Products are listed alphabetically.

Page 1 of 1

1. AKTIVA REACHERS --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Aktiva Reachers are designed for use by individuals with reduced arm and hand strength and mobility. The handle is angled to make use of existing hand strength and to permit an effective grip in a variety of situations. Activating the U-shaped gripping jaws requires minimal strength and the jaws are adapted for both precision gripping of small items and securing larger items. The gripping surface is covered in resilient...[More Information]
   
   
2. ALUMINUM REACHERS --- DISCONTINUED. (Verified 07/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Aluminum Reachers are designed for use by individuals who use wheelchairs or who have difficulty bending or reaching over their heads. These lightweight reachers have an ergonomically pistol grip, squeeze trigger operation, a serrated jaw with a flexible foam rubber tip. A small magnet at the tip also helps in retrieving small metal items, and a lug on the top aids in pulling items toward the user. DIMENSIONS: A 26-...[More Information]
   
   
3. ANGLE ARM REACHER (MODEL BK6425) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Angle arm reacher with wire frame wrist support. Rubber lined grab tongs open to 3 3/4 inches. Vertical grasp trigger grip requires minimal pressure, voluntary closing. Aluminum with plastic handle, weight 12 ounces. Swinging grab arm can angle approach to items, built in control to prevent heavy items from hitting wrist....[More Information]
   
   
4. BETTER GRIP WOODEN REACHER (MODEL BK6105) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Large wooden scissors-like reacher with serrated grip. Rubber pads on tips. Voluntary closing. 27 inches long....[More Information]
   
   
5. CAREX E-Z GRABBER (MODELS P605 & P606) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Carex E-Z Grabber is a reacher designed for use by individuals with upper extremity disabilities. This reacher has a 90-degree rotating arm for grasping objects from above or below. A locking tab holds the item in place for users with limited strength. This reacher also features an EZ Twist Shaft and wrist support. DIMENSIONS: Model P605 is 26 inches long and model P606 is 32 inches long....[More Information]
   
   
6. CLOSED REACHER (MODELS 100830, 100850, & 100860) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Lumex Closed Reacher is a reacher designed to aid individuals in grabbing and picking up small, lightweight item. It has a wooden handle, metal frame and 2-pronged jaw that opens when a trigger is squeezed. Available in 20, 28, and 32 inch lengths....[More Information]
   
   
7. COMPACT REACHER (MODEL R11) ---DISCONTINUED. (Verified 8/1998) RETAINED IN DATABASE FOR REFERENCE. --- The Compact Reacher is designed to assist persons with mobility disabilities in reaching for objects. It folds ups for storage and portability. DIMENSIONS: 21.25 inches long. WARRANTY: Satisfaction is guaranteed or the product may be returned in original package in original condition for replacement or refund within 30 days....[More Information]
   
   
8. DOUBLE DUTY CANE WITH REACHER --- DISCONTINUED. (Verified 3/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Double Duty Reacher Cane is an adjustable offset cane with a built-in reacher designed for use by individuals with mobility disabilities. This height-adjustable aluminum cane has an offset foam handle grip with a wrist loop; just below the handle is a trigger activator for the reacher. The trigger locks tight when not in use. The gripper jaw is located at the bottom of the cane and extends to the bottom of the wide, ...[More Information]
   
   
9. E Z GRIP --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Vertical grip, 30 inches long. Wide claws with suction holders on ends. Best for bulky items. Voluntary closing....[More Information]
   
   
10. E Z GRIP --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Vertical grip, 30 inches long. Wide claws with suction holders on ends. Best for bulky items. Voluntary closing....[More Information]
    
    
11. E ZEE REACHER (MODEL BK6426) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Lightweight, aluminum reacher. Curved wire wrist support. Rubber lined grab tongs. Vertical grasp squeeze trigger, voluntary closing. Overall length, 35 inches, 23 inches from tongs to palm grip....[More Information]
    
