Products are listed alphabetically.

Page 1 of 2    Next page »

1. 4-PNEUMATIC SWITCH (MODEL CM-17) 4-Pneumatic Switch is a switching unit that accepts input from one sip- and-puff tube. Different combinations of light and heavy sip and puff serve to activate each of four switches. Any desired tube may be used; one is available as well from the manufacturer (extra). Switch activation is silent. DIMENSIONS: 2.5 x 4.75 x 1.75 inches. WEIGHT: 7 ounces....[More Information]
   
   
2. 90 DEGREE WHISPER-LITE SWINGAWAY SIP-N-PUFF (MODEL 32555) The 90 Degree Swingaway Sip-N-Puff System, model 32555, is a pneumatic switch designed to enable people with severe physical disabilities to propel powered wheelchairs using breath control. The system can be placed in a fixed position or installed as a swingaway unit by using the Pinned Split Collar with the Notched Step Collar. A plastic-coated gooseneck tube swings to the side and out of the user's way for better access when entering or exiting the chair. The system features a swing-away block...[More Information]
   
   
3. AIR BELLOW (MODEL B141BA) Round pneumatic bellows connected to plastic tubing which joins pressure switch. Pressure on bellows remotely activates electrical pressure switch located in appliance. Water, dust and shock proof. Pressure switch not included. Bellow can be connected to momentary, on/ off or sequencing air switches so electrical equipment can be turned on/ off or sequenced with no danger of shock....[More Information]
   
   
4. AIR CUSHION SWITCH (MODEL 660, 660-8) The Air Cushion Switch, model 660 and 660-8, is a flat pneumatic cushion switch designed for individuals with limited strength and mobility. Light pressure on the bellows operates the switch until pressure is released. Momentary pressure will cause momentary output. It will operate all adapted appliances. Model 660 is standard with 0.25 inch jack. Model 660-8 has a 1/8 inch jack. DIMENSIONS: Diameter is 3.5 inches....[More Information]
   
   
5. AIR SWITCH. This single switch is activated by a change in air pressure in a tube connected to it. It can be activated with either a sip or a puff. DIMENSIONS: 2 x 1.5 inches....[More Information]
   
   
6. AIRVOTER (MODEL AC-0300-AV1V2) The AirVoter, model AC-0300-AV1V2, is a pneumatic (sip and puff) voting machine control designed for use by voters with upper extremity disabilities or amputation, neurological or severe physical disabilities, spinal cord injury, or cerebral palsy. This system allows the user to vote independently on an accessible voting machine through sips or puffs on a disposable mouthpiece in time with visible or headphone-audible cues. After a voter has completed a ballot, the mouthpiece is discarded and th...[More Information]
   
   
7. ASL PNEUMATIC SWITCH - SIP N PUFF (MODEL ASL308) The ASL Pneumatic Switch - Sip & Puff, model ASL308, is a pneumatic switch designed for use by individuals with cerebral palsy, neurological disabilities, upper extremity amputation, spinal cord injury, or upper extremity disabilities. This switch has two mono jack outputs that allow breath control of two separate functions. OPTIONS: ASL 607 series of sip n puff tube mounts....[More Information]
   
   
8. BREATH ACTUATOR (MODEL 3365) A 4-direction, multiple switch actuator used to convert varying amounts of breath suction and pressure (sip and puff) into the directional commands required by the Multimode Interface for mode selction and oepration. The Model 2422 Breath Tube Kit is used to provide a means of sending these sips and puffs to the Breath Actuator....[More Information]
   
   
9. Blow Switch. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch activated by blowing on an index card attached to a battery device, intended to help a child develop breath control and blowing skills. This switch is made with a metal bandaid box, 3/16 inch wood dowel, two large paper clips, 12 inches of 24 gauge stranded wire, four inches of 2 conductor 22 gauge stranded wire and two index cards. Provides instructions and diagrams on cutting slots and holes in the box, soldering wire to the paper clips, a...[More Information]
   
   
10. COOPER RAND PUFF CONTROLLED TONE GENERATOR ATTACHMENT Puff controlled tone generator attachment for the Cooper-Rand electronic speech aid (see separate entry). The pneumatic switch is mounted to a headband with the tube curving around the side of the head to the mouth. Includes 40 inches of cord and used existing pulse generator....[More Information]
    
    
11. DOUBLE PUFF SWITCH (MODEL 985, 985-8) The Double Puff Switch, model 985 and 985-8, is a pneumatic control switch for use with toys and devices for individuals who have physical disabilities. This double closure electromechanical switch is activated by puffing slightly on the tube to create the first switch closure. Further puffing will continue the first switch closure while providing a second closure. The switch is mounted on a 13" gooseneck and can be attached to most flat or tubular surfaces with a mounting clamp. It comes with ...[More Information]
    
    
12. DOUBLE SIP SWITCH (MODEL 980) The Double Sip Switch, model 980 nad 980-8, is a double closure pneumatic control switch for use with toys and devices for individuals with physical disabilities. It is activated by sipping in slightly on the tube to create the first switch closure. Further sipping will continue the first switch closure while providing second closure. The switch is mounted on a 13-inch gooseneck and can be attached to most flat or tubular surfaces with a mounting clamp....[More Information]
    
    
13. DUAL PNEUMATIC SWITCH (MODEL CM-14) Dual Pneumatic Switch is a switching unit activated by sipping or puffing on a tube. Each of the two actions activates a different switch. Any chosen tube may be used; one is available as well from the manufacturer (extra). DIMENSIONS: 2.5 x 4.75 x 1.75 inches. WEIGHT: 7 ounces....[More Information]
    
