Products are listed alphabetically.

Page 1 of 1

1. CHAIR LIFT TRANSPORTER (MODEL ST8250) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- Patient lift transports patient while in a sitting position. Immersible seat. Battery powered and foot operated or hydraulic lever on handle adjusts height from floor to 40 inches. Steel construction, safety belts, 2 optional seats: commode and standard. Dimensions: base; length 28 inches, depth 35 inches, maximum unit height 70 inches, minimum unit height 48 inches, optional IV pole and assembly. CAPACITY: Maximum weigh...[More Information]
   
   
2. COMFORT LIFT BED HOIST --- DISCONTINUED. (Verified 04/2009) RETAINED IN DATABASE FOR REFERENCE. --- Patient lift for bedside. Handheld remote control. Folds back against wall when not in use. Requires 3 feet along the attending side and on wall behind headboard. 5 feet high. 6 foot beam runs under bed from head to foot. Arm extends 3 feet over bed. Weight approximately 70 pounds. Powered by 12 volt battery, with hydraulic back up system. Used with standard slings. 300 pound maximum lift capacity. Battery not included....[More Information]
   
   
3. FUTURO PORTABLE PATIENT LIFT (MODEL 3347) --- DISCONTINUED. (Verified 04/2006) RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic patient lift. Base adjusts from closed position for passage through narrow doors and hallways to open position for general lifting and transfer. Hydraulic pump swivels for right or left side operation. One piece, white nylon contour seat with attaching straps. Swivel casters, gray rubber wheels, chrome plated frame. DIMENSIONS: Base width 22 1/2 to 40 inches, base height 8 inches, base length 41 inches, boom h...[More Information]
   
   
4. HANDI MOVE --- DISCONTINUED. (Verified 01/2005) RETAINED IN DATABASE FOR REFERENCE. --- Handi-Move is hydraulic powered overhead transfer lift designed for home, recreational, or institutional use by individuals with mobility disabilities. The unique stainless steel tubular frame slips under patient's arms, automatically fitting around the thorax as patient is lifted. Molded chest supports and leg straps secure person in lift. Models are available with mobile, portable wheeled frame with a U-shaped base; ...[More Information]
   
   
5. HANDI MOVE POOLSIDE HOIST --- DISCONTINUED. (Verified 01/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Handi Move Poolside Hoist is a hydraulic is a permanently-installed pool lift designed for use with individuals with mobility Disabilities. This lift features stainless steel support arms, chest supports, and adjustable leg supports. OPTIONS: Slings, head supports, Handi Move frame. DIMENSIONS: Height to top of mast is 47 inches. The boom can be raised to a maximum of 94 inches and lowered to 5 inches....[More Information]
   
   
6. HYDRAULIC PATIENT LIFT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic jack lifter mast with adjustable width base. For attendant use. Variety 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance. Nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included....[More Information]
   
   
7. HYDRAULIC PATIENT LIFT (GJ 1760) --- DISCONTINUED. (Verified 01/2013) RETAINED IN DATABASE FOR REFERENCE. ---Hydraulic jack lifter mast with adjustable width base. For attendant use. Variety of 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance. nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included....[More Information]
   
   
8. HYDRAULIC PATIENT LIFTER WITH ADJUSTABLE BASE (MODEL PC 7193A) --- DISCONTINUED. (Verified 10/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Hydraulic Patient Lifter with Adjustable Base, model PC 7193A, is a transfer lift with an incorporated hydraulic system and jack mast designed for attendant use, and to be virtually leakproof to ensure long term use. The adjustable lifter base may be widened. The entire unit is chrome plated, equipped with a swivel bar, canvas seat, and back sling. The lifter is set on 5-inch casters. CAPACITY: For individuals up to ...[More Information]
   
   
9. HYDRAULIC TRANSFER LIFT (MODEL 1070) --- DISCONTINUED. (verified 1/96) RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic jack lifter, mast with adjustable width base. For attendant use. Variety of 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance, nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included....[More Information]
   
   
10. LIFTER (MODEL 1.212) --- DISCONTINUED. (Verified 4/1998) RETAINED IN DATABASE FOR REFERENCE. --- Portable hydraulic patient lift. Hydraulic pump may be turned on mounting for left or right hand use. Masts, carrying frames and bars are welded rectangular tubes. Corrosion resistant. Blue or white powder coating. Dismantles without tools. Fits in standard car trunk. Strap type seat and backrest standard. Adjustable, locking U shaped base swivels for passing through narrow doors or turning round freestanding tubs. Base ...[More Information]
    
