Suspension Frame for Toys
Products are listed alphabetically.
Page 1 of 1
-
ADAPTED PLAY FRAME -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To custom adapt the height of a play frame for a child with multiple disabilities including cerebral palsy, epilepsy, visual impairment, and developmental delay. The child’s current play frame provides her with stimulation and entertainment. The play frame consists of a square fabric base on which the child lies, and two hooped rods with padded covers which anchor in pockets on opposite corners of the square and cross in the middle. The child ha...[More Information]
-
ALL PURPOSE TOY BAR -------- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized adaptation of an all-purpose toy bar for a child with severe disabilities. This adaptation was created using a bunch of PVC to put together a giant toy bar. It was made very large so the child’s recliner and stander could be used with it. The dimensions could easily be adjusted to fit any child's needs. The sides are 12 inches wide and the bottom has an extra 5 inch piece of PVC plus a 3-way joint on each side for added sta...[More Information]
-
KAYE PLAY FRAME (MODEL RS1) The Kaye Play Frame, model RS1, is a suspension frame for toys designed to encourage reaching, batting and swiping skills for children with neurological, upper extremity, or severe physical disabilities. The height-adjustable aluminum frame enables the toys, hung from the included plastic flowers, to be moved farther from the child to encourage further skill development as skills improve. The base of the frame fits around Kaye corner chairs, bolsters, and prone positioners (see separate entries)...[More Information]
-
Toy Hanger. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Toys can be hung on the plastic tubing at exactly the correct height and distance from the child. The child may lie under the hanger or sit in front of it for stimulation or to play with various types of toys that may be attached with tape. Hanger baseboard is made of plywood cut to 6 by 24 inches. End blocks are contructed of softwood 1 1/2 by 1 1/2 by 2 inches and mounted on plywood base. A 3/4" diameter piece of stiff plastic tubing 4 feet 6 inc...[More Information]
Page 1 of 1
