Products are listed alphabetically.

« Previous page    Page 2 of 2

26. SLIM LATERAL STABILIZERS (MODELS 6312, 6312SC, 6316, & 6316SC) The Slim Lateral Stabilizers are lateral trunk supports designed to promote proper trunk alignment for wheelchair users who lean laterally. These slim bolsters are intended for use with larger or obese individuals and are available with removable, washable cotton covers (models 6312 and 6316) or Stap-Chek vinyl (models 6312SC and 6316SC). The 6312 models are designed for use with wheelchairs with desk-length arms and the 6316 models are designed for use with wheelchairs with full-length arms. DI...[More Information]
    
    
27. SLIM SUPPORTS (MODELS 6322 & 6323) Slim Supports are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs or geri chairs. Constructed of plywood and padded foam and covered in wipe-clean vinyl foam, model 6322 fits standard wheelchairs and secures with Velcro straps and model 6323 fits inside the armrests of geri chairs....[More Information]
    
    
28. SLIP-ON NEOPRENE TRUNK LATERAL PAD The Slip-On Neoprene Trunk Lateral Pad is lateral trunk support pad designed for people with neurological or mobility disabilities or cerebral palsy. The pad is intended to protect and provide comfort to users of lateral trunk supports. The pad is made of extra thick neoprene rubber, which is cushy, waterproof, and can conform to curves. Each pad can be cut to fit a specific support. The neoprene is bonded on the outside to a stretchy fabric and on the inside to loop Velcro that can fix the pad...[More Information]
    
    
29. SNUG SUPPORTS (MODELS 706310 & 706311) The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs. These supports are placed inside the wheelchair to provide support and reduce lateral leaning. They also serve to reduce the interior space in the chair, adapting a standard chair for the needs of a smaller user. These supports feature a foam-padded plywood frame and a spray-and-wipe clean vinyl cover. Adjustable straps permit attachment to any wheelchair. Model 706310 is a pair of supports and mod...[More Information]
    
    
30. SOLID I BACK MOUNT TRUNK SUPPORTS (MODEL 105-1000) Lateral trunk support for adaptive positioning. 1/2 inch plywood base with 1 inch neoprene foam padding covered with Naugahyde, shelterlite, or synthetic lambswool pads. Pads are straight, not contoured, with L shaped brackets to allow vertical and horizontal adjustment. Designed to be used with an I Back. Sizes: 4 inches long by 3 inches high, 5 inches long by 4 inches high, 6 inches long by 5 inches high, 7 inches long by 6 inches high. Custom sizes available....[More Information]
    
    
31. SWING AWAY PIVOT LOCK, BACK BAR MOUNT TRUNK SUPPORT (MODEL 105-3000), & SWING AWAY PIVOT LOCK SOLID I BACK MOUNT (MODEL 105-4000) Trunk support component for adaptive positioning. 1/4 inch contoured ABS plastic base with separate removable pads. Positive locking pivot mechanism. Wide range of vertical, horizontal and front to rear adjustment. Pads can be oriented to body to minimize undistributed pressure. Back bar mounts attach to back frame of wheelchair, Solid I Back Mount attaches to solid back insert with special bracket. Sizes: small 3 inches high by 6 inches long, medium 3 inches high by 7 inches long, large 4 inche...[More Information]
    
    
32. SWING AWAY TRUNK SUPPORTS AND BRACKETS Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with hinges. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Can be ordered with 2 hinges, for stationary rear pads, or 4 hinges, for greater ease of transfers. Pads are 1/2 inch thick medium density foam and 1/2 inch birch plywood. May be o...[More Information]
    
    
33. SWING AWAY TRUNK SUPPORTS WITH LOCKS Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with spring loaded aluminum locking mechanisms. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Locking mechanisms allow rear pads to lock into a stationary position for support while front pads are able to swing open. When unlocked, all fou...[More Information]
    
    
34. SWING OPEN LOCKING TRUNK SUPPORTS AND BRACKETS One pair of custom size pads and custom bent Kydex brackets with spring loaded aluminum locking mechanism. Pads swing away for transfers when released, and lock securely. Secured to solid back with bolts through threaded inserts. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood....[More Information]
    
