Products are listed alphabetically.

« Previous page    Page 4 of 5    Next page »

76. PVI BARIATRIC PANEL RAMP (MODELS BPR348, BPR448, BPR548, & BPR648) The PVI Bariatric Panel Ramp, models BPR348, BPR448, BPR548, and BPR648, is a modular ramp designed for use by individuals with mobility disabilities. It has three interlocking lightweight ramp sections, and additional panels (not included) can be used to increase the width of the ramp. The welded ramp has an anti-slip high traction surface, and outside panels have curbing. It accomodates wheelchairs and scooters with various wheel configurations. A safety DVD and steel security pins are include...[More Information]
    
    
77. PVI BARIATRIC THRESHOLD RAMP (MODELS BAR1636 & BAR2436) The PVI Bariatric Threshold Ramp, models BAR1636 and BAR2436, is designed for use to make doorways accessible to people with mobility disabilities or spinal cord injuries who use wheelchairs. Made of aluminum, these ramps have an anti-slip, high traction surface, and there are holes punched in the top corners to facilitate installations. Hardware to secure the ramp to a surface is included. DIMENSIONS (LxW) 16 x 36 inches for thresholds 1.5 to 2 inches high (BAR1636); 24 x 36 inches for threshol...[More Information]
    
    
78. PVI MODULAR RAMP SYSTEM The PVI Modular Ramp System is a modular ramp deigned for use by individuals with mobility disabilities. The system can be Moved or Reconfigured, and is suitable for residential or commercial use. Made entirely of aluminum, the system is durable and weather resistant. Ramps have slip-resistant grooved aluminum floors with protective curbs and handrails. The system accommodates rises of up to 60 inches and has an adjustable slope. It can incorporate 45 degree and 90 degree turns and switchbacks. ...[More Information]
    
    
79. PVI MULTIFOLD RAMP WITH EXTENDED LIP (MODELS UTW630, UTW730, UTW830, & UTW1030) The PVI Multifold Ramp With Extended Lip, models UTW630, UTW730, UTW830, and UTW1030 (also known as the PVI Utility Ramp), is a portable van ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This folding ramp has an extended hook so that the top of the ramp clears the rear bumper. It separates into two pieces for folding and transport, and it is carried like a suitcase. The ramp has welded construction with an anti-slip, high traction surfa...[More Information]
    
    
80. QUICK RAMP KIT The Quick Ramp System is a ramp kit designed for use by a contractor or an individual to build and install a ramp system to provide access for wheelchairs and scooters. This pre-engineered kit includes aluminum ramp components and support assemblies, stainless steel fasteners, and detailed instructions that provide Americans with Disabilities Act (ADA) guidelines, handrail options, and cut lists for the required lumber....[More Information]
    
    
81. RAMP. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides access for wheelchair riders to areas that ordinarily can only be reached by steps. Diagram and suggestions for constructing a simple ramp. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 54. 1976....[More Information]
    
    
82. RAMPIT ALUMINUM RAMP The Rampit Aluminum Ramp is a portable ramp designed for semi-permanent indoor or outdoor use to provide access for individuals with lower extremity or mobility disabilities or spinal cord injury. Made from commercial grade aluminum with stainless steel nuts and bolts, the ramp is lightweight and portable and has a no-slip surface. It has an extension for attaching to a threshold or porch. This ramp also has a swiveling bevel for smooth transition to its ground lip extension. With a platform (no...[More Information]
    
    
83. RAMPS. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Ramps or portable tracks can be made using heavy duty aluminum end brackets. The extruded aluminum brackets fit on the ends of 2X8's or a custom width ramp, but the brackets must be able to fit over a 2 inch width of wood. Can be used with trucks, vans or houses. Each bracket has a 700 pound capacity (1400 pounds per set). Ramp can be up to 11 feet 7 inches in length, and up to a three foot rise. These brackets are available in hardware stores, or ...[More Information]
    
    
84. ROLL-O-RAMP WITH WHEELS (MODEL D-ROL-48) Roll-O-Ramp With Wheels, model D-ROL-48, is a portable curb ramp designed for use by individuals in wheelchairs. This ramp has wheels for portabililty. Its beveled edges create a smooth transition between the ramp and the ground or sidewalk. DIMENSIONS (LxW): 48 x 36 inches. CAPACITY: 500 pounds. WEIGHT: 97 pounds....[More Information]
    
