Products are listed alphabetically.

Page 1 of 3    Next page »

1. ADJUSTABLE COMPOSITE BATH & SHOWER SEAT The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPAC...[More Information]
   
   
2. ADJUSTABLE SHOWER SEAT WITH ARMS AND BACK The Adjustable Shower Seat with Arms and Back is designed for use by individuals with balance and lower extremity disabilities. The shower seat has removable back and arms and features height-adjustable legs, suction feet, and a built-in hand held shower spray holder. DIMENSIONS: The width between the arms is 17.5 inches and the legs adjust from 16 inches to 21 inches in 1- inch increments. CAPACITY: 300 pounds....[More Information]
   
   
3. ADJUSTABLE TRANSFER BENCH (MODEL 16B903A) The Adjustable Transfer Bench, model 16B903A, is a transfer bench designed for use by individuals with mobility disabilities or spinal cord injury. The bench features a built-in handheld shower holder and suction feet and it adapts easily for left- or right-hand tubs. DIMENSIONS (HxW): 16 to 21 x 30 inches. CAPACITY: 350 pounds....[More Information]
   
   
4. BARI 385 TRANSPORT COMMODE SHOWER CHAIR The Bari 385 Transport Commode Shower Chair is a bariatric commode shower chair designed for use by individuals with mobility disabilities. This chair has a powder coated stainless steel frame with drainage holes and a urethane foam commode seat with front opening. A bed pan and basket are included with the commode seat. The seat has up to 8 degrees of anterior tilt and 14 degrees of posterior tilt, with up to 65 degrees of back recline. The fixed-height armrests can be removed or rotated to adj...[More Information]
   
   
5. BARIATRIC BEDSIDE COMMODE / SHOWER CHAIR (PVCM130C10BCS) The Bariatric Bedside Commode/Shower Chair, model PVCM130C10BCS, is a shower chair and commode designed for use by individuals with mobility disabilities. The chair has a high-density polyethylene seat with a removeable seat cushion. There are non-slip rubber tips on the chair legs, and safety grips on the arms. DIMENSIONS (HxLxW): 43 x 28 x 34 inches overall and 30 inches wide between the armrests. CAPACITY: 700 pounds....[More Information]
   
   
6. BARIATRIC SHOWER CHAIR / COMMODE (MODELS PVCM1305 & PVCM1315) The Bariatric Shower Chair/Commode is a shower commode designed for use by bariatric individuals with mobility disabilities. This combination shower chair and commode has a dual reinforced frame, four stainless steel bolts in the seat, and threaded-stem casters. A 10-quart commode slides out when not in use. Other features include anti-slip handgrips and a push/pull handle. Model PVCM1315 has a slide-out footrest. DIMENSIONS: Seat is 30 inches wide between armrests. CAPACITY: 700 pounds....[More Information]
   
   
7. BARIATRIC SHOWER COMMODE CHAIR (MODEL 130-5) The Bariatric Shower Commode Chair, model 130-5, is a shower chair and commode with casters designed for use by individuals with balance or mobility disabilities. The frame is made of PVC plastic with a commode seat, armrests, and six threaded stem casters. DIMENSIONS (HxLxW): Frame is 43 x 28 x 34 inches. The seat is 21 x 23 x 30 inches. The casters are 5 inches in diameter x 1.25 inches wide. CAPACITY: 700 pounds. COLOR: Frame is white....[More Information]
   
   
8. BARIATRIC SHOWER/COMMODE CHAIR (MODEL 720) The Bariatric Shower/Commode Chair, model 720, is a shower chair designed for use by large individuals with lower extremity or mobility disabilities. FRAME (LxW): 42.5 (including footrest) x 26 1/8, 28 1/8, 30 1/8, or 32 1/8 inches. The chair has a stainless steel, rigid frame with push handles and anti-tippers. SEAT (LxW): 20 7/16 x 20, 22, 24, or 26 inches. A removable commode pan is included. CUSHION: Ensolite seamless seat and back cushions with full-width padded seat. ARMRESTS: Full-length,...[More Information]
   
