Products are listed alphabetically.

Page 1 of 1

1. ADJUSTABLE WHEELCHAIR HEAD REST --- DISCONTINUED. (Verified 2/2000) RETAINED IN DATABASE FOR REFERENCE. --- Chrome plated tubular steel hardware clamps to wheelchair push handles and adjusts to fit any width of chair. Rubber padded cylindrical headrest adjusts up and down, tilts forward and back, and removes for transfers....[More Information]
   
   
2. ADJUSTABLE WHEELCHAIR HEAD SUPPORT (MODEL BK1247) --- DISCONTINUED. (Verified 09/2012) RETAINED IN DATABASE FOR REFERENCE. ---Adjustable headrest. Chrome plated tubular steel frame attaches to wheelchair handles. Soft rubber padded V shaped headrest attached to frame. Velcro head strap included....[More Information]
   
   
3. BOLT ON HEADREST (MODEL PR4045X) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Bolt on Headrestis a headrest designed for use with the Everest and Jennings Premier Classic wheelchair. The headrest is 10 inches high, covered with leatherette, and includes permanently attached headwings padded with .5-inch foam....[More Information]
   
   
4. CUSTOM RECLINER HEAD CONTROL (SERIES 200) --- DISCONTINUED. (Verified 5/2004) RETAINED IN DATABASE FOR REFERENCE. --- These Head Controls are positioning accessories for the Gunnell wheelchairs. There are many different head support options: 202 Cut Wings, Straight Up used for additional lateral head support above head height of the wheelchair, 208 Removable Curved Headrest for minimal or occasional head support; the size varies with seat, 210 Head Wedge used to achieve neck flexion, 216 Neck Yoke with Hardware, Large for lateral head c...[More Information]
   
   
5. HEAD CUSHIONS (MODEL 04-2000) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Foam headrest with naugahyde cover, webbing with double buckle for positive rear fastening. Cushion is self centering and fits all chair widths. Double knit or synthetic lambswool cover available....[More Information]
   
   
6. HEADREST --- DISCONTINUED. (Verified 10/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Headrest is designed for use by individuals who use wheelchairs. This add-on unit laterally stabilizes the head and masintains it in midline. The unit can be raised and lowered secures to the wheelchair backrest with a strap with a quick-release buckle. This headrestr includes a removable, machine-washable cover. DIMENSIONS: Available in 3 inches, 3.75 inches, or 4.75 inches deep....[More Information]
   
   
7. HEADREST --- DISCONTINUED. (Verified 2/93) RETAINED IN DATABASE FOR REFERENCE. --- U shaped molded foam headrest. Corduroy, plaid or white cover. 17 inches long by 14 inches wide by 5 1/2 inches high....[More Information]
   
   
8. HEADREST EXTENSION --- DISCONTINUED. (Verified 03/93) RETAINED IN DATABASE FOR REFERENCE. --- Headrest extension adds 17 1/4 inches to wheelchair back height. Can be removed when not in use. Specify chair color and style....[More Information]
   
   
9. HEADREST EXTENSION (MODEL P 6033) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Headrest extension provides 15 inches of back height to adult and junior model wheelchairs. Mounting brackets attach to main frame under the handle on chair. Brackets have sockets to accommodate extension tubes. Available for economy, standard and premium lines but it must be specified when ordering for which series, color, and size chair....[More Information]
   
   
10. HEADRESTS & MOUNTING HARDWARE --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- Headrest pad in flat style or 3-piece style in 2 sizes. Aluminum headrest mounting brackets with dual ball joint or vertical adjustment only. Mounts to solid back, easily removeable. $129.00 to $65.00 pads, $ 73.00 to $45.00 brackets....[More Information]
    
    
11. HOOK ON HEADREST (MODELS HHK-A-E-08, HHK-N-E-08) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Hook On Headrest, Models HHK-A-E-08 and HHK-N-E-08, is designed to attach to the back of a wheelchair and extend the standard back height by 13 inches. It is made of duraliner reinforced leatherette, and will fit all standard back models....[More Information]
    
    
12. MACS MULTI ADJUSTABLE CRANIAL SUPPORT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Headrest consists of either contoured or horseshoe shaped form for lateral head stability. Cushioned vinyl mounted on tubular rod. Rod has two positive locking mounts allowing rod and headrest to be bent in many positions. Sizes: 6 1/2 by 10 1/2 inches, 4 inches high by 6 inches diameter or 5 inches high by 9 inches diameter....[More Information]
    
    
13. MODULAR POSITIONING ACCESSORIES: HEADREST (MODEL 3030), HEADWINGS (MODELS 3031R & 3031CR), & 3031O CURVED NECKREST --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Modular positioning accessories may be used on classroom chairs, wheelchairs, or any seating system. Headrest 3030: Height and width adjustable for correct head positioning; velcro strap attaches around most chair backs. Headwings 3031R: Attaches to tublar back frame of chair; multi position pads adjust in height, depth, width, and angle; swing up for exit; pads are 4 by 6 inches. 3031O pads are 5 by 8 inches, oval; curved neckrest and he...[More Information]
    
    
14. ORTHO REHAB HEADREST (MODEL 3030) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Headrest with side wings for wheelchairs, adjustable in height and weight. Can also be used as adductor or abductor leg positioners. Vinyl- covered, foam blocks, attached to web strap for mounting on wheelchair....[More Information]
    
    
15. QUAD HEADREST (MODEL 32655) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Quad Headrest, Model 32655, is a headrest for wheelchairs designed for use by people who are quadriplegic. The adjustable headrest mounts to solid or sling back wheelchairs, and its vertical posts slide into open-ended frame tubes on chairs with welded-on push handles, such as those on reclining back chairs. The vinyl-coated foam pad has minor lateral adjustment, and the unit adjusts to fit different width chairs. WA...[More Information]
    
    
16. SELF CENTERING HEADREST (MODELS HSC-A-F & HSC-N-F) --- DISCONTINUED. (Verified 9/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Self Centering Headrest, Models HSC-A-F and HSC-N-F, is a headrest designed to mount to wheelchair back uprights. The headrest is adjustable in height, is leatherette covered, and comes with a self-centering bolt and tapered padding in order to help maintain the head in mid line position....[More Information]
    
    
17. UNIVERSAL WHEELCHAIR HEADREST (MODEL 32470) --- DISCONTINUED. (Verified 4/2001) RETAINED IN DATABASE FOR REFERENCE. --- The Universal Wheelchair Headrest, Model 32470, is a headrest designed for use with wheelchairs. This headrest is contoured with a vinyl-coated foam pad and mounts to any standard wheelchair push handles with adjustable hardware. The headrest features adjustable height and lateral positioning, and will accommodate different width chairs. WARRANTY: The manufacturer warrants this product to be free of defects in materials ...[More Information]
    
    

Page 1 of 1