    
14. FOOT CONTROL BELLOWS (MODEL B621A) Foot operated pneumatic bellows connected to plastic tubing which joins remote electrical pressure switch located in appliance. Water, dust and shockproof. Air pressure switch not included. Bellow can be connected to momentary, on/off or sequencing air switches so electrical equipment can be turned on/off or sequenced with no danger of shock....[More Information]
    
    
15. GRIP AND PUFF SWITCH (MODEL 700, 700-X) The Grip and Puff Switch is both a squeeze switch and a pneumatic puff switch designed for individuals with physical disabilities. The vinyl grip, a rubber cylindrical air bellows is connected by a tube to a switching unit. Grasping the cylinder and exerting slight pressure activates the switching unit, which functions as a regular switch. The grip can also be removed and used as a puff switch. This product comes with a standard 0.25 inch jack and plug and can be ordered with a 1/8 inch jack and...[More Information]
    
    
16. GRIP SWITCH The Grip Switch is a squeeze switch designed for use by individuals with upper extremity disabilities. This pneumatic switch activates with a slight squeezing pressure on the grip (five grips in different sizes are included to accommodate growth, change in ability, or multiple users). The switch can be used with any switch-adapted toy or appliance equipped with a 1/8th-inch jack. DIMENSIONS: All grips are four inches long. They range in diameter from 3/8 inch to .75 inch. COLOR: The grips are fi...[More Information]
    
    
17. INTEGRASWITCH The IntegraSwitch is a pneumatic switch designed for use by individuals with neurological, upper extremity, or severe physical disabilities or spinal cord injury. This control unit can be used to operate environment control systems, communication devices, adapted toys, software programs or emergency call systems. Its mouthpiece is exchangeable and latex-free, and can be cleaned in a dishwasher. The unit has two exits for dual function (one exit for sipping and one exit for puffing). Sipping and ...[More Information]
    
    
18. LATCHING PNEUMATIC SWITCH HD The HD (heavy duty) latching pneumatic switch plugs into a 3-pin grounded power receptacle, allowing control of 120 volt appliances up to 10 amps. The air cushion actuator is operated by sips on the tube and may be mounted with screws, velcro or tape. the Actuator and 6 feet of connector tubing are not in direct contact with electrical power. Can be used in damp areas and washed. Those with sufficient breath- power may prefer a puff version of the switch, available on request. Can be used to tur...[More Information]
    
    
19. LATCHING PUFF SWITCH LD The LD (light duty) Latching Puff Switch is rated for 24 volts up to 3 amps. It latches mechanically to an on or off position. No external power, batteries or adapter boxes are needed to maintain the latching action. A gentle puff of mouth air will set the switch to the on position. Another gentle puff of air will set the switch to off. Comes with a 40 inch detachable cord with a 1/8 inch mini plug. Supported by a light weight over-the-head band. Weight of the switch and headband is 3 ounces. Ca...[More Information]
    
    
20. LIFEBREATH SWITCH (MODEL 1062) The LifeBreath Switch, model 1062, is a pneumatic switch designed for use by individuals with upper extremity and other physical disabilities. Gently blowing into the switch activates attached external devices. The switch is attached to a gooseneck with a universal clamp. This switch operates in latch, momentary, or timer mode. The timer adjusts from zero to two minutes. POWER: Uses nine-volt direct current. DIMENSIONS: The gooseneck is 19 inches long....[More Information]
    
    
21. LOW PRESSURE SIP N' PUFF SWITCH The Low Pressure Sip N’ Puff Switch is a pneumatic switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This system allows the user to switch devices, including auxillary communication devices, on and off with a sip or puff. The switch comes with mounting hardware....[More Information]
    
    
22. OMNITILT SEAT MOTOR CONTROLLER The Omnitilt Seat Motor Controller is a pneumatic switch designed for use by individuals who use wheelchairs and are at risk of pressure sores. This device automatically changes seat positions every set interval to relieve pressure. It automatically levels the chair seat by changes in terrain, and can also be set to manual mode so the user can set permanent seat positions....[More Information]
    
    
23. PLATE SWITCH The Plate Switch is a pressure switch designed to create computer access for individuals with a physical disability. This general purpose switch requires three ounces of pressure to activate and can be used with a chin or head mount. A "click" sound provides auditory feedback. Rubber feet make the switch ideal for desktop use. The switch comes with a black 69 inch cable and 3.5 millimeter plugs at either end. DIMENSIONS: Switch measures 3-7/8 x 2 x 1-1/8 inches. Jack size is 3.5 millimeters. COL...[More Information]
    
    
24. PLUMP N' PUFF SWITCH (MODEL 665) The Plump N' Puff Switch, model 665, is a pneumatic touch switch designed for use by individuals with upper extremity disabilities.This large, dome-shaped switch has a soft, puffy feel and can be placed on a table or mounted on the Magic Arm System (see separate entry). DIMENSIONS: The hemisphere of the switch is 6 inches in diameter,...[More Information]
    
    
25. PNEUMATIC SWITCH Single switch activated by sipping or puffing into a tube. Tube is attaches to housing where actual switch is located. Gooseneck length 13 inches. Plastic housing. Switch dimensions: 4 1/2 by 2 1/2 by 1 1/2 inches. Used with Hasten system 500-911....[More Information]
    
    

Page 1 of 2    Next page »