    
11. LIFTER (MODEL 1.213) --- DISCONTINUED. (Verified 4/1998) RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic patient lift for stationary use. Hydraulic pump may be turned on mounting for left or right hand use. Masts, carrying frames and bars are welded rectangular tubes. Corrosion resistant. Blue or white powder coating. Dismantles without tools. Fits in standard car trunk. Strap type seat and backrest standard. Floor mounted mast swivels on its own axis. Boom length 36 inches. Tip of boom lowest point 37 inches, hig...[More Information]
    
    
12. PASSPORT PATIENT LIFT SYSTEM --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Hydrualic patient lift fabricated of painted steel tubing. Height adjustable using hand operated lubrication free system. Dimensions: 30 inches long by 27 inches wide by 40 inches high. Maximum weight capacity 360 pounds. Front casters have locking wheel brakes. Split sling seat standard. Options include stretcher attachment, scale attachment. Can be folded to fit in trunk of car. Other styles of canvas seats available....[More Information]
    
    
13. PATIENT LIFT (MODEL PA0401) --- DISCONTINUED. (Verified 4/2000) RETAINED IN DATABASE FOR REFERENCE. --- Hydraulic patient lift. Lifting capacity 300 pounds, made of heavy gauge triple chrome plated steel tubing, 4 inch non-marking casters with rear brakes, one piece sling included, base adjusts from 22 1/2 to 40 inches. ....[More Information]
    
    
14. PORTO LIFT (MODEL PL1) --- DISCONTINUED. (Verified 08/2007) RETAINED IN DATABASE FOR REFERENCE. --- Patient lift with oil hydraulic system with hand pump. Lifts from floor to 4 foot height. Chest height straight lifting bar, chains attach to slings. Base has 5 casters, foot operated adjustable width U-shape base, 22 to 40 inches. Chrome plated. Maximum capacity, 300 pounds, heavy duty units on special order. Mast separates from base for transport. See separate entries for available slings and bathtub attachment. Atten...[More Information]
    
    
15. SAMSON MOBILE HOISTS --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Samson Mobile Hoists are mechanical or hydraulic transfer lifts designed for use by individuals with mobility disabilities. These lifts are available in manual or powered models, are available with a variety of slings, and can be used in a variety of settings, including transfers to and from bed, wheelchair, toilet, and the floor. POWER: The powered models use 24-volt direct current. OPTIONS: Electric width adjustme...[More Information]
    
    
16. TRAVEL LIFTER (MODEL C-TL) --- DISCONTINUED. (Verified 5/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Travel Lifter is a portable transfer lift designed to assist individuals with mobility disabilities. It features an adjustable base width to accommodate wheelchairs and can be ordered with a mechanical or hydraulic jack. It is designed for quick set-up and fits in the trunk of a car. The lift is available with 3-, 4- or 5- inch casters. DIMENSONS: 23 to 30.5 inch (base width). CAPACITY: 300 pounds. WEIGHT: 46 pounds....[More Information]
    
    
17. TRAVEL LIFTER (P-TL-10-C) --- DISCONTINUED. (Verified 5/2001) RETAINED IN DATABASE FOR REFERENCE. --- Lift with adjustable base for entering and exiting automobile or bed. Lift itself has 2 piece canvas seat and back construction secured together with hanger chains element in front of occupant. Chains attach to bar which in turn is connected to base of lift. Base width adjusts from 23 to 30 1/2 inches. Foot brakes on 2 casters. Maximum capacity is 300 pounds. Portable, boom and jack separate from lift for transporting. P...[More Information]
    
    
18. VERSA-LIFT (MODEL SN 100) --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- The Versa-Lift, model SN 100 is an hydraulic transfer lift designed for one person operation for lifting and transferring. Maximum lift capacity 550 pounds. No belts required to place under patient. Lifts to and from bed, chair, floor, toilet, bathtub. Quick lock device allows for patient positioning from sitting to lying. Knee piece keeps legs flexed, if spastic or for ease in toiletting. Floor and wall mounted Versa L...[More Information]
    
    

Page 1 of 1