    
35. SWINGAWAY LATERAL SUPPORTS Lateral supports that can be mounted on LaBac Systems sliding back, on chairs with upholstery mounted on the front of the back posts, and on chairs with upholstery mounted on the back of the back posts. Swingaway feature offers quick client access. Pads available in 3 by 4 inches, 4 by 4 inches, 4 by 5 inches, 4 by 6 inches. Made of molded plastic shell with foam pad. Naugahyde cover. Additional intermediate brackets available....[More Information]
    
    
36. SWINGAWAY LATERAL TRUNK SUPPORT (MODELS 31425, 31423, & 32492) The Swingaway Lateral Trunk Support is designed to provide positioning support for people who use wheelchairs.Model 31425 is a Swingaway Kit with Pad and includes tapered L brackets, a swing-away hinge, an extender, all mounting hardware, and the support pad. The brackets can be arranged in a variety of configurations for flexibility and growth. The extender bracket permits extra flexibility in any direction. The supports flip out of the way while entering and exiting the chair and they have sin...[More Information]
    
    
37. TRUNK PAD Lateral trunk support pads. Naugahyde covered foam. T nuts with 1 or 2 inch spacing for mounting to brackets. Curved rectangular, or pear- shaped pad. 3 to 6 inches high by 4 to 7 inches deep....[More Information]
    
    
38. TRUNK PAD SYSTEMS AND BRACKETS The Trunk Pad System and Brackets assist with designing custom seating and positioning for individuals in a wheelchair. The pads are kidney shaped and come three basic sizes large, medium and small. Additionally, special shapes or forms and semi-curved pads are available upon request. The pads are made from plywood and dual density foam, covered with naughyde. Brackets included for mounting to the underside of arm tube or back upright, or solid back insert. The brackets can be ordered fixed or r...[More Information]
    
    
39. TRUNK SUPPORTS AND BRACKETS Custom size trunk pads mount to solid back with T-nuts and bolts, or clamp to wheelchair uprights. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. Brackets are Kydex ($206) or aluminum ($195) and are bent to custom angles. Back-mounting brackets are slotted to allow adjustment of width, and adjust in height by relocating. May be ordered complete, or brackets and pads may be ordered separately....[More Information]
    
    
40. WHEELCHAIR SIDE SUPPORT The Wheelchair Side Support is a lateral trunk support designed for use with individuals with balance disabilitieis. Made of closed-cell foam, the support can be modified with an electric knife and can be used on the right or left side individually or on both sides. OPTIONS: Short or long torso support inserts. DIMENSIONS: The optional short torso support is 6 inches long and the optional long torso support is 9 inches long....[More Information]
    
    
41. WHEELCHAIR SIDE SUPPORT (MODELS ALI1240 & ALI1241) Wheelchair Side Support provides lateral torso support for wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. These vinyl-covered foam bolsters reduce a standard 18-inch wide seat to 16 inches wide, thereby improving lateral support and reducing side-to-side rocking that can cause skin damage. Bolsters are available for high-back wheelchairs (model ALI1241) or for standard and desk-length arm wheelchairs (model ALI1240). DIMENSIONS (HxLxW): 1 x 15 x...[More Information]
    
    
42. WHEELCHAIR SIDE WINGS (MODELS 706320 & 706322) The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs and lean bilaterally. These rigid-frame wings are padded with foam and covered in wipe-clean vinyl and attach to most wheelchairs, providing support at the shoulder level. Model 706320 is the Standard Support model. Model 706322 is the X-tra Support model which features integral armrest pads which fasten the bottom of the wings to the wheelchair armrest frame to provide additional support for larger...[More Information]
    
    
43. WHEELCHAIR WING BACKS (MODEL 6321) Wheelchair Wing Backs, model 6321, are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs. Constructed of plywood and padded in foam and covered in wipe-clean vinyl, these wings attach to the screws on the wheelchair back to provide support without taking up seating space. The angle may be adjusted to accommodate user needs. DIMENSIONS (WxL): 8 x 10 inches....[More Information]
    
    
44. ZIPPIE TRUNK SUPPORT PAD AND BRACKET Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black on...[More Information]
    
    

« Previous page    Page 2 of 2