Products are listed alphabetically.

Page 1 of 2    Next page »

1. ACCESSORIES THRESHOLD RAMP --- DISCONTINUED. (Verified 12/2005) RETAINED IN DATABASE FOR REFERENCE.--- The ACCESSories Threshold Ramp is designed to provide ADA compliance of accessible door thresholds. This ramp brings thresholds of a maximum height of 1.5 inches into compliance, and has a built-in complying slope of 1:15. The ramp is molded from a black, fire retardant, high durometer synthetic rubber grooved for drainage. It is UV protected, easily trimmed for a custom fit, have a non-skid surface, and are scuff resist...[More Information]
   
   
2. ADAPTA-RAMP --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- The ADAPTA-Ramp is a portable ramp designed to convert short run stairs into gentle slopes for use by wheelchair users, persons with limited mobility, and strollers. The ramp has a patented, folding, scissors-style extension design. Its interconnecting, interlocking components adjust to fit existing buildings to provide safe and solid access. Support legs adjust to the stair tread height and lock into place to handle maxi...[More Information]
   
   
3. ALUMINUM THRESHOLD RAMP -- DISCONTINUED. VERIFIED 10/2012. RETAINED IN DATABASE FOR REFERENCE. -- The Aluminum Threshold Ramp is a portable threshold ramp designed for individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or scooters. Made of heavy duty aircraft aluminum, this portable ramp provides access for wheelchairs and scooters to doorways, sliding glass doors, and raised landings. DIMENSIONS (HxLxW): 3 x 17 x 34 inches. CAPACITY: 600 pounds. ...[More Information]
   
   
4. BARRIER-FREE ACCESS RAMPS. --- DISCONTINUED. (Verified 12/2005) RETAINED IN DATABASE FOR REFERENCE.--- Wheelchair ramp. Can be assembled in any configuration. Modules are 80 inches in length, 40 inches wide and 2 inches thick. Each weigh 200 pounds. Zinc chromate finish. Handrail height is 30 inches, finished with grey powder paint. Length of handrails extends 12 inches beyond start end of ramp. Guard rails are 5 inches in height and have a galvanized finish. The startup module angle is 5 degrees. Modules are fabricated o...[More Information]
   
   
5. CHANNEL RAMPS --- DISCONTINUED. (Verified 05/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Channel Ramp is a two-track ramp designed to provide access over curbs and steps for individuals who use standard wheelchairs. These aluminum tracks have a fixed one-piece design and safety side rails. DIMENSIONS: Five feet long with a 4.75 inch clearance between the rails. CAPACITY: 350 pounds. WEIGHT: 5.75 pounds....[More Information]
   
   
6. DO-IT-YOURSELF RAMP KIT --- DISCONTINUED. (Verified 10/96) RETAINED IN DATABASE FOR REFERENCE. --- The Ramp Systems Do-It-Yourself Ramp Kit is a ramp building kit for applications in public buildings, at curbs, on vans, or in homes, for people with limited mobility. When built to user specifications, these ramps are adjustable and reusable. Each kit contains an Illustrated Plan Guidebook, two aluminum ramp ends, and mounting hardware. Materials needed but not included in the kit are lumber, glue, wood screws, and tools...[More Information]
   
   
7. EASY TO BUILD MODULAR RAMP SYSTEM (MODELS 71110, 71111, & 71112) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Easy To Build Modular Ramp System is a modular ramp designed for use by individuals with mobility or walking disabilities. This freestanding system, made of aircraft-quality aluminum, can be used for access to a home entrance with or without existing steps or a porch. DIMENSIONS: Length is 8 feet (model 71110), 16 feet (model 71111), or 24 feet (model 71112). All models are 36 inches wide. CAPACITY: 850 pounds....[More Information]
   
   
8. EVAC/RAMP --- DISCONTINUED. (Verified 08/96) RETAINED IN DATABASE FOR REFERENCE. --- The Evac/Ramp is a ramp for commercial busses designed to be an emergency exit route for wheelchair users or senior citizens when the power lift is inoperable. The ramp has a patented folding design which quickly extends into a ramp or stairs for safe exits from busses. The ramp adapts public transportation services to conform to assisted wheelchair access. The unit folds accordian- style for storage. A mounting plate sec...[More Information]
   