    
12. EASY-SQUEEZE REACHER (MODEL G3022) --- DISCONTINUED. (Verified 11/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Easy-Squeeze Reacher, model G3022, is a reacher designed for use by individuals with mobility disabilities. This reacher features a large, easy-to-squeeze trigger and a rounded gripping claw. The claw can pick up coins, cans, newspapers, etc. DIMENSIONS: 27 inches long. WEIGHT: Five ounces....[More Information]
    
    
13. ECONOMY REACHER -- dISCONTINUED. vERIFIED 9/2012. rETAINED IN DATABASE. -- The economy Reacher is a reacher designed to reach things that are too high or too low for individuals with limited mobility. This reacher is lightweight and made of aluminum and plastic. It has a long comfortable, spring activated trigger which requires very little hand strength to operate. DIMENSIONS: 27 inches long....[More Information]
    
    
14. ECONOMY REACHER (MODEL 26115) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lightweight aluminum and plastic reacher with spring activated trigger. Requires minimum hand strength. Easy grip pistol type handle. Magnet for retrieving small metal objects. Metal post on end aids in dressing. Weighs 7 ounces....[More Information]
    
    
15. EXTEND A HAND --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with pistol trigger grip. Voluntary closing. Lightweight, 6 1/ 2 ounces. 26 1/2 inches long....[More Information]
    
    
16. FEATHERWEIGHT II REACHER (MODELS A665-15 & A665-14) -- DISCONTINUED. VERIFIED 3/2013. RETAINED IN DATABASE FOR REFERENCE. -- The Featherweight II Reacher is designed for use by individuals with mobility disabilities. This device enables users to reach items overhead or on the floor without stretching or bending. This aluminum reacher features a highly-visible Gripcert slip-resistant surface on the grasping jaw and a contoured, textured pistol-grip handle. The jaw has a rubber tip to protect fabrics. The hook trigger accommodates two-handed use, e...[More Information]
    
    
17. FEATHERWEIGHT REACHER -- DISCONTINUED. VERIFIED 3/2013. RETAINED IN DATABASE FOR REFERENCE. -- The Featherweight Reacher is designed for use by individuals with mobility disabilities or those who have difficulty bending or stretching to reach or pick up objects. This lightweight reacher has an aluminum shaft, a plastic pistol grip and trigger-style closer, and a slip-resistant Gripcert claw-style jaw. Other features include a magnetic tip for retrieving small metal objects, and a plastic clip to attach the reacher to...[More Information]
    
    
18. FOLDING EXTEND A HAND (MODEL 87-1458) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Pistol trigger hand grip, folding with case. 32 inches long open and 12 inches long closed. Voluntary closing....[More Information]
    
    
19. FOLDING REACHER (MODEL K16912) --- DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Folding Reacher, Model K16912, is designed for persons with physical disabilities who are restricted to a wheelchair. The 21-inch rod folds up to a compact 13-inches for side bag storage when not in use. The design includes a simple trigger action to ensure a tight grip. The claw and magnetized tip allow items to be recovered easily....[More Information]
    
    
20. FOLDING REHAB REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol trigger hand grip, folding with case. 22 inches long open and 12 inches long closed. Voluntary closing....[More Information]
    
    
21. GOLDEN RETRIEVER REACHER --- DISCONTINUED. (Verified 03/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Golden Retriever Reacher is designed for use by persons with limited reach and hand strength. This reacher has a balanced design with a contoured pull handle that allows all four fingers to exert direct tension to the non-slip U-shaped gripping jaws. The jaws have latex gripping liners and are arched for gripping bulky items, but they can also retrieve small, delicate items. This reacher is constructed of lightweigh...[More Information]
    
    
22. GRAB ALL (MODELS GJ 3781 & GJ 3782) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. ---The Grab Alls, models GJ 3781 and GJ 3782, are horizontal grip, double claw reachers designed for gripping bulky items. The reachers are voluntary closing. DIMENSIONS: 31 inches long. WEIGHT: 9 ounces....[More Information]
    
    
23. GRAB ALL REACHER (MODEL BK6438) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- Reacher with horizontal grip. Double claw for gripping bulky items. 31 inches long. Voluntary closing. 9 ounces....[More Information]
    
