Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Switch Mounting Hardware

Products are listed alphabetically.

Page 1 of 1

  1. ACCESS KIT SWITCH AND MOUNTING ASSESSMENT KIT Picture of ACCESS KIT SWITCH AND MOUNTING ASSESSMENT KIT --- DISCONTINUED. (Verified 1/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Access Kit Switch and Mounting Assessment Kit is a control switch assessment system including a variety of switch mounting hardware and an assortment of switches designed for use by individuals with upper extremity disabilities. This set includes a Yellow Accessible Switch, a Happy Face Buddy Button, a Red Big Buddy Button, a Grasp Switch, a Micro Light Switch, a Mini Cup Switch, a Pillow Switch, a Green Plate Switch...[More Information]

  2. ADJUSTABLE ARM MOUNTING SYSTEM --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. ---The Adjustable Arm Mounting System is a multi-angle switch mounting device that attaches to either side of a wheelchair for optimal positioning and secure installation. Its slim extension brackets easily adjust to any configuration up to 21 inches. The mount consists of two 6-inch extensions, and two 4-inch extensions, and a 1-inch extension, all of which can be interchanged, allowing the flexibility of adapting to multi...[More Information]

  3. CHIN MOUNT (MODELS A90 & A91) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Mounting system to allow any switch to be used as a chin switch. Device is attached to user's chest with 4 velcro straps. Switch is attached to mounting system. Adjustment knobs for up/down and forward/back. Adult or child sizes....[More Information]

  4. COLLAR WITH HARDWARE (MODEL CHC-H) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Collar with Hardware, model CHC-H, is a switch mounting device with hardware designed for mounting switches and controllers in close, precise relation to the face and chin for individuals with severe physical disabilities. The collar is pre-formed made of thermoplastic Kydex with a velcro closure at back of collar. The manufacturer recommends custom molding to fit for comfort, function and to maintain skin integrity. ...[More Information]

  5. E-Z LOCK MIDLINE SWING-AWAY ASSEMBLY (MODEL 32683) --- DISCONTINUED. (Verified 5/94) RETAINED IN DATABASE FOR REFERENCE. --- The E-Z Lock Midline Swing-Away Assembly, model 32683, is a control switch accessory for mounting hardware designed to position and secure a powered wheelchair controller in the optimal position for the user. The unit includes a Swing-Away Block with a cam locking system which permits an adapter bar (not included) to be swung away or locked to the side by turning the cam lever 180 degrees and rotating the block. The Assemb...[More Information]

  6. E-Z LOCK MIDLINE SWING-AWAY SYSTEM (MODEL 32686) --- DISCONTINUED. (Verified 5/94) RETAINED IN DATABASE FOR REFERENCE. --- The E-Z Lock Midline Swing-Away System, model 32686, is a control switch accessory for mounting hardware designed to secure and position powered wheelchair controls at the optimal position for the user. The System features a Swing-Away block and a solid, chromed metal adapter bar that moves laterally through the solid, chromed metal extension bar. The Swing-Away Block includes a cam locking system to positively lock the ad...[More Information]

  7. FIXED ATTACHMENTS (MODELS 2055, 2073, 2074, 2057, & 1630) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Fixed Attachments are switch mounting hardware designed to aid in attaching switches to wheelchairs. These calmps can be used on wheelchair frames and bedframes. DIMENSIONS: Model 2055 is 7/8 to 0.25 inch. Model 2073 is 7/8 to 3/8 inch. Model 2074 is 7/8 to 0.5 inch. Model 2057 is 7/8 to 5/8 inch. Model 1630 is 7/8 to 0.75 inch. Custom sizes are available....[More Information]

  8. HANDI-TAK Picture of HANDI-TAK --- DISCONTINUED. (Verified 08/2009) RETAINED IN DATABASE FOR REFERENCE. --- Handi-Tak is a surface anchor designed to secure switches and other lightweight items to flat surfaces. This adhesive is sticky, moldable, and reusable....[More Information]

  9. LOCKLINE CATERPILAR TUBING (MODEL 2020) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Lockline Caterpilar Tubing, model 2020, is switch mounting hardware designed to aid in attaching switches to wheelchairs or workstations. DIMENSIONS: This gooseneck-style tubing is sold in 12-inch lengths....[More Information]

  10. MOUNTING ASSESSMENT KIT (MODEL 5992) --- DISCONTINUED. (Verified 2/2005) REPACED BY SWITCH MOUNTING ASSESSMENT KIT, MODEL 65992. RETAINED IN DATABASE FOR REFERENCE. --- The Mounting Assessment Kit, model 5992, is a control switch mounting hardware assessment kit designed for evaluating individuals who use switches. It consists of a basic assortment of all TASH mounting hardware in a carrying case including: universal swivel clamp, wheelchair swivel clamp, universal table mount, luxo arm, gooseneck (13 and 19 inch), bushing, pinch c...[More Information]

