Products are listed alphabetically.

Page 1 of 1

1. AIR PAD SWITCH --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Air Pad Switch is a single switch activated by squeezing or pressing on a rubber bulb. Pressing the bulb sends air through a tube, which activates the switch. The bulb is connected to the switch by an eight foot tube. Available in either a "normally on" or "normally off" mode. DIMENSIONS: 4.5 x 4.5 x 2.63 inches. WEIGHT: 1.25 pounds....[More Information]
   
   
2. AIR SWITCH KITS (MODEL T71814) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Air Switch Kits consist of a squeeze type switch (operated by squeezing a rubber bulb), a 9V battery operated motor with 1" shaft, and battery clips. Three types of bulbs are available: a small hand bulb (3.5" x 1. 6" diam.; $100), a large hand bulb (5.2" x 1.5" diam.; $103), and a pillow bulb (0.6" x 3.6" diam.; $119). POWER: 9 volt battery (not included)....[More Information]
   
   
3. FLEXI SWITCH (MODLE AC3138 & AC3139) --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Flexi Switch is a squeeze switch designed to develop the concept of cause and effect for indivudals with a cognitive or physical disability. It is activated by bending or squeezing the fabric covered shapes, either square or triangle. The switches are available in assorted fabrics with varying textures and patterns to enhance sensory awareness. DIMENSIONS: Shapes measure 7 inches. WARRANTY: One year limited warranty ...[More Information]
   
   
4. GRASP SWITCH --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Grasp Switch is a cylindrical switch activated by grasp pressure. The switch requires an activation pressure of approximately six ounces to trigger a response. A 1/8-inch mini-phone plug is used to connect the switch to the device or toy to be controlled. DIMENSIONS: 4.9 x 1 inch in diameter....[More Information]
   
   
5. GRASP SWITCH (MODEL 3079) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Grasp Switch, model 3079, is a squeeze switch designed to enable persons with physical disabilities to activate toys and appliances adapted for single switch use by squeezing a rubber handgrip. This switch may be used with any appliance equipped to accept a 1/8-inch plug. DIMENSIONS: The handgrip is 1 inch in diameter....[More Information]
   
   
6. HAND HELD FLEXIT --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Hand Held Flexit is a squeeze switch contained in a soft, vinyl cover designed to be bent, squeezed, or pressed to activate. POWER: Wall plug with 18 guage cord, 6 feet long with minature plug. DIMENSIONS: 2 x 5 x 3/4 inch thick....[More Information]
   
   
7. HOSPITAL HAND SWITCH (MODEL 6201) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Hospital Hand Switch, model 6201, is a squeeze switch designed for use by individuals with physical disabilities while in bed. The switch is made of vinyl and is small enough to be held in a child's hand. It is activated by the slightest pinching or pressure, and it comes with a plug. DIMENSIONS (LxWxD) The switch is 2 x 5 x 11/32 inches, and the plug is 1/8 inch. COLOR: The switch is white....[More Information]
   
   
8. PNEUMATIC SWITCH (MODEL SP 11-1) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pneumatic Switch is an air pillow that activates a pressure switch when compressed or rolled on. The pillow may be operated by touching anywhere on the surface. A rubber bulb (included) permits hand squeeze activation of the switch. The switch has an RCA-type phono jack....[More Information]
   
   
9. PRESSURE BULB SWITCH FOR SPELLER TELLER COMMUNICATOR (MODEL ST1031) --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. --- Switch is activated by squeezing or pressing on a rubber bulb. Available with large or small bulbs....[More Information]
   
   
10. SQUEEZE SWITCH (MODEL AC3023) --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Squeeze Switch is designed to develop the concept of cause and effect for indivudals with a cognitive or physical disability. The switch is made of foam covered in fabric to enhance sensory awareness. Its main function is to encourage grasping. WARRANTY: One year limited warranty on defects in materials and workmanship....[More Information]
    
    
11. SQUEEZE SWITCHES - SINGLE & DUAL --- DISCONTINUED. (Verified 12/94) RETAINED IN DATABASE FOR REFERENCE. --- Squeeze Switches are pressure sensitive single switches activated by grasping a padded handle. The Single (Model 105; $23.00) requires only one hand to activate; the Dual (Model 109; $35.00) requires two hands. DIMENSIONS: 10 x 2.5 x 1 inch. WEIGHT: 2 pounds....[More Information]
    
    
12. SQUEEZE TYPE SWITCHES (MODEL T71812) --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Squeeze Type Switches are activated by the flow of air out of an air bellows when it is squeezed. A tube from the bellows leads to the switch housing, which has two output jacks: one with normally open contacts, one with normally closed contacts. Three types are available: a small hand bulb (3.5" x 1.6" diam.; $68), a large hand bulb (5.2" x 1.5" diam.; $70), and a pillow (flat disk) bulb (0.6" x 3.6" diam.; $85)....[More Information]
    
    

Page 1 of 1