Doorbell Signal
Products are listed alphabetically.
Page 1 of 1
-
ADA 120 AUDIO VISUAL ALERT SYSTEM
--- DISCONTINUED. (Verified 11/2006) RETAINED IN DATABASE FOR REFERENCE. --- The ADA 120 Audio Visual Alert System is a flashing light and enhanced audible doorbell signal. This unit was developed to convert any existing apartment house intercom system into one which will assist people with hearing disabilities. The unit is activated when a person pushes an apartment button on the entrance panel. Inside the apartment, the system's strobe light will flash for up to three minutes, and a buzzer (up...[More Information]
-
ALERT PLUS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Alert Plus is an all-in-one unit multiple signal system for persons with hearing disabilities. The unit is equipped with a strobe light, bed shaker, and loud audio buzzer options to alert an individual with a hearing disability to smoke detector alarm activation, telephone ringing, door knocking, and alarm clock sounding. Plugs into wall socket....[More Information]
-
BUZABELL (MODEL 404) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Doorbell signal, replaces present doorbell chime and produces an 87 decibel combination bell, buzzer when the doorbell button is pressed. Requires only a screwdriver to install. Measures 3 by 5.25 by 1 inch. Aluminum case. Uses a 6 to 8 volt AC doorbell transformer. May be installed so that front and back doors may be distinguished....[More Information]
-
DIALCOMM AUTODIAL ENTRY SYSTEM --- DISCONTINUED. (Verified 12/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Dialcomm Autodial Entry System is door entry and call system designed for retrofitting an existing building entry buzzer panel without having to install a new console or re-finish a wall. Dialcomm is installed in the wall behind the existing buzzer panel and allows existing buttons to connect the caller with the apartment occupant by automatically dialing the occupant's telephone number. The occupant can then have a...[More Information]
-
DOOR MONITOR --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Door Monitor is a device that notifies the user that his doorbell or apartment intercom has been activated by flashing a household lamp. The Door Monitor connects to the user's doorbell or buzzer (instructions provided), and a lamp is plugged into the Door Monitor. Different flashing patterns can be used for different doors. The Door Monitor can also be set to flash the same lamp off instead of on. A "page" button on the device allows the...[More Information]
-
DOORBELL AND TELEPHONE TRANSMITTER (MODEL DDT7T) --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Telephone and doorbell signal, remote control receiver has outlet and 2- way switch. Lamp or light bulb plugs into unit, light flashes on receiving signal....[More Information]
-
DOORBELL BUZZER SYSTEM (MODEL 402) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Doorbell signal. Transmits a signal from the doorbell to a loud (85 decibels) remote buzzer that can be plugged in anywhere in the house. To install attach the included wire from the transmitter to present doorbell chime. Plug transmitter into a 110 volt wall outlet. Buzzer plugs into desired outlet. Transmitter measures 3.5 by 2.5 by 2.5 inches; buzzer measures 3.5 by 2.5 by 2.5 inches. 18 foot doorbell wire. Power sources are 110 volt A...[More Information]
-
DOORBELL RING SIGNALER (MODEL 400) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Doorbell signal, transmits a signal to a remote receiver that flashes a light each time the doorbell button is pushed. Signaler connects to present doorbell chime and into 110 volt AC outlet. Receiver plugs into outlet anywhere in the house; lamp plugs into receiver. System includes 3.5 by 2.5 by 2.5 inch white plastic signaler, 2.5 by 4 by 1.75 white plastic receiver, 18 foot doorbell wire....[More Information]
-
DOORBELL TRANSMITTER (MODEL T7A) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Doorbell Transmitter, Model T7A, is a visual alerting signal with built-in receptacle for the visually impaired. A doorbell button and 18 foot clear wire is provided. To install hook up one end of wire to doorbell button and other end to doorbell transmitter. When doorbell is pressed once, a light will flash 6 to 8 times. The transmitter can also be hooked up to an existing doorbell chime, so that chimes will ring al...[More Information]
-
DOORBELL/TELEPHONE TRANSMITTER (MODEL DDT7) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Doorbell/Transmitter, Model DDT7, is a combination visual alerting signal system for the visually impaired. The system includes a doorbell button and a 18 feet of wire, when the doorbell is depressed or the telephone ring the transmitter emits a signal to the remote receiver. The lamp plugged into switched receptacle will flash. Separate flash codes exist for telephone and doorbell. A bed vibrator may also be plugged...[More Information]
-
EXTRA VOLUME DOORBELL (MODEL 412) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Doorbell signal. Replaces present doorbell chime. Emits 93 decibel ring. Requires only a screwdriver to install. Powered by 6 to 8 volt AC doorbell transformer. Measures 8 by 6 by 1.5 inches....[More Information]
-
GENIE TRANSMITTER AND RECEIVER (GTR 4) --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Wireless and soundless standard or portable doorbell and multipurpose pager. For travel or at home. Long range transmission allows use indoor or outside. Average transmission and reception range: 300 to 500 feet. 9 volt battery. $54.50 for Genie extra receiver, GR-4 and $37.50 for genie extra transmitter, GT-4....[More Information]
