Products are listed alphabetically.

Page 1 of 1

1. 2-PIECE FAN CARD HOLDER SET The 2-Piece Fan Card Holder Set are playing card holders designed for use by individuals with fine motor and grasping disabilities or arthritis. The set comprises two brightly colored plastic holders which fan out to hold up to 15 cards. The fan can be held or placed on the table. DIMENSIONS: Card holder is 8 x 4 inches. COLOR: Blue....[More Information]
   
   
2. 4-PIECE CARD HOLDER SET The 4-Piece Card Holder Set is a set of playing card holders designed for use by individuals with fine motor and grasping disabilities. The set is comprised of four brightly colored plastic discs which hold the playing cards together. The holders are made of two plastic disks with foam pads in between them. DIMENSIONS: Discs are 2.5 inches. WEIGHT: 0.5 ounce each....[More Information]
   
   
3. CARD HOLDER -------- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create a card holder for individuals with grasping disabilities. To create this DIY card holder, put the lids together, top to top and lay them on a table. Then put one of the buttons in the center of the stacked lids. With the needle, poke two holes through the button holes into the center of the tub lids. Finally, pick up the stacked items and place the second button over the holes on the back side and sew together. Coffee can tops can be u...[More Information]
   
   
4. CARD HOLDER ---"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with grasping and other upper extremity disabilities to hold playing cards. To make this holder, put the lids together, top to top and lay them on the table. Place one of the buttons in the center of the stacked lids and poke two holes through the button holes into the center of the tub lids with the needle. Pick up the stacked items and place the second button over the holes on the back side. Sew together. MATERIALS: Two buttons, two ...[More Information]
   
   
5. CARD HOLDER The Card Holder is a playing card holder designed for use by individuals with upper extremity disabilities.This holder has a card slot with a clear barrier to keep cards in position. An extended front lip holds pencils and coins. These holders are sold individually or in sets of four with a deck of low vision playing cards. SIZES: Sizes are available for standard playing cards or for extra-large playing cards. DIMENSIONS: The standard card holder is 10 inches long and the holder for extra-large ...[More Information]
   
   
6. CARD HOLDER (MODEL H71254) The Card Holder, model 71254, is a hand held device designed to assist individuals who lack finger strength or dexterity to hold a hand of cards. The holder consists of two plastic disks with foam pads in between that allows cards to be added or removed without disturbing the other cards. Sold in boxes of 4 holders. WEIGHT: 1/2 ounce....[More Information]
   
   
7. CARD HOLDER - CLEAR PLASTIC The Card Holder-Clear Plastic is a playing card holder designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. This slotted clear plastic holder keeps playing cards at an angle to improve visibility and provides hands free viewing. The device can also be used to hold recipes or memos. DIMENSIONS: 10 inches long. WEIGHT: 0.2 pound....[More Information]
   
   
8. Card Holder. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device on which cards can be arranged and held by persons with limited hand strength. Card holder made with two plastic coffee can lids turned back to back, fastened together with a pop rivet in the center. Sponge material can be glued to the front and back to make it easier to hold. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER...[More Information]
   
   
9. Card Holder. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Boxes to hold playing cards for a person with restricted hand movement or use of one hand. Describes two simple devices to hold playing cards upright in a row: A small cardboard box, such as a candy box, with the box slipped inside the upsidedown cover; and a wooden block about 10 by 3 by 1 1/2 inches with two lengthwise slots sawed into it. Includes photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the H...[More Information]
   
   
10. DELUXE CARD RACK (MODEL 9430) The Deluxe Card Rack, model 9430, is a playing card holder designed for use by individuals who have difficulty holding cards in their hands. This walnut-stained fiberboard rack holds all cards needed for any game. Features include slanted grooves and tiered rack for good visibility to the user, but not to opponents. DIMENSIONS (LxW): 9.5 x 5 inches. COLOR: Walnut....[More Information]
    
    
11. FOAM CARDHOLDER --- DO IT YOURSELF ENTRY --- PURPOSE: To create a lightweight playing card holder for a young child with disabilities. Simply use a piece of foam and cut a diagonal shelf for the cards to sit in. MATERIALS: Light weight piece of foam. TOOLS: Cutting knife. SKILLS: Cutting. TITLE: Foam Cardholder. JOURNAL: Ideas to share: Tots n’ Tech. REF: http://www.asu.edu/clas/tnt/home_files/ideas/communication/picture/foamcardholder.pdf. PAGES: 1 with cover. Idea submitted by: Maria Jones, Oklahoma. For more...[More Information]
    
    
12. FOUR SUITER CARD HOLDER (MODEL NC29103) The Four Suiter Card Holder, model NC29103, is a playing card holder designed for use by individuals with fine motor or grasping disabilities or arthritis. This wooden holder has four angled slots to hold cards and aid in visibility. DIMENSIONS (WxD): 9.5 x 5 inches. COLOR: Natural wood....[More Information]
    
