Products are listed alphabetically.

Page 1 of 1

1. 5100 SERIES PASSIVE TELECOIL The 5100 Series Passive Telecoil is a loop hearing aid amplifier designed for use by individuals who are deaf or hard of hearing. Coils have a polyurethane coating and are available with various electrical parameters and with solid or Litz wire leads in radial or axial lead configuration. DIMENSIONS: Avaiable with diameters from 1.2 to 3.21 millimeters and lengths from 3.57 to 8.89 millimeters....[More Information]
   
   
2. AUDIO LOOP. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Small audio loop to be used in one-on-one conversations. Induction loop systems are commercially available but are quite expensive. This document includes a reprinted article, "Induction Loop Systems" from Hearing Impairments, Vol 36, No 2 (1985) pp 26-29?. It uses simple audio equipment and provides diagrams on construction and how to install it. SKILLS REQUIRED: Electronics. AUTHOR:Paschell, William. TITLE: Do-it-Yourself Listening and Signaling ...[More Information]
   
   
3. CHORUS UNIVERSAL LISTENING SYSTEM The CHORUS Universal Receiver is a personal amplification and receiver system for FM, infrared, induction loop, radio, direct audio input, and microphone input for individuals with a hearing impairment. CHORUS works with almost any make or model transmitter including its own line of FM, infrared and loop system transmitters. It may be used almost anywhere (in the home, movies, theater, places of worship, meetings) with almost any type of transmitter that might be in place. There are also persona...[More Information]
   
   
4. HEARIT PERFECT COMBO (MODEL 225) The Hearit Combo, model 225, is a communication aid for individuals with hearing disabilities coupled with attention deficit disorder (ADD), attention deficit hyperactivity disorder (ADHD), or traumatic brain injury (TBI). This set is designed for those who are easily distracted and have difficulty distinguishing speech from background noise. Included are the Hearit, model 200, communication aid (see entry) and a neckloop telecoil for use with behind-the-ear (BTE) hearing aids. ...[More Information]
   
   
5. INDUCTION NECK LOOP (MODEL 1-07095-00) The Induction Neck Loop, model 1-07095-00, is a hearing aid accessory designed for use by individuals who are deaf blind. This device helps hearing aid users who are blind or have low vision to understand voices on talking books and other cassette tapes. This audio accessory enables telecoil-equipped hearing aids to directly receive a signal from a cassette tape recorder/player with a 3.5-millimeter headphone jack, including those sold by the American Printing House for the Blind (see separate e...[More Information]
   
   
6. MAXIT PULSE The Maxit Pulse is a hearing aid accessory designed for use by individuals who are hard of hearing. This wireless inductive loopset utilizes Bluetooth technology to enable users to enjoy clear telephone conversations without external noise interference. This loopset supports A2DP connections which allows the user to have wireless communication with their Bluetooth-enabled (version 1.2/2.0) mobile phone. The user also can listen to sounds from any device equipped with a 3.5 mm stereo output socke...[More Information]
   
   
7. MICROLOOP & MICROLOOP FM The Microloop and Microloop FM are small, portable induction loop amplification systems designed for TV viewing, classrooms, meetings, and automobiles (with optional auto kit). These units will connect to existing public address systems. Microloop is compatible with all "T" switch equipped hearing aids, cochlear implants, vibro-tactile devices, and induction receivers. MICROLOOP FEATURES: clip-on microphone with 10 ft. cord; ability to connect two microphones; volume and tone controls; automatic...[More Information]
   
   
8. MICROLOOP II & MICROLOOP II FM The Microloop II is an audio loop amplification system designed for use by individuals who are hard of hearing. Place the loop wire around the listening area to transmit and amplify speech signals to the "T" coil switch found on many hearing aids. Designed for use in a conference or classroom setting, the system includes loop wire on a wind up spool, a clip on microphone for the primary speaker, and a carrying case. The Microloop II FM performs the same function but includes a wireless microphon...[More Information]
   
   
9. NL 100 INDUCTION NECKLOOP FOR POWERTEL SERIES The NL 100 Induction Neckloop for PowerTel Series is a small, portable induction loop amplification system designed to allow people who are hard of hearing who use hearing aids equipped with a “T” switch to hear incoming audio from an Amplicom PowerTel series telephone. The NL 100 fits around the user’s neck and connects to the telephone handset. The volume can be amplified up to 26 decibels (dB). The NL 100 has a battery status indicator light and an integrated microphone through which the use...[More Information]
   