   
9. FIBERGLASS RAMPS --- DISCONTINUED. (Verified 4/97) RETAINED IN DATABASE FOR REFERENCE. --- The Fiberglass Ramps are ramps designed to provide access for people who use wheelchairs and scooters. The lightweight ramps may be installed for permanent placement or used as a temporary, portable ramp. They have a full non-skid surface with side guards. DIMENSIONS: Available in 3-, 5-, 6- and 10-foot lengths and 27- (standard) and 36-inch widths. Custom dimensions are also available. CAPACITY: 600 pounds. WEIGHT(by ...[More Information]
   
   
10. FOLD & CARRY RAMPS --- DISCONTINUED. (Verified 4/97) RETAINED IN DATABASE FOR REFERENCE. --- The Fold & Carry Ramps are portable ramps that provide access to persons using wheelchairs and scooters. These aluminum hinged ramps are designed to fold up such that they can be carried like a suitcase and have a built-in handle. There is a safety lip on each side of a ramp. DIMENSIONS (LXW): 3 or 5 feet x 30 inches. These ramps fold to 15 inches wide. CAPACITY: 600 pounds. WEIGHT: 18 pounds (3 foot ramps); 30 pound...[More Information]
    
    
11. HANDI-RAMP --- DISCONTINUED. (Verified 12/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Handi-Ramp is a closed side-supported, fiberglass ramp designed to provide a child-safe, maintenance free, and rust- proof means of accessible entry to buildings and residences for wheelchair and scooter users and persons pushing children in strollers. The standard structure has a box beam design: kiln- dried, grade A dimensional lumber with a fiberglass lamination. The fiberglass surface is stain-resistant and clea...[More Information]
    
    
12. HANDICAP RAMP --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Handicap Ramp is designed to allow wheelchair users to get in and out of van-type vehicles and buildings. It is maintenance free and portable. Standard features include one-person operation; spring assisted, skid resistant, aluminum or steel construction; and side or rear door mounting. No vehicle modification is necessary for use. The ramp comes in portable folding, portable nonfolding or permanent styles. Stair lo...[More Information]
    
    
13. INDIANA RAMPS --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Indiana Ramps are indoor and outdoor portable ramps for permanent or semi- permanent applications. The ramps are constructed of heavy-duty, lightweight aluminum and feature handles, safety end caps, non-skid safety tracks, a flanged threshold plate, and adjustable stabilizing legs with non-slip rubber feet. The feet are available 8 to 30 inches in height and spaced 8 to 9 feet apart. OPTIONS: Custom ramps designed to us...[More Information]
    
    
14. LIGHTWEIGHT RAMP (MODELS WC079M-52 & WC080M-52) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Lightweight Ramp is a portable ramp designed for making small stairways, entrance ways, curbs, vans, or other vehicles accessible to wheelchair users. The ramp consists of two tracks; each track section comes apart for transport and storage. The ramps are constructed of 1.25-inch square steel tubing with 1-inch square side couples; the ramp bed is made of heavy-gauge flattened, expanded metal for a non-skid surface....[More Information]
    
    
15. LIGHTWEIGHT TELESCOPING RAMPS --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Lightweight Telescoping Ramps are telescoping tracks designed to provide access over curbs and steps for individuals who use standard wheelchairs. These aluminum ramps lock in position and feature vinyl end pads and side rails for safety. The five-foot model includes a carrying bag that hangs on the back of the wheelchair. The five- and six-foot ramps come in two sections, while the other models have a height-adjust...[More Information]
    
    
16. MINI RAMP --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Mini Ramp is a 1-piece portable ramp designed for use with a single step. The ramp is made of high strength aluminum with a slip-resistant surface. End plates have vinyl pad for slip resistance. CAPACITY: Supports up to 340 pounds. DIMENSIONS (LxW): 30 x 30 inches....[More Information]
    
