Products are listed alphabetically.

Page 1 of 2    Next page »

1. CONTOURED HEADREST ASSEMBLY The Contoured Headrest Assembly is designed for individuals requiring medial/lateral, posterior and rotary support. The ABS plastic construction allows for customized molding with a heat gun. The mounting hardware (included) allows height and forward/backward adjustment with a slide bracket and knob. The headrestt is also available upholstered. SIZE: Large (model ASCH-LG) or small (model ASCH-SM)....[More Information]
   
   
2. CRE FLIP DOWN HEADREST The CRE Flip Down Headrest was developed to provide ease in transferring. The headrest flips down and out of the way with just one hand but remains attached to wheelchair. Constructed with steel tube mounting, the headrest is a vinyl upholstered, padded flat pad. Comes with mounting hardware ($130), which is also available for purchase separately ($90)....[More Information]
   
   
3. DEEP U HEADREST (MODEL DUHR100) The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches....[More Information]
   
   
4. EXTENSION HEADREST (MODEL 72) The Extension Headrest, model 72, is designed for use with wheelchairs with push handles. The unit attaches to the wheelchair push handles with bracckets (included) to extend the back upholstery to form the headrest extension. DIMENSIONS: Adds 18 inches to the wheelchair back height....[More Information]
   
   
5. FRONT MOUNT HEIGHT ADJUSTMENT HEADREST BRACKET AND PADS Three custom size pads mounted on angled Kydex bracket which slips over top of tall solid back. Mounting knob in solid back secures headrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit ($140), or bracket ($40) or pads may be ordered separately....[More Information]
   
   
6. HEAD REST SUPPORTS (MODELS 430C1, 430C2, 430H1, 430H10, 430N1 SERIES) The Head Rest Supports are headrests and neckrests made from molded, contoured foam, and reinforced with flexible steel. They are available in large headrest, small headrest, combination headrest and neckrest, large neckrest, small neckrest, and lateral control. They can be modified as needed by bending the steel insert to the desired shape....[More Information]
   
   
7. HEAD STABILIZER The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, b...[More Information]
   
   
8. HEADREST / NECKREST HARDWARE: HARDBACK HEADREST HARDWARE (MODELS 430F7, 430F2, 430F6, & 430F5) & SLING BACK HARDWARE (MODEL 446K1) The Headrest and Neckrest Hardware, consisting of Hardback Headrest Hardware and the Sling Back Hardware, is a support system designed to attach Otto Bock headrests and neckrests to the back of a wheelchair. Model 430F7 has two ball joints for multi directional adjustability, including horizontal and vertical planes, for hard or rigid seat backs. Model 446K1 has attachment hardware for wheelchair frame of sling backs....[More Information]
   
   
9. HEADREST AND HARDWARE The variety of Headrests available include flat, radius, curved, Optional custom headrest pads to be attached to the solid back insert or to slingback chair with special bracket are also available. Headbands may also be attached. Type of Hardware headrest adjustments available are vertical height, forward/ back and ball and socket pivot. Also available with flipdown hardware (listed separately). COLORS: 38 colors available....[More Information]
   
   
10. HEADREST, LARGE & SMALL (MODELS 1450, 1451-01, -21, -31, -32, -33, 1460, 1461-01, -21, -31, -32, -33) The Headrests are designed for use with wheelchairs. Made of 16- gauge steel, they are plated to resist corrosion and have a recess in the center for two rows of ##10-32 press nuts. Both ends are contoured. The headrests are deburred for a smooth surface. OPTIONS: Available in metal only or with padding of 1 inch open cell foam, 3/8 inch closed-cell foam, and a cover. Covers are available in Terry, Lycra, and Heavy Weight Nylon. COLORS: Black, blue and red....[More Information]
    
    
11. HEADREST, PAD & BRACKET Headrest ($58.65 to 53.35). Easily removed pad has curved plastic base in 3 sizes. 1/2 inch foam cushioning, vinyl covered. Mounts to solid back insert with bracket ($108.35) which allows height, lateral and angle adjustments. 2 to 4 inches high, 5 to 9 inches wide....[More Information]
    
    
12. HEADWING HEADREST Two custom size pads, mounted to each side of tall solid back or splitback with angled Kydex brackets for lateral head support. Brackets slotted for adjustment of width. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately....[More Information]
    
