Skip navigation View an alternate layout of this website with limited styles and no horizontal scrolling
Menu
Skip to Quick Links

Reacher

Products are listed alphabetically.

« Previous page    Page 2 of 4    Next page »

  1. GRABBER --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Grabber is a reacher designed for use by individuals who have difficulty bending or stretiching. This reacher has a wooden shaft, angled gripping fingers, and a trigger handle to activate the fingers. DIMENSIONS: 30 inches long....[More Information]

  2. GRIPPER TONGS (MODEL 100871) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. ---The Lumex Gripper Tongs are reachers with pistol type handle designed to aid people with impaired movement or without the ability to stand and reach high places. Voluntary closing tongs operate with a trigger mechanism. The tongs' jaws are lined with rubber and have hooks on the end. The tongs have a fixed gripping device and a wrist strap. Length: 25 inches....[More Information]

  3. GRIPTANG --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Horizontal grip, available with voluntary opening or closing mechanism....[More Information]

  4. HANDI-REACHER (MODELS AA8052, AA8054, AA8056 & AA8058) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Handi-Reacher is a reacher designed for use by individuals with mobility disabilities and limited hand strength. This device enables users to reach items overhead or on the floor without stretching or bending. This reacher features wire-driven rubber-lined non-slip grasping jaws and a textured pistol grip handle with an ergonomically-designed trigger that is operated with the whole hand, requiring less strength than...[More Information]

  5. HANDY HAND --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with finger trigger grip. Voluntary closing. Length 29 inches. Scoop type jaws large enough to hold average beverage cans. Aluminum, with plastic hand grip, weight 5 ounces....[More Information]

  6. HARDWOOD SHEARS (MODELS 87-1450, 87-1451, & 87-1452) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Large wooden scissors, scissor grip rubber pads on tips. Voluntary closing. 18, 27 or 33 inches long....[More Information]

  7. HAWKBILL REACHERS (MODEL 6424) --- DISCONTINUED. (Verified 10/2012) RETAINED IN DATABASE FOR REFERENCE. ---Lightweight wooden and aluminum reachers. Diagonal trigger with horizontal grasp, voluntary closing. Pointed wide opening jaws. Plastic covered spurs on jaws to push or pull objects. Lengths, 28 or 20 inches, 8 ounces....[More Information]

  8. LIGHTED REACHER Picture of LIGHTED REACHER --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Lighted Reacher is a reacher designed for use by individuals with mobility or upper extremity disabilities. This reacher has a comfortable pistol grip, a locking jaw with suction cups, and a light. Squeezing the handle turns the light on. The light turns off automatically after 10 seconds. POWER: Uses two triple-A batteries (not included). ...[More Information]

  9. MAGNETIC E Z REACH (MODEL M2 11) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with magnetic tip. Scissor design of 5 ply birch with magnetic tips can pick up small or large objects. Length 27 inches. Voluntary closing....[More Information]

  10. MAGNETIC E-Z REACH (MODEL 72) --- DISCONTINUED. (Verified 02/2008) RETAINED IN DATABASE FOR REFERENCE. --- Reacher extends arm 27 inches. Scissor like action with non-slip ends. Strong magnetic tips picks up pins, clips, etc....[More Information]

  11. MATEY CLIP-ON REACHING AID (MODEL F76955) --- DISCONTINUED. (Verified 7/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Matey Clip-On Reaching Aid, model F76955, is a reacher with a plated metal srping clip near the trigger designed to hold the reacher from a rail, wheelchair, table leg, etc. in a vertical position. The clip will hold onto any rail or bar with a diameter of 1 to 1.25 inches. The reacher has an aluminum shaft, plastic trigger grip handle, and voluntary closing jaw. DIMENSIONS: 26.5 inches long....[More Information]

  12. MATEY DESK SIZE REACH AID (MODEL F76948) --- DISCONTINUED. (Verified 07/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Matey Desk Size Reach Aid, model F76948, is a reacher designed for use at a desk, work station, or other close quarters to assist individuals to reach and grasp items. The device has an aluminum shaft, plastic handle with pistol trigger grip, and voluntary closing jaw. DIMENSIONS: Overall length is 15.75 inches; maximum grip is 2.5 inches. WEIGHT: 3.1 ounces....[More Information]

  13. OMNIGRIP REACHER (MODELS 26110 & 26111) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lightweight reacher weighs less than 10 ounces. Features wrist support, touch buttons to engage locking mechanism (eliminates need for sustained grasp); jaw that adjusts in vertical and rotational positions, magnet on jaw for retrieving small metal objects. Easy grip pistol and trigger type handle. Available in 30 inch (26 110) or 22 inch (26111) lengths....[More Information]

