthetics or by individuals without prosthetics. OPTIONS: Attachable cutlery, kitchen tools, eating utensils, gardening tools, sports equipment (hunting, fishing, golf, and weightlift...[More Information]
    
    
20. ORTHOCARE ANATOMICAL CONE HAND ORTHOSIS (MODELS 1108 THRU 1113) The Orthocare Anatomical Cone Hand Orthosis is a hand cone designed to provide supinated neutral positioning of hand, and to maintain slight finger flexion and metacarpal arch. The brace is made of lightweight plastic. 2 Velcro straps secure the orthosis to the hand. SIZES: Available for the left or right hand; Small (##1108, ##1109), Medium (##1110, ##1111), and Large (##1112, ##1113)....[More Information]
    
    
21. ORTHOCARE NEUTRAL POSITION WRIST HAND ORTHOSIS (MODELS 1115 THRU 1128) The Orthocare Neutral Position Wrist/Hand Orthosis is a spasticity- type splint with an anatomical cone design with premolded metacarpal arch that maintains slight flexion of all finger joints, and supported thumb in opposition. Due to the elimination of a radial border, the splint allows easy forearm pronation and supination. The recessed ulnar styloid area helps eliminate pressure. The brace is completely flanged and has rounded edges to insure against possible injury by the user. The custom o...[More Information]
    
    
22. ORTHOCARE POSITIONAL ORTHOSIS FOR HAND BURNS The Orthocare Positional Orthosis for Hand Burns is a functional hand splint designed to assist in preventing deformities of hands that have been burned. Made of Kydex plastic, this hand orthosis features 15 degrees of wrist dorsiflexion, thumb abduction and extension, approximately 60 degrees of flexion of metacarpophalangeal (MPC) joints, and full extension of interphalangeal (IP) joints. The Kydex plastic is easily adapted with a heat gun, and wipes clean with any aseptic solution. SIZES: Ava...[More Information]
    
    
23. ORTHOCARE WANCHIK NEUTRAL POSITION RESTING WRIST/HAND ORTHOSIS The Orthocare Wanchik Neutral Position Resting Wrist/Hand Orthosis is a functional hand position splint designed to maintain the triangular position of the metacarpal heads in a resting position. The brace is sculptured to fit the thenar and hypothenar eminences of the hand, and maintains the metacarpal arch in the proper curve and angle in relation to the wrist joint. This orthosis is made of Kydex plastic, which is adaptable with a heat gun. An integral, adjustable Velcro strap system secures...[More Information]
    
    
24. PHOENIX EXTENDED OUTRIGGER The Phoenix Extended Outrigger is a hand orthosis designed for use with individuals with radial nerve injuries or other disabilities of the hand. When mounted to a thermoplastic splint base (not included), this unit positions the wrist and the metacarpal phalangeal (MCP) joints in extension while allowing active functional hand use. The splint design ensures minimal coverage of the palmar surface of the hand, allowing increased sensation. The set includes a dorsal outrigger, four pre-tied finge...[More Information]
    
    
25. PHOENIX OUTRIGGER The Phoenix Outrigger is a hand orthosis designed for use with individuals with disabilities of the hand. This unit provides dynamic metacarpal phalangeal (MCP) extension with active flexion, allowing complete available range of motion. The outrigger bonds to any splint base (not included), and slotted pulleys can be aligned for a 90-degree angle of pull. The kit includes a curved dorsal extension outrigger, four slotted pulleys, radial outrigger, pre-tied finger slings, rubber band posts, and a...[More Information]
    
    

Page 1 of 4    Next page »