-
KNOCK LIGHT --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Knock Light is a doorbell signal for persons with hearing disabilities that attaches to the back of the door with hook and loop fastening tape. When someone knocks on the door, the incandescent bulb flashes. No wires are used, and a doorbell switch is not needed. This portable, self-contained sensor and light may be used in the home to eliminate missed visitors or deliveries, or in hotels and bathrooms to maintain s...[More Information]
-
MASTER RING INDICATOR WITH DOORBELL OPTION --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- Operates same as telephone master ring indicator, but with long flash for phone and short flash for doorbell. Transmitter has suction attachment for telephone and wire connects to doorbell. Wiring options to leave chime connected or disconnected. Remote receivers available for other sections of house....[More Information]
-
OPTICEAR TRI FLASH --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- Signal system. Portable unit with a coil and a microphone sensitive to pushbutton doorbells, intercom systems, telephone rings, burglar alarms, door chimes and door knocks. For apartments and houses. An ordinary lamp is plugged into the device. The coil can be attached to the doorbell box, telephone or apartment intercom. The microphone can be used for doorknocks. When activated, will flash lamp. Up to 600 watts can be ...[More Information]
-
PHONE-TTY BABY CRY SIGNALLER (MODEL BC-1W) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Phone-TTY Baby Cry Signaller (model BC-1W) is a sound signaler designed to alert the hearing impaired user of a crying baby. The unit activates a lamp or vibrator that is plugged into it. The unit works whether or not the lamp is already on. The signaller features a highly sensitive, built in microphone that picks up sound up to 20 feet away. Microphone also has a sensitivity adjustment to monitor desired sou...[More Information]
-
PHONE-TTY DOORBELL SIGNAL (MODEL DS-2W) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Phone-TTY (model DS-2W) is a doorbell signal designed for the hearing impaired. A light flashes on/off for 8 or 16 seconds to indicate the front doorbell, and a steady light comes on for 8 or 12 seconds for the back doorbell. The signal features a built-in wireless transmitter for use with wireless receivers. Use with a lamp or bulb that is plugged into transmitter. The unit must be wired to the doorbell, however ...[More Information]
-
PORTABLE DOORBELL ACCESSORY ATTACHMENT (MODEL 2333) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Accessory attachment for their Electro Alarm Clock Kit (see separate entry). Portable unit connects into the rear of the clock with other end of cable to button at front door. When the button is pressed, the pillow vibrator is activated. Unit contains its own power supply (2 penlite cells, MN1500 or E91). Batteries not included....[More Information]
-
SOUND LAMP, ONE MICROPHONE (MODEL 2139) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Sound lamp automatically converts sound into light. Used to indicate doorbell and telephone ring, knocking on doors, or smoke alarm. Operates on standard house current. Variable sensitivity control may be adjusted to various sounds. Dimensions, eight inch oval white globe on 4.5 inch base....[More Information]
-
SUPER SIGNAL SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Signal system using digital radio signals and advanced computer technology for hearing impaired. Can prevent interference from neighbors (4 different settings) and works from any place in your home. Requires purchasing of separate transmitters (depending upon what you want monitored); one receiver that sends messages about the sounds through the home wiring to all Lamp Modules (purchase of lamp modules depending upon how many rooms you ne...[More Information]
-
TELEPHONE SIGNAL OR DOORBELL SIGNAL OR BABY CRY SIGNAL --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Light signalling device with jack for microphone for phone pickup and receptacle for signal light. 110 volt. Sensitivity control for baby cry and phone pickup. Several models: baby cry sound pickup, telephone magnetic pickup, door bell pickup and sick room call....[More Information]
-
VAS VISUAL ALERT SYSTEM --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- Portable electronic aid to signal person with hearing impairment for ringing telephone, a knock on the door, or a smoke detector which is ringing. A bright strobelight is activated, and individual LED lights identify which event occurred. Button to rset after it is activated. VAS is in a carrying case (standard brief case) and includes a visual alert control center, door knock transmitter, telephone amplfier and strobe li...[More Information]
-
WIRELESS DOOR CHIME (MODEL 49227) --- DISCONTINUED. (Verified 09/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Wireless Door Chime is a doorbell amplifier designed to signal the ringing of the doorbell for individuals who are deaf or hard of hearing. This systems extends the chime of your existing doorbell up to 50 feet. Set the system up by placing the transmitter near the door and attaching the receiver to any wall. POWER: One nine volt battery (not included)....[More Information]
Page 1 of 1