    
13. HAIRBRUSH CARD HOLDER --- “DO IT YOURSELF” ENTRY --- PURPOSE: To create a card holder for individuals with grasping disabilities. The hairbrush holds the cards in place while removing the need for an individual to hold his or her cards during card games such as Old Maid, Go Fish, or Crazy 8’s! For individuals requiring more support and stability, Velcro can be used to secure the hairbrush to a non-skid placemat. TITLE: Hairbrush Card Holders. JOURNAL: Ideas to share: Tots n’ Tech. REF: http://www.asu.edu/clas/tnt/hom...[More Information]
    
    
14. MILBAT PLAYING CARD HOLDER The Milbat Playing Card Holder is a playing card holder designed for use by individuals with arthritis, hand tremors, or use of only one hand. This upward curved device has three rows with elevated slots to keep cards in position. The holder can be placed on a table or any flat surface and can accommodate 15 cards per interval....[More Information]
    
    
15. PIATNIK DELUXE CARD CADDY The Piatnik Deluxe Card Caddy is a playing card holder designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. This holder stands on a table or can be held in the hand and holds up to 25 cards. DIMENSIONS (WxH): 8 x 3.5 inches....[More Information]
    
    
16. PLASTIC CARD HOLDER The Plastic Card Holder is a playing card holder designed for use by individuals with reduced finger control or disabilities of the hand. Made of clear plastic for greater visibility, these holders rest on the table top, hold cards upright, and feature a front ledge for pencils or coins. DIMENSIONS: Available in 10 or 15 inches long....[More Information]
    
    
17. PLASTIC CARD HOLDER (MODEL 9431) The Plastic Card Holder, model 9431 is a plastic playing card holder with a deck of low vision playing cards designed for use by individuals with low vision who have difficulty holding cards. DIMENSIONS (HxLxW):1.25 x 10 x 2 inches....[More Information]
    
    
18. PLASTIC CARD HOLDER (MODEL NC29102) The Plastic Card Holder, model NC29102, is a lightweight playing card holder designed for use with limited grasping ability and manual dexterity. The unit consists of a base with a card slot in the top. DIMENSIONS: 2 x 1 3/8 x 9 inches. The card slot tapers from .5 inch to 1/8 inch....[More Information]
    
    
19. PLAYING CARD HOLDER --- DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals with arthritis or grasping disabilities to play cards. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a set of four playing card holders. The base is formed of 1 x 2 inch lumber and two pieces of molding are glued to the top with a slot in between to hold the cards. MATERIALS: Four foot long piece of 1 x 2 inch lumber, an eight foot long piece ...[More Information]
    
    
20. PLAYING CARD HOLDER The Playing Card Holder is a playing card holder designed for use by individuals with low vision, arthritis, or fine motor or grasping disabilities. This clear acrylic holder holds cards snugly in an upright position. The unit can also be used with recipe cards and instructions. Pencils or small coins can fit on the extended front of the holder. DIMENSIONS: 10 inches long. WARRANTY: 12 months on parts and labor....[More Information]
    
    
21. PLAYING CARD HOLDER (MODEL 614600) Metal playing card holder. Unique tension device holds 13 cards. Adhesive bottom holds firmly to table. For one handed card playing....[More Information]
    
    
22. PLAYING CARD HOLDER (MODEL BK9431) The Playing Card Holder, model 9431, is a playing card holder designed for use by individuals with fine motor and grasping disabilities. Features include extruded 2-inch wide base that is 1 3/8 inches in height, and a 1/2-inch slot that narrows to 1/8 inch for easy entry of cards. DIMENSIONS: The holder is 10-inches long....[More Information]
    
    
23. PLAYING CARD HOLDER (MODEL H7125400112) The Playing Card Holder, model H7125400112, is designed for use by individuals with arthritis or other grasping or upper extremity disabilities. The holder has two clear plastic tiers and a hardwood base with non-skid rubber pads. The plastic tiers hold up to 18 cards. DIMENSIONS (HxLxW): .75 x 2.5 x 6 inches. Warranty: 12 months parts and labor....[More Information]
    
    
24. PLAYING CARD HOLDER (MODELS 71252-0010, -0015) The Playing Card Holder is a slotted holder designed so that cards can be added or removed easily. The holder is made of ABS plastic and is cleanable. The base of the holder has a small lip and extends far enough to hold a writing utensil. Two models are available: 71252-0010 for standard sized cards, and 71252-0015 for extra-large sized cards. DIMENSIONS: 2 x 1 3/8 inches....[More Information]
    
    
25. THREE SLOTTED CARD HOLDER The Three Slotted Card Holder is a playing card holder designed for use by individuals with upper extremity disabilities. This solid wood block has three angled grooves for three rows of cards. DIMENSIONS: 7 inches wide....[More Information]
    
    

Page 1 of 1