    
24. GRAB ALL REACHER (MODEL D2027) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reacher with tongs perpendicular to shaft. Horizontal grip, squeeze to close. Spring loaded voluntary closing tongs. 30 inches long....[More Information]
    
    
25. GRAB IT --- DISCONTINUED. (Verified 05/2007) RETAINED IN DATABASE FOR REFERENCE. --- Reacher for picking up items with out bending, stooping or straining. Voluntary closing, when handle is squeezed, finger like suction cup ends close in on object. When handle is released, fingers open and object drops out. Recycled aluminum. Standard size 31 inches. Weighs 8 ounces. 16 inch and 4 1/2 foot lengths available. ....[More Information]
    
    
26. GRABBER --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Grabber is a reacher designed for use by individuals who have difficulty bending or stretiching. This reacher has a wooden shaft, angled gripping fingers, and a trigger handle to activate the fingers. DIMENSIONS: 30 inches long....[More Information]
    
    
27. GRIPPER TONGS (MODEL 100871) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. ---The Lumex Gripper Tongs are reachers with pistol type handle designed to aid people with impaired movement or without the ability to stand and reach high places. Voluntary closing tongs operate with a trigger mechanism. The tongs' jaws are lined with rubber and have hooks on the end. The tongs have a fixed gripping device and a wrist strap. Length: 25 inches....[More Information]
    
    
28. GRIPTANG --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Horizontal grip, available with voluntary opening or closing mechanism....[More Information]
    
    
29. HANDI-REACHER (MODELS AA8052, AA8054, AA8056 & AA8058) --- DISCONTINUED. (Verified 09/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Handi-Reacher is a reacher designed for use by individuals with mobility disabilities and limited hand strength. This device enables users to reach items overhead or on the floor without stretching or bending. This reacher features wire-driven rubber-lined non-slip grasping jaws and a textured pistol grip handle with an ergonomically-designed trigger that is operated with the whole hand, requiring less strength than...[More Information]
    
    
30. HANDY HAND --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with finger trigger grip. Voluntary closing. Length 29 inches. Scoop type jaws large enough to hold average beverage cans. Aluminum, with plastic hand grip, weight 5 ounces....[More Information]
    
    
31. HARDWOOD SHEARS (MODELS 87-1450, 87-1451, & 87-1452) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Large wooden scissors, scissor grip rubber pads on tips. Voluntary closing. 18, 27 or 33 inches long....[More Information]
    
    
32. HAWKBILL REACHERS (MODEL 6424) --- DISCONTINUED. (Verified 10/2012) RETAINED IN DATABASE FOR REFERENCE. ---Lightweight wooden and aluminum reachers. Diagonal trigger with horizontal grasp, voluntary closing. Pointed wide opening jaws. Plastic covered spurs on jaws to push or pull objects. Lengths, 28 or 20 inches, 8 ounces....[More Information]
    
    
33. LIGHTED REACHER --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. --- The Lighted Reacher is a reacher designed for use by individuals with mobility or upper extremity disabilities. This reacher has a comfortable pistol grip, a locking jaw with suction cups, and a light. Squeezing the handle turns the light on. The light turns off automatically after 10 seconds. POWER: Uses two triple-A batteries (not included). ...[More Information]
    
    
34. MAGNETIC E Z REACH (MODEL M2 11) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with magnetic tip. Scissor design of 5 ply birch with magnetic tips can pick up small or large objects. Length 27 inches. Voluntary closing....[More Information]
    
    
35. MAGNETIC E-Z REACH (MODEL 72) --- DISCONTINUED. (Verified 02/2008) RETAINED IN DATABASE FOR REFERENCE. --- Reacher extends arm 27 inches. Scissor like action with non-slip ends. Strong magnetic tips picks up pins, clips, etc....[More Information]
    