   
9. BATH ONE SHOWER COMMODE CHAIR (MODEL 7200) The Bath One Shower Commode Chair, model 7200, is a commode chair designed for use by individuals with balance, mobility, or lower extremity disabilities. The unit features a molded plastic seat and back, aluminum legs, and bucket with lid. ASSEMBLY: Complete assembly includes snapping the back and legs in place. For carrying or storage, the legs and back can be clipped onto the anti-slip seat. OPTIONS: Attachable armrest and urine splash cup. DIMENSIONS (HxLxW): 20.5 x 18.5 x 4 inches. CAPACIT...[More Information]
   
   
10. BENEBATH SHOWER & BATH CHAIR The BeneBath Shower and Bath Chair is a bath seat and shower chair designed for use by individuals with mobility or balance disabilities. This lightweight chair has an anodized aluminum frame with a molded plastic seat and back. Features include contoured seat and back pads; separately height adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat and back. The chair back is positioned at a slight angle for comfort. The pa...[More Information]
    
    
11. COMFORT SEAT (MODELS 1738, 1739, & 1752) The Comfort Seat, models 1738, 1739, 1752, is a shower chair designed to assist those who are unable to stand in the shower. The seat comes with adjustable legs and is made of molded plastic with built-in handles and slide-proof rubber suction tips. OPTIONS: seat with matching back (1738); seat with adjustable legs, delivered assembled (1752); DIMENSIONS: W x D measured at leg tips 19 x 14 inches; Seat is 20 x 11 3/4 inches; height adjusts from 14 - 21 inches...[More Information]
    
    
12. COMFORT SHOWER CHAIR The Comfort Shower Chair is a shower stool designed for use by individuals with mobility disabilities. This chair has a tubular frame and armrests, a padded backrest, and a padded commode-style seat. DIMENSIONS: The seat is 14 inches wide and the base is 22.5 x 20 inches. CAPACITY: 335 pounds....[More Information]
    
    
13. COMPOSITE SHOWER STOOL & CHAIR The Composite Shower Stool & Chairs, Models K11115 & K11116, are shower seats for persons with physical disabilities who are unable to stand beneath a shower flow. The lightweight, plastic stool and chair is textured for secure seating. A backrest on the chair provides additional support. Both are designed to fit inside any standard size tub or shower. OPTIONS: Footpiece extensions can be ordered separately to adjust chair or seat height from 18.5 inches to 20.5 inches. DIMENSIONS: Seats measure...[More Information]
    
    
14. CUSTOM-DESIGNED SHOWER CHAIR ---- CUSTOM ADAPTATION ---- PURPOSE: To enable caregiver -assisted showering of an adult with severe multiple disabilities. This individual is unable to sit independently and cannot use a conventional shower chair due to scoliosis and hip positioning issues. The chair was built with the narrowest possible width to accommodate maneuvering in narrow areas of the home. This chair has a 22 millimeter zinc-dipped, powder-coated steel tube frame with triangular struts for added durability and stabilit...[More Information]
    
    
15. CUSTOMIZED SHOWER SEAT -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized shower chair for an individual with campomelic dwarfism and intellectual disabilities. This individual required a caregiver to bathe her but without getting water in her ears. Previous methods and adaptations were not useful as they required the assistance of another individual and/or they were hard on the care giver’s back. This customized adaptation is modified version the “Matilda” bath seat design which rests on a bath ...[More Information]
    
    
16. DELUXE BLOW-MOLDED BATH SEAT (MODELS 1710, 1714, & 1716) The Deluxe Blow-Molded Bath Seat, models 1710, 1714, 1716, is a shower chair designed to assist those who are unable to stand in the shower. The blow-molded, polyethylene seat has drainage holes in the back and seat and is easy to assemble. OPTIONS: adjustable legs (model 1714); back rest and adjustable legs (model 1716). DIMENSIONS: Seat is 19.75 x 11.5 inches; the height of the adjustable units is 14 to 21 inches....[More Information]
    