    
85. RUBBER THRESHOLD RAMP The Rubber Threshold Ramp is an accessible threshold designed to provide wheelchair or scooter access in entryways. To provide a smooth and secure transition, the ramp is positioned against the door threshold. The rubber can be trimmed to fit the doorway, and ramps can be stacked for higher rises. DIMENSIONS (HxLxW): 1.5 x 14 x 36 inches, 2.5 x 24 x 48 inches, or 4.75 x 48 x 48 inches. CAPACITY: 850 pounds. WEIGHT: 18 pounds (1.5 inch rise), 40 pounds (2.5 inch rise), or 127 pounds (4.75 inch ri...[More Information]
    
    
86. SAFESPAN TELESCOPING RAMP (MODEL D-TR-88) The Safespan Telescoping Ramp, model D-TR-88, is a pair of telescoping tracks designed to provide access for wheelchair users. Tracks are made using a lightweight aluminum extrusion. The top surface is serrated for positive traction. Each track has one carrying handle. DIMENSIONS (LxW): 88 x 7 7/8 inches. CAPACITY: 550 pounds. WEIGHT: 65 pounds per pair....[More Information]
    
    
87. SCG SERIES MOBILITY AND EQUIPMENT LOADING RAMP (MODELS SCG-2, SCG-3, SCG-4, SCG-5 & SCG-6) The SCG Series Mobility and Equipment loading ramp, models SCG-2, SCG-3, SCG-4, SCG-5 and SCG-6, is a portable folding ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp can be used to enable a wheelchair or scooter user to get into a vehicle or over steps. The ramp has a full width platform for stability and a built-in serrated surface for traction. The platform folds in half lengthwise for storage, and models SCG-3, SCG-4, SCG-5...[More Information]
    
    
88. SELF SUPPORTING ADJUSTABLE THRESHOLD RAMP (MODELS ATH1232 & ATH2432) The Self Supporting Adjustable Threshold Ramp, models ATH1232 and ATH2432, is a ramp designed for use to make doorways accessible to wheelchairs for individuals with mobility disabilities or spinal cord injury. This ramp is designed for doorways that swing out or in, and its height is adjustable to fit a range of threshold rises. The unit aligns directly against the door threshold. Made of welded aluminum, it has a slip resistant grooved surface and accommodates wheelchairs and scooters with va...[More Information]
    
    
89. SELF SUPPORTING THRESHOLD RAMP (MODELS SSTH1636-1.5, SSTH2436-2, SSTH2436-2.5 & SSTH2436-3) The Self Supporting Threshold Ramp, models SSTH1636-1.5, SSTH2436-2, SSTH2436-2.5 and SSTH2436-3, is an accessible threshold designed to provide wheelchair access for doorways to individuals with mobility disabilities or spinal cord injury. This threshold ramp can be used in doorways with doors that swing out or in. It has an anti-slip, high-traction surface, and it is made of aluminum with durable, welded construction. DIMENSIONS (LxW): 16 x 36 inches with 1.5-inch rise (model SSTH1636-1.5); ...[More Information]
    
    
90. SIMPLICITY WHEELCHAIR LIFT RAMP The Simplicity Wheelchair Lift Ramp is an exterior wheelchair lift and ramp designed for use by individuals with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury and others who use wheelchairs. When not in use, the unit acts as a ramp to facilitate entry and exit from a doorway that is 12 to 24 inches above the ground. To enter the doorway, the user wheels onto the ramp and applies the wheelchair's brakes. When the device is activated, it raises the ...[More Information]
    
    
91. SINGLE FOLD RAMP WITH CARRY BAG (MODELS STDS1093, STDS1094, STDS1095, STDS1096, & STDS1097) The Single Fold Ramp with Carry Bag, models STDS1093, STDS1094, STDS1095, STDS1096 and STDS1097, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This ramp enables the user to transition a wheelchair or scooter from one surface height to another. The unit is durable and lightweight , and it comes with a carry bag. Perforated slots keep water from collecting on the ramp. OPTIONS: Additional carrying bag. DIMENSIONS (LxW): 24 x...[More Information]
    