    
36. MATEY CLIP-ON REACHING AID (MODEL F76955) --- DISCONTINUED. (Verified 7/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Matey Clip-On Reaching Aid, model F76955, is a reacher with a plated metal srping clip near the trigger designed to hold the reacher from a rail, wheelchair, table leg, etc. in a vertical position. The clip will hold onto any rail or bar with a diameter of 1 to 1.25 inches. The reacher has an aluminum shaft, plastic trigger grip handle, and voluntary closing jaw. DIMENSIONS: 26.5 inches long....[More Information]
    
    
37. MATEY DESK SIZE REACH AID (MODEL F76948) --- DISCONTINUED. (Verified 07/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Matey Desk Size Reach Aid, model F76948, is a reacher designed for use at a desk, work station, or other close quarters to assist individuals to reach and grasp items. The device has an aluminum shaft, plastic handle with pistol trigger grip, and voluntary closing jaw. DIMENSIONS: Overall length is 15.75 inches; maximum grip is 2.5 inches. WEIGHT: 3.1 ounces....[More Information]
    
    
38. OMNIGRIP REACHER (MODELS 26110 & 26111) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lightweight reacher weighs less than 10 ounces. Features wrist support, touch buttons to engage locking mechanism (eliminates need for sustained grasp); jaw that adjusts in vertical and rotational positions, magnet on jaw for retrieving small metal objects. Easy grip pistol and trigger type handle. Available in 30 inch (26 110) or 22 inch (26111) lengths....[More Information]
    
    
39. OMNIGRIP REACHERS (MODELS H76960-0110, 0111, & 0112) --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- Omnigrip Reachers are lightweight reachers designed for use by individuals with arthritis or mobility disabilities. Made of aluminum and plastic, they feature a wrist support, touch buttons to engage the locking mechanism, eliminating the need for sustained grasp; jaws that adjust in vertical and rotational positions, and magnets on the jaws for retrieving small metal objects. Each model also has an easy grip pistol and...[More Information]
    
    
40. OPEN REACHER (MODELS 100750, 100760, 100770, 100800, AND 100810) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Lumex Open Reacher are voluntary closing reachers designed for individuals who have a reduced reach due to their restriction to a wheelchair. Horizontal grip handle. The Reacher has a wooden handle, a metal frame, and a 2 pronged jaw with rubber, sure-grip tips. It is particularly well-suited for reaching dishes. The Reacher is available in lengths of 16 (Model 100750), 20 (100760), 24 (100770), 28 (100800), and 32 (...[More Information]
    
    
41. PEDIATRIC REACHER --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Pediatric Reacher is designed for use by children with mobility and balance disabilities. This lightweight aluminum reacher has a plastic pistol grip handle, a trigger activator, and a single claw jaw. DIMENSIONS: 15 inches long....[More Information]
    
    
42. PIC-STIX REACHERS --- DISCONTINUED. (Verified 04/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Pic-Stix Reachers are designed for use by individuals who have difficulty bending to reach items or stretching to reach items above them. These lightweight plastic reachers have pistol grips and U-shaped gripping jaws that can lift items weighing up to two pounds. DIMENSIONS: Available in 32- and 20-inch long models....[More Information]
    
    
43. PRESTON REACHER (MODELS PC 7832 & PC 7833) --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Preston Reacher, models PC 7832 and PC 7833, is designed for persons with limited reach and hand strength. The jaws of the reacher open when the handgrip is pressed; when released, spring pressure closes the jaws. The reachers are made of lightweight metal tubing with a wooden handle. DIMENSIONS: 19 inches long (PC 7832) or 32 inches long (PC 7833). WEIGHT: PC 7832 is 3.5 ounces; PC 7833 is 5 ounces....[More Information]
    
    
44. RAPTOR, THE (MODEL F76945-0000) --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Raptor, model F76945-0000, is a reacher designed for use by individuals with arthritis, spinal cord injury, or mobility disabilities. This lightweight reacher has a contemporary design, with a contoured grip with a squeeze control for the grasping jaws set at a right angle to the rest of the unit. The jaws can grip small items such as dimes or bulky items such as newspapers, clothing, and cans. A hook-like extension...[More Information]
    
