Products are listed alphabetically.

« Previous page    Page 2 of 2

26. RETRACTABLE HEADREST SYSTEM (MODELS 06-1 & 06-1S) Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding ...[More Information]
    
    
27. SEATING ACCESSORY SYSTEMS (MODEL 6800) The Seating Accessory System, ##6800, is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support. The chest support's lap belt goes through existing strap holes and the bar fits around the seat and is secured with channel brackets (included). SIZES: Small, with lateral head support provided by foam pads, wedged and formed, to cradle the head; Medium and Large, both with full C Collar for side su...[More Information]
    
    
28. SLEEPY TIME HEADREST The Sleepy Time Headrest is a head and neck support designed for use by for children with neurological or physical disabilities sitting in car seats. Covered with cotton fabric, this support has a polyester fill that cradles the child's head and neck in all directions, without confining head movement. The Sleepy Time Headrest can be used in car seats, booster seats with backs, infant carriers, strollers, infant swings, wheelchairs, and feeder chairs. SIZES: Infant (for children up to 25 pound...[More Information]
    
    
29. SO SOFT DEEP U HEADREST (MODEL SSDU100) The So Soft Deep U Headrest, model SSDU100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs and need to keep their heads positioned upright and centered. This unit has aggressive laterals for maintaining head position, tapered for minimal interference of vision. The headrest has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure reli...[More Information]
    
    
30. SO SOFT OVAL HEADREST (MODELS SSO100S & SSO200L) The So Soft Oval Headrest, models SSO100S and SSO200L, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The headrest has a contoured shape for lateral support. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. The headrest comes with a zippered Triptex cover. SIZES: Small (SSO100S) or large (SSO200L). DIMENSIONS: 11 x 5 in...[More Information]
    
    
31. SO SOFT QUAD HEADREST (MODEL SSQ4100) The So Soft Quad Headrest, model SSQ4100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The unit is slightly contoured for comfort and positioning. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. This headrest comes with a zippered Triptex cover. DIMENSIONS: 9 x 6.5 inches....[More Information]
    
    
32. STANDARD CURVED PADDED HEADREST (MODEL HRC100) The Standard Curved Padded Headrest, model HRC100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. It has a contoured U shape for positioning, and foam padding with a zippered Triptex cover. DIMENSIONS: 11 x 4 inches. Padding is 2.5 inches deep....[More Information]
    
    
33. STEALTH COMFORT PLUS HEADREST (MODELS ASL909 & ASL910) The Stealth Comfort Plus Headrest is a wheelchair headrest designed for use by individuals with mobility disabilities. This large padded headrest comes with fixed mounting hardware. Padded with dual layers of premium foam, this headrest comes with a plush slip-on Darlexx cover. It has a metal back and comes with half-inch square Otto-Bock style headrest hardware. OPTIONS: Flipdown headrest hardware (model ASL617); ajustable/removable headrest hardware (model ASL623). DIMENSIONS: model ASL909 is ...[More Information]
    
    
34. STEALTH ELITE HEADREST (MODEL SM-SE210) The Stealth Elite Headrest, model SM-SE210, is a headrest designed for use by individuals who use wheelchairs. This headrest is intended for individuals who do not need a midline cue. The two lateral swing-away components can be used for switch mounting and if a sensor is added in the backpad, it can also be equipped for computer access....[More Information]
    
    
35. STEALTH ULTRA HEADREST (MODEL SM-SU200) The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad. ...[More Information]
    
    
36. SWEEP HEADREST (MODEL 6830) The Sweep Headrest, ##6830, is a wrap around headrest with an occipital convex foam cushion built in across the bottom of the center pad to cradle the head. The support has two small wings that form the sides, angled at 60 degrees off center back pad. The heavy duty back plate has pre-threaded 1/4-20 metal inserts for mounting and eight 1-inch bushings which can be used as spacers to adjust the distance of the headrest to the head. An optional installation kit is available ($169 including headre...[More Information]
    
    
37. TOP MOUNT MULTIPLE ADJUSTMENT HEADREST BRACKET AND PADS Three custom size pads mounted on angled Kydex or aluminum bracket which attaches to shoulder height solid back. Mounting knob in solid back secures headrest, allowing it to be removed. Hardware allows height, tilt, and forward and back adjustment. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately. Components: $50.00 to 40.00 brackets, $134.00 headwing bracket and pads....[More Information]
    
    
38. VERTICALLY ADJUSTABLE SOLID BACK MOUNT HEAD/NECK SUPPORT (MODEL 107-1000) & MULTI ADJUST HEAD/NECK SUPPORT (MODEL 107-2000) Head and neck support component for adaptive positioning. 4 3/4 inch range of vertical adjustment, or Multi Adjust mounts with bracket to permit vertical, front to rear, tilt and rotational adjustment. 1/4 inch ABS plastic, with separate removable foam pad. Shape allows posterior support at the occiput and rotational control without ear irritation. Mounts on solid back. Sizes: small, medium, large and extra large. Options: custom sizes, hydrocephalus modification, off set mounting. Accessories: ...[More Information]
    
    
39. ZIPPIE HEAD AND NECK TELESCOPING SUPPORT SYSTEM Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back....[More Information]
    
    

« Previous page    Page 2 of 2