Products are listed alphabetically.

« Previous page    Page 2 of 2

26. JAR OPENING GLOVES The Jar Opening Gloves are grasping aids for the hands designed to facilitate opening jar lids for individuals with grasping disabilities, arthritis, carpal tunnel syndrome, or wrist pain. These knit gloves have rubberized raised nubs on the fingers and palms that help users to tightly grip any size jar with ease. When purchased as a pair, these gloves allow the user to use one hand to grip the jar in position and the other to twist the jar lid open without having to apply excessive pressure to ...[More Information]
    
    
27. LOOPED EXERCISE AIDS (MODEL AH3) The Looped Exercise Aids, model AH3, are grasping aids for the hand and exercise cuffs designed for use by individuals with grasping and upper extremity disabilities. This device is made of fabric loops attached to adjustable padded wrist straps. This device is intended to assist users to grip exercise equipment. When exercise is performed, the loops are slipped over the handles to grip items such as rowing oars, indoor rowing machines and other types of gym and fitness equipment. SIZES: One siz...[More Information]
    
    
28. MADDAGRIP UNIVERSAL BUILT-UP GRIP (MODEL F74616) The Maddagrip Universal Built-up Grip, model F74616, is a mouth-inflatable utensil holder designed to provide an enlarged gripping area on eating or writing instruments. The fill tube recesses flush with the surface. When deflated, the unit folds flat for transport or storage. DIMENSIONS: 4.5 x 2.5 x 1.75 inches, inflated....[More Information]
    
    
29. MAGNETIC WAND 7.5IN The Magnetic Wand 7.5in is a magnetic grasping aid for hand for persons with limited manual dexterity. The wand has a magnet on one end, and was designed for use with the World Wide Games Bingo Chips (see separate entry) so the chips are easier to move on the board and to pick up. COLOR: Assorted. DIMENSIONS: 7.5 inches long....[More Information]
    
    
30. MILBAT UNIVERSAL CUFF The Milbat Universal Cuff is a grasping aid for hand designed for use by individuals with grasping disabilities, arthritis, or limited hand function. Designed to provide assistance in holding or grasping items such as utensils and other small items, this handmade cuff fastens around the hand with Velcro straps that adjust to fit most hands. The cuff is made of lightweight washable mesh. SIZES: One size fits most. ...[More Information]
    
    
31. NEWGRIP GLOVES NewGrip Gloves are grasping aid for hand designed for use by individuals with arthritis, carpal tunnel syndrome, or grasping disabilities. These grasping aids have hand pads, which cover the palm and fingers, while the top of the hand is uncovered to prevent overheating. Wide wrist straps provide support to the wrists. The neoprene hand pads attach to the woven cotton wrist straps with Velcro. Both pads and straps can be adjusted to hand shape and wrist size. OPTIONS: Spare pads or straps. SIZES...[More Information]
    
    
32. OUTDOOR GRIPPING AID (MODEL AH2) The Outdoor Gripping Aid, model AH2, is a gripping aid for the hand designed for use by individuals with grasping and upper extremity disabilities. This device features an adjustable wrist strap that extends over the back of the hand. Another strap that extends from the top of the hand over the palm to the inside of the wrist can be tightened to help the user to form a fist to grasp a variety of items. The Outdoor Gripping Aid is made of heavy-duty fabric, and it is designed to be placed over a...[More Information]
    
    
33. POLLY POWER GRIP The Polly Power Grip is a grasping aid for hand designed for use by individuals with arthritis and other grasping disabilities. This lightweight tool has vise-like jaws that adjust to varying widths and that close by squeezing the handles and open by pulling the handles apart. This device aids in providing a firmer grip with more power for pushing, pulling, picking up, turning, squeezing, or holding. This tool can be used to turn keys; open bottles, tubes, small jars, medicine bottles (including...[More Information]
    
    
34. POOL CUE CUFF (MODEL 9462) The Pool Cue Cuff, model 9462, is a grasping aid for hand designed for use by individuals with spinal cord injury or upper extremity disabilities. This cuff is designed to hold a pool cue for those with limited hand function. A strap holds the hand around a pool cue. It is length-adjustable and is lined with Dycem to prevent slipping. The cuff is made of suede leather with D-ring Velcro closure....[More Information]
    
    
35. REFLEX 8 INCH CHEFS KNIFE (MODEL AA5245) The Reflex 8” Chefs Knife, model AA5245, is a kitchen knife designed for use by individuals with arthritis or limited hand and arm strength. The smooth edged reflex handle gives the user more ease in cutting. DIMENSIONS: 8 inch smooth edge....[More Information]
    