    
17. ONE-STEP MINIRAMP --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- The One-Step Miniramp is a ramp designed to provide wheelchair or scooter users with access over one step or a curb. The ramp is constructed of lightweight, high-strength aluminum with a slip-resistant deck and side rails. The ramp ends have vinyl pads for slip resistant traction. DIMENSIONS (WxL): 30 x 30 inches. CAPACITY: 550 pounds. WEIGHT: 22 pounds....[More Information]
    
    
18. PORTA-DECK 10 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Porta-Deck 10 is a portable or permanent ramp designed to provide wheelchair or scooter users with access to vans, steps, or curbs up to 36 inches high. The ramp is constructed of 3 high strength aluminum sections with a slip-resistant deck. The ramp end plates have vinyl pads for slip resistant traction amd a safety pin to secure the ramp. DIMENSIONS: 10 feet long. CAPACITY: 550 pounds. WEIGHT: 90 pounds....[More Information]
    
    
19. PORTA-DECK 6 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Deck 6 is a portable and/or semi permanent ramp for vans, steps, and curbs up to 24 inches in height. The ramp is made of heavy-duty aluminum, with aluminum side rails and an aluminum deck with a slip-resistant surface. The unit has a 2-section construction. Each ramp has end plates with vinyl pads for traction. A safety pin for securing the ramp is included. CAPACITY: 550 pounds. DIMENSIONS: 6 feet long. WEIGHT: ...[More Information]
    
    
20. PORTA-RAMP 5 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Ramp 5 is a set of 2 lightweight, folding tracks designed for use with four-wheeled wheelchairs. The tracks are constructed of three telescoping sections. The sections interlock for full extension, and have a nonslip finish with slip-resistant vinyl pads. A nylon carrying pouch is included so the tracks can be carried on the handles of the wheelchair. CAPACITY: Will hold up to 350 pounds. DIMENSIONS: The track sec...[More Information]
    
    
21. PORTA-RAMP 6 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Porta-Ramp 6 is a set of 2 folding, portable tracks with telescoping sections. The sections interlock and feature a nonslip finish with slip-resistant vinyl pads. CAPACITY: Holds up to 350 pounds. DIMENSIONS: Each track has 40-inch sections and extend up to 6 feet. WEIGHT: Each track is 8 pounds....[More Information]
    
    
22. PORTA-RAMP 8 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Ramp 8 is a set of 2 portable tracks constructed of three telescoping interlocking sections. One of the tracks is an adjustable center leg. All tracks have a nonslip finish with slip resistant vinyl pads. CAPACITY: The ramp will hold up to 350 pounds. DIMENSIONS: Sections are 36 inches each and extend up to 8 feet. CAPACITY: 350 pounds. WEIGHT: Each track weighs 11.5 pounds....[More Information]
    
    
23. PORTABLE ACCESS RAMP --- DISCONTINUED (Verified 10/95) RETAINED IN DATABASE FOR REFERENCE. --- The Portable Access Ramp is a fiberglass ramp for use on stairs, curbs, loading docks and other areas (up to 30 inches high) that may not be accessible to wheelchair or cane users. The ramp has an anti-skid surface. DIMENSIONS (WxL): 32 x 59 inches. WEIGHT: 25 pounds. CAPACITY: 400 pounds. COLOR: Beige....[More Information]
    
    
24. SCOOTER RAMP --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Scooter Ramp is a portable ramp that uses two telescoping, folding tracks placed parallel to one another for use as a van ramp or building ramp. The anodized aluminum channels retract for transport and storage. CAPACITY: 660 pounds. DIMENSIONS: 6 feet 1 inch length extended, 3 feet 4 inches collapsed. WEIGHT: 24 pounds....[More Information]
    
    
25. SHOWER RAMP --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Shower ramp constructed of polyethylene. Platform and ramp held together by pins which release by a pull ring. Leveling legs adjust for curb height. Platform must be sloped inward for drainage through drain holes in floor. Door opening must be at least 24 inches wide....[More Information]
    
    

Page 1 of 2    Next page »