    
45. REACH GRIP SNARE --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Clear plastic rigid tube, 3/4 inch diameter, 36 inches long. Steel cable loop enclosed in tube. Loop adjustable from upper end by handle and vinyl cable cover, snare loop can adjust from 1/4 inch to 8 inches. Small magnet and hook on end....[More Information]
    
    
46. REACH IT! POCKET REACHER --- DISCONTINUED. (Verified 12/2007) RETAINED IN DATABASE FOR REFERENCE. --- Reach It! Pocket Reacher is a telescoping reacher designed for use by individuals with mobility or physical disabilities. This reacher collapses to fit in a purse or pocket and has a hook on one end and a magnet and adhesive pad on the other. The strong magnet can pick up a pair of scissors while adhesive pad grabs pills, paper, and other small items. The adhesive pad cleans with soap and water. The hook can lift up 3 p...[More Information]
    
    
47. REACH-N-GRAB (MODEL F76961) --- DISCONTINUED. (Verified 10/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Reach-n-Grab is a wood and aluminum reacher designed to extend the user's reach to save bending and stretching. The reacher features a wooden handle with a squeeze lever which actuates two aluminum jaws covered with vinyl. The spring-loaded jaws remain open until the lever is squeezed, and will grasp cans, jars, boxes, papers, clothing, and other items up to 6 5/8 inches wide. DIMENSIONS: 31.5 inches overall....[More Information]
    
    
48. REACHER (MODEL 87-1445) --- DISCONTINUED. (Verified 4/2004) RETAINED IN DATABASE FOR REFERENCE --- Reachers with pistol trigger grip, voluntary closing. Lightweight, 6 ounces. 26 1/2 inches long....[More Information]
    
    
49. REACHER (MODEL R10) ---DISCONTINUED. (Verified 8/1998) RETAINED IN DATABASE FOR REFERENCE. --- The Reacher is designed for use by individuals with mobility disabilities. It can assist the user by reaching for objects, and at the same time, it is designed to prevent a fall when grasping for an object. It can also help the user dress. With its magnetic tip, it can also be used to reach for light, metal objects. DIMENSIONS: 26 inches long. WEIGHT: 7 ounces. WARRANTY: Satisfaction is guaranteed or the product may be r...[More Information]
    
    
50. REACHER HOLSTER (MODEL 26130) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Holster attaches under the arm of a wheelchair to carry a reacher. Attaches with two tubing clips that are secured by pliers. Brackets are plastic covered metal and can be removed independently of the clamps....[More Information]
    
    
51. REACHERS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Scissors handle, tongs perpendicular to handle for reaching items on high shelves. 21 inches long. Voluntary closing. Nonslip tongs on one end, cushioned handle grips on other end. Chrome plated steel....[More Information]
    
    
52. REACHERS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Metal folding scissors. Scissor type handles with wide finger span for operation. Voluntary closing....[More Information]
    
    
53. REACHERS --- DISCONTINUED. (Verified 08/93) RETAINED IN DATABASE FOR REFERENCE. --- Vertical grip, 26 inch length, swivel head with hooked tongs locks in position when trigger is squeezed, hooks on tongs for pulling heavy objects without lifting....[More Information]
    
    
54. REACHERS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Large wooden scissors, scissor grip, rubber pads on tips. Voluntary closing. 27 inches long. 11 ounces....[More Information]
    
    
55. REACHERS (MODEL 1085) --- DISCONTINUED. (verified 1/96) RETAINED IN DATABASE FOR REFERENCE. --- Scissors handle, tongs perpendicular to handle for reaching items on high shelves. 21 inches long. Voluntary closing....[More Information]
    
    
56. REACHERS (MODEL GJ 3785) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Metal folding scissors. Scissor type handles with wide finger span for operation. Voluntary closing....[More Information]
    
    
57. REACHERS (MODEL GJ 3786) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. ---Large wooden scissors grip, rubber pads on tips. Voluntary closing. 27 inches long. 11 ounces....[More Information]
    