    
13. HEIGHT ADJUSTABLE (SPLITBACK) HEADREST Custom size pad and slotted aluminum bar mounts to shoulder height solid back with knob for easy removal and height adjustment. Pad is 1/2 inch thick medium density foam over 1/2 inch birch plywood. ....[More Information]
    
    
14. LARGE OXBOW HEADREST (MODEL LOX100) The Large Oxbow Headrest, model LOX100, is a headrest designed for use by use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side, and it is made of multi-layered foam with a zippered cover. DIMENSIONS (LxH): 16 x 8 inches....[More Information]
    
    
15. LARGE PADDED HEADREST (MODEL CPH100) The Large Padded Headrest, movel CPH100, s a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. This large multi-layered foam padded headrest provides comfort, support, and positioning. The headrest comes with a zippered Triptex cover. DIMENSIONS: 13 x 10 inches....[More Information]
    
    
16. LATERAL HEAD SUPPORT WITH MOUNT BAR (MODEL 6814) The Lateral Head Support with Mount Bar, ##6814 is a headrest designed for use with feeder seats that can be positioned to support from the occipital area and higher. The support is made of foam padding that comes around the sides of the head to provide support. SIZES: Small ($99), Medium ($109), and Large (115). COLOR: Red, blue, or orange....[More Information]
    
    
17. MINI HEADREST (MODEL 6829) The Mini Headrest, ##6829, is a small headrest with sidewings mounted on a channel bracket steel bar for mounting on a wheelchair or seating system. The device is made of an inner core of molded nylon with an outer cover of vinyl coated Ensolite foam. DIMENSIONS: 12 x 5 inches. COLOR: Black....[More Information]
    
    
18. MODULAR HEAD REST (MODEL 6812) The Modular Head Rest with Mount Plate, ##6812, is a head and neck support designed for use with the Hensinger Break-Away-Mount Plate (see separate entry). An adjustable vertical connector attaches the two devices together. Three vinyl coated foam discs cradle the head and may be adjusted for the use of head switches. COLOR: Black....[More Information]
    
    
19. NECK/SHOULDER POSITIONING COLLAR ASSEMBLY The Neck/Shoulder Positioning Collar Assembly is a headrest designed to replace both occipital support and rigid shoulder positioners or other anterior thoracic supports for users with moderate to low "tone." The malleable aluminum collar provides posterior neck support and superior and anterior shoulder support. It is padded with closed cell foam and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/back adjustment with a ...[More Information]
    
    
20. OCCI DISH The OCCI Dish is a head support designed to relieve preesure from the back of the head. This support features a detachable cervical pad and a Durafilm-coated core for moisturer resistance....[More Information]
    
    
21. OCCIPITAL BAR ASSEMBLY The Occipital Bar Assembly is a headrest designed to provide posterior head support for individuals with good medial/lateral and rotary head control. The straight (model ASOB-ST) and contoured (models ASOB-LC and ASOB-SC) occipital bars are padded with neoprene rubber and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/backward adjustment with slide bracket and knob. DIMENSIONS: The Straight bar is 6 inches long. The Con...[More Information]
    
    
22. OCCIPITAL HEADREST SYSTEMS & 2-STEP HEADREST SYSTEMS The Occipital Headrest Systems are head supports designed to provide support beneath the occipital portion of the head, as well as laterally. An aluminum ban inside the headrest covers may be bent, shaped, or cut down. Models are available fixed and swing-away, with or without headbands (nos. 91100 to 93200). The 2-Step Headrest models are appropriate where additional surface area and contact are required. They have an ABS plastic base which can be heated and re-shaped for a more precise fit. Th...[More Information]
    
    
23. ORTHOCARE SUPRONE HEADREST (MODEL 2018) The Orthocare Suprone Headrest ##2018 is a contoured headrest designed to provide stable supine or prone positioning. It is made of polyurethane foam, and has a cross ventilation slot for breathing. SIZES: One size fits all....[More Information]
    
    
24. OXBOW HEADREST (MODEL OX100) The Oxbow Headrest, model OX100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side. DIMENSIONS: 15 x 4 inches....[More Information]
    
    
25. POWER HEADREST The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip...[More Information]
    
    

Page 1 of 2    Next page »