    
36. ROLYAN WALKER SPLINT (MODELS A7671 TO A7674) The Rolyan Walker Splint, models A7671 to A7674, are splints designed to help individuals with arthritis and neurological disabilities to securely grasp a walker handle. It features wrist straps for stability and is made from Polyform splinting material with a Kushionflex pad. The splints can be specifically adapted to each user by using a heat gun or hot water. Available for right- or left-handed use. DIMENSIONS: Determined by width of 2nd to 5th metacarpal phalangeals (MCPs). Small/Medium is 3...[More Information]
    
    
37. SLIP GRIPS -------- PROTOTYPE --------- PURPOSE: To design a prototype of a gripping device (Slip Grip) to assist individuals with limited hand mobility to manipulate objects that they would otherwise be unable to use. The product is used by slipping the finger holds over the thumb and forefinger and then snapping objects in to place via the clips located in between these finger holds. At a slight angle, the clip directs objects placed in it downward, giving the user a natural range of motion. When wearing...[More Information]
    
    
38. SMALL TOY CAR HOLDER -------- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create an adapted small toy car holder for children with grasping and fine motor skill disabilities. Using the hot glue gun, glue the top cover (lid) of the film canister to the roof of the toy car. Attach the film canister is attached to the lid and can then be used by a child as a handle to propel the toy car. The bottom of the canister can be removed for children not requiring the “handle” without interfering with the car’s function. MATER...[More Information]
    
    
39. TAP TURNER (MODEL 16K025) The Tap Turner, model 16K025, is a tap turner designed for use by individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. This device clamps onto a water tap or a door knob to convert knobs that are difficult to turn into levers. DIMENSIONS: 2 inches (6 centimeters) diameter....[More Information]
    
    
40. TEXTURED GRIP BALL (MODEL H70858) The Textured Grip Ball, model H70858, is a hand exercise ball with a surface made of small individual bumps and a center hole. There is an internal bell which rings when shaken. The end of the hole may be pushed through with a pencil to create a pencil holder for persons requiring a built-up writing instrument holder. DIMENSIONS: 2 inches in diameter....[More Information]
    
    
41. TOY HOLDER The Toy Holder, ##6766, is an adjustable grasping aid for the hand designed to allow a person without the ability to grasp to interact with a small toy in their hand. This snap on device has 2 Velcro bands used to hold a toy in place, and 3/4-inch webbing straps with snap closure that wrap around the palm and wrist. COLOR: Rainbow strapping....[More Information]
    
    
42. UDRINK The uDrink is a can, cup, or bottle holder designed for use by individuals with severe physical, neurological, upper extremity, or grasping disabilities or spinal cord injury. This device consists of a container holder with super grip non-slip strap liner and a stainless steel handle with a rubberized coating. The strap liner allows the strap to securely hold irregularly shaped items and containers, as well as containers covered in condensation. The handle is equipped with a slot through which t...[More Information]
    
    
43. UNIVERSAL HAND CLIP The Universal Hand Clip is a grasping aid for the hand designed for use by individuals with limited hand strength, arthritis or other graspings or upper extremity disabilities. This spring action hand clip fits securely against the hand and attaches to objects with strips of heavy-duty hook and loop material. It can be used on phones, cups, bottles, hair brushes and other similar items. DIMENSIONS (LxWxD): 8 x 4 x 1 inches....[More Information]
    
    
44. UTENSIL HANDLES (MODEL 6760) Utensil Handles, model 6760, are foam holders that fit into palm of the hand. The holders have a hole in the center for eating utensils, personal hygiene items, activity brushes and crayons, and other items. The holders have an anchor strap that goes around the back of the hand, are contoured, and adjustable for fit. These devices may also be used as hand exercisers. SIZES: Small (1-inch diameter x 3 inches) and Large (1.5-inch diameter x 3.75 inches). COLOR: Red, bright blue, or orange....[More Information]
    
    
45. VELCRO BRACELET -------- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create a Velcro bracelet that can be used by a child with grasping disabilities. First, sew a once inch piece of hook Velcro to one end of the elastic and a one inch piece of loop Velcro to the other end. Second, sew a two inch piece of hook Velcro at the middle of the elastic. Third, stick a piece of loop Velcro onto the toy that the child wishes to play with. The Velcro bracelet aids the child in grasping the toy he or she wishes to play w...[More Information]
    
    

« Previous page    Page 2 of 2