    
17. DELUXE SHOWER BENCH (MODELS S300 & S350) The Deluxe Shower Bench is a shower bench (Model S300) and shower chair (Model S350) designed for use by individuals who are unable to stand while showering. These height-adjustable benches feature anodized aluminum frames and molded plastic seats with drainage holes. Model S300 is backless and model S350 has a backrest. DIMENSIONS (WxDxH): 20 x 12 x (14 to 19) inches. The height adjusts in 1-inch increments. CAPACITY: 220 pounds. WEIGHT: Model S350 weighs 9 pounds and model S300 weighs 5.5 poun...[More Information]
    
    
18. EASY-CARE SHOWER CHAIR Shower chair. Molded back and seat with hand holds. Aluminum frame. Available with or without back. Adjustable seat height 13 to 20 inches. Seat depth 11 inches. Seat width 19 1/4 inches. Light gray....[More Information]
    
    
19. ECONOMY SHOWER BENCH (MODELS S200 & S250) The Economy Shower Bench is a shower bench (Model S200) and shower chair (Model S250) designed for use by people who are unable to stand while showering. Both products feature rust-resistant, polyester-coated steel frames and molded plastic seats with drainage holes. Model S200 is backless and model S250 has a backrest. DIMENSIONS (WxDxH): The seat is 20 x 12 x 15 inches. Overall depth is 16 inches. CAPACITY: 260 pounds. WEIGHT: Model S250 weighs 9 pounds; model S200 weighs 5.5 pounds....[More Information]
    
    
20. ETAC EDGE SHOWER CHAIR The ETAC Shower Chair is a shower chair designed for use by individuals with mobility disabilities. This height-adjustable, triangular shower stool fits in a corner. It is lightweight and is designed to ensure stable, safe and comfortable positioning. It is constructed of aluminum with a built-in flexibility that offers a firm stand on all three non-slip legs. The chair comes flat packed; is stackable, and requires no tools for assembly. DIMENSIONS (HxW): 16.7 x 21 inches. The seat base width...[More Information]
    
    
21. ETAC SWIFT COMMODE The Etac SWIFT Commode is a shower commode designed for use by individuals with balance, lower extremity, or mobility disabilities. Based on a modular concept, this height-adjustable chair can be configured to meet user needs. It includes an integrated pan with a lid and handle, which is removable. The lid is self-locking when the handle is lifted. This commode can be re-configured as an over-the-toilet riser or as a shower chair and can be used with or without the backrests, armrests, and seat ...[More Information]
    
    
22. ETAC SWIFT SHOWER CHAIR The Etac SWIFT Shower Chair is a shower chair designed for use by individuals with balance, lower extremity, or mobility disabilities. Based on a modular concept, this height-adjustable chair can be configured to meet user needs. The complete chair includes a backrest, armrests, and a soap and shampoo tray; however, the backrest, armrests, and tray can be removed as needed. The seat has a cut out on one side and is solid on the other; it may be assembled in either direction to suit the user. The...[More Information]
    
    
23. FOLD-UP SHOWER SEAT (MODEL 02210P & 02010p) The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. Designed for showering in a small space, this compact wall-mounted, height-adjustable seat has an aluminum frame and legs with rubber tips and a polypropylene molded seat with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall. DIMENSIONS (HxW): 19.5 to...[More Information]
    
    
24. FOLD-UP SHOWER SEAT (MODELS 02200P & 02000P) The Fold-Up Shower Seat is a folding shower seat designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. Designed for showering in a small space, this compact wall-mounted, height-adjustable seat has an aluminum frame and legs with rubber tips and a polypropylene molded seat with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seat folds up against the wall. DIMENSIONS (HxW): 18.75 t...[More Information]
    
    
25. FOLD-UP SHOWER SEAT (MODELS 04070P & 04270P) The Fold-Up Shower Seats are folding shower seats designed for use by individuals with mobility, lower extremity, or balance disabilities or arthritis. These wall-mounted, height-adjustable seats have stainless steel frames and polypropylene molded seats with drainage holes. The removable seat cushion is made of soft feel closed-cell polyurethane foam. When not in use, the seats fold up against the wall and a stainless steel linkage bar keeps the rubber-tipped legs parallel to the wall. DIMENSIO...[More Information]
    
    

Page 1 of 3    Next page »