  14. OMNIGRIP REACHERS (MODELS H76960-0110, 0111, & 0112) --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- Omnigrip Reachers are lightweight reachers designed for use by individuals with arthritis or mobility disabilities. Made of aluminum and plastic, they feature a wrist support, touch buttons to engage the locking mechanism, eliminating the need for sustained grasp; jaws that adjust in vertical and rotational positions, and magnets on the jaws for retrieving small metal objects. Each model also has an easy grip pistol and...[More Information]

  15. OPEN REACHER (MODELS 100750, 100760, 100770, 100800, AND 100810) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Lumex Open Reacher are voluntary closing reachers designed for individuals who have a reduced reach due to their restriction to a wheelchair. Horizontal grip handle. The Reacher has a wooden handle, a metal frame, and a 2 pronged jaw with rubber, sure-grip tips. It is particularly well-suited for reaching dishes. The Reacher is available in lengths of 16 (Model 100750), 20 (100760), 24 (100770), 28 (100800), and 32 (...[More Information]

  16. PEDIATRIC REACHER Picture of PEDIATRIC REACHER --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Pediatric Reacher is designed for use by children with mobility and balance disabilities. This lightweight aluminum reacher has a plastic pistol grip handle, a trigger activator, and a single claw jaw. DIMENSIONS: 15 inches long....[More Information]

  17. PIC-STIX REACHERS --- DISCONTINUED. (Verified 04/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Pic-Stix Reachers are designed for use by individuals who have difficulty bending to reach items or stretching to reach items above them. These lightweight plastic reachers have pistol grips and U-shaped gripping jaws that can lift items weighing up to two pounds. DIMENSIONS: Available in 32- and 20-inch long models....[More Information]

  18. PRESTON REACHER (MODELS PC 7832 & PC 7833) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Preston Reacher, models PC 7832 and PC 7833, is designed for persons with limited reach and hand strength. The jaws of the reacher open when the handgrip is pressed; when released, spring pressure closes the jaws. The reachers are made of lightweight metal tubing with a wooden handle. DIMENSIONS: 19 inches long (PC 7832) or 32 inches long (PC 7833). WEIGHT: PC 7832 is 3.5 ounces; PC 7833 is 5 ounces....[More Information]

  19. RAPTOR, THE (MODEL F76945-0000) --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Raptor, model F76945-0000, is a reacher designed for use by individuals with arthritis, spinal cord injury, or mobility disabilities. This lightweight reacher has a contemporary design, with a contoured grip with a squeeze control for the grasping jaws set at a right angle to the rest of the unit. The jaws can grip small items such as dimes or bulky items such as newspapers, clothing, and cans. A hook-like extension...[More Information]

  20. REACH GRIP SNARE --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic rigid tube, 3/4 inch diameter, 36 inches long. Steel cable loop enclosed in tube. Loop adjustable from upper end by handle and vinyl cable cover, snare loop can adjust from 1/4 inch to 8 inches. Small magnet and hook on end....[More Information]

  21. REACH IT! POCKET REACHER Picture of REACH IT! POCKET REACHER --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- Reach It! Pocket Reacher is a telescoping reacher designed for use by individuals with mobility or physical disabilities. This reacher collapses to fit in a purse or pocket and has a hook on one end and a magnet and adhesive pad on the other. The strong magnet can pick up a pair of scissors while adhesive pad grabs pills, paper, and other small items. The adhesive pad cleans with soap and water. The hook can lift up 3 p...[More Information]

  22. REACH-N-GRAB (MODEL F76961) --- DISCONTINUED. (Verified 10/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Reach-n-Grab is a wood and aluminum reacher designed to extend the user's reach to save bending and stretching. The reacher features a wooden handle with a squeeze lever which actuates two aluminum jaws covered with vinyl. The spring-loaded jaws remain open until the lever is squeezed, and will grasp cans, jars, boxes, papers, clothing, and other items up to 6 5/8 inches wide. DIMENSIONS: 31.5 inches overall....[More Information]

  23. REACHER (MODEL 87-1445) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Reachers with pistol trigger grip, voluntary closing. Lightweight, 6 ounces. 26 1/2 inches long....[More Information]

  24. REACHER (MODEL R10) ---DISCONTINUED. (Verified 8/1998) RETAINED IN DATABASE FOR REFERENCE. --- The Reacher is designed for use by individuals with mobility disabilities. It can assist the user by reaching for objects, and at the same time, it is designed to prevent a fall when grasping for an object. It can also help the user dress. With its magnetic tip, it can also be used to reach for light, metal objects. DIMENSIONS: 26 inches long. WEIGHT: 7 ounces. WARRANTY: Satisfaction is guaranteed or the product may be r...[More Information]

  25. REACHER HOLSTER (MODEL 26130) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Holster attaches under the arm of a wheelchair to carry a reacher. Attaches with two tubing clips that are secured by pliers. Brackets are plastic covered metal and can be removed independently of the clamps....[More Information]

« Previous page    Page 2 of 4    Next page »

Return to current products
  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.