  11. MOUNTING SYSTEMS (MODELS MS-1 TO MS-11) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Mounting Systems are switch mounting hardware systems designed for mounting a variety of Zygo products, communication products, and other assistive technology to wheelchairs, tables, counters, etc....[More Information]

  12. QUICK DISCONNECT RODS (MODEL 1600) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- Quick Disconnect Rods, model 1600, are switch mounting hardware that enable an entire headswich mounting assembly on a wheelchair to be removed and reinstalled without repositioning. With two units, the rods enable one assembly to be quickly transferred to a second wheelchair. DIMENSIONS: The rods are 0.25-inch in diameter....[More Information]

  13. SIP-N-PUFF 16 & 24 SYSTEM (MODELS 32670 & 32671) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Stationary Sip-N-Puff Tube System is a pneumatic switch and switch mounting hardware designed for use by people who propell their wheelchairs using a sip-n-puff switch. The tubing is plugged into the control switch (switch not included). The system includes a clamp for the wheelchair frame (7/8 inch tubing), flexible gooseneck with air tubing inside, 2 saliva traps, and a mouthpiece hole. DIMENSIONS: Available with 1...[More Information]

  14. SIP-N-PUFF, 16 SWING-AWAY SYSTEM (MODEL 32674) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Sip-N-Puff, 16 Swing-away System is switch mounting hardware designed for use by people who propell wheelchairs by means of a sip-n-puff switch. This system allows the sip-n-puff straw to be moved out of the way. The pre-adjusted sip-n-puff tube can swing to the side for easier access into and out of wheelchair with no re-adjustment of the gooseneck necessary. The unit includes thru-connections for sip-n-puff tubing,...[More Information]

  15. SWITCH MOUNTING KIT & WHEELCHAIR SWITCH MOUNTING KIT (MODELS SMT, SMW) --- DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE. --- The Switch Mounting Kit and the Wheelchair Switch Mouting Kit, models SMT and SMW, are switch mounting hardware designed with internally reinforced goosenecks for individuals with physical disabilities who use switches. The Switch Mounting Kit has a gooseneck attached to a base clamp and locking ball swivel. It can be mounted using a clamp or more securely using screws. The Wheelchair Switch mounting Kit is the same excep...[More Information]

  16. SWITCH MOUNTING KIT (MODEL A95) --- DISCONTINUED. (Verified 10/2000) RETAINED IN DATABASE FOR REFERENCE. --- The Switch Mounting Kit, model A95, is switch mounting hardware designed for customizing switch placement. The kit includes dual lock, 3 wheelchair clamps, 6 aluminum rods, 2 adapters, 2 thumb screws, a 13-inch flexible gooseneck with pushbutton disconnect, a right angle tube, a mounting plate, and tools needed for set up. Complete instructions are included for creating permanent mounts for the individual user....[More Information]

  17. SWIVEL INTERCONNECTORS (MODELS 2034, 2035, & 2036) --- DISCONTINUED. (Verified 7/2004) RETAINED IN DATABASE FOR REFERENCE. --- The Swivel Interconnectors are switch mounting hardware designed to aid in positioning switches on wheelchairs and workstations. The swivels connect to mounting rods and allow the adjustment of both the length and angular relationship of two mounting rods. Model 2034 connects two 0.25-inch diameter rods. Model 2035 connects two 3/8-inch diameter rods. Model 2036 connects two 0.5-inch diameter rods....[More Information]

  18. TABLE MOUNTING PACKAGE (MODEL 3081) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Table Mounting Package, model 3081, is switch mounting hardware designed for use by individuals with severe physical disabilities, spinal cord injury, and upper extremity disabilities. It can be used for attaching Flex or Leaf switches (not included; see separate entries) to tables or table-like surfaces. The preassembled kit includes a Universal swivel clamp, 16-inch straight tube, and a table clamp....[More Information]

  19. TRACKBALL MOUNTING KIT --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The track ball Mounting Kit is a universal switch mounting system for a track ball or joystick for use by persons without hand function but good head movement. The kit consists of a modified tripod and mounting hardware which allows attachment of the tripod on a board or tabletop. The tripod angle, height and distance from the computer is fully adjustable forming a rigid support for the switch. The track ball, joystick ...[More Information]

  20. WHEELCHAIR MOUNTING PACKAGE (MODEL 3080) --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Wheelchair Mounting Package, model 3080, is switch mounting hardware designed for use by individuals with spinal cord injury, upper extremity disabilities, and severe physical disabilities. It can be used for attaching Flex or Leaf switches (not included; see separate entries) to wheelchair push handles or armrests. The preassembled mounting package includes a Universal swivel clamp, 16-inch straight tube, and a whe...[More Information]

Page 1 of 1

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.