    
58. REACHERS (MODELS SA-1001 & SA-1002) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Lightweight aluminum reachers. Pistol grip with trigger operated opening mechanism, voluntary closing. Magnet on end. 2 models: 26 1/2 inches long, weight 6 ounces; 32 1/2 inches long, weight 8 ounces....[More Information]
    
    
59. REACHING AID (MODEL M2 18) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Reachers with trigger grip, magnet on tip, lightweight and precise grasp. Length 32 inches. Voluntary closing....[More Information]
    
    
60. REACHING AIDS (MODELS LB828A TO LB828F) --- DISCONTINUED. (Verified 9/1999) RETAINED IN DATABASE FOR REFERENCE. --- Reachers. Variety of styles including featherweight, longreach, retainer, easy reacher and folding reacher....[More Information]
    
    
61. REHAB REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Clip on reacher: pistol trigger grip reacher, voluntary closing, lightweight 6 1/2 ounces, 26 1/2 inches long, attaches to cane, crutch etc. Retaining reacher: lever operated reacher to be used with either hand or wrist, pistol hand grip, 32 1/2 inches long, locks in closed position, weight 8 ounces, voluntary closing. Basic reacher: pistol trigger grip reacher, 26 1/2 inches long, voluntary closing, 6 1/2 ounces. Long reacher: pistol tri...[More Information]
    
    
62. REHAB REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol trigger grip, voluntary closing claw. Lightweight, 8 ounces. 32 1/2 inches long....[More Information]
    
    
63. REHAB REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol trigger grip, voluntary closing claw. Lightweight, 8 ounces. 32 1/2 inches long....[More Information]
    
    
64. REHAB REACHER TOGGLE LEVER RETAINER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Toggle lever operated claw to be used with other hand or wrist. Pistol hand grip. 27 inches long. Voluntary closing, locks in closed position. Weight 8 ounces....[More Information]
    
    
65. RUBBER GRIP LOCKING REACHER --- DISCONTINUED. (Verified 08/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Rubber Grip Locking reacher is designed to reach and hold items weighing up to two pounds for individuals who use wheelchairs and other who have difficulty bending or reaching items over head. The featherweight reacher features a trigger handle with a squeeze mechanism, rubber gripper cups on the end for a secure hold, and a flip up locking mechanism that locks the grippers around the item being held until released....[More Information]
    
    
66. SAMMONS PRESTON FOLDING REACHER --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Sammons Preston Folding Reacher is designed for use by persons with limited reach and hand strength. This reacher has a serrated claw-style jaw with a flexible foam rubber tip that conforms to the shape of most objects weighing one pound or less. The reacher is designed with an ergonomic plastic pistol grip and a sqeeze trigger and an aluminum shaft. DIMENSIONS: 26 inches long open and 15.5 inches long folded. The c...[More Information]
    
    
67. SCISSOR REACHERS --- DISCONTINUED. (Verified 04/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Scissor Reacher is designed for use by individuals who have difficulty bending to reach items or stretching to reach items above them. This lightweight birch plywood reacher has two finger/hand holes (one on each arm), magnetic tips, and gripping jaws that open extra wide for grasping large objects. This reacher may be used with one or two hands. DIMENSIONS: 27 inches long....[More Information]
    
    
68. SHOE NURSE --- DISCONTINUED. (verified 11/95) RETAINED IN DATABASE FOR RECORDS. --- The Shoe Nurse is a long-handled shoe horn which combines a long-handled shoe horn with a gripper that holds the heel of the shoe in position (like a reacher). This lightweight metal device may also be used to grab round containers. Some easy assembly is required. DIMENSIONS: 23 inches long. WEIGHT: 1 pound. WARRANTY: 90 day guarantee....[More Information]
    
    
69. SIMPET REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol trigger grip reacher. Voluntary closing. Lightweight 6 1/2 ounces, 16 1/2 inches long. Attaches to cane, crutch, etc. With velcro fastener....[More Information]
    
    
70. SIMPET REACHER. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol trigger grip reacher. Voluntary closing. Lightweight 6 1/2 ounces, 16 1/2 inches long. Attaches to cane, crutch, etc. With Velcro fastener....[More Information]
    