   
10. OTICON LA35-4M The Oticon LA35-4M is a large area induction loop amplifier which covers up to 4500 sq. feet. It is equipped with a built-in mixer which enables up to four mic/line inputs to be connected at one time. Separate bass and sensitivity adjustments for each input. An additional line in/out connector for tape player, radio, TV, etc. is provided. Other amplifier features include automatic gain control for consistent field strength, active loop equalizer to compensate for high frequency losses, and loop ...[More Information]
    
    
11. OTICON MINICOM TELEMAGNETIC LOOP SYSTEM Induction loop system. Provides user with hearing aid disturbance free listening from a TV set. Sound reception is improved due to elimination of poor room acoustics. Does not entirely exclude background sounds, but reduces the sound level. Outside sounds can still be heard. May be used with any television set and with transmission up to 30 feet away. Plug into standard 110 volt wall outlet and run single wire under carpet or along baseboard....[More Information]
    
    
12. OTICON MLA-3X The Oticon MLA-3X is a small area induction loop amplification system which covers up to 600 sq. ft. It comes with one microphone and all parts for installation. The unit is equipped with two additional inputs for direct coupling to the TV, radio, tape player, etc. The unit is portable and can be powered from any 12 volt source. Special counter installation kits (for providing access at sales/service locations) is also available....[More Information]
    
    
13. OTICON TM11 The Oticon TM11 is a pocket-type telecoil receiver designed for use with induction loop systems. Receiver operates like a hearing aid in the T-coil position and must be placed in a vertical position (perpendicular to the loop). The unit is equipped with a clip for secure placement. Can be used with ear-loop on left or right ear. Optional stethoscope is available for binaural listening....[More Information]
    
    
14. OTICON TM401 The Oticon TM401 is a hand-held telecoil receiver designed for use with induction loop systems. Receiver operates like a hearing aid in the T-coil position and must be placed in a vertical position (perpendicular to the loop. Optional wall bracket which holds four receivers is available at an additional charge....[More Information]
    
    
15. RADIO-AIDE SYSTEM Am induction loop amplification system. System consists of LPB model AM- 5CL AM transmitter, 300 feet of special radiating cable antenna with connectors installed, and a cable terminating unit. Antenna is placed around the room. Transmitter plugs into existing PA system. System uses AM broadcast band; uses standard AM pocket radios as receivers....[More Information]
    
    
16. SATELLITE III The Satellite III is an audio loop amplification system designed for use by individuals with hearing disabilities. Designed for use in public facilities, such as theaters and places of worship, this system connects to the audio line level output of most sound systems and can cover 300 seats per system in use. The system is compatible with all telecoil-equipped hearing aids and cochlear implants. The loop wire is placed around the listening area to transmit and amplify speech signals to the telec...[More Information]
    
    
17. SUPERLOOP PRO III The Superloop PRO III is an audio loop amplification system designed for use by individuals with hearing disabilities. Designed to be used in public facilities that do not have a public address system, this standalone signal processing system can cover areas with a perimeter extending up to 325 feet. Larger areas may be covered by connecting Satellite III (see separate entry) systems to the Superloop PRO III. A built-in mixer accepts up to six microphones and two line level inputs (microphones n...[More Information]
    
    
18. UNIVOX DLS-50 DOMESTIC LOOP SYSTEM The UniVox DLS-50 Domestic Loop System is a loop amplification system designed for use by individuals who are deaf or hard of hearing. By enabling a hearing aid equipped with a telecoil to function as an in-the-ear loudspeaker, this home loop system helps the user to Hear television, radio, telephone, & voices despite amvient noise. The system has a small, thin amplifier, accompanied by a thin Loop Pad that slips under a chair, and/or a long wire loop that covers up to 600 square feet. The ampl...[More Information]
    
    
19. UNIVOX LOOP LISTENER (MODELS 230450 & 230453) The Univox Loop Listener, models 230450 and 230453, is a loop amplification system testing device designed for testing whether a loop amplification system is operational, and a personal loop receiver designed for use by individuals who are deaf or hard of hearing but do not have a hearing aid or whose hearing aid does not have a T-coil. As a test instrument, this unit provides the installer with the information needed to adjust an installation according to the International Electrotechnical Comm...[More Information]
    
    
20. WILLIAMS SOUND NECKLOOP INDUCTION COIL The Williams Sound Neckloop Induction Coil is an induction loop amplification system designed to be used in conjunction with hearing aids for individuals who are hard of hearing. The unit is designed to magnetically couple audio output from a listening system into a hearing aid equipped with a telephone coil. The device works with tape recorders, televisions, or any device having an 8-16 OHM audio output through a 3.5 millimeter (mm) jack. The user places the loop over the head and around the ne...[More Information]
    
    

Page 1 of 1