Products are listed alphabetically.

Page 1 of 1

1. ADJUSTABLE BACK The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting...[More Information]
   
   
2. INCREDIBACK MOLDABLE RECLINING BACK SYSTEM The IncrediBack Moldable Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and can be molded to accommodate kyphosis, scoliosis, and other spinal curvatures. The supports can be remolded as the user's needs change. The unit attaches easily to most chairs, reclines up to 20 degrees, and folds with the wheelchair. SIZES: Standard and tall. DIMENSIONS (WxH): T...[More Information]
   
   
3. INCREDIBACK RIGID RECLINING BACK SYSTEM The IncrediBack Rigid Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and is designed for use by individuals without spinal curvatures who require relief from forward or lateral leaning or who rquire additional comfort. The unit attaches easily to most chairs and reclines up to 20 degrees. The tall modesl include a moldable headrest above the rigid shell....[More Information]
   
   
4. RECLINING WHEELCHAIR BACKREST (SERIES 7031) The Reclining Wheelchair Backrest, series 7031, is a reclining wheelchair conversion designed to convert a standard wheelchair to a reclining chair. This backrest offers five to twenty-five degrees of tilt and features six compartments filled with foam pads that may be added to or removed to meet the positioning needs of the user. OPTIONS: Headrests and armrest pads. DIMENSIONS: This backrest is offered in 16 and 18 inches wide and in heights of 19, 24, and 33 inches....[More Information]
   
   
5. TILT, THE Reclining wheelchair conversion transforms a normal reclining wheelchair frame into an orientation in space wheelchair frame. Maintains a fixed hip position. Seat width adjusts 14 to 18 inches. Seat depth adjusts 19 to 23 inches. Standard front rigging includes footrests only, does not include elevating legrest pads. Includes mounting hardware, one allen key, four wheelchair telescope tube spacers, and instructions included. Available in five models: tilt with no arms, full length arms, desk arm...[More Information]
   
   

Page 1 of 1