    
71. TELESTIK 1000 --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- TeleStik 1000 is a telescoping reacher with one arm recommended for persons with lower back problems, arthritis, or severe hypertension; persons confined to bedrest; and wheelchair users. This portable retrieval aid's arm extends to 26 inches. At the end of the stick is the UltraStik adhesive disk system that will pick up over 2000 times before needing replacement. The disk is powerful enough to pick up heavy items, but ...[More Information]
    
    
72. TELESTIK 2100 --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- TeleStik 2100 is a telescoping reacher with two arms: one has a double-sided hook, the other has an adhesive disk. The manufacturer recommends use of the TeleStik by persons with lower back problems, arthritis, or severe hypertension; persons confined to bedrest; or by wheelchair users. It retracts to less than 8 inches and weighs 5.5 ounces, making it portable and suitable to carrying in a purse or pocket. The arms exte...[More Information]
    
    
73. TELESTIK 2700 --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- The TeleStik model 2700 is a reacher, telescoping magnet, long-handled hook, and dressing aid all in one, portable unit. This retrieval aid is recommended for persons with lower back problems, arthritis, or severe hypertension; persons confined to bedrest; and wheelchair users. The unit has two stainless steel telescoping arms that extend to 34 inches. At the end of one arm is a small yet powerful magnet that can be used...[More Information]
    
    
74. TELESTRAP --- DISCONTINUED. (Verified 6/2005) RETAINED IN DATABASE FOR REFERENCE. --- The TeleStrap is an accessory to the TeleStik Model 2100 and 2700 reachers (see separate entries). This grasping aid for the hand affixes the user's hand to the reacher's handle with a velcro closure strap. The TeleStrap also acts as a wheelchair arm mounting clamp that will attach the reacher to the user's chair....[More Information]
    
    
75. TWENTY FOUR INCH FOLDING REACHER (MODEL M2 17) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Folding reachers. Trigger grip, magnet on tip, lightweight and precise grasp. Length 24 inches, folds to 12 inches. Voluntary closing....[More Information]
    
    
76. VEE-ZEE RIGID REACHER (MODEL H76962-0000) --- DISCONTINUED. (Verified 04/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Vee-Zee Rigid Reacher, model H76962-0000, is designed for use by individuals with arthritis and mobility disabilities. This device enables users to reach items overhead or on the floor without stretching or bending. This aluminum reacher features a flexible metal arm support sheathed in plastic tubing. It is designed for left or right-handed use and can be bent into any shape by the user or a therapist. Other featu...[More Information]
    
    
77. VZ 2 RETRIEVER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol grip reacher. 40 inch long, 32 inch reach. Reacher hinged in middle and can be locked at various angles from 0 to 180 degrees by depressing and releasing thumb trigger. Handle positioned 8 inches up reacher with curved wire armrest at end of reacher. Tongs can grasp objects from paper to 3 1/2 inch wide. Folds to 22 1/2 inches. 12 ounces. Can lift over two pounds. Voluntary closing....[More Information]
    
    
78. VZ 3 REACHER --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Pistol grip reacher. 36 inches long. Hinged in the middle and folds back on itself. Locks in folded position with Velcro pads. Flips over to extended position and held by gravity. Handle positioned 7 inches up reacher with curved armrest at end. Tongs can grasp objects from pin to 3 1/2 inch wide. Folds to 19 inches for wheelchair stowage. 9 ounces. Can lift over two pounds. Voluntary closing....[More Information]
    
    
79. WINCESTER REACHER (MODELS K10326 & K10327) --- DISCONTINUED. (Verified 5/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Winchester Reacher, Models K10326 & K10327, is a retrieving device for persons with physical disabilities restricted to wheelchairs who have limited arm or hand strength. A locking mechanism eliminates the need for squeezing a trigger to grab or hold objects, while a removable extension acts as an arm brace requiring less arm strength for heavy objects. The unique grabbing unit spins 360 degrees while the outside mag...[More Information]
    
    

Page 1 of 1