    
92. SINGLEFOLD RAMP (MODELS SFW230, SFW330, SFW430, SFW530, SFW630, SFW730 & SFW830) The Singlefold Ramp, models SFW230, SFW330, SFW430, SFW530, SFW630, SFW730 and SFW830, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This lightweight welded ramp folds In half, and all models except the SFW230 have a handle for carrying like a suitcase. The ramp has a full platform with an anti-slip, high traction surface that accommodates wheelchairs and scooters with a variety wheel configurations. A steel security pins and a safety DVD ar...[More Information]
    
    
93. SOLID RAMP The Solid Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over smaller elevation changes and has a rigid design for a solid feel. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 3-, 4-, 5-, 6-, and 7-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 3-foot model weighs 24 pounds, the 4-foot model weighs 32 pounds, the 5-foot model weighs 40 poun...[More Information]
    
    
94. SOLID RAMP (MODELS SL330, SL336, SL430, SL436, SL530 & SL536) The Solid Ramp, models SL330, SL336, SL430, SL436, SL530 and SL536, is a ramp designed for use by individuals with mobility disabilities or spinal cord injury. The ramp's full platform is welded and has an anti-slip, high traction surface, and accommodates wheelchairs and scooters with a variety of wheel configurations. Steel security pins and a safety DVD are included. DIMENSIONS (LxW): 36 x 30 inches (model SL330); 36 x 36 inches (SL336); 48 x 30 inches (SL430); 48 x 36 inches (SL436); 60 x 30...[More Information]
    
    
95. SOLID-FOLD RAMP The Solid-Fold Ramp is a portable ramp designed for indoor or outdoor use by individuals with mobility disabilities. This ramp creates a pathway over larger elevation changes and offers width-wise folding for ease in transportation. The surface has a unique hole pattern for traction and drainage. DIMENSIONS: Available in 7-, 8-, 9-, 10-, and 12-foot lengths. All models are 36 inches wide. CAPACITY: 700 pounds. WEIGHT: The 7-foot model weighs 64 pounds, the 8-foot model weighs 72 pounds, the 9-fo...[More Information]
    
    
96. STANDARD THRESHOLD RAMP (MODELS THR832, TH1032, TH1232, TH1632, TH1636, TH2432 & TH2436) The Standard Threshold Ramp, models THR832, TH1032, TH1232, TH1632, TH1636, TH2432 and TH2436, is a threshold ramp designed to make doorways accessible to wheelchairs for individuals with lower extremity or mobility disabilities or spinal cord injury. The ramp has holes punched in its top corners so it can be secured to the surface of the doorway using hardware that is included with the ramp. The unit is made of lightweight, durable aluminum with an anti-slip, high traction surface. DIMENSIONS (...[More Information]
    
    
97. STEPLESS EASYFOLD PRO RAMP (MODELS 30080-095, 30080-120, 30080-150, 30080-180 & 30080-210) The Stepless EasyFold Pro Ramp, models 30080-095, 30080-120, 30080-150, 30080-180 and 30080-210, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rollin...[More Information]
    
    
98. STEPLESS EASYFOLD PRO3 RAMP (MODEL 30080-165) The Stepless EasyFold Pro3 Ramp, model 30080-165, is a portable ramp designed to provide wheelchair or scooter access for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The ramp can be folded lengthwise into thirds for transport and storage. The ramp is made of anodized aluminum with a skid resistant surface and stainless steel brackets. It also has curbs on both sides to prevent the user from rolling off the side of each t...[More Information]
    
    
99. STEPLESS EASYFOLD RAMP (MODELS 30060-090, 30060-120, 30060-150 & 30060-180) The Stepless EasyFold Ramp, models 30060-090, 30060-120, 30060-150 and 30060-180, is a portable ramp designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. This single-fold ramp can be folded and carried with the attached carrying handles or stored. When unfolded, the ramp provides a solid non-skid surface. The ramp can be positioned and removed as needed to overcome minor height differences. Models 30060-1...[More Information]
    
    
100. STEPLESS EASYFOLD TELESCOPIC RAMP (MODELS 30070-180, 30070-210, 30070-240, & 30070-300) The Stepless EasyFold Telescopic Ramp, models 30070-180, 30070-210, 30070-240 and 30070-300 is a portable ramp and van ramp designed to provide wheelchair or scooter access to structures and vans for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and scooters. The length of the ramp is adjustable so it can be used to provide access between two surfaces with a variety of height differences. The telescopic function prevents finger pinching...[More Information]
     
     

« Previous page    Page 4 of 5    Next page »