Products are listed alphabetically.

« Previous page    Page 2 of 2

26. NE-AT QUICK RELEASE MINI TRAP ASSEMBLY The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches....[More Information]
    
    
27. NE-AT USER ADJUSTABLE LATERAL (NE-ATURAL) BRACKET MOUNT The NE-AT UseR Adjustable Lateral (NE-ATURAL) Bracket Mount is lateral trunk support hardware designed for use by individuals with neurological or severe physical disabilities or cerebral palsy. This width-adjustable lateral bracket mount interfaces with most commercial and custom seating systems and converts most commercial and custom lateral brackets into lateral brackets that can be adjusted in width by the user or caregivers to make room for winter jackets or sweaters. Existing swing away o...[More Information]
    
    
28. NE-AT YA (YET ANOTHER) TRAY MOUNTING BRACKET The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs....[More Information]
    
    
29. POSITIONING HARDWARE Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six...[More Information]
    
    
30. QUICK CLAMP. Mounting clamps for removing solid wheelchair seat and back. Attach to wheelchair frame. Keeps wheelchair seat and back securely in place. Twist the lock and both seat and back slide out to fold the wheelchair. Black finish. Available in 3/4 inch, 7/8 inch or 1 inch sizes. ....[More Information]
    
    
31. QUICK RELEASE HARDWARE KITS The Quick Release Hardware Kits are silver or black chrome plated hardware sets for mounting seat or back accessories to 7/8- or 1-inch tubing wheelchair frames. The kits include frame clamps with lugs, quick release brackets with spring-loaded knobs, and T-nuts and bolts for mounting to solid seat or back panels. Components may also be ordered separately....[More Information]
    
    
32. SEAT AND BACK MOUNTING HARDWARE, DROP HOOKS, DROP HOOK STOPS, BACK TO SEAT BRACKETS Complete line of seating hardware for mounting backs, seats, lateral trunk supports, abductors, headrests, leg and footrests in wheelchairs and other mobility bases. Adjustable and non-adjustable, knob-release and drop hook styles. May be ordered in complete kits or by individual components. Optional components $93.00 to $2.00....[More Information]
    
    
33. SEAT-TO-BACK BRACKETS The Seat-to-Back Brackets are stainless steel brackets designed for rigidly attaching a solid seat and back to each other at 80-degree (model BS-6080), 85-degree (model BS-6085), 90-degree (model BS-6090), 95-degree (model BS-6095), or 100-degree (model BS-6000) angles....[More Information]
    
    
34. SEATING HARDWARE Seating Hardware is designed for use with wheelchairs. This hardware is made of steel and includes 90-degree brackets and J-hooks (sold separately). DIMENSIONS: All hardware has 0.5-inch spacing, COLOR: Black....[More Information]
    
    
35. SEATING HARDWARE Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel....[More Information]
    
    
36. SEATS AND HARDWARE The Seat and Hardware are custom size solid seat made with solid core plywood and dual density foam, covered with vinyl upholstery. Custom modifications include special foam, no foam, anti-thrust seat, waterfall front, or leg length discrepancy. Mounting hardware options include a variety of hooks, fixed angle, or elevating adjustable, in stainless steel and black chrome. DIMENSIONS: 1/2 inch plywood and 1.5 inch foam. COLORS: 52 colors available...[More Information]
    
    
37. SIDE CUSHIONS The Side Cushions are part of a custom seating and positioning system for individuals who use wheelchairs. The cushions are available in two styles, loose or attached to solid back insert. The cushions may be ordered to custom size specification, straight or tapered with or without hard backing. The cushions also come with a pair of straps to attach under wheelchair armrest pad, or can be ordered with ABS (adductor brackets) plastic clips to hook over armrest skirt guard. Side cushions attach to...[More Information]
    
    
38. SLIDING HEADREST BRACKET The Sliding Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury or cerebral palsy. It is added to a headrest on a seat or wheelchair to enable headrest adjustments. This slotted interface bracket allows the headrest to be offset to either side, with infinite lateral adjustment up to 2 inches for an Otto Bock or NE-AT Headrest Bracket (see separate entry). This bracket attaches to the seating system using the existing h...[More Information]
    
    
39. SOLID BACK Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m...[More Information]
    
    
40. SOLID SEAT Custom size solid seat with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and abductor mounting. Custom foams available. Modifications available include anti-thrust seat, leg length discrepancy, and built-in abductor. May be ordered without aluminum hardware, or mounted to chair with cinch straps, stationary knob- release hardware, adjustable angle knob-release hardware, non- adjustable drop hooks, or adjustable ...[More Information]
    
    
41. TRUNK PAD SYSTEMS AND BRACKETS The Trunk Pad System and Brackets assist with designing custom seating and positioning for individuals in a wheelchair. The pads are kidney shaped and come three basic sizes large, medium and small. Additionally, special shapes or forms and semi-curved pads are available upon request. The pads are made from plywood and dual density foam, covered with naughyde. Brackets included for mounting to the underside of arm tube or back upright, or solid back insert. The brackets can be ordered fixed or r...[More Information]
    
    
42. UNIVERSAL BRACKET SYSTEM The Universal Bracket System is a set of brackets designed for mouting trays and lapboards on wheelchairs. These lightweight brackets are height- and width-adjustable to fit any wheelchair with standard arms. The rust- and corrosion-resistant brackets are removable for transfers and emergencies and they feature safety stops to prevent the tray from being pushed into the user....[More Information]
    
    
43. ZIPPIE HEAD AND NECK TELESCOPING SUPPORT SYSTEM Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back....[More Information]
    
    
44. ZIPPIE HIP PADS & FULL SIDE PADS Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only....[More Information]
    
    
45. ZIPPIE TRUNK SUPPORT PAD AND BRACKET Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black on...[More Information]
    
    

« Previous page    Page 2 of 2