Products are listed alphabetically.

Page 1 of 3    Next page »

1. 2-WAY LIFT CHAIR (MODEL 70556) The 2-Way Lift Chair, model 70556, is a seat lift chair and recliner designed for use by individuals with mobility disabilities. This two-position chair features quiet and smooth lift and recline. With a touch of a button the chair lifts the user up. A built-in emergency battery back-up allows the chair to return to the sitting position in the event of a power outage. POWER: Uses household current; the backup uses 9-volt batteries (not included). DIMENSIONS (HxW): The chair is 43 x 29 inches. Th...[More Information]
   
   
2. BELLAIRE WITH LUMBAR SUPPORT The Bellaire with Lumbar Support is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic Wear-Dated fabric, this chair also features Scotchgard fabric protection, dual magazine pockets, adjustable lumbar support, tri...[More Information]
   
   
3. CARE CHAIR 1, 2, & 3 Upholstered chair with powered elevating seat. Three models; straight, semi reclining, and fully reclining. Operated by cord mounted rocker switch, with optional toggle switch. Assorted colors and patterns. Soil resistant fabrics available. U.L. listed electrical components and 14 gauge steel lift mechanism. 2 year warranty on lift and recliner mechanisms, 1 year on motor....[More Information]
   
   
4. COMFORT LIFT CHAIR (MODEL 300) Adjustable seat lift recliner. Adjustable lift angles, from 30 to 180 degrees or flat position in 5 increments. Full recline with 1 1/2 inch placement from wall. Complete chair rises via gear driven motor. Welded steel tube lift mechanism is plated. Uses motor-driven linear actuator with clutch and thermal protection. 110 Volt, 2.4 Amp, standard household current. 100% Dupont nylon fabric with 3M Scotch Guard Protection, foam filled. Solid hardwood frame. Control may be hand held or mounted on r...[More Information]
   
   
5. COMFORT PLUS, COMFORT PLUS II (MODEL 6960) Seat lift recliner chair. Fully powered back; removable back for cleaning, portability; choice of upholstery; back reclines within 8 inches from wall; contoured back; arms elevate with seat; armrest covers; 5.5 inch thick seat made of multiply layered foam; ottoman extends prior to back reclining to allow elevation of legs while sitting upright; storage pouch; side mounted switch for powered recline and lift. Overall height 41 inches, overall width 30 inches, seat width 20 inches, seat depth 21 ...[More Information]
   
   
6. COUNTRY LIFT CHAIR (MODEL TMR-400) The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps...[More Information]
   
   
7. EASY COMFORT LIFT CHAIR (MODEL LC200) The Easy Comfort Lift Chair, model LC200, is a seat lift and recliner chair designed for use by individuals with physical or mobility disabilities. The chair has a two-position all-electric lift and reclining mechanism with a button control, which either tilts the user back to rest, or rises to help the user stand. The chair has a hardwood frame, a heavy-duty steel lift mechanism, and a wide seat with soft fabric. POWER: Uses household current, with integrated emergency battery backup. CAPACITY:...[More Information]
   
   
8. ELEVATING CHAIR --- CUSTOM ADAPTATION --- PURPOSE: To enable an individual with muscular dystrophy to rise from a chair independently. The user required a chair that would raise him almost to a standing position and enable him to wiggle off the seat while adjusting the height as needed. A commercially-available swiveling, reclining armchair was purchased and mounted on a castored steel base equipped with a motor, gearbox, and power screw. A square metal tube frame was added to the base to support the chair, ret...[More Information]
   
   
9. ENHANSIT (MODEL ULF-3) EnhanSit, model ULF-3, is an electronic seat lifting system that attaches to the bottom of recliners for use by persons with arthritis or mobility, lower extremity, balance, or neurological disabilities. This steel-frame system is engineered to offer full reclining and lifting capabilities while not interfering with or damaging the chair's existing features. The unit ships fully assembled and attaches to the bottom of rocker, wall-hugging, and stationary or simple push back recliners. The unit i...[More Information]
   
   
10. FAIRVIEW The Fairview is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic, polyester, and Olefin fabric, this chair also features traditional styling with a tufted chair back design, arm covers, and a magazine pocket on t...[More Information]
    
    
11. GENTLE LIFT RECLINER (MODELS TMR48, TMR49, TMR348, TMR329, & ECONOMY) The Gentle Lift Recliner line includes 2- and 3-position, fully reclining seat lift chairs designed to assist individuals who have difficulty sitting down in or getting up from arm chairs. Features include a hardwood (oak) frame; fire retardant materials; quick disconnect electrical components; arm, headrest, and frame covers; a double plate, wide base with steel base frame for stability; and a large side pocket. The entire chair lifts with the user seated to raise the user to a standing positio...[More Information]
    
    
12. GOLDEN POWER LIFT CHAIRS Fully powered lift chair. Paddle or toggle switch. Emerald may be accessorized with heat and massage features. Sapphire can fully recline. Also available is a drop-arm rehabilitation model in which the seat stays level during lift to facilitate transfer to a wheelchair. All chairs come in 3 standard sizes. Custom sizes available. Lifetime warranty on lift mechanism, and a one year warranty on the chair. Fabric or vinyl....[More Information]
    
