Products are listed alphabetically.

Page 1 of 1

1. ADVANTAGE-RAIL SYSTEM The Advantage-Rail System is a standing transfer aid designed for use by individuals with mobility and balance disabilities. Intended for use beside the bed, toilet, or bathtub, the unit consists of a height-adjustable support rail with a padded horizontal handle and a floor plate. The rail fits in the low-profile floor plate with a push-down-and-turn motion, allowing the rail to be used in multiple locations. With a gentle lift, the handle pivots with the user to assist in taking small steps fo...[More Information]
   
   
2. Adaptive Device for Polecat Transfer. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of a Polecat to aid in wheelchair transfers for persons with some arm and leg muscle strength. Describes a turntable attachment made of two blocks of wood about 10 by 5 by 2 fastened together with a hinge on one side and a gate latch on the other; a semicircular platform with an 8 inch radius nailed to each block; and a hole drilled through platform and block to allow the device to be fastened around a Polecat. The patient places both fe...[More Information]
   
   
3. ERGOSTAND The Ergostand is a standing transfer aid designed to be used by individuals with balance, lower extremity, mobility, and severe physical disabilities. The Ergostand can be used to dress, clean and transfer individuals in need of additional support. The individual is supported by a band sling with a Velcro waist enclosure reinforced with two belts. A back support, a padded knee support and an anti-slip foot base ensure safety. Control of start and stop, motorized base, and 2-speed vertical moveme...[More Information]
   
   
4. HANDI-LIFT WALK BELT (MODEL 516XM, 516M, 517M, 518M & 518XM The Handi-Lift Walk Belt, models 516XM, 516M, 517M, 518M, and 518XM, is a standing transfer aid designed for use to aid transfers by individuals with balance, lower extremity, mobility, or walking disabilities. The belt is secured with a double Velcro closure, and its Miracle Grip inner lining grips the patient's clothing. The belt has four large padded vertical handles. It is normally used by two caregivers working together, but if necessary, one caregiver with training can use the belt with a...[More Information]
   
   
5. KNEE SUPPORT FOR ORBITAL TRANSFER PLATFORM The Knee Support for Orbital Transform Platform is a knee cushion for a standing transfer aid designed for use by individuals with balance, lower extremity and mobility disabilities. Designed to be used with the Orbital Transfer Platform (see separate listing), this cushion is made of polyurethane and clamps onto the rear back rails of the transfer platform. DIMENSIONS: 350 x 160 millimeters....[More Information]
   
   
6. LIFTVEST The LiftVest is a transfer aid designed for use with individuals with balance and mobility disabilities. This vest-style garment features an attached webbing harness that provides a dozen different hand holds for caregivers to use during assisted transfers. Designed to distribute pressure over the whole torso, this garment eliminates pressure points, and the harness features eight different adjustments to comfortably fit all male and female body types. Because the vest is designed to be an attra...[More Information]
   
   
7. ORBITAL TRANSFER PLATFORM The Orbital Transfer Platform is a standing transfer aid designed for use by caregivers to assist individuals with mobility and walking disabilities. Made with tensile steel, this device is designed to help transfer patients who can stand with support from one seated position to another. The person to be transferred stands on the platform at the base and holds on to the handles while facing the caregiver, then the caregiver tips the platform back and rolls it with the person to the desired locat...[More Information]
   
   
8. ORBITAL TRANSFER PLATFORM WITH KNEE SUPPORT (MODEL 805) The Orbital Transfer Platform with Knee Support, model 805, is a standing transfer aid designed for use by caregivers to assist individuals with balance, lower extremity, mobility and walking disabilities. Made with tensile steel, this device is designed to help transfer patients who can stand with support from one seated position to another. The person to be transferred stands on the platform at the base and holds on to the handles while facing the caregiver, then the caregiver tips the platfor...[More Information]
   
   
9. ORIGINAL LIFT WALKER, THE The Original Lift Walker is a walker with lifter designed for use by children and adults with mobility disabilities. This device also functions as a mobile stander, a gait trainer, a transfer assist, and a toilet assist. The hydraulic lifter eliminates the need for manual lifting. The height-adjustable walker is constructed of powder-coated mild steel tubing and disassembles for transport. Standard features include a U-shaped base (available in narrow or standard) with four caster wheels, a choi...[More Information]
   
   
10. PATIENT PIVOT TRANSFER DISK (MODEL H70407) The Patient Pivot Transfer Disk, model H70407, is a standing transfer aid designed for exchanges between one chair and another, or a wheelchair and a bed. The device consists of a rotating platform with ribbed rubber top and bottom faces. The top surface rotates while the bottom remains stationary, and internal friction pads control the rate of turning. DIMENSIONS: Disk is 0.5 inches high, and is available in diameters of 12 inches (H70407-0002) or 15 inches (H70407-0003). WEIGHT: Under 3 pounds...[More Information]
    
    
11. RETURN 7500 ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt....[More Information]
    
    
12. SOFT TRANSFER BELT (MODELS 527S & 527) The Soft Transfer Belt, models 527S and 527, is a standing transfer aid designed for use by caregivers when aiding transfers by individuals with balance, mobility, lower extremity, or walking disabilities. The soft, fully padded belt is slip resistant. It closes with a buckle at the front and the fastening can be adjusted for size. The belt is recommended for use with women who have a large bust or people whose body shape requires a narrower belt fastening. The belt has four large padded vertica...[More Information]
    
    
13. SUPERPOLE TRAVELER The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling ...[More Information]
    
    
14. TRANSBORDER The Transborder is a standing transfer aid designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The device is a rotating pole that can be used to transfer from one seated position to another (eg., from one wheelchair to another). The user first turns and locks the direction handle, then puts his/her knees and feet in place, grasps the direction handle and stands slighty using arm strength, and then rotates to the selected point. OPT...[More Information]
    
    
15. TRANSFER BELT (MODEL HA-4710) The Transfer Belt, model HA-4710, is a transfer aid designed for use by individuals with mobility disabilities or spinal cord injury. It is designed to help an assistant lift the user from a bed, chair, or wheelchair, or support the user in short-distance transfers. The belt has four webbed handle grips for safety when transferring. DIMENSIONS (LxW): The belt is 740 x 140 millimeters. Its strap is 740 millimeters long. WEIGHT: 205 grams....[More Information]
    
    
16. TRANSFER DISC The Transfer Disc is a standing transfer aid designed to assist caregivers in transfering individuals. The disc rotates on a graphite pad. The thin profile allows a transfer with minimal movement. DIMENSIONS: The disc has a diameter of 15 inches....[More Information]
    
    
17. TRANSFER HANDLE, THE (MODELS 2001, 2025, & 2025H) The Transfer Handle is a transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between th mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2001 is designed for people with limited or no ability to stand, for those who make difficult ...[More Information]
    
    
18. TURNING CUSHION (MODEL HA-4780) The Turning Cushion, model HA-4780, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This foam-padded cushion swivels 360 degrees in any direction to help the user in rising from a seated position. The cushion can be used in a vehicle or on a chair. Its removable cover is water washable. DIMENSIONS: 390 millimeters in diameter. WEIGHT: 1 kilogram. COLOR: Gray....[More Information]
    
    
19. TURNTABLE (MODEL 5085) The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for...[More Information]
    
    

Page 1 of 1