    
13. HEAT AND MASSAGE LIFT CHAIR (MODEL 70557) The Heat and Massage Lift Chair, model 70557, is a recliner chair designed to assist individuals with mobility disabilities in rising to a standing position. This electric chair has three reclining positions, a lift mechanism to bring the user smoothly to a standing position, heat and gentle vibrating massage, hand-held controls, and a choice of velvet fabric or vinyl upholstery. It has a single motor with a built in emergency battery back-up, allowing the chair to return to sitting position in ...[More Information]
    
    
14. LIFT CHAIR --- CUSTOM ADAPTATION --- PURPOSE: To enable an individual with dermatomyositis to use a chair. Because the individual was unable to get out of a chair independently, she often had to stand for long periods. Commercially-available lift chairs did not placer in the position she needed in order to stand. The custom-made chair started with a padded, vinyl-covered executive-style office chair which removed from its star-shaped wheeled base. The chair was bolted to a rectangular base tig welded toget...[More Information]
    
    
15. LIFT CHAIR (PETITE SERIES 1500) Full power lift and recline chair sized for persons 5 feet 2 inches and under, with hardwood chair frame with steel fasteners and single switch hand control. Screw lift mechanism, powered by 115 volt motor drive, lifts up to 350 pounds. Chair rests on 14 gauge steel base with wide stance for stability. Polyfoam seat cushions. Backs have non-allergic fiber padding. Chair is covered in fire-retardant, velvet fabric, available in a variety of colors. One year warranty on motor, lift mechanism and o...[More Information]
    
    
16. LIFT CHAIRS (SERIES 2500 & SERIES 4500) Both Series 2500 and 4500 chairs have full power lift and recline, hardwood chair frames and 14 gauge steel base frames, steel fasteners and single switch hand controls. Both chair series have screw lift mechanisms, powered by 115 volt motor drives and lift up to 350 pounds. Both have polyfoam seat cushions and chair backs have non-allergenic fiber padding. Chairs are covered in fire retardant velvet fabric available in a variety of colors. One year warranty on motor and lift mechanism and one y...[More Information]
    
    
17. LIFT O MATIC SEAT CHAIR (MODEL 1300) Chair with seat lift. Mechanical spring lift assists person out of chair. Person must sit in chair to release lever to activate lift mechanism. Wooden frame and armrests, upholstered back and seat, vinyl or fabric. Width 22 inches, depth 20 1/2 inches, height 30 1/2 inches, weight 32 pounds....[More Information]
    
    
18. MURPHY The Murphy is a seat lift recliner chair designed for use by individuals with mobility disabilities. This motorized chair has a hardwood frame; a welded steel base; heavy-gauge, no-sag steel springs in the seat and back; dacron fibers in the arms, back, and chaise for shape retention; and a cushioned seat for comfort and support. Covered in acrylic and Olefin fabric, this chair also features traditional styling with a 10-button chair back design. In addition to the lift-out feature, this chair o...[More Information]
    
    
19. OVERSIZED LIFT CHAIR (MODEL 70539) The Oversized Lift Chair, model 70539, is a bariatric seat lift chair designed for use by individuals with mobility disabilities. This three-position chair has two motors and a heavy-duty scissor lift mechanism. Other features include a single-switch hand control and built in emergency battery back-up, allowing the chair to return to the sitting position in the event of a power outage. POWER: Uses household current. The backup uses 9-volt batteries (not included). DIMENSIONS (LxW): The chair is ...[More Information]
    
    
20. PETITE RECLINER LIFT CHAIR (MODEL 70559) The Petite Recliner Lift Chair, model 70559, is a seat lift chair designed for use by individuals with mobility disabilities or lower extremity disabilities who need assistance rising from a chair. This three-position lift/recliner chair has a continuous seat-to-ottoman chaise pad that completely supports the user's legs. The chair has a single electric motor with a built-in emergency battery back-up that allows the chair to return to the sitting position in the event of a power outage. POWER: U...[More Information]
    
    
21. PORTABLE EASY UP The Portable Easy Up, models 1220 and 1221, is a foam seat lift cushion designed to assist individuals to stand up from a seated position. The cushion adds 3 to 4 inches to the height of any chair seat, and acts to position the hips and knees at 90 degrees to make it easier to rise. The cushion comes with a carry strap and a machine washable fabric cover with zipper closure. DIMENSIONS: 15 x 15 x 3 inches (model 1220, $29.95) or 15 x 15 x 4 inches (model 1221, $36). WEIGHT: Under 1 pound. COLOR:...[More Information]
    
    
22. POWERED ELEVATED CHAIR --- CUSTOM ADAPTATION -- PURPOSE: To provide a customized lifting chair for an individual with mobility disabilities that can be easily moved throughout a residential setting, including going through doorways. The chair has a U-shaped base made of rectangular hollow steel with a vertical post at the back, and large casters on the front ends of the U and smaller ones at the back. There are also larger bike-type wheels on either side which can be used to propel the chair if necessary. Additionally...[More Information]
    
    
23. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-10) The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a ...[More Information]
    
    
24. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-20) The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a ...[More Information]
    
    
25. PRIDE CLASSIC 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL CL-30) The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a c...[More Information]
    
    